ヨネキン List of Products and Services

It maintains a gap of about 2mm with the elasticity that lifts the decorative slate, preventing the re-adhesion of the coating. When stepped on near the REEVSPASER during work, it compresses to 1.3mm, reducing the concern of cracking the decorative slate due to unevenness. Once the load is removed, it repeatedly lifts the decorative slate.

• Plastering and painting work

We offer a wide range of "reduced construction materials" for roof water drainage. In addition to ridge caps and corner caps, we have eaves water drainage, gable caps for Y-202, wall stops, three-way caps, square crowns, and more in our lineup. Different angles and lengths are treated as custom orders. Please feel free to contact us when placing an order. 【Partial Lineup】 ■ Ridge Cap 24 ■ Corner Cap 24 ■ Ridge Cap 24 (with 90-degree drop) ■ Gable Ridge Cap 24 ■ Eaves Water Drainage Outside Corner *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We would like to introduce the "Valley Board Water Drainage and Snow Stopper Hardware" handled by Yonekkin. Our lineup includes the "Discard Valley Board Water Drainage (Small)," "Valley Board for Western Tiles," "Valley Board for Roof Tiles," and "Valley Board Water Drainage for Decorative Slate (Large)," among others. Additionally, the material for the snow stopper hardware is SUS304, and the color is black. Please note that variations in angle and length are treated as custom orders. 【Partial Lineup】 <Valley Board Water Drainage> ■ Valley Board Water Drainage (Small) ■ Valley Board Water Drainage (Large) ■ Valley Board for Western Tiles ■ Valley Board Water Drainage for Decorative Slate (Large) ■ Valley Board for Roof Tiles *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

At Yonekkin, we offer a wide range of "discard board water cuts." Starting with "Discard Board Water Cut 18," we also have "Rain-Press Compatible Discard Boards," "L-Type Discard Boards," "Discard Boards for Western Tiles," and "Joint Discard Boards for Western Tiles" in our lineup. Different angles and lengths are available as custom orders. Please feel free to contact us when you need assistance. 【Partial Lineup】 ■ Discard Board Water Cut 18 ■ Discard Board Water Cut 23 ■ Rain-Press Compatible Discard Board ■ L-Type Discard Board ■ Discard Board for Western Tiles ■ Joint Discard Board for Western Tiles *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We would like to introduce the "Mune-gumi, Katamune, and Ameoshi Mizukiri" handled by Yonekinn. Starting with "Mune-gumi 24," we also offer "Steep Slope Mune-gumi 30," "Mune Corner 70," "Ameoshi Mizukiri 70," and "Noshi Mizukiri," among others. Different angles and lengths are treated as custom orders. Please feel free to contact us when you need assistance. 【Product Lineup (Partial)】 ＜Mune-gumi and Katamune＞ ■ Mune-gumi 24 ■ Steep Slope Mune-gumi 30 ■ Mune Corner 70 ■ Katamune 80 ■ Katamune 100 *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We would like to introduce the "Eaves Water Drainage, Wide Small Dance Cap, and Gable Water Drainage" handled by Yonekina. We offer a lineup that includes "Eaves Water Drainage for Snow Country (with Horns)," "Wide Small Dance Cap 15×15×45," and "Gable Water Drainage 60," as well as "Gable for Overlapping Roofing." Please note that variations in angle and length are treated as custom orders. 【Partial Lineup】 <Eaves Water Drainage> ■ Eaves Water Drainage for Snow Country (with Horns) ■ Eaves Water Drainage for Snow Country <Wide Small Dance Cap> ■ Wide Small Dance Cap 15×15×45 *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

At Yonekkin, we offer a wide variety of "eaves water drainage" products. In addition to 35×55 (90°), 35×65 (90°), and 45×55 (90°), we also have eaves arabesque R and eaves water drainage for overlapping roofing in our lineup. Please note that different angles and lengths are treated as custom orders. Feel free to contact us when you need assistance. 【Partial Lineup】 ■ Eaves Water Drainage 35×55 (90°) ■ Eaves Water Drainage 35×65 (90°) ■ Eaves Water Drainage 45×55 (90°) ■ Eaves Water Drainage 35×55 (120°) ■ Eaves Water Drainage 35×65 (120°) *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We would like to introduce our ceramic tile shallow construction method, the "Roof Board Ventilation VTN Series." Roof board ventilation can be installed between the roof board and the tiles. It allows for ventilation through the small gaps in the tiles, enabling the expression of a beautiful roof. Additionally, it can flexibly accommodate various roof slopes and shapes, making it suitable for efficient ventilation planning. 【Features】 ■ Can be installed between the roof board and the tiles ■ Allows for ventilation through the small gaps in the tiles ■ Enables the expression of a beautiful roof ■ Flexibly accommodates various roof slopes and shapes ■ Suitable for efficient ventilation planning *For more details, please refer to the PDF materials or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We handle the "Tile Ventilation Ridge Sumikaze SUV-F." The main body length is 850mm, and the effective ventilation area is 175cm² per unit. Additionally, it is compatible with roof slopes ranging from 4.0 to 6.0 inches. During installation, please create a ventilation opening at the top of the roof, and after installing the Sumikaze main unit, install the flat tile cover. 【Specifications】 ■ Sumikaze main body length: 850mm ■ Material: Wear-resistant color GL black ■ Standard attic area: 175cm² per unit ■ Effective ventilation area: 28m² ■ Compatible roof slope: 4.0 to 6.0 inches ■ Cover length for flat tiles: 950mm *For more details, please refer to the PDF document or feel free to contact us.

• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We would like to introduce the "Tatekaze Rain Restraint SSGV Series" that we handle. There are two product lengths: 2,020mm and 1,110mm. It comes with 5 or 3 mounting screws, 1 face plate, and 1 drainage cut. Additionally, we also offer the "Tatekaze Fireproof Rain Restraint (with heat-expandable material)" made from butyl rubber containing graphite. Please feel free to contact us when you need assistance. 【Product Lineup】 <Tatekaze Rain Restraint> ■SSGV-200 ■SSGV-100 <Tatekaze Fireproof Rain Restraint> ■SSGVBD-200 ■SSGVBD-100 *For more details, please refer to the PDF document or feel free to contact us.

• Galvanized steel sheet
• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

The "Vertical Wind Single Slope SSKN Series" is a flat metal roofing material that accommodates slopes from 0.5 to 6.0 inches. We offer the "SSKN-200" with an effective ventilation area of 170 cm² per unit and the "SSKN-100" with 85 cm² per unit. This product is made to order, so the delivery time is approximately 10 business days. Additionally, we also provide a fire-resistant version for vertical wind single slopes (with heat-expandable material) made from butyl rubber containing graphite. 【Product Lineup】 <Vertical Wind Single Slope> ■SSKN-200 ■SSKN-100 <Fire-Resistant Vertical Wind Single Slope (with Heat-Expandable Material)> ■SSKNBD-200 ■SSKNBD-100 *For more details, please refer to the PDF document or feel free to contact us.

• Galvanized steel sheet
• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We handle the vertical metal roofing material "Tatekaze Ventilation Ridge SSV-A Series." It accommodates slopes from 0.5 to 6.0 inches, with product lengths available in two types: 2,008mm and 1,098mm. As it is made to order, the delivery time is from 10 business days. Additionally, we offer the "Tatekaze Fireproof Ventilation Ridge (with heat-expandable material)" made with butyl rubber containing graphite. 【Product Lineup】 <Tatekaze Ventilation Ridge> ■SSV-A200 ■SSV-A100 <Tatekaze Fireproof Ventilation Ridge (with heat-expandable material)> ■SSBD-A200 ■SSBD-A100 *For more details, please refer to the PDF document or feel free to contact us.

• Galvanized steel sheet
• Others/Roofing materials (shingles, cement, steel sheets, aluminum)

We would like to introduce the "Square Ventilation Tower HV-300," which is compatible with roof slopes ranging from 4.0 to 6.0 inches. The compatible roofing material is residential decorative slate with a thickness of 5mm or more, allowing for efficient exhaust from four directions. Included are 12 mounting screws and 4 drainage cuts (L=500mm). Additionally, since this is made to order, the delivery time will be 10 business days or more. 【Specifications】 ■ Material: Painted Galvalume steel plate 0.35t ■ Product dimensions: 542×542mm ■ Accessories: 12 mounting screws, 4 drainage cuts (L=500mm) ■ Effective ventilation area: 304.8cm² per unit ■ Standard attic area: 48.6m² per unit ■ Compatible roof slope: 4.0 to 6.0 inches *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

We would like to introduce our "Rain-Resistant Ventilation Components GV Series." We offer the "GV-200" with a product length of 2,060mm, the "GV-100" at 1,170mm, and the "GV-050" at 725mm. The compatible slope ranges from 2.5 to 10.0 inches. Additionally, we also have the "Heat-Expandable Material Rain-Resistant Ventilation Components GVBD Series," which uses graphite-containing butyl rubber. Please feel free to contact us if you have any inquiries. 【Product Lineup】 ■ GV (GVBD) -200 ■ GV (GVBD) -100 ■ GV (GVBD) -050 *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

We handle the "Single-Slope Ventilation Ridge KNV-A Series." It is compatible with color stainless steel of 0.35t. The compatible roofing material is residential decorative slate with a thickness of 5mm or more. We have products available for sizes ranging from 2.5 inches to 3.5 inches, 4.0 inches to 6.0 inches, 6.5 inches to 9.0 inches, and 9.5 inches to 10.0 inches. Please feel free to contact us when you need assistance. 【Product Lineup】 ■KNV-A200 ■KNV-A100 ■KNV-A050 *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

We handle the "Single Slope Ventilation Ridge KNV Series." The compatible roofing material is residential decorative slate with a thickness of 5mm or more, and we offer three product lengths: 1,980mm, 1,090mm, and 645mm. Additionally, we also offer the "Heat-Expandable Material Single Slope Ventilation Ridge KNBD Series," which uses graphite-containing butyl rubber. Please feel free to contact us when you need assistance. 【Product Lineup】 ■KNV (KNBD) -200 ■KNV (KNBD) -100 ■KNV (KNBD) -050 *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

The "Single-Slope Ventilation Ridge WKNV-A Series" is a custom-made roofing accessory that accommodates slopes from 2.5 inches to 6.0 inches. The compatible roofing material is residential decorative slate with a thickness of 5mm or more. When ordering brackets, please specify the roof slope in 0.5-inch increments. We offer the "WKNV-A200 (-3)" with an effective ventilation area of 300 cm² per unit and the "WKNV-A100 (-3)" with an effective ventilation area of 150 cm² per unit. 【Product Lineup】 <Nominal Size: 2P> ■ 2.5 inches to 3.5 inches: WKNV-A200-3 ■ 4.0 inches to 6.0 inches: WKNV-A200 <Nominal Size: 1P> ■ 2.5 inches to 3.5 inches: WKNV-A100-3 ■ 4.0 inches to 6.0 inches: WKNV-A100 *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

We would like to introduce our roof accessory "Ventilation Ridge SC Series." We offer three types: "SC-200" with a length of 1,980mm, "SC-100" with a length of 1,090mm, and "SC-050" with a length of 645mm. The materials used are painted Galvalume steel sheet of 0.35t and polypropylene resin. Additionally, since this product is made to order, the delivery time is approximately 10 business days. Please feel free to contact us when placing an order. 【Product Lineup】 ■SC-200 ■SC-100 ■SC-050 *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

We would like to introduce our "Steep Slope Ventilation Ridge VTS-K Series." It is compatible with slopes ranging from 7.0 to 12.5 inches, and is made of painted Galvalume steel sheet (0.35t) and polypropylene resin. We offer three product lengths: 1,980mm, 1,090mm, and 645mm. Additionally, since this product is made to order, the delivery time will be approximately 10 business days. Please feel free to contact us if you have any inquiries. 【Product Lineup】 ■VTS-K200 ■VTS-K100 ■VTS-K050 *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

We handle the "Ventilation Ridge with Heat-Expanding Material BD Series." The materials used are painted galvalume steel plate 0.35t, polypropylene resin, and graphite-containing butyl rubber. The compatible roofing materials are residential decorative slate with a thickness of 5mm or more, and it can accommodate color stainless steel 0.35t. Please feel free to contact us when you need assistance. 【Lineup】 ■BD-200 ■BD-100 ■BD-050 *For more details, please refer to the PDF materials or feel free to contact us.

• Decorative slate
• Galvanized steel sheet

We would like to introduce our "VTS Series Ventilation Ridge." It is compatible with residential decorative slate roofing materials with a thickness of 5mm or more and can accommodate slopes ranging from 2.5 to 10.0 inches. The material is painted Galvalume steel plate of 0.35t and polypropylene resin. Additionally, there are three product lengths available: 1,980mm, 1,090mm, and 645mm. Please feel free to contact us when you need assistance. 【Product Lineup】 ■VTS-200 ■VTS-100 ■VTS-050 *For more details, please refer to the PDF document or feel free to contact us.

• Decorative slate
• Galvanized steel sheet