サノテック List of News Articles

【New Application】Introducing a case where "arsenic" contained in contaminated sludge was removed to below environmental standards (MAG PICKER / utilizing wet methods) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, allowing for the safe use of treated sludge. 2. Target Industries General contractors, industrial waste treatment businesses, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal, among other concerns. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment rental is adjustable. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where an electronic component manufacturing company achieved cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic paste such as nickel and ferrite, achieving the appropriate moisture content. - Recovery of magnetic materials using a rotating powerful magnet drum. - Achieving the appropriate moisture content by adjusting the rotation speed and the pressure of the squeezing roller. 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters also increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations can be provided by the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (using MAG PICKER / wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets - Achieved target recovery rate with a permanent magnet drum-type magnetic separator - Utilized as a secondary recovery device for cyclone separators 2. Target Industries Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid with cyclone separators, etc. 4. Results After Implementation ◎ By using a permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste ◎ Expected cost reduction effects for wastewater treatment ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be arranged for loan -------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where ceramic deposition in the manufacturing of multilayer ceramic capacitors was reduced and piping clogs were improved (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, the ceramic deposition occurring in the pipes during the post-processing of laminated waste and scrap materials was reduced. - Approximately 30% of non-magnetic ceramics were recovered along with magnetic materials. - The concentration of non-magnetic materials in the liquid decreased. 2. Target Industry - Manufacturers of multilayer ceramic capacitors, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposits in the pipes causing clogs, etc. 4. Results After Implementation ◎ The repair costs for pipe cleaning and replacement, which amounted to several million yen annually, were reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (utilizing MAG PICKER / wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets - Achieved target recovery rate with a permanent magnet drum-type magnetic separator - Used as a secondary recovery device for cyclone separators 2. Target Industry Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is still necessary after recovering mixed particles in liquid with cyclone separators, etc. 4. Results After Implementation ◎ By utilizing the permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste. ◎ Expected cost reduction effects for wastewater treatment. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be arranged for loan. -------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations can be provided by the manufacturer)

【New Application】Introducing a case where an electronic component manufacturing company achieved cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic pastes such as nickel and ferrite, achieving the appropriate moisture content. - Recovery of magnetic materials using a rotating powerful magnet drum. - Achieving the appropriate moisture content by adjusting the rotation speed and the pressure of the squeezing roller. 2. Target Industry Manufacturers of electronic components and magnetic fine powders, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters also increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where "arsenic" contained in contaminated sludge was removed to below environmental standards (MAG PICKER / utilizing wet method) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, allowing for the safe utilization of treated sludge. 2. Target Industries General contractors, industrial waste treatment companies, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal, among other concerns. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be loaned upon arrangement. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case that reduced ceramic deposition and improved pipe clogging in the manufacturing of multilayer ceramic capacitors (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, we reduced the ceramic deposition in pipes that occurs during the post-processing of layered scrap and edge trim. - Approximately 30% recovery of non-magnetic ceramics along with magnetic materials - Decrease in the concentration of non-magnetic materials in the liquid 2. Target Industries - Manufacturers of multilayer ceramic capacitors, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposition in pipes causing pipe clogs, etc. 4. Results After Implementation ◎ Reduced repair costs for pipe cleaning and replacement, which had been several million yen annually. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (using MAG PICKER / wet type) 1. Overview Considered the recovery of atomized metal fine powders using magnets. - Achieved target recovery rate with a permanent magnet drum-type magnetic separator. - Utilized as a secondary recovery device for cyclone separators. 2. Target Industry Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary for effluent even after recovering mixed particles in liquid with a cyclone separator, etc. 4. Results After Implementation ◎ By using a permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was conventionally treated as waste. ◎ Expected cost reduction effect for wastewater treatment. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment rental is adjustable. -------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where an electronic component manufacturing company achieved cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic pastes such as nickel and ferrite, achieving appropriate moisture content - Recovery of magnetic materials using a rotating powerful magnet drum - Achieving appropriate moisture content by adjusting rotation speed and roller pressure 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be loaned upon arrangement --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where ceramic deposition in the manufacturing of multilayer ceramic capacitors was reduced, improving pipe blockage (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, the ceramic deposition occurring in pipes during the post-processing of waste materials such as layer cuttings and edge trims is reduced. - Approximately 30% recovery of non-magnetic ceramics along with magnetic materials - Reduction in the concentration of non-magnetic materials in the liquid 2. Target Industry - Manufacturers of multilayer ceramic capacitors, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposition in pipes causing blockages, etc. 4. Results After Implementation ◎ Repair costs for pipe cleaning and replacement, which amounted to several million yen annually, were reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations can be provided by the manufacturer)

【New Application】Introducing a case where "arsenic" contained in contaminated sludge was removed to below environmental standards (MAG PICKER / utilizing wet method) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, safely utilizing the treated sludge. 2. Target Industries General contractors, industrial waste disposal industry, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal, etc. 4. Results After Implementation ◎ Arsenic below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment rental is adjustable. --------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where an electronic component manufacturing company achieved cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic paste such as nickel and ferrite, achieving the appropriate moisture content - Recovery of magnetic materials using a rotating powerful magnet drum - Achieving appropriate moisture content by adjusting the rotation speed and pressure of the squeezing rollers 2. Target Industry Manufacturers of electronic components and magnetic fine powders, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be loaned upon arrangement --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (utilizing MAG PICKER/wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets - Achieved target recovery rate with a permanent magnet drum-type magnetic separator - Used as a secondary recovery device for cyclone separators 2. Target Industry Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid using cyclone separators, etc. 4. Results After Implementation ◎ By utilizing the permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste ◎ Expected cost reduction effects for wastewater treatment ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be arranged for loan -------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where "arsenic" contained in contaminated sludge was removed to below environmental standards (MAG PICKER / utilizing wet method) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, safely utilizing the treated sludge. 2. Target Industries General contractors, industrial waste treatment companies, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment rental is adjustable. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where ceramic deposition in the manufacturing of multilayer ceramic capacitors was reduced and pipe clogging was improved (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, the ceramic deposition in pipes that occurs during the post-processing of laminated waste and scrap materials is reduced. - Approximately 30% of non-magnetic ceramics are recovered along with magnetic materials. - The concentration of non-magnetic materials in the liquid decreases. 2. Target Industries - Manufacturers of multilayer ceramic capacitors, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposits in pipes causing clogging, etc. 4. Results After Implementation ◎ Repair costs for pipe cleaning and replacement, which amounted to several million yen annually, have been reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

The "paper filter" removes impurities such as grinding sludge and abrasives, and is a coolant treatment device that can be used regardless of magnetic or non-magnetic materials. Additionally, we offer a unit model that combines the "magnet separator" and "paper filter," which can be utilized for various applications such as grinding machines, honing machines, and wire drawing machines. 【Features】 1. Three types available for different applications (including models combined with magnets) 2. Capable of filtering particles ranging from 10μ to 95μ 3. Significantly reduces the consumption of filter paper (paper filter) ★ For more details, please check the "product catalog."

Do you have any of these concerns regarding grinding processing? ▲ Is there no separator that can maintain sludge recovery performance for a long time? ▲ Is there no maintenance-free separator? The "FINE MAG/K type" solves these issues. (Different magnetic drum) Even if the magnetic force is increased, if the drum surface gets scratched, it cannot scrape off the sludge. To maintain stable performance even after long-term use, we apply a special hardening treatment to the drum surface, preventing scratches (patent obtained). (Other features) ◆ The squeezing roller is different! - It provides stable squeezing without slipping. ◆ The cleanliness is different! - The magnetic force on the drum surface is 16% higher compared to our conventional models. - Stabilizes product quality and reduces tank cleaning frequency. ★ For more details, please refer to the "Product Catalog." ☆ Please also check the "Grinding Processing / Problem-Solving Case Studies" (Companies A, I, and N). ☆ We can provide proposals based on usage conditions and installation environments in collaboration with the manufacturer.

Optimal for sludge recovery from coolant fluid in 'super hard and super precise grinding processing'! Do you have any of these concerns? ▲ Struggling to recover sludge that is difficult to magnetize ▲ How can I recover fine powder sludge? These challenges are solved by the 'FINE MAG/UK type'. (Main Features) 〇 High magnetic force of 9000 Gauss (drum surface) 〇 Effective in recovering sludge that is difficult to magnetize (such as in super hard tool grinding processing)! 〇 Effective in recovering fine sludge (such as honing, lapping, electrical discharge machining, and super finishing)! The 'FINE MAG/UK', capable of generating a high magnetic field, is a model with high potential as a recovery device for fine magnetic metal powders. It can be used not only for chip removal generated in parts processing but also for recovering raw materials and removing impurities from fine particles, among other applications beyond grinding sludge removal. ★ For more details, please refer to the 'Product Catalog'. ☆ Please also check the 'Grinding Processing / Case Studies' (Company T). ☆ We can collaborate with the manufacturer to provide proposals based on usage conditions and installation environments.

【New Application】Introducing a case of removing "arsenic" contained in contaminated sludge to below environmental standards (MAG PICKER / utilizing wet method) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, allowing for the safe utilization of treated sludge. 2. Target Industries General contractors, industrial waste treatment industry, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be loaned upon arrangement. --------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where ceramic deposition in the manufacturing of multilayer ceramic capacitors was reduced, improving pipe clogging (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, the ceramic deposition occurring in pipes during the post-processing of waste materials and scraps was reduced. - Approximately 30% recovery of non-magnetic ceramics along with magnetic materials - Decrease in the concentration of non-magnetic materials in the liquid 2. Target Industry - Manufacturers of multilayer ceramic capacitors, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposition in pipes causing clogging, etc. 4. Results After Implementation ◎ Reduced repair costs for pipe cleaning and replacement, which had been several million yen annually. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations can be provided by the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal fine powders (using MAG PICKER/wet type) 1. Overview Considering the recovery of atomized metal fine powders using magnets. - Achieved target recovery rate with a permanent magnet drum-type magnetic separator. - Utilized as a secondary recovery device for cyclone separators. 2. Target Industry Metal fine powder manufacturing industry, related industries of metal fine powders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid with cyclone separators, etc. 4. Results After Implementation ◎ By using a permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste. ◎ Expected cost reduction effect in wastewater treatment. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be arranged for loan. -------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where an electronic component manufacturing company achieved cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic pastes such as nickel and ferrite, achieving appropriate moisture content - Recovery of magnetic materials using a rotating powerful magnet drum - Achieving appropriate moisture content by adjusting the rotation speed and roller pressure 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ As the fine powder of magnetic materials becomes smaller, the filtration time increases due to the filter, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be loaned upon arrangement --------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】A case study of a electronic components manufacturing company achieving cost reduction in the manufacturing process of magnetic paste (using MAG PICKER/wet method) 1. Overview Continuous concentration of magnetic pastes such as nickel and ferrite, achieving appropriate moisture content. - Recovery of magnetic materials using a rotating powerful magnetic drum. - Achieving appropriate moisture content by adjusting rotation speed and roller pressure. 2. Target Industries Manufacturers of electronic components and magnetic fine powders, chemical, materials, and chemical-related companies, etc. 3. Target Issues ▲ As the fine particle size of magnetic powders increases, the filtration time using filters also increases, etc. 4. Results After Implementation ◎ The time required for paste generation using conventional filters has been significantly reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. --------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where the recovery yield rate was improved in the manufacturing process of metal micropowders (using MAG PICKER/wet type) 1. Overview Considering the recovery of atomized metal micropowders using magnets - Achieved target recovery rate with a permanent magnet drum-type magnetic separator - Utilized as a secondary recovery device for cyclone separators 2. Target Industry Metal micropowder manufacturing industry, related industries of metal micropowders, etc. 3. Target Issues ▲ Wastewater treatment is necessary even after recovering mixed particles in liquid with cyclone separators, etc. 4. Results After Implementation ◎ By using a permanent magnet drum-type magnetic separator, 98% of the residuals were recovered from wastewater that was previously treated as waste ◎ Expected cost reduction effects in wastewater treatment ☆ Please download the "catalog" to check the specifications ★ Evaluation equipment can be arranged for loan -------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - mail: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where ceramic deposition in the manufacturing of multilayer ceramic capacitors was reduced, improving pipe clogging (MAG PICKER wet application) 1. Overview In the manufacturing process of multilayer ceramic capacitors, the ceramic deposition that occurs in pipes during the post-processing of laminated waste and scrap materials is reduced. - Approximately 30% of non-magnetic ceramics are recovered along with magnetic materials. - The concentration of non-magnetic materials in the liquid decreases. 2. Target Industry - Manufacturers of multilayer ceramic capacitors, chemical, material, and chemical-related companies, etc. 3. Target Issues ▲ Ceramic deposits in pipes causing clogging, etc. 4. Results After Implementation ◎ Repair costs for pipe cleaning and replacement, which amounted to several million yen annually, have been reduced. ☆ Please download the "catalog" to check the specifications. ★ Evaluation units are available for loan upon arrangement. ---------------------------------------- ◇ Sales Agency - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Tech Co., Ltd. (explanations available from the manufacturer)

【New Application】Introducing a case where "arsenic" contained in contaminated sludge was removed to below environmental standards (MAG PICKER / utilizing wet methods) 1. Overview A new technology using a permanent magnet drum-type magnetic separator for the removal of "arsenic" from contaminated sludge generated by construction and other activities. - Recovery of iron powder adsorbed with arsenic using a permanent magnet drum-type magnetic separator. - Removal of arsenic to below environmental standards, allowing for the safe use of treated sludge. 2. Target Industries General contractors, industrial waste treatment companies, and other companies related to soil purification. 3. Target Issues ▲ Contaminated sludge and soil require appropriate disposal, among other concerns. 4. Results After Implementation ◎ Arsenic levels below environmental standards; iron powder recovery (over 98%). ◎ Safe utilization of treated sludge. ☆ Please download the "catalog" to check the specifications. ★ Evaluation equipment can be loaned upon arrangement. --------------------------------------- ◇ Sales Agent - Sanotec Co., Ltd. - Email: dx-gogo@sanotec.co.jp ◆ Manufacturer - Sumitomo Heavy Industries Fine Technology Co., Ltd. (explanations available from the manufacturer)