モレスコテクノ List of Products and Services

This is an introduction to a case study measuring the amount of oil and contaminants adhering to parts. The metal parts to be measured were immersed in hexane and subjected to ultrasonic cleaning to extract the oil and contaminants. After that, the metal parts were removed, and the hexane containing the extracted oil and contaminants was filtered using a filter. [Analysis Overview] ■ Purpose: To measure the amount of oil and contaminants adhering to parts ■ Subjects: Parts, components, workpieces, etc. ■ Analysis Items: Oil, contaminants *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

This is an introduction to a case where a test solution was applied to a steel plate, and the occurrence of rust was observed. It was conducted to confirm the corrosiveness to tools, castings, and machines. The steel plate was polished, the test solution was applied, and then it was left to stand. Subsequently, the occurrence of rust was checked. [Analysis Overview] ■ Purpose: To evaluate the rust prevention properties of water-soluble cutting oils in a simple manner ■ Subject: Water-soluble cutting oil ■ Analysis Items: Exposure test ■ Test Overview: A test solution was applied to a steel plate, and the occurrence of rust was observed *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

We analyzed the ratio (dilution rate) of diesel components mixed in used engine oil. The test results are presented in easy-to-understand graphs, including the creation of a calibration curve and the measurement of samples, along with the planned report value quantification limit. Please make use of this information. 【Analysis Overview】 ■ Purpose: To analyze the ratio (dilution rate) of diesel components mixed in used engine oil ■ Subject: Engine oil ■ Analysis Item: Diesel dilution rate test for engine oil (Test standard: JPI-5S-23-2011) *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

This is an introduction to a case where a test piece was immersed in a sample solution, and the degree of discoloration of the metal (corrosion level) was observed. This was conducted to evaluate the corrosiveness of water-soluble cutting oils on metals. The test piece was polished and partially immersed in the test solution, covered, and left to stand. Afterward, the degree of discoloration was observed, and the corrosion level was determined. [Analysis Overview] ■ Subject: Water-soluble cutting oil ■ Analysis Item: Non-ferrous metal compatibility test ■ Test Overview: The test piece was immersed in the sample solution, and the degree of discoloration of the metal was observed. *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

This is an introduction to a case where contaminating bacteria were detected in water-soluble cutting oil. The purpose was to conduct a simple microbial test and evaluate the corrosiveness (anti-corrosiveness) of the water-soluble cutting oil. The test solution was applied to a bio checker and cultured. After culturing, the corrosion level was determined by comparing it with a control table. 【Analysis Overview】 ■ Subject: Water-soluble cutting oil ■ Analysis Items <Simple Microbial Measurement> - Bio Checker TTC - Bio Checker M - Bio Checker S ■ Test Overview: Detection of contaminating bacteria in water-soluble cutting oil *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

This is an introduction to a case study evaluating the defoaming performance of water-soluble cutting oil. A test solution was taken in a graduated cylinder and agitated under certain conditions, measuring the amount of foam (ml) that changed over time. An explanation is provided along with photos. Please make use of it. 【Analysis Overview】 ■Subject: Water-soluble cutting oil ■Analysis Item: Defoaming test (agitation method) ■Test Overview: Agitating a diluted solution of water-soluble cutting oil to confirm defoaming performance *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

This is an introduction to a case where the components of cooling water (coolant water) were analyzed and confirmed to be within the specified value range. The test results are clearly explained in terms of pH, total hardness, electrical conductivity, evaporation residue, and other five items. Moresco Tech Co., Ltd. conducts analysis, evaluation, and diagnosis of lubricants and petroleum products. If you have any concerns, please feel free to consult us. 【Analysis Overview】 ■ Purpose: To analyze the components of cooling water and confirm that they are within the specified value range ■ Subject: Cooling water, coolant water ■ Analysis Items: pH, total hardness, electrical conductivity, evaporation residue *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

This is a case study introducing the analysis of the properties and contamination levels of flame-retardant hydraulic fluids before and after purification. The kinematic viscosity changed from 50.89 to 50.85 before and after filtration. Additionally, the appearance and contamination levels are summarized clearly with photographs. Please make use of it. 【Analysis Overview】 ■Objective: To analyze the properties and contamination levels of flame-retardant hydraulic fluids before and after purification ■Subject: Flame-retardant hydraulic fluids ■Analysis Items: General items, contamination levels (mass method, counting method) *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

We will introduce a case where the components of lubricating oil were analyzed to confirm the degree of deterioration. Seven analysis items are listed: kinematic viscosity, moisture, base number, fuel dilution, elemental analysis, insoluble matter, and flash point. Moresco Tech Co., Ltd. conducts analysis, evaluation, and diagnosis of lubricating oils and petroleum products. Please feel free to consult us if you have any concerns. [Analysis Overview] ■ Purpose: To analyze the components of lubricating oil and confirm the degree of deterioration ■ Subject: Lubricating oil extracted from oil pans, etc. ■ Analysis Items: Kinematic viscosity, moisture, base number, fuel dilution, elemental analysis, insoluble matter, flash point *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

Here is a case study on investigating whether kerosene is mixed with diesel fuel. In the measurement chart, the horizontal axis represents time. During the measurement, the temperature of the column is gradually increased, and the sample is separated in the column, with waveforms detected in order of lower boiling points. In the investigated diesel fuel, a peak believed to be from kerosene was detected, indicating that kerosene is mixed in. [Analysis Overview] ■ Purpose: To investigate whether kerosene is mixed with diesel fuel ■ Subjects: Diesel fuel, kerosene ■ Analysis Item: Gas chromatography analysis *For more details, please refer to the PDF document or feel free to contact us.

• Analysis and prediction system

Our company conducts analysis, evaluation, and diagnosis of lubricants and petroleum products. By regularly performing property analysis, we can determine the degradation of lubricants and prevent equipment troubles. Please feel free to consult us if you have any requests. 【Equipment Analysis Items】 ■ Infrared Absorption Analysis (IR Analysis) ■ Gas Chromatography Analysis (GC) ■ Gas Chromatography Mass Spectrometry (GC-MS) ■ ICP Emission Spectroscopy ■ Microscope, etc. *For more details, please download the PDF (company brochure) or feel free to contact us.

• Other analytical equipment