日進 List of Products and Services

The "Falcon Gold End Mill" is an end mill designed for stainless alloy steel that allows for heavy cutting at high feed rates under cutting conditions that were previously unimaginable. It has received high praise for significantly improving burr formation, even with materials like SS400 that are prone to burrs, and it performs well across a wide range of materials from carbon steel and mild steel to stainless alloys and titanium alloys! It is very resistant to vibration and allows for high feed rates. The helix angle is 40°-42°. If you are looking for an end mill for machining difficult materials, please feel free to contact us. 【Features】 ■ Carbide non-uniform lead, non-uniform pitch, 4-flute ■ TiALN coating ■ Helix angle 40°-42° ■ Very resistant to vibration and allows for high feed rates *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

Nisshin frequently receives requests for regrinding and recoating. Among them, the most popular is the SPWC coating used on our best-selling product, the Falcon end mill! We will regrind the end mills you provide and return them with this coating applied. Our regrinding method uses a unique technique that results in a smoother finish than commercially available products. Features of SPWC coating: - Excellent heat resistance - Excellent anti-welding properties - Good sliding properties - High film hardness *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

~Revolution in Difficult-to-Cut Material Processing~ For over 60 years, our company has made it our top priority to develop tools that improve processing conditions for difficult-to-cut materials. We are proud to introduce our masterpiece, the 'NISSIN FALCON ENDMILL,' and we hope you will get to know it! ◆ We offer a wide range of tools specifically designed for high-speed processing of heat-resistant alloys, titanium, and stainless steel alloys. ◆ In particular, we have numerous records of efficiency improvements for stainless steel materials, achieving approximately 2 to 5 times the performance of conventional tools. ◆ Our tools are specifically designed for difficult-to-cut material processing, primarily for the aerospace and semiconductor industries. ◆ The design concept balances rigidity and cutting performance. ◆ We are committed to using carbide substrates that are resistant to breakage and deformation. ◆ We have adopted cutting-edge coatings that are not yet available in Japan. ◆ Our tools are characterized by significantly higher cutting conditions compared to conventional tools in difficult-to-cut material processing. With the goal of explosively improving manufacturing efficiency in Japan's difficult-to-cut material processing industry, we will continue to advance product development.

• Work tools

The "Falcon Wave End Mill" is an end mill specialized for difficult-to-cut materials, particularly effective on stainless steel and titanium alloys. While its rigidity is slightly lower compared to the White End Mill, which means it cannot increase the cutting depth ae like the White End Mill, it allows for long-lasting cutting under harsh feed conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance; it is very effective when used with low cutting depth and high feed rates on heat-resistant alloys and materials that generate heat during processing, such as stainless steel alloys and Ti-6Al-4V. - Outstanding sharpness. - Special blade design reduces cutting resistance to the extreme. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon Ball End Mill" is an end mill specialized for high-speed machining of stainless alloys, titanium alloys, and heat-resistant alloys. It enables high-performance cutting under harsh conditions. This product has been very well received by a wide range of customers. 【Features】 - High heat resistance and excellent slip characteristics of the coating; very effective for heat-resistant alloys and machining that generates heat, such as stainless alloys and Ti-6Al-4V. - Exceptional sharpness. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon Short End Mill" is an end mill specialized for machining difficult materials such as stainless alloys, titanium alloys, and heat-resistant alloys using CNC automatic lathes. It enables high-performance cutting under harsh conditions. This product has been very well received by a wide range of customers. 【Features】 - High heat resistance and excellent sliding coating; very effective for heat-resistant alloys and machining that generates heat, such as stainless alloys and Ti-6Al-4V. - Exceptional sharpness, making it very effective for materials like SS400 that tend to produce burrs. - Special anti-vibration processing significantly reduces chatter. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon White End Mill" is an end mill designed to enhance cutting conditions while minimizing the risk of deflection, specifically for Invar material, which is a nickel alloy and low thermal expansion steel. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance, and very effective for heat-resistant alloys and processes that generate heat, such as Invar and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials suitable for stainless steel and heat-resistant steel. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance; very effective for heat-resistant alloys and machining that generates heat, such as Hastelloy and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials, particularly suitable for stainless steel and heat-resistant alloys. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance, exceptional coating performance; very effective for heat-resistant alloys such as Hastelloy and Ti-6Al-4V, as well as for machining that generates heat. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials, particularly suitable for stainless steel and heat-resistant steel. It enables high-performance cutting under harsh conditions. If, due to customer circumstances, dry cutting is absolutely necessary, this end mill demonstrates outstanding performance. Of course, the best results are achieved with water-soluble cutting oil. This product has been greatly appreciated by a wide range of customers. 【Features】 - Exceptional coating performance; very effective for heat-resistant alloys and machining that generates heat, such as Hastelloy and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "NISSIN FALCON Double-Head Chamfer Cutter" is highly recommended for anyone involved in chamfering processes, from stainless steel and heat-resistant alloys to aluminum and cast processing. It is the number one repeat ranking double-head chamfer cutter of Nissin for 2024!! Many companies have not reviewed their cutting conditions for chamfering, but how about being able to chamfer at double speed?? Additionally, with two corners on the blade, you get double the value with one purchase. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance and excellent sliding coating performance. Especially effective for materials that tend to produce secondary burrs. - Please try it out!! You will understand its outstanding sharpness just by touching it!! - A special grinding method reduces cutting resistance to the absolute minimum. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon Wave End Mill" is an end mill specialized for difficult-to-cut materials with low thermal conductivity, such as stainless steel, titanium alloys, and heat-resistant steel, which tend to generate high cutting heat at the cutting edge. It also demonstrates outstanding performance on soft steels like SS400, which are prone to welding. High-performance cutting is possible under high-speed feed conditions. This product has greatly improved processing efficiency for a wide range of customers, from mass production of carbon steel to difficult-to-cut materials, and has been very well received. 【Features】 - High heat resistance and excellent sliding coating performance; very effective for heat-resistant alloys like Ti-6Al-4V and Hastelloy X, as well as for machining that generates heat. - Exceptional sharpness. - Special anti-vibration processing reduces cutting resistance to the limit. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon White End Mill" is a specialized end mill designed for difficult-to-cut materials that require both high rigidity and sharpness, such as stainless steel and heat-resistant steel, which have high cutting resistance. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance with exceptional coating performance; very effective for heat-resistant alloys and machining that generates heat, such as Hastelloy and Ti-6Al-4V. - Outstanding sharpness. - Special anti-vibration processing significantly reduces cutting resistance. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

The "Falcon White End Mill" is an end mill specialized for difficult-to-cut materials such as hard stainless steel (equivalent to 630, 440C, etc.) and heat-resistant alloys. It enables high-performance cutting under harsh conditions. This product has been greatly appreciated by a wide range of customers. 【Features】 - High heat resistance and excellent lubricity coating; very effective for heat-resistant alloys and machining that generates heat, such as SUS630, Hastelloy X, and In718. - The most rigid tool in Nisshin's standard end mill catalog. - Special anti-vibration processing significantly reduces chatter. *For more details, please refer to the catalog or feel free to contact us.

• Work tools

Our company offers a wide range of cutting tools for CNC precision automatic lathes and general-purpose lathes, including "through-cutting chips" and "finishing chips." In addition to the "Premium Bites" with special coating treatment, we have the "TMR type" finishing chips suitable for machining die steel and difficult-to-cut stainless steel, as well as "diamond-coated tools" suitable for cutting carbon fiber composites and ceramics. 【Product Lineup (Partial Excerpt)】 ■ Through-cutting chips 'NK Series' ■ High-rigidity throwaway chips 'SL Series' ■ Carbide solid end mills 'Eco End Mill' ■ Small diameter medium-grit processing 'NS Series' *We have many other products available. Please refer to the materials for more details.

• Work tools
• others

The "support base (blade) for the centerless grinding machine" is a product with a separation structure between the carbide and steel body. It significantly improves upon conventional products in terms of wear resistance, durability, and cost-effectiveness. Additionally, it is equipped with outstanding features that surpass those of conventional products. Our company also handles wear-resistant tools made of carbide, so please feel free to consult us if you have any requests. 【Features】 ■ The base material can be used semi-permanently due to hardening. ■ The length of a single carbide piece can be manufactured up to approximately 1 meter. ■ Carbide chip widths can be produced at 5 mm or more. ■ In the event of carbide breakage, only the cartridge of that part needs to be replaced, making it very economical. ■ There is no warping due to aging. *For more details, please download the PDF or feel free to contact us.

• Work tools
• others

- Through-cutting chip ■ It has strong rigidity due to its separable clamp. ■ It is a chip with a sharp cutting edge and a nose radius of "0". ■ It can be re-sharpened and is therefore a very economical chip. - Chip with rake ■ It is a breaker-equipped chip that is very popular for pipe materials and difficult-to-cut materials. ■ It is a chip with an excellent sharp cutting edge. ■ It has a very long lifespan for machining difficult-to-cut materials.

• Work tools
• Woodworking machines, instruments, and tools
• others

- External groove cutting chip ■ Capable of deep penetration and lateral feeding. ■ Highly praised for difficult-to-cut materials such as bearing steel.

• Work tools
• Woodworking machines, instruments, and tools

- Rear cutting (back cutting) chip ■ Rigid and capable of powerful feed processing ■ Effective for machining difficult materials such as bearing steel ■ 7mm cutting edge allows for deep cutting ■ Available with and without breakers - Front cutting chip ■ Rigid and capable of powerful feed processing ■ Effective for machining difficult materials such as bearing steel ■ Available with and without breakers

• Work tools
• Woodworking machines, instruments, and tools

■ Chips that are less likely to produce cut-off dowels due to pin angles ■ Chips that can be re-sharpened, resulting in very low running costs 　→ The protrusion amount can be adjusted with a fitting ■ Suitable for cutting thick materials up to φ32 ■ Made from ultra-fine carbide substrate coated with TiAlN ■ Sharp chips with excellent cutting performance

• Work tools
• Woodworking machines, instruments, and tools

■SPC coated throwaway chips significantly extend tool life. ■Achieves a reduction in cutting time (depending on cutting conditions, down by 30-50%). ■Even when used under the same conditions as before, the high durability contributes to reduced tool costs. ■TMR chips offer sharp cutting performance, allowing for single-pass machining. ■The holder has high rigidity, minimizing vibrations.

• Work tools
• Woodworking machines, instruments, and tools

This catalog features "cutting tools" for CNC precision automatic lathes and large and small general-purpose lathes manufactured and sold by our company. It includes products such as "cut-off chips" and "finishing chips," which are types of "throwaway chips," as well as "premium inserts" with special coating treatments, and "carbide solid tools" like end mills and vanishing reamers. The catalog also contains a cost model table for using regrindable throwaway chips, case studies of rigidity tests using "cut-off chips," and a guide table for various tool materials. [Featured Products (Partial List)] ■ Regrindable throwaway chips ■ Cut-off chips "NK Series / CT Series" ■ Grooving chips "MDE" ■ Finishing chips "UNR/AR/ABR/AKR" ■ Precision finishing front cutting chips "TMR98" *You can view it via "PDF Download." Please feel free to contact us with any inquiries.

• Work tools

The DCGT11T30 -TW series can be used in both directions and has excellent cutting performance, with outstanding results in pre-turning small diameter titanium round bars. Additionally, regarding cutting performance, the CCGT/DCGT-RK series, which is designed for one-sided use, offers the best cutting performance in our company.

• Work tools

The "TG6, TG9 series" are throwaway chips for external diameter threading that conform to ISO standards. They are particularly effective for stainless steel machining and difficult-to-cut materials. We offer both types with and without chamfering edges. 【Chip Material Types】 ■ NC-35B: Lifespan comparable to general market products ■ SPC-30X: Can cut even HRC60° materials with ease *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "TN6 and TN9 series" are ISO-compliant throwaway chips for internal diameter threading. They are particularly effective for stainless steel machining and difficult-to-cut materials, and due to the polished finishing of the cutting edges, they provide excellent sharpness and a clean surface finish. Additionally, we also manufacture Whitworth screws, Unified screws, and more, so please feel free to contact us. 【Lineup】 ■ Carbide Solid Tool "NC35" - Without chamfering edge - With chamfering edge (standard, unified) ■ Throwaway Chip "NC35B" - With chamfering edge ■ Holder ■ Ultra-small diameter threading bar (custom-made) *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "SL Series" is a high-rigidity insert produced by Nisshin Co., Ltd., which manufactures carbide inserts and precision throwaway inserts. The finishing inserts come in two shapes: the single-hole insert "SUAR" and the two-hole insert "WUKR," which allows for one-pass machining even for processes with long cutting edges and significant material removal. Additionally, we offer a lineup of parting inserts, threading inserts, and holders. 【Features】 ■ Parting Inserts Fixed to the holder with serration Can cut materials with HRC60° ■ Finishing Inserts Capable of one-pass machining for processes with long cutting edges and significant material removal (WUKR) ■ Threading Inserts Can be used for threading operations after finishing *For more details, please refer to the PDF document or feel free to contact us.

• Woodworking machines, instruments, and tools

The "Eco End Mill" is an end mill that boasts high hardness with NC25B (TiAIN coating). It is compatible with a wide range of materials such as steel and stainless steel, and we offer both 2-flute and 4-flute options at an affordable price. Custom sizes and shapes can also be made upon request. In addition, we have a lineup of high-performance end mills called the "Short End Mill" series, which provide stable quality. 【Features (Eco End Mill)】 ■ Easy-to-use low-cost type ■ High hardness with NC25B (TiAIN coating) ■ Recommended for NC automatic lathes and complex machining ■ Available in both 2-flute and 4-flute options at an affordable price ■ Usable for a wide range of materials from non-ferrous metals to cast iron *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Small Diameter Internal Grooving" is a series of small diameter solid boring tools that respond to the diversification of internal diameter machining. The "NS10 type" of internal grooving boring tool is suitable for precision machining with a nose radius of "0" down to a minimum hole diameter of φ3.6. For the brazed type, we offer SLT20 (cermet) and SLT45 (K grade), which are typically prone to chipping. The base material flexibly contacts the chip to the workpiece, preventing chipping. Additionally, we have a lineup that includes grooving tools "NS60," end face grooving tools "NS62," and contour machining tools "NS30." 【Features (NS10 type)】 ■ Nose radius "0" down to a minimum hole diameter of φ3.6 ■ For the brazed type, we offer SLT20 and SLT45, which are typically prone to chipping ■ SLT60 (fine particle type) is also available to accommodate different workpiece materials ■ Sharp cutting performance with NC35B/SLT60 and high hardness SLT20/SLT45 allows for use in various machining applications ■ Custom manufacturing is possible if the nose radius or other specifications do not match your requirements *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We will introduce examples of manufacturing various shapes of bits, cutting tools, and wear-resistant products using our silver brazing technology. Starting with the production of "crushing blades" used in machines such as PET bottle crushers, glass crushers, and food recycling crushers, we leverage over 50 years of accumulated experience to respond to various manufacturing needs, including "hard special brazed bits and high-speed steel custom bits" and "cutting blades." We sincerely respond to detailed requests and will continue to contribute to the creation of better products. 【Manufacturing Examples (Excerpt)】 ■ Carbide special brazed bits and high-speed steel custom bits Internal and external diameter grooving bits, center-reducing bits, reverse sticks ■ Crushing blades Hammer blades, propeller blades ■ Cutting blades Rotating crushing blades, crushing blades, scrap chopper blades ■ Small cutting blades ■ Canner blades *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "LM20" series is highly praised for its excellent performance on difficult-to-cut materials, particularly stainless steel. We offer a rich lineup including the hole threading tool "NS5 type," internal threading tools "15 type and 16 type," as well as the Elicon follower and single-edged tool "95 type R." 【Lineup (excerpt)】 ■ NS5 type: Hole threading tool ■ 15 type & 16 type: Internal threading ■ 95 type R: Elicon follower and single-edged tool ■ Other sizes: 31・32 type, 33・34 type, 35 type, 36 type, 37・38 type, 39・40 type, 41・42 type *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

"Premium Bites" are CNC precision automatic lathe bites with a special coating treatment applied to the top surface of the chip. The cutting edges are less prone to build-up, making it easier to maintain stable machining dimensions. Additionally, compared to conventional brazed bites, tool life is extended by 2 to 5 times, and the cutting speed can be increased by 30% to 40%. Furthermore, due to their excellent tool life, we offer a variety of chip materials for the highly popular PB bites used in precision automatic lathes. [Features] - Special coating treatment on the top surface of the chip - Cutting edges are less prone to build-up, making machining dimensions more stable - Compared to conventional brazed bites, tool life is extended by 2 to 5 times, and cutting speed can be increased by 30% to 40% *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "PM-KN70" is a new ultra-hard material type of canner blade that is resistant to chipping at the edge. It uses a rigid iron material for the base, making it less prone to warping and distortion. Additionally, it is said that the yield and blade longevity of the product have significantly improved. We offer a lineup of K-type in an oval shape and N-type in a punch shape. 【Features】 ■ Small chipping at the edge and fewer instances of chipping ■ Excellent cutting performance, which reduces heat buildup ■ The base material is of high quality and rigid, preventing warping *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

In the field of ultra-hard tools for small part turning, do you have any concerns such as "the tool life is unsatisfactory for difficult-to-cut materials (stainless steel, heat-resistant alloy steel, hardened materials, etc.), the finished surface is not satisfactory, or there are no economical chips available"? At Nisshin Corporation, we address these concerns with our new material type "SPC-30X" (which has received great acclaim for having more than double the tool life). Customers who have used it are very pleased. Please try it and see for yourself if it's true. 【Cutting Example】 ■SUS420J2 Through Cutting - Cutting Conditions: φ6.2 material, 6,400 RPM (125m), f=0.04mm/rev - Nisshin Model Number: "NTR6010-5°" (2-corner chip) - User's Comment: Extremely helpful with a tool life of over 10,000 pieces per corner. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

Nisshin Co., Ltd., which mainly manufactures and sells ultra-hard carbide bits made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway bits, handles "Ultra-Hard Polished Round Bars." The round bar polished finishing tips are suitable for inner diameter finishing and flat cutting. Please feel free to use them according to your needs. 【Features】 ■ Size: φ0.5 to φ20 ■ Half-moon blanks are also available *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

Nisshin Co., Ltd., which specializes in the manufacturing and sales of carbide cutting tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway tools, handles the 'Lego Chuck' manufactured by Swiss company LegoFix. Our products are powerful and high-precision. Please feel free to contact us for any technical inquiries. 【Other Products Available】 ■ Carbide End Mills ■ Collet Chucks ■ Carbide Micro Drills ■ Pin Gauges ■ Rolling Dies ■ Screw Gauges, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

Nisshin Co., Ltd., which mainly manufactures and sells carbide inserts made from ultra-fine particles with excellent wear resistance and toughness, as well as precision disposable inserts, offers "Cutter Colors." This product is for spacers of combined cutters. It comes in hole sizes of 25.4 and 15.875, with thicknesses ranging from 0.8 to 2.0 in increments of 0.1. For technical inquiries, please feel free to contact us. 【Other Products Available】 ■ Carbide End Mills ■ Collet Chucks ■ Carbide Micro Drills ■ Pin Gauges ■ Rolling Dies ■ Screw Gauges, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

Nisshin Co., Ltd., which primarily manufactures and sells carbide inserts made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway inserts, offers "Carbide End Mills." We have φ20, φ25, φ30×6, φ45×12.7, and φ70×25.4 available, with thicknesses ranging from 0.2 to 3.0 in increments of 0.1. For technical inquiries, please feel free to contact us. 【Other Products Available】 ■ Carbide Ground Round Bars ■ Knurled Holders ■ Knurled Inserts ■ Lego Chucks ■ Color for Cutters, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

Nisshin Co., Ltd., which mainly manufactures and sells carbide cutting tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway bits, handles "collet chucks." Our products are designed for tabletop lathes and CNC automatic lathes. Please feel free to contact us for any technical inquiries. 【Other products available】 ■ Carbide polished round bars ■ Knurled holders ■ Knurled inserts ■ Lego chucks ■ Tool collars, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

Nisshin Co., Ltd., which mainly manufactures and sells ultra-hard carbide tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway tools, offers "Ultra-Hard Micro Drills." We have sizes ranging from φ0.1 to φ3.0 in increments of 0.01. The shank is φ3. Please feel free to contact us for any technical inquiries. 【Other Products Available】 ■ Ultra-Hard Polished Round Bars ■ Knurled Holders ■ Knurled Inserts ■ Lego Chucks ■ Color for Cutters, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

Nisshin Co., Ltd., which manufactures and sells ultra-hard carbide tools primarily made from ultra-fine particles with excellent wear resistance and toughness, also produces precision throwaway bits and handles "pin gauges." We offer sizes from φ0.5 to φ15.05 in increments of 0.01. Please feel free to contact us for technical inquiries. 【Other Products Available】 ■ Carbide polished round bars ■ Knurled holders ■ Knurled inserts ■ Lego chucks ■ Color for cutters, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

Nisshin Co., Ltd., which mainly manufactures and sells ultra-hard cutting tools made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway tools, offers the "Rolling Dice." This product is a rolling die for automatic lathes and small diameters. It boasts high precision and excellent durability. Feel free to contact us for any technical inquiries. 【Features】 ■ Rolling die for automatic lathes and small diameters ■ High precision and excellent durability ■ M1 to M3 standard pitch, M3.5 to M5 extra fine pitch *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

Nisshin Co., Ltd., which mainly manufactures and sells carbide inserts made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway inserts, handles "thread gauges." We offer plug gauges and ring gauges, suitable for use with coarse, fine, and pipe threads. For technical inquiries, please feel free to contact us. 【Other products available】 ■ Carbide polished round bars ■ Knurled holders ■ Knurled inserts ■ Lego chucks ■ Tool collars, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others

This product is a grooving chip that has been polished to a mirror finish for sharp cutting performance. Compared to commonly used grooving chips, it has a longer blade length, allowing for side cutting after initial engagement, making it suitable for processing slightly wider grooves. Additionally, the height of the core remains unchanged, ensuring safe usage. The groove width is available from 0.52 to 3.0 mm. 【Features】 ■ Long blade length ■ Strong in lateral feeding ■ Regrindable ■ Adjustable chip projection *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

This product is a pre-ground chip for disposable small tools. There are two types: the "MR" with a mirror finish and the "MAR" with a chip breaker. It can be reused simply by regrinding it to compensate for the wear on the cutting edge. Since the core height remains unchanged, it can be used with confidence. The cutting length is 6.5mm per corner, making it very user-friendly. 【Features】 ■ The cutting edge can be regrinded while in use. ■ The chip protrusion can be adjusted according to the cutting load. *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the wear-resistant tool products manufactured by Nisshin Co., Ltd., which specializes in the production and sale of carbide inserts made from ultra-fine particles with excellent wear resistance and toughness, as well as precision throwaway inserts. Our product is the "carbide pin" made from hard alloy. In addition, we also manufacture various cutting tools and wear-resistant products made from hard alloy, such as mechanical sliding components and wire cutting blades. We respond to various requests regarding lifespan and pricing. Please feel free to contact us. 【Other Products】 ■ Wear-resistant components ■ Wire cutting blades ■ Rotary blades for grinders and crushers *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• others