LEDテクノ List of Products and Services

The power will be turned ON/OFF. 【Features】 ■ Input voltage 12V ■ Maximum input current 4A *For more details, please download the PDF or contact us.

• others

"Blink-kun" is an operating unit that allows you to adjust the LED blinking interval in five levels. 【Features】 ■ Two types of operation: strobe blinking and fade blinking ■ Input voltage is 12V ■ Maximum input current is 4A *For more details, please download the PDF or contact us.

• others

"Mei An-kun" is an operation unit that allows you to adjust the brightness of the LED in five levels. You can adjust the brightness according to the usage environment. 【Measured Brightness Data】Measured by our company ■TEco Light 60 Brightness Levels: 5: 810, 4: 630, 3: 470, 2: 310, 1: 80, OFF: 0 ■TEco Light 30 Brightness Levels: 5: 570, 4: 460, 3: 350, 2: 230, 1: 60, OFF: 0 *For more details, please download the PDF or contact us.

• others

This is a magnet for securing excess cables to shelves when installing under-shelf lighting on steel fixtures. 【Features】 ■ The installation position of the magnet can be adjusted ■ Uses a powerful neodymium magnet *For more details, please download the PDF or contact us.

• others

"Teco Sound" is a voice POP equipped with a PIR motion sensor. The PIR (Passive Infra-Red) motion sensor detects changes in infrared radiation from surrounding objects (such as a person passing by) through dozens of sensing axes and responds accordingly. There are two types available: a fixed type that writes audio data to a circuit board for reliable playback, and a replaceable type that uses a microSD card for convenient audio previews and data swapping. 【Features】 ■ The exterior is made of paper, allowing for designs such as offset printing on the front. ■ The volume can be adjusted in three levels. *For more details, please download the PDF or contact us.

• others

The "Techno Light Panel," designed for light guide plates, uses LED and acrylic sheets, and is widely used in public signage and retail storefronts due to its convenience and cost-saving effects. Our company not only provides light guide plates as backlights but also utilizes advanced acrylic processing technology to incorporate functionality and design into the light guide plates themselves. We also showcase a wide range of production examples, including signs, displays, POPs, panels, as well as exhibition stands and shelves. 【Features】 ■ Thin panels (light guide plates) that glow using LED and acrylic sheets ■ Incorporates functionality and design ■ Controls light using laser engraving and special printing techniques ■ Produces display designs that shine beautifully like objects ■ Materials: Light guide plate - acrylic sheet, aluminum channel *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Mini Square Electric Sign" is a mini-sized, box-type POP that is size-free due to extrusion molding. It is recommended for small spaces as a glowing mini POP. By layering diffusion film or resin boards in multiple insertion grooves, it allows for a graphic expression of light with depth. We also introduce examples of usage where the main body is stacked or where a half-mirror board is used to express a sense of depth. 【Features】 ■ Recommended for small spaces ■ Mini-sized, box-type POP that is size-free due to extrusion molding ■ Capable of graphic expression of light with depth ■ Numerous production examples available *For more details, please refer to the PDF materials or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "LED POP Star" is a glowing shelf talker designed for standard display shelves. The three-dimensional face of the glowing POP sign brightly showcases products and sales areas. It is compatible with standard fixtures that have and do not have spill guards. It uses LED modules "Teco Light 60" and "Teco Light 30" that can be inserted. Additionally, we offer an option called "POP Star Slider," which can be installed on the back to light up the face of the displayed products. 【Features】 ■ Glowing shelf talker ■ Three-dimensional face of the glowing POP sign ■ Brightly showcases products and sales areas ■ Uses LED modules "Teco Light 60" and "Teco Light 30" ■ Space for price cards, JAN codes, electronic price lists, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Teco Slim Line" is a W900 under-shelf lighting specifically designed for "Teco Light 30" and "Teco Light 60." The main body can be rotated to change the angle of illumination to match the displayed products. It is compatible with the diameter of fluorescent tubes (T6 Slim), allowing the use of lamp holders (pre-made for T6 Slim tubes) for installation. 【Features】 ■ High-brightness slim lighting ■ Exclusively for Teco Light 30 and Teco Light 60 ■ Adjustable illumination angle ■ Compatible with the diameter of fluorescent tubes (T6 Slim) *For more details, please refer to the PDF materials or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

"Shina Terrace" is a decorative lighting that can fix the irradiation angle at 45 degrees, in addition to horizontal, ensuring that the light source does not directly enter the eyes. The soft light that pursues glare-free illumination gently and accurately lights up the products without reflecting the LED bulbs. It is also suitable for installation in corners of fixtures and on steel L angles. 【Features】 ■ Soft light that pursues glare-free illumination ■ Gently and accurately lights up products without reflecting LED bulbs ■ Can fix the irradiation angle at 45 degrees in addition to horizontal ■ Decorative lighting that does not allow the light source to directly enter the eyes ■ LED: Capable of installing LED boards up to 12mm wide inside *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Tanaterras Flat" is a shelf lighting system designed to illuminate and highlight the faces of products that are in shadow, using standard shelving fixtures, wooden fixtures, and acrylic fixtures. The main cover is available in two types: milky white and transparent. Installation can be done using magnets for steel fixtures, dedicated brackets for wooden fixtures, or double-sided tape for securing. 【Features】 ■ High brightness ■ Simple design ■ Slim and lightweight at 8mm thick ■ Brightly highlights the faces of products in shadow ■ LED: Can accommodate LED boards up to 12mm wide inside *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

"Tape LED" is a roll-type tape-shaped LED module. It can be installed along curves and other shapes. Additionally, it can be cut in units of 50mm. 【Features】 ■ Made to order ■ High brightness ■ Roll-type tape shape ■ Can be installed along curves and other shapes ■ Can be cut in units of 50mm *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Teco Side" is an LED module that emits light in a lateral direction. It measures 500mm in length and 7mm in width, featuring 60 LED bulbs arranged in a configuration of three bulbs per LED board, with 20 blocks connected together. It can be cut in 25mm increments according to the application. It is suitable for lighting effects with "Light Polycarbonate." Additionally, we offer tape-like LEDs that can be installed along curves and other shapes. 【Features】 ■ Emits light in a lateral direction (LED beam angle of 120 degrees) ■ 20 blocks connected with LED boards arranged with three bulbs each ■ Can be cut in 25mm increments according to the application ■ Ideal for lighting effects with "Light Polycarbonate" *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Teco Display Light" has a length of 832mm and a width of 5.5mm, with a light source consisting of 60 LED modules. An LED board with 3 LEDs arranged in each block is connected in 20 blocks. It emits light more gently than the "Teco Light Guide Plate Light." 【Features】 ■ High brightness ■ For display use ■ LED board with 3 LEDs arranged in each block connected in 20 blocks ■ Emits light more gently than the "Teco Light Guide Plate Light" *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Teco Light Guide Plate Light" is an LED module for light guide plates, measuring 998.4mm in length and 5.5mm in width, featuring 72 LED light sources. An LED substrate with three LED bulbs arranged in each block is connected in 24 blocks. When used with a light guide plate, this product is installed in an aluminum one-sided channel, and a special 5mm thick acrylic plate is inserted to achieve surface illumination. 【Features】 ■ High brightness ■ For light guide plates ■ LED substrate with three LED bulbs arranged in each block connected in 24 blocks *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Teco Light 30" is an LED module suitable for under-shelf lighting, measuring 832mm in length and 12mm in width, with 30 LED light sources. The LED board, which has 3 LED bulbs arranged, is connected in 10 blocks. It can be cut at 83.2mm intervals depending on the application. There are four color temperatures available: daylight color (cool white), white color (neutral white), incandescent color (warm white), and blue. 【Features】 ■ High brightness ■ Ideal for under-shelf lighting ■ LED board with 3 LED bulbs arranged in 10 blocks ■ Can be cut at 83.2mm intervals ■ Four color temperatures available *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "Teco Light 60" is an LED module suitable for under-shelf lighting, measuring 832mm in length and 12mm in width, with a light source consisting of 60 LED bulbs. The LED board is connected in 20 blocks, each containing 3 LED bulbs. It can be cut at 41.6mm intervals depending on the application. We offer four color temperatures: daylight color (cool white), white color (neutral white), incandescent color (warm white), and blue. 【Features】 ■ High brightness ■ Ideal for under-shelf lighting ■ LED board connected in 20 blocks with 3 LED bulbs each ■ Can be cut at 41.6mm intervals ■ Available in 4 color temperatures *For more details, please refer to the PDF document or feel free to contact us.

• Fluorescent Light Type
• Bulb Type

The "LED Side Emitting Sheet" is a newly conceived light-emitting sheet that applies a unique special processing to the surface of a thin sheet of polycarbonate resin, efficiently trapping the light emitted from the LED at the edge (cut surface) and illuminating the entire sheet and its edges. Additionally, it allows for basic resin processing methods such as die-cutting, heat bending, and adhesion with acrylic materials, while the sheet's inherent elasticity enables curved finishes, creating a new texture. 【Features】 ■ Thin sheet with excellent processability ■ Abundant variations in light colors and flashing patterns ■ Glare-free light *For more details, please request materials or view the PDF data available for download.

• others

This catalog is the product catalog of LED Tech Co., Ltd., a manufacturer of electrical processing equipment centered on LED for sales promotion fixtures. To accommodate various applications such as brightness, color temperature, and size, we have enhanced our lineup starting with the "Teco Light Series." We also feature various products such as the "Tanaterrace Flat," which focuses on design and usability, and the LED high-brightness & wide shelf lighting "Shinaterrace." [Contents] ■ Light you want to keep looking at ■ Original LED circuit board Teco Light Series ■ LED high-brightness under-shelf lighting Tanaterrace Flat ■ LED high-brightness & wide shelf lighting Shinaterrace ■ LED high-brightness under-shelf lighting Teco Slim Line, etc. *For more details, please download the PDF or feel free to contact us.

• Fluorescent Light Type
• Bulb Type