ミヤガワ金属販売 List of Products and Services

The "CX095-65" is a drill screw that can be driven into 28mm ultra-thick steel plates without pre-drilling. It allows for joining and renovation work in environments where the use of open flames is prohibited. We can recommend our original stainless steel brand according to your usage environment and application, so please feel free to contact us. 【Features】 ■ Enables joining and renovation work in environments where the use of open flames is prohibited ■ Suitable for fastening steel plates (with pre-drilling) and ultra-thick steel plates (maximum flange thickness of 28mm) ■ A revolutionary drill screw made possible by our superior drill screw manufacturing technology ■ Various materials can be selected *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials
• Safety and consumables

Miyagawa Metal Sales Co., Ltd. handles faucet parts such as "washers and one-seat washers." We pay attention to the finishing on the back side and provide careful finishing. We also offer various parts such as strainers used for sinks and bath drains, as well as water supply ports for baths. We can manufacture according to your requests. Please feel free to contact us. 【Product Lineup】 ■ Outer Diameter 60 Series ■ Outer Diameter 64 Series *For more details, please refer to the PDF document or feel free to contact us.

• Faucet fittings
• Water and sewerage pipe fittings

Our "MRX" has successfully passed the salt spray test conducted by a certain unit bath manufacturer and has been adopted. It is used for the installation of internal components in unit baths. Bathrooms are particularly prone to rust, but our product has successfully met those conditions. Rust does not belong in a clean unit bath. Since this involves penetrating thin steel plates, it is designed with pointed screws. *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Safety and consumables
• Subsidiary materials

Here is a case study of our "MRX Drill Screw" used on the roof of a bicycle parking area in a condominium. The roof of the parking area can be seen from the upper floors. In this condominium, rust had developed at the screw parts of the bicycle parking roof, resulting in noticeable brown stains that detracted from its appearance. By replacing them with the rust-resistant "MRX Drill Screw," we were able to suppress the occurrence of stains and solve the issue. Additionally, the speed of installation for the components increased, allowing for more efficient work. [Case Study] ■ Before Implementation - Rust developed at the screw parts of the bicycle parking roof - Noticeable brown stains, poor appearance ■ After Implementation - Occurrence of stains was suppressed *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables
• Subsidiary materials

Introducing our diverse lineup of original products that we at Miyagawa take pride in! Careful consideration of materials, surface treatment, appearance, and usage environment are key points in selecting screws. The original products we offer are capable of meeting various environments and needs, including corrosion resistance, SCC resistance, strength, and hardness. <Original Products> ■ GRX Drill Screw ■ FRX Drill Screw *For more details, please download the PDF or feel free to contact us.

• Work tools
• Safety and consumables
• Subsidiary materials

In response to the frequent typhoon damage occurring these days, the use of stronger and harder materials (high-strength materials) than conventional piping materials has been increasing. As a result, more force is required to fasten materials with traditional drill screws, leading to longer fastening times. In this context, our original product, the 'GRX Drill Screw,' can fasten even hard materials like high-strength materials, making construction easier and reducing construction time, which has brought us positive feedback. 【Features】 ■ Drill screws for high-strength steel ■ High corrosion resistance ■ Easily penetrates materials with a maximum thickness of 12mm 【Construction Examples】 ■ Round pipes for general horticultural facilities SS400 materials such as φ25mm with a thickness of 1.2mm and φ31.8mm with a thickness of 1.6mm ■ High-tensile materials used in videos (Type 700) φ32mm with a thickness of 2.0mm and joint material electrical conduit G22 (φ26.5mm with a thickness of 2.3mm) ★ We will be exhibiting at the Architecture and Building Materials Exhibition held at Tokyo Big Sight starting March 3, 2020. *For more details, please download the PDF or feel free to contact us.

• Work tools
• Safety and consumables
• Subsidiary materials

"Bolts are prone to rust." Are you giving up with that thought? Good news for such customers. Miyagawa Metal Sales specializes in stainless steel screws. Our company presents the MRX stainless steel drill screw, an astonishingly corrosion-resistant drill screw developed uniquely by Miyagawa Co., Ltd. Along with this, we have also achieved excellent cost performance for the FRX drill screw through years of technology and experience. It's definitely worth trying at least once! ★ We are giving samples to a limited number of 10 companies ★ ★ Those who receive the samples will also get an original novelty item specially made by Miyagawa Metal Co., Ltd. ★ 【Features】 ■ Penetrates a 12mm thick steel plate in about 10 seconds ■ Martensitic type ■ Exceptional cutting performance with high-speed drill speed for comfortable and labor-saving work ■ Total cost reduction with durable MRX ■ Adaptable to harsh environments ■ Non-plated with corrosion resistance equivalent to A2 (SUS 304 series) *We have introduced [case studies] at the URL below. If you would like a sample, please contact us through the inquiry form! For more details, please download the PDF or feel free to contact us.

• Work tools
• Subsidiary materials

The "STS6.5・F Series" is a high-quality hardware approved by the Japan Housing and Wood Technology Center, ensuring safety and reliability. It allows for the construction of wood connections using laminated timber and other materials without the use of connecting hardware. It features an environmentally friendly surface treatment, ZICOLLUMTM, which is resistant to rust. It is manufactured in certified factories under strict quality control. 【Features】 ■ Certified by the Japan Housing and Wood Technology Center ■ Z-mark connecting hardware (Approval Number 129-1) ■ Allows for the construction of wood connections using laminated timber and other materials without the use of connecting hardware ■ High quality made in Japan ■ Surface treatment with ZICOLLUM ■ Manufactured in certified factories *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

Our company manufactures long screws with a maximum nominal diameter of 8mm and a maximum nominal length of 400mm using our unique dedicated machines. Thanks to our high technical capabilities that maintain high quality, we can adapt to various needs, and the shapes and materials of recesses, heads, and screw tips can also be customized. Depending on the usage environment and application, we propose Miyagawa's original stainless steel brand. Please feel free to contact us. 【Features】 ■ High technical capabilities that maintain high quality ■ Miyagawa's unique dedicated machines ■ Long screws with a maximum nominal diameter of 8mm and a maximum nominal length of 400mm ■ Shapes and materials can also be customized ■ High quality made in Japan ■ Various materials available for selection *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

The 'deck screws' prevent the occurrence of burrs due to their special screw head shape. Since pre-drilling and countersinking are unnecessary, work efficiency is improved, leading to reduced construction time and cost savings. They are suitable for fastening hard decking materials (such as Jarrah, Ipe, and Ulin) and steel joists (1.6mm thick). [Features] ■ No pre-drilling or countersinking required ■ Prevents burr formation due to special screw head shape ■ Improved work efficiency leads to reduced construction time and cost savings ■ Various materials can be selected ■ Ideal for fastening hard decking materials *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

"Code Rex" is a drill screw that combines square and cross holes to eliminate cam-out, which can cause work delays. It features a square No.2 bit hole that supports high power from drivers, ensuring smooth operation even in hard-to-reach and difficult-to-drive locations. Aftercare can be done with a regular cross screwdriver. This improves work efficiency and reduces costs by shortening construction time. 【Features】 ■ Adopts a square No.2 bit hole that supports high power from drivers (Note: SRWQ63 and FRWQ63 use square No.3) ■ Increases work efficiency, shortens construction time, and reduces costs ■ Prevents screws from falling during installation ■ Makes installation at difficult high-altitude sites easy ■ Hybrid of square and cross holes *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

The "SRX" is a drill screw made of austenitic stainless steel that is strong in harsh environments, designed to be driven into general structural steel. With this durable product, you can achieve total cost reduction. It has high corrosion resistance equivalent to that of typical A2 (SUS304) products, making it suitable for harsh environments. Additionally, it enables drilling into thin sheets of general structural steel, which is difficult with A2 (SUS304) products. 【Features】 ■ Made of austenitic stainless steel ■ Capable of drilling into thin sheets of general structural steel ■ Adaptable to harsh environments ■ High corrosion resistance equivalent to typical A2 (SUS304) products *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

The "FRX" is a drill screw uniquely developed by Miyagawa that inherits the amazing sharpness achieved by "MRX," while being offered at a relatively low cost. Through a consistent manufacturing system that includes design tailored to purpose, production of molds and tools, heat treatment, and quality control inspection, we achieve excellent cost performance. We offer a lineup that includes "FRX-S," a stainless steel product with corrosion resistance and workability that surpasses typical SUS410 products, as well as "FRX-F," made of iron/trivalent zinc. 【Features】 ■ Inherits the amazing sharpness achieved by "MRX" ■ Can be offered at a relatively low cost ■ Consistent manufacturing system including design tailored to purpose, production of molds and tools, heat treatment, and quality control inspection ■ Achieves excellent cost performance *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools
• Subsidiary materials

This document introduces the types and characteristics of surface treatments for screws and bolts handled by Miyagawa Metal Sales Co., Ltd. It provides detailed explanations of the appearance and composition of surface treatments, as well as the properties and main applications of stainless steel. Our company keeps a wide variety of drill screws in stock to meet your needs. Please feel free to consult us for urgent orders. [Contents] ■ Types and characteristics of surface treatments ■ Properties and main applications of stainless steel *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

"Barrister" is a stainless steel drill screw developed to provide holding power to aluminum thin plates, making them fastenable. With outstanding torsional strength and holding power, it achieves efficient workability and speed of screwing. Additionally, it demonstrates high corrosion resistance and durability even in harsh environments. Depending on the usage environment and application, we propose Miyagawa's original stainless steel brand. Please feel free to contact us. 【Features】 ■ Exhibits remarkable holding power due to unique technology for aluminum thin plates ■ Efficient workability reduces construction time ■ Proposals available with materials suited to conditions *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

"Stud screws" are non-weld screws handled by Miyagawa Metal Sales Co., Ltd. Compared to welding, they are less affected by weather conditions, making process management easier. They can also be used for joint repairs and construction in environments where the use of open flames is prohibited. Additionally, they help prevent health hazards to workers from electric shock and gas. Depending on the usage environment and application, we propose Miyagawa's original stainless steel brand. Please feel free to contact us. 【Features】 ■ Easier process management as they are less affected by weather compared to welding ■ Possible for joint repairs and construction in environments where open flames are prohibited ■ Prevention of health hazards to workers from electric shock and gas ■ Contributes to reducing carbon dioxide emissions on-site compared to welding ■ Various materials can be selected *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Subsidiary materials

The "MRX" is a martensitic high-strength stainless steel drill screw that has corrosion resistance equivalent to SUS304 without plating. It has a high holding power against the counterpart material and is resistant to rust, which can reduce maintenance efforts such as replacements. It is also suitable for use in harsh environments. *Currently, we are offering related materials. We are presenting photos of the results from salt spray, sulfur dioxide gas, and outdoor exposure tests comparing it with SUS304 and SUS410 conducted by our company. (You can view detailed information by clicking the download button.)

• Work tools
• Subsidiary materials

In the case of drill screws, drilling into stainless steel plates, which has been considered difficult until now, has become possible with the 'GRX drill screw' due to its excellent corrosion resistance. We believe this is a groundbreaking product that is expected to perform well in various locations by allowing for easier fastening of harder materials. 【Features】 ● Enables drilling into stainless steel plates (austenitic type) which is difficult with iron and SUS410 series drill screws. ● Adapts to harsh environments (high corrosion resistance comparable to general A2 <SUS 304> products). Material: Martensitic special stainless steel Applications: Locations where maintenance is difficult, plants that should avoid operational failures due to aging deterioration, kitchen equipment, etc. *For more details, please download the PDF or feel free to contact us.

• Work tools
• Safety and consumables
• Subsidiary materials

This catalog introduces the drill screws handled by Miyagawa Metal Sales. It features a wide range of our original products, including iron and unichrome drill screws "FRX-F," stainless drill screws "FRX-S," and special stainless drill screws "MRX." We are continuously introducing products that meet various environments and needs, including corrosion resistance, SCC resistance, strength, and hardness. Please make use of this for selecting products. [Contents] ■FRX-F ■FRX-S ■MRX ■GRX ■FRX-N *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Safety and consumables
• Subsidiary materials