ソーキ List of Products and Services

**Features** - Safe with non-contact metal - The LED rotating display allows for quick understanding of the phase sequence of the three-phase power supply - Easy confirmation with LED and buzzer sound - Uses red LED for visibility even in dimly lit areas - In the case of the correct phase, the arrow lights up green, allowing for photo documentation for reporting purposes - Can be fixed to the distribution board with four magnets on the back - Battery check function The depletion of the battery is indicated by the blinking of the ON lamp, helping to prevent sudden power outages - Auto power off Automatically turns off the power 15 minutes after being turned on.

• Electrical Equipment Testing

【Features】 ■ Lightweight, easy to use, and convenient to carry. ■ Can detect both bare wires and insulated wires at high voltages of 3kV to 7kV when extended or retracted. ■ When holding the nameplate area of the detector's sensing part, it can be used for detecting low voltage (100-600V) circuits. ■ By attaching the included grounding wire, it can detect bare charged parts in the range of AC 100V to 7kV and DC 50V to 7kV. ■ The bright red (AC) and orange (DC) high-brightness LEDs, along with an easily audible electronic buzzer, make it easy to confirm operation even in bright or noisy environments. ■ The sensing part is sealed and features a drip-proof structure to prevent failure due to dust, dirt, and moisture.

• Electrical Equipment Testing

Features: ■ A lightweight model of the HS-20N.

• Electrical Equipment Testing

**Features** - Ground resistance meter compliant with JIS standards - Wide measurement range Accurately measures ground resistance from Type A to Type D grounding work. Additionally, measurements can be taken up to 115% of the measurement range. - More stable measurements Easily check the grounding condition of auxiliary grounding rods for greater accuracy. Furthermore, the measurement frequency can be switched to prevent the effects of harmonic ground currents. - Simple measurement function Switching between normal and simple measurement modes can be done with a single touch of a switch. - Overvoltage protection and warning function During simple measurements with commercial power sources, common miswiring is safely warned by an alarm buzzer and overvoltage protection (AC 250V/1 minute). - Resistant to mud and dirt Enhanced dust resistance for measurement switches and dials, improving durability. - More convenient accessories Tangles of measurement cables can be easily organized with a cable winder.

• Electrical Equipment Testing

【Features】 ■ Quick measurement with a one-dial design ■ Stable measurement unaffected by induced noise Adoption of AC voltmeter method ■ Excellent vibration and shock resistance Use of tote band support method and ABS resin ■ Ground voltage (0-30V) can be measured

• Electrical Equipment Testing

【Features】 ■ High Angle The accuracy of the 200.0Ω range is ±1.5%rdg ±1.5%rdg ±4dgt. ■ Auto Range and Automatic Check of Auxiliary Ground Electrode Measurements can be taken simply by pressing the "MEASURE" button, without the hassle of switching ranges. It also automatically checks the ground voltage and auxiliary ground electrode. ■ High Allowable Ground Resistance for Auxiliary Ground Electrode The allowable resistance for the auxiliary ground electrode has increased to about 10 times higher compared to conventional models. ■ Comes with a Retractable Reel A convenient retractable reel is included, making preparation before measurement and cleanup after measurement easy.

• Electrical Equipment Testing

**Features** - Safe and accurate measurement without short-circuiting. - Equipped with a dedicated PV function. - High-speed response: Significantly improved response speed compared to conventional models, allowing usage similar to a pointer type. - Capable of measuring without being affected by the PV during generation. - Includes 5 ranges for standard insulation resistance measurement (50/125/250/500/1000V). - Enhanced comparator function: The time from the start of measurement to pass/fail judgment is very short, allowing it to be used like a continuity check with a tester. The backlight lights up red during a FAIL judgment (defective). - Minimal fluctuation in measurement values. - Highly accurate voltage measurement function: Equipped with a DC/AC voltmeter that has the same accuracy as a card tester. No need to switch the card tester during voltage measurement. - Lead with switch: The switch at hand allows for applying measurement voltage, turning on the light, and displaying comparator results via LED. (Our rental products come with a lead with switch specification.)

• Solar power generation equipment

**Features** - Equipped with an auto-discharge function: The charged electric charge is automatically discharged after measuring the insulation resistance, such as capacitive loads. The residual voltage value is monitored by an output voltmeter, allowing confirmation of the discharge state. - Easy-to-read automatic switching dual scale: The scale for high voltage insulation resistance is dual, and it is automatically switched by the internal circuit. It has a structure that is easy to read from low resistance values to high resistance values. - Includes a digital voltmeter capable of directly measuring set voltage, output voltage, and charge voltage. - Fixed range of 1kV/100MΩ for cable sheath insulation diagnosis. - Equipped with over-discharge prevention circuit and over-charge prevention circuit. - Voltage output alarm via buzzer.

• Electrical Equipment Testing

【Features】 ■ Digital 4 ratings ■ Multifunctional (Insulation resistance measurement / AC voltage measurement / Resistance measurement) ■ Clear display without flicker The display starts from the confirmed digit, so there is no flicker. ■ Double action mechanism ■ Comparator function If the measured value is lower than the reference value, it displays LOW and alerts with a buzzer sound. ■ Memory function You can record up to 20 arbitrary memory numbers for each rating. ■ Discharge function When "MEAS SW OFF" is activated, it automatically starts discharging, and you can monitor the discharge status with a bar graph. The complete discharge can be confirmed when the bar graph disappears. ■ Auto hold function It holds the resistance value for about 5 seconds after "MEAS SW OFF."

• Electrical Equipment Testing

【Features】 ■ Compact and lightweight pocket size that doesn't require much installation space ■ Easy-to-understand two-item display at a glance ■ Data can be transferred to a PC without stopping the recording ■ Battery replacement while recording (recording continues for about 30 seconds even after removing the battery) ■ Up to three times the recording capacity compared to conventional models (60,000 data points per channel) ■ Newly equipped with a statistical data recording mode that captures changes without missing them ■ Measurement data is not lost even if the battery runs out ■ Peace of mind in case of accidental operation (backup of the previous recording data)

• Electrical Equipment Testing

**Features** - Supports up to 4 power lines (common voltage) Can accommodate various measurement lines with 4 circuits (single-phase 2-wire), 2 circuits (three-phase 3-wire), and 1 circuit (three-phase 4-wire) with a single unit. - Abundant measurement functions Simultaneous measurement of voltage, current, power (active/reactive/apparent), cumulative power, power factor, frequency, etc. Additionally, in three-phase 3-wire (3P3W2M) mode, it can display 3 powers/3 currents with 2 voltage/2 current measurements. In three-phase 4-wire mode, it can display neutral line current with 4 current measurements. - 0.5A to 5000A range Can handle large current and large diameter wire measurements with 7 types of clamp current sensors from the CT terminal. - High-speed data storage from 1 cycle (1 waveform) In standard mode cumulative measurement, data can be saved from an interval time of 1 second, and in cumulative and harmonic simultaneous measurement, data can be saved from 1 minute. Furthermore, in short-time mode, data can be saved from the effective value of 1 cycle. - Error connection detection function using vector diagrams The connection confirmation screen with vector display allows for checking disconnections, phase detection, and reverse connection of clamp sensors, ensuring reliable connections even during VT and CT terminal measurements.

• Electrical Equipment Testing

**Features** ■ Safety Design Safety design compliant with safety standard EN61010-1:2001. ■ Support for Various Power Lines Capable of measuring single-phase 2-wire, single-phase 3-wire, three-phase 3-wire, and three-phase 4-wire lines with a single unit. Equipped with one additional input channel for measuring separate power lines, DC voltage, neutral lines, etc. ■ Detection of Constrained Impulses and Waveform Display Function Samples 4 channels of voltage at 2MS/s, enabling detection and waveform display of high-speed, high-voltage (transient overvoltage (impulse)) up to 0.5μs and 2000Vpk. ■ △V10 Flicker and IEC Flicker Measurement Allows selection between △V10 flicker, primarily used in Japan, and IEC flicker (Pst, Plt) as defined by international standards, measured alongside power quality parameters. ■ △-Y Conversion and Y-△ Conversion Functions △-Y conversion is possible when connected in three-phase 3-wire configuration, and Y-△ conversion when connected in three-phase 4-wire configuration. Voltage display can be selected as line-to-line voltage or phase voltage in either configuration. ■ Time Series Graph Display Displays fluctuations of various power quality parameters in a time series graph. Shows maximum, average, and minimum values calculated for each interval period.

• Electrical Equipment Testing

【Features】 ■ Current terminal mis-insertion prevention shutter (terminal shutter) To prevent incorrect settings of the measurement function terminal due to operational errors, a terminal shutter has been installed at the current terminal section. The terminal shutter opens and closes in conjunction with the function switch, allowing test leads to be connected to the current terminal only when set to the current measurement function. ■ Two types of memory functions - SAVE memory function: A function that allows manual saving of data at will. - Logging memory: A function that automatically records data at regular intervals. The logging interval can be set from 1 second to 30 minutes in 7 settings. ■ Peak hold function Supports waveforms longer than 1ms. Captures instantaneous peak values that cannot be detected by normal maximum value measurement functions. ■ Duty cycle (%) measurement Displays the duty cycle of pulse waveforms. By measuring the duty cycle and frequency, it is possible to calculate the high level (t2) time.

• Electrical Equipment Testing

【Features】 ■ Peak hold function Response time can be switched between approximately 10ms and 100ms. Hold characteristics = Change in indicated value over time is within approximately ±1% F.S after 1 minute of holding (at 23℃±10℃/75% RH or lower, provided there is no condensation). ■ Average value detection method ■ Data hold function with output capability

• Electrical Equipment Testing

**Features** - Medium diameter (φ40mm) type capable of measuring leakage current - Manual range switching - Auto power-off function This feature prevents battery depletion due to forgetting to turn off the power, extending battery life. It automatically enters the auto power-off state approximately 10 minutes after the switch operation. - Data hold function This function fixes the measured value on the LCD display. Pressing the "DATA HOLD" switch once activates the hold state, and the data at that moment is retained. The display does not change even if the input varies.

• Electrical Equipment Testing

【Features】 ■ Large diameter type (φ55mm) based on AC and DC current measurement ■ Model with CL250 as the effective value detection

• Electrical Equipment Testing

【Features】 ■ Large diameter type (φ55mm) based on AC and DC current measurement ■ AC/DC voltage measurement function, resistance measurement (continuity check) function ■ Equipped with output function

• Electrical Equipment Testing

The definitive version of a small surface roughness measuring instrument.

• Non-destructive testing

**Features** - Equipped with a large color graphic LCD (with touch panel) The large color graphic LCD with a touch panel offers excellent visibility for the calculation display section, combining expressive display and intuitive operation. The use of a backlight significantly improves visibility when working in dimly lit environments. - Built-in memory Up to 10 measurement conditions can be saved in the built-in memory of the calculation display section. - Password protection Various functions can be access-restricted by a password, preventing erroneous operations and managing settings. - Multi-language support The display language supports 16 languages and can be switched as needed. - The stylus alarm function notifies you when the cumulative measurement distance exceeds a pre-specified "threshold." - Supports various roughness standards. Complies with JIS (2001/1994/1982), ISO-1997VDA, and ANSI roughness regulations. - In addition to displaying calculation results, it can show calculation results for each section, evaluation curves, load curves, and amplitude distribution curves.

• Non-destructive testing

【Features】 ■ The 2.4-inch color LCD screen with backlight significantly improves visibility for work in dimly lit environments. ■ Measurement conditions can be saved in internal memory for up to 10 entries, and measurement results for 1 entry. ■ Various functions can be restricted by password access, preventing erroneous operations and managing settings. ■ The display language supports 16 languages and can be switched as needed. ■ The stylus alarm function notifies when the cumulative measurement distance exceeds a pre-set "threshold." ■ It supports various roughness standards. (JIS-B0601-2001, JIS-B0601-1994, JIS-B0601-1982, VDO, ISO-1997, ANSI) ■ In addition to displaying calculation results, it can show calculation results for each section, evaluation curves, load curves, and amplitude distribution curves.

• Non-destructive testing

**Features** - Extremely thin insertion cable with a diameter of 6.9mm. The cable uses a metal blade to minimize resistance during insertion, allowing for smooth pushing into curved areas. - Audio recording function. With the included hands-free earphone microphone, audio can be saved along with video. This allows for audio recording of information during observation. - Easy angle operation in all directions (360°). The curved operation at the tip uses a new joystick mechanism, making it easy to perform curved operations in complex environments. Simply releasing your finger from the joystick accurately maintains the curved shape, providing convenience focused on inspection tasks. - Compact body that can be held with one hand. Comes standard with a dedicated stand, which is useful for securing the device and hands-free use. - Equipped with high-brightness LED. The tip of the camera cable has a built-in ultra-bright white LED. It allows for five levels of brightness adjustment from OFF to HIGH, enabling optimal brightness settings according to the subject and shooting conditions for observation. - Battery-operated for easy use anywhere. It can be continuously used for 1.5 hours with four AA alkaline batteries. It can also be used with the included AC adapter in locations with power supply.

• Non-destructive testing

**Features** - Extremely thin insertion cable with a diameter of 6.9mm. The cable uses a metal blade to minimize resistance during insertion, allowing for smooth pushing into curved areas. - Audio recording function. With the included hands-free earphone microphone, audio can be saved along with video, enabling voice recording of information during observation. - Easy angle operation in all directions (360°). The curved operation at the tip uses a new joystick mechanism, making it easy to maneuver in complex environments. Simply releasing your finger from the joystick maintains the curved shape accurately, providing convenience focused on inspection tasks. - Compact body that can be held with one hand. Comes standard with a dedicated stand, useful for securing to equipment or hands-free use. - Equipped with high-brightness LED. The tip of the camera cable has a built-in ultra-bright white LED. It allows for five levels of brightness adjustment from OFF to HIGH, enabling optimal brightness settings according to the subject and shooting conditions for observation. - Battery-operated for easy use anywhere. It can be used continuously for 1.5 hours with four AA alkaline batteries. It can also be used with the included AC adapter in locations with power supply.

• Non-destructive testing

**Features** - Extremely thin insertion cable with a diameter of 6.9mm. The cable uses a metal blade to minimize resistance during insertion, allowing for smooth pushing into curved areas. - Audio recording function. With the included hands-free earphone microphone, audio can be saved along with video. It allows for audio recording of information during observation. - Easy angle operation in all directions (360°). The curved operation at the tip uses a new joystick mechanism, making it easy to maneuver in complex environments. Simply releasing your finger from the joystick accurately maintains the curved shape, providing convenience focused on inspection tasks. - Compact body that can be held with one hand. Comes standard with a dedicated stand, which is useful for securing the device or hands-free use. - Equipped with high-brightness LED. The tip of the camera cable has a built-in ultra-bright white LED. It allows for five levels of brightness adjustment from OFF to HIGH, enabling optimal brightness settings according to the subject and shooting conditions for observation. - Battery-operated for easy use anywhere. It can be used continuously for 1.5 hours with four AA alkaline batteries. It can also be used with the included AC adapter in locations with power supply.

• Non-destructive testing

**Features** - Extremely thin insertion cable with a diameter of 3.9mm. The cable uses a metal blade to minimize resistance during insertion, allowing for smooth pushing into curved areas. - Audio recording function. With the included hands-free earphone microphone, audio can be saved along with video. This allows for voice recording of information during observation. - Easy angle operation in all directions, 360°. The tip's curvature operation employs a new joystick mechanism, making it easy to maneuver in complex environments. Simply releasing your finger from the joystick accurately maintains the curved shape, providing convenience focused on inspection tasks. - Compact body that can be held with one hand. Comes standard with a dedicated stand, useful for securing to equipment or hands-free use. - Equipped with high-brightness LED. The tip of the camera cable has a built-in ultra-bright white LED. It allows for five levels of brightness adjustment from OFF to HIGH, enabling optimal brightness settings according to the subject and shooting conditions for observation. - Battery-operated for easy use anywhere. It can operate continuously for 1.5 hours with four AA alkaline batteries. In locations with power, it can also be used with the included AC adapter.

• Non-destructive testing

■ 3.9mm ultra-thin insertion cable The cable features a metal blade, minimizing resistance during insertion and allowing for smooth pushing into curved areas. ■ Audio recording function With the included hands-free earphone microphone, audio can be saved along with video. It allows for recording information during observations. ■ Easy angle operation in all directions 360° The tip's curvature operation employs a new joystick mechanism, making it easy to maneuver in complex environments. Simply releasing your finger from the joystick accurately maintains the curved shape, providing convenience focused on inspection tasks. ■ Compact body that can be held with one hand Equipped with a dedicated stand as standard, it aids in securing the device and hands-free use. ■ High-brightness LED The tip of the camera cable is equipped with a super-bright white LED. It allows for five levels of brightness adjustment from OFF to HIGH, enabling optimal brightness settings according to the subject and shooting conditions for observation. ■ Easy to use anywhere with battery power It can be used continuously for 1.5 hours with four AA alkaline batteries. In locations with power, it can also be used with the included AC adapter.

• Measurement and analysis equipment leasing and rental

【Features】 ■ High-resistance snake tube that is strong against friction and crushing The scope section uses a high-performance snake tube that excels in crush resistance and abrasion strength. ■ Large outdoor-type inch monitor Equipped with a low external light reflection type 6.5-inch monitor. It allows for more accurate judgments on whether an issue is due to corrosion or dirt, and it does not miss small scratches that may have gone unnoticed before. ■ High-brightness LED lighting The tip of the scope is equipped with high-brightness white LED lighting, providing bright light that accurately captures the inspection target. ■ TF snake tube with enhanced insertability A TF snake tube is used, which is soft at the tip and becomes harder towards the base. This improves passage and pushability in bends (elbows). It demonstrates its effectiveness in inspecting pipes with many bends, as well as inside engines and equipment, reducing troubles by minimizing excessive pushing operations. ■ Digital image capture and storage The included USB flash memory (1GB) can record over 3,000 still images (JPEG format).

• Non-destructive testing

【Features】 ■ Thin and compact design that enables comfortable inspections in various styles ■ Environmentally resistant and shockproof performance compliant with IP55 standards, all-weather model ■ 6.5-inch large screen monitor ■ User-friendly icon menu for beginners

• Non-destructive testing

【Features】 ■ The outer diameter of the insertion part is only 2.4mm, allowing observation of areas that were difficult to reach with conventional videoscopes. ■ Equipped with a bending mechanism, the scope tip can accurately reach deep into complex inspection targets with excellent response in bending operations.

• Non-destructive testing

【Features】 ■ Bright and clear images allow for the precise identification of problematic areas and defects during visual inspections. ■ Stereo measurement to assess the size and depth of defects such as wounds discovered by the endoscope. ■ The number of measurement points has increased to five, which helps in understanding the object's distance in real-time, even in situations where the subject is tilted or there are height differences.

• Non-destructive testing

【Features】 ■ Battery-operated, suitable for any location ■ Capable of saving observation images

• Measurement and analysis equipment leasing and rental

【Features】 ■ Compact design that can be easily held with one hand. ■ Excellent reproducibility of ±0.5% F.S. ■ One-touch data memory and average value calculation.

• Photocatalysts and various wall materials (exterior and interior walls, etc.)
• Measurement and analysis equipment leasing and rental

【Features】 ■ Compact and lightweight, can be used with one hand. ■ Compatible with alkaline batteries, nickel-metal hydride rechargeable batteries, and AC adapters. ■ Viscosity can be read directly in decipascal seconds (SI unit system).

• glue
• paint

【Features】 ■ By measuring the metal wear particles contained in the grease within the bearing, it is possible to confirm the wear condition before the vibration values increase. ■ Effective for bearing diagnosis in low-speed and variable-speed rotating machines. ■ Measurement can be easily performed by simply inserting a sample of grease. ■ Portable (weight 480g), allowing for measurements on-site. ■ Minimum resolution of 0.001% (Wt), capable of detecting trace amounts.

• Non-destructive testing

【Features】 ■ By measuring the metal wear particles contained in the lubricating oil within the bearing, it is possible to confirm the wear condition before the vibration levels increase. ■ Effective for bearing diagnosis in low-speed and variable-speed rotating machinery. ■ Easy measurement by simply inserting the sample oil. ■ Portable (weighing 480g), allowing for measurements on-site. ■ Minimum resolution of 1ppm (Wt), capable of detecting trace amounts.

• Measurement and analysis equipment leasing and rental

**Features** - The patented THRU-COAT technology allows for the measurement and display of the thickness of metal and coating using a single bottom echo. - The temperature compensation function adjusts the material sound velocity in response to changes in material temperature. - The average/minimum mode saves the average or minimum thickness measurement values. - The A-scan display has improved contrast and visibility, achieving a brighter display. - A wide range of dual and single transducers (contact type, delay line type, immersion type) are available for use. - The EMAT transducer can measure the thickness of iron without using a coupling medium from surfaces with scale buildup. - Grid point flags (minimum, maximum, alarm, A-scan) can be selected. - The grid file can be expanded by adding columns or rows or changing the direction of increase. - The file-based alphanumeric data logger allows for a maximum of 32 characters in the file name and up to 20 characters in the ID number.

• Measurement and analysis equipment leasing and rental
• Non-destructive testing

**Features** - Stores up to 5,390 measurement data points - Easy operation of all functions with fewer keys - Quick automatic calibration through automatic probe zero point adjustment - Large, easy-to-read display with backlight - Thickness upper and lower limit settings with LED alarm - Automatic identification of DIALOG intelligent probes - Resolution and unit selection of 0.001 inch, 0.01 inch, 0.1 mm, and 0.01 mm - Wide range of measurements for various materials - Frequency selection using band filters suited to the probe frequency - Minimum value detection (25 times per second) in minimum capture mode - DUAL MULTI function (measures only the base material thickness without removing the coating)

• Non-destructive testing

**Features** - DUAL MULTI function: Measures the thickness of the substrate coated with just one button. - When using the DUAL MULTI function, it can measure the substrate thickness of approximately 2 to 30 mm over paint, plastic coatings, etc. - Optimal measurement sensitivity can be adjusted with automatic sensitivity adjustment/manual sensitivity adjustment (Lo/Med/Hi/Auto). - Upper and lower limit settings available (with LED alarm). - Comparison mode (Dif Mode) displays the difference between the set reference thickness and the measured thickness. - Pocket-sized for one-handed operation. - All functions can be easily operated with fewer keys. - Backlit display that is large and easy to read. - Frequency selection through band filters that match the frequency of the probe. - Automatic gain adjustment. - Automatic identification of DIALOG intelligent probes. - Minimum value detection (25 times per second) with minimum capture mode.

• Non-destructive testing

【Features】 ■ Weighs only 223g (including battery) ■ Battery operation lasts approximately 60 hours ■ Complies with European standard EN 15317 ■ Equipped with a backlit LCD display for clear visibility in all environments ■ Few operation keys and an easy-to-understand menu structure allow for simple one-handed operation ■ Rich features including Min/Max capture, B-scope display, alarms, and thickness measurement ■ Dual multifunctionality enables easy and accurate measurement of the substrate thickness without removing coatings or paint

• Non-destructive testing

【Features】 ■ You can start using it immediately by simply adjusting the zero point and sound speed. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ Thanks to the sound speed memory, once the sound speed is adjusted, the set sound speed value is retained even when the power is turned off, and no further adjustments are needed until the material of the test specimen changes. ■ The coupling mark is displayed on the LCD screen to check whether the ultrasound is being correctly received, allowing you to determine if the measurement is normal. ■ It is compact and lightweight, powered by a single AA alkaline battery, making it suitable for long-term use in the field.

• Non-destructive testing

【Features】 ■ Just by performing zero point adjustment and sound speed adjustment, it can be used immediately. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ With the sound speed memory, once the sound speed is adjusted, the set sound speed value is retained even when the power is turned off, and no further sound speed adjustment is needed until the material of the test specimen changes. ■ A coupling mark is displayed on the LCD screen to check whether the ultrasound is being received correctly, allowing for a judgment on whether the measurement is normal. ■ Compact and lightweight, it can be used for extended periods in the field with just one AA alkaline battery.

• Non-destructive testing

【Features】 ■ You can start using it immediately by simply adjusting the zero point and sound speed. ■ The auto power-off function automatically turns off the power if there is no operation for more than 3 minutes. ■ Thanks to the sound speed memory, once you adjust the sound speed, it retains the set sound speed value even when the power is turned off, eliminating the need for further adjustments until the test material changes. ■ The coupling mark displayed on the LCD screen allows you to check whether the ultrasound is being received correctly, helping you determine if the measurement is normal. ■ It is compact and lightweight, powered by a single AA alkaline battery, allowing for long-term use in the field.

• Non-destructive testing

【Features】 ■ Covers a wide measurement range with a single unit (0.8 to 300mm) ■ Display resolution of 0.01mm (switchable between 0.01/0.1mm display) ■ Equipped with a scan mode that can measure the minimum thickness over a wide range ■ Displays the coupling status, allowing confirmation of contact state ■ Battery level indicator for dry batteries ■ Auto power-off function ■ Backlight function (easy to read display in dark environments)

• Non-destructive testing

【Features】 ■ 6.5-inch high-brightness LCD ■ Outdoor light environment compatible ■ Dustproof and drip-proof structure ■ Adopts the latest architecture

• Non-destructive testing

【Features】 ■ Operation in Japanese display. ■ Compact and lightweight at approximately 2.2 kg (including lithium-ion battery). ■ Adoption of a high-resolution, easy-to-read 1/4 VGA-TFT color screen (320×240 pixels, 115×86 mm) ensures clear images both indoors and outdoors. ■ User-friendly menu structure and shape: adjustable screen with a ratchet stand that also serves as a handle with anti-slip features. ■ Easily identifiable gates with color display. ■ Enlarged window for selecting and displaying easily readable measurement values. ■ Equipped with A-scope freeze function and zoom function. ■ Data directory function allows for quick understanding of data content. ■ Semi-auto calibration function facilitates easy adjustment of measurement range.

• Non-destructive testing

【Features】 ■ Compliant with EN12668-1 ■ Lightweight at 0.96kg ■ Multi-color VGA display using semi-transmission technology ■ Compatible with Mini SD cards, equipped with a standard alphanumeric data logger storage device ■ Standard dynamic DAC/TVG ■ Digital high dynamic range receiver with digital filter

• Non-destructive testing