ソーキ List of Products and Services

■Transmission output: Simultaneous call: 1mW / Simplex call: 10mW (configurable setting) ■Number of channels: 27ch

• others

■Transmission Output Simultaneous Communication: 1mW / Simplex Communication: 10mW (configurable setting) ■Number of Channels Simultaneous Communication: 18ch / Simplex Communication: 11ch

• others

Measurement range: 50 to 95% RH

• Structural Survey

It is also excellent in operability, allowing anyone to use it easily. This is a highly accurate device that is ideal for use in non-destructive testing (NDT), such as measuring ultraviolet light intensity and illuminance in dark rooms. It also comes with traceability to NIST (National Institute of Standards and Technology), which is essential in the aviation industry. ■ Measurement range: Ultraviolet intensity 0–100mW/cm² (0-100,000μW/cm²) ■ Illuminance: 0-5,300Lux (0-500fc) ■ Measurement wavelength range: Ultraviolet intensity: 320–400nm ■ Illuminance: 460–675nm

• Other measuring instruments

Rotating at a speed of 1 revolution per minute on the source rod. High-precision data can be measured quickly.

• Geological Survey

When the set speed is exceeded, the patrol light activates and alerts with a voice warning. ■Measurement range: 8 to 322 km/h

• others

■Compatible models (rental equipment available) FTH-208, FTH-508, VX-D291U, VXD-10

• others

In the information-based construction of embankments, it is possible to easily, quickly, and accurately measure the work of confirming that the water content ratio of the embankment material falls within the range that achieves the specified compaction degree.

• Geological Survey

This is a hazardous gas detector that measures and displays the concentrations of combustible gases, hydrogen sulfide, carbon monoxide, and oxygen, with a mass of only 100g, making it the smallest in the world. It alerts users with a buzzer when alarm settings are triggered. 【Features】 ■ Intrinsically safe explosion-proof structure (Exia2 CT4XGa) ■ Protection grade equivalent to IP67, ensuring safety for outdoor work ■ Three-directional alarm lamp and two-directional buzzer to notify the carrier and surrounding individuals of danger ■ Alarm sound volume of approximately 95dB, ensuring it can be heard even in noisy environments ■ Simultaneous display of four gas concentrations on a large LCD screen ■ Combustible gas reading function / No complicated conversions needed / Direct reading of concentrations for 26 types of combustible gases * Settings are retained even after power ON/OFF ■ Adjustable alarm point settings / Settings can be changed through the operation of the GX-3R main unit ■ Lunch break function / TWA values and peak values are retained, allowing cumulative measurements regardless of power ON/OFF ■ Confirmation beep function / A feature that indicates the detector is functioning normally, with the buzzer sounding at set intervals during measurement ■ Calibration notification function / Displays the number of days until the recommended inspection date after power is turned on, preventing oversight of inspections and allowing for safer use ■ Includes clock display, data logger function, and temperature display

• Environmental Survey

By simply connecting a cable to the metal part of the water faucet, you can detect the bracing in various parts of the house.

• Non-destructive testing

This is a COD (Chemical Oxygen Demand) meter that allows for the rapid and simple measurement of COD, which is established as an important indicator of water quality pollution for water use, wastewater, and river water under total water quality regulation. It provides a direct reading of the COD value of the sample water in mg/L. 【Features】 ■ Simplified blank measurement ■ Easy-to-understand operation panel

• Water quality/pH measuring device

You can measure the actual area and line length from the drawing.

• Surveying

You can measure the actual area and line length from the drawing.

• Surveying

When working in areas with overhead wires such as traffic lights and signs, a sensor attached to the boom will sound an alarm with sound and light if it exceeds the set angle. This is effective when overhead wires are difficult to see during nighttime work or when the operator is focused on the task and forgets about the overhead wires. 【Features】 ■ Easy to install regardless of the model ■ Alarm angles can be freely set via the controller ■ The tilt detection sensor measures absolute angles relative to horizontal, independent of ground or body tilt ■ Alarm with sound and light (LED) ■ The status of the sensor can be confirmed from the outside ■ Volume can be set to three levels: loud, soft, and mute

• others

Both the upper and lower parts can achieve a magnification of 20 times for precise vertical measurements.

• Surveying

The slip resistance of floors, surfaces, ramps, and stairs is a very important performance aspect in terms of safety and comfort during operation. With the recent increase in awareness of the importance of slip resistance, this portable slip testing device allows for easy and valid measurement of slip resistance on-site.

• Non-destructive testing

Achieved pinpoint measurement using small-diameter visible light laser. 【Features】 ■ Non-prism range of 400m By expanding the measurement range without a prism, the movement of the instrument point is reduced, improving work efficiency. ■ Same light source for distance measurement and laser pointer ■ Initial speed of 1.7 seconds, maximum of 4.2 seconds Improvements in the non-prism measurement algorithm reduce variations in measurement time due to differences in distance and target objects, enabling speedy observations in all situations. ■ Automatic switching of measurement laser In reflective sheet or prism measurement mode, the laser output switches to Class 1 level. Distance measurement can be performed with a laser that considers safety. ■ Equipped with a large display featuring easy-to-read kanji characters ■ The display and keyboard are equipped with a backlight, allowing for easy operation even in twilight conditions.

• Surveying

It is easy to carry due to its compact and lightweight design. The hydraulic circuit is equipped with a shock absorber, making it suitable for use with impact wrenches. 【Features】 ■ A simple measuring device for the tightening characteristics of standard products ■ Can be used for a wide range of applications, such as simple evaluation of bolt strength and torque counting when combined with a torque wrench ■ Excellent durability due to its hydraulic design ■ The hydraulic circuit includes a shock absorber, allowing it to be used with impact wrenches ■ Easy to carry due to its compact and lightweight design

• Non-destructive testing

It is useful for inventorying small parts. Since it is a small scale with minimal display, please install it on a hard, level surface and be careful of influences such as wind while using it. 【Features】 ■ Count mode ■ Percent mode ■ Limit function (can be used in both count mode and percent mode)

• Other measuring instruments

It is useful for inventorying small parts. Since it is a small scale with minimal display, please install it on a hard, level surface and be careful of influences such as wind during use. 【Features】 ■ Count mode ■ Percent mode ■ Limit function (can be used in both count mode and percent mode)

• Other measuring instruments

This is a measuring device that simply measures, calculates, and displays PMV (Predicted Mean Vote), which is one of the indicators of thermal comfort that quantifies sensations related to thermal environments such as hot and cold. - Portable type for easy transport. - Automatic measurement with configurable sampling intervals. - Data memory for 1000 readings. - PMV and PPD values can be set.

• others

The instantaneous wind speed and average wind speed (10 minutes) can be displayed simply by switching, and it can also sound an alarm when the set warning value is reached. 【Features】 ■ It is a digital anemometer with an alarm that supports generator systems. ■ It is possible to switch between instantaneous wind speed and 10-minute moving average wind speed values using a switch. ■ The alarm level can be easily set using a digital switch, and when the set value is exceeded, it will alert with a flashing display and a buzzer. ■ It is also equipped with terminal contacts for external output.

• Anemometer

By selecting the output frequency band from nine different types, it has become possible to flexibly respond to differences in leakage sounds caused by different types of pipes and to ambient noise occurring on-site. 【Features】 ■ Newly adopted vibration-damping rubber significantly reduces wind noise and sensor noise ■ The meter is designed with a wide angle for better visibility, distinguishing volume based on levels ■ The filter has low-frequency (three types) and high-frequency (three types) options, allowing for nine combinations for easy listening ■ Compact design for measurement

• Non-destructive testing

This is a digital scale equipped with a checker function (upper and lower limit setting mode) that demonstrates its power in weight inspection, as well as a counting function (counting mode). It can measure up to a maximum of 60 kg. 【Features】 ■ Upper and Lower Limit Setting Mode You can set upper and lower limits to use it as a weight checker. ■ Counting Mode It can also be used as a counting scale with a one-touch switch.

• Other measuring instruments

This is a digital scale with a checker function that demonstrates its power in weight inspection (upper and lower limit setting mode) and a counting function (counting mode), allowing for three different capacity switches. The minimum display varies depending on the switched capacity. ■ Three capacity switches - Capacity: 30kg / Minimum display: 10g - Capacity: 60kg / Minimum display: 20g - Capacity: 150kg / Minimum display: 50g ■ Upper and lower limit setting mode You can set upper and lower limits to use it as a weight checker. ■ Counting mode It can also be used as a counting scale with a one-touch switch. ■ Includes a piece count mode.

• Other measuring instruments

This is a digital scale that features a checker function (upper and lower limit setting mode) that demonstrates its effectiveness in weight inspection, as well as a counting function (counting mode), allowing for two selectable capacities. The minimum display changes depending on the selected capacity. ■ Two selectable capacities - Capacity: 30kg / Minimum display: 10g - Capacity: 15kg / Minimum display: 5g ■ Upper and lower limit setting mode You can set upper and lower limits to use it as a weight checker. ■ Counting mode It can also be used as a counting scale with a one-touch switch. ■ Includes a piece count mode.

• Other measuring instruments

This is a digital scale that features a checker function (upper and lower limit setting mode) for weight inspection and a counting function (counting mode), allowing for two selectable weighing capacities. The minimum display varies depending on the selected weighing capacity. ■ Two selectable weighing capacities - Weighing capacity: 150kg / Minimum display: 50g - Weighing capacity: 60kg / Minimum display: 20g ■ Upper and lower limit setting mode You can set upper and lower limits to use it as a weight checker. ■ Counting mode It can also be used as a counting scale with a one-touch switch. ■ Includes a piece counting mode.

• Other measuring instruments

■Weight: Approximately 14kg

• Structural Survey

■Weight: Approximately 14kg

• Structural Survey

The traditional Swedish penetration test was very labor-intensive, but this machine only requires you to turn on a switch since the rotation is done by an electric motor.

• Geological Survey

This is a constant temperature dryer of the constant value operation type, which allows for more straightforward operation of its enhanced features.

• Other measuring instruments

It does not react to surrounding cones or guardrails, so it does not emit unnecessary alarm sounds. *Additional options for the helmet sensor and charger are available. 【Features】 ■Detects with sensors. Alerts both workers and drivers to danger. When a worker equipped with a helmet sensor enters the detection area of the flexible sensor (infrared emitter), the driver is alerted by an operator buzzer, and the worker is notified by an alarm sound from the helmet sensor. The flexible sensor can be extended to match the size of the backhoe. The sensor is mounted at the rear with a magnet. ■Adopts a charging method. Minimal wiring hassle and easy attachment/detachment. The flexible sensor and helmet sensor use a charging method, making them easier to use than relying on the vehicle's power supply. The operator buzzer is attached to the driver's side with a magnet. The buzzer volume can be switched between loud, soft, and silent using a toggle switch. ■Compact and lightweight sensor attached to the helmet, does not interfere with work. The helmet sensor is attached to the helmet with a rubber belt. It is lightweight and easy to install. The helmet sensor can detect within a reception range of 240° behind the worker. Additionally, when the battery is low, an electronic buzzer and vibration will operate continuously for about 2 minutes to alert the worker.

• others

The collected data can display the maximum, average, and minimum values on a computer screen, and it is also possible to create graphs. By conducting multi-point measurements, it is ideal for understanding the functionality of water pipelines. 【Features】 ■ Equipped with settings and data transfer functions via Wi-Fi communication * Data recording software DLS-WS is included ■ Data storage using SDHC cards ■ Water hammer measurement function included ■ High data resolution with 16-bit performance ■ GPS equipped for time synchronization and acquisition of latitude and longitude information

• Non-destructive testing

The device consists of a receiver and a transmitter, and it has two modes: a natural wave mode where the receiver performs live wire detection independently, and a search mode where the transmitter sends a special signal through a cable or metal pipe that is detected by the receiver for exploration. It can detect the positions of various cables and is capable of measuring even those with strong noise, such as high-voltage lines, ADSL, ISDN, and LAN lines. 【Receiver】 - Most functions of the receiver are automated, allowing confirmation of the cable routing through numerical display on an LED/LCD screen and sound in three ways. - Thanks to the signal amplification feature, it can detect all signals except for very weak ones. When the signal amplification feature is active, a plus sign (+) is displayed on the LED. - The receiver can be used independently in natural wave mode and in conjunction with the transmitter in search mode. 【Transmitter】 - The transmitter emits a special signal at 33.3KHz tailored for the receiver. This signal has minimal inductive interference and does not affect PCs or other devices. - The transmitter can send signals to the cable using three methods (direct method, clamp method, and indirect method). - Depth display units are in feet. - It is compact and lightweight, making it easy to work with.

• Non-destructive testing

It is mainly used for machine assembly, etc. ■ Made of high-quality cast iron (FC25) with complete seasoning. ■ Size is 250mm, sensitivity is 0.02 (4 seconds).

• Surveying

It is used to determine the amount of deformation in asphalt pavement caused by vehicle movement and to investigate the condition of the completed pavement slab, as well as to assess the amount of subsidence in asphalt and concrete pavements or the subsidence at cracked areas, providing foundational data for selecting pavement repair methods.

• Geological Survey

It is equipped with a display function for actual measurement (d), allowing you to read one digit below the measurement (e). Due to its small minimum display scale, please install it on a hard, level surface and take care to avoid influences such as wind. 【Features】 ■ The display section features a large LCD that is easy to read, and the simple key layout makes it easy to use. ■ It is equipped with various functions such as counting mode, percentage mode, and limit function. ■ The unique high-speed stability of the tuning fork enhances work efficiency.

• Other measuring instruments

The actual display quantity (d) is equipped with a display function that allows you to read one digit below the nominal quantity (e). Due to the small scale of the minimum display, please install it on a hard, level surface and be sure to pay attention to influences such as wind during use. 【Features】 ■ The display section features a large LCD display that is easy to see, and the straightforward key layout makes it simple to use. ■ It is equipped with various functions such as counting mode, percentage mode, and limit function. ■ The unique high-speed stability of the tuning fork enhances work efficiency.

• Other measuring instruments

The automatic hydraulic pump gradually increases the pressure, allowing for highly reproducible and stable measurement results. 【Features】 ■ User-friendly menu structure that supports multiple languages ■ Compatible with dollies of diameters 10, 14.2, 20, and 50 mm ■ Allows setting the pull-off pressure and maintaining it for a specified duration ■ Pull-off speed can be adjusted in the range of 0.1 to 1.4 MPa/second (15 to 203 psi/second) to meet domestic and international standards ■ Capable of saving up to 60,000 reading values, pressure rise graphs, and destruction characteristic information in 2,500 batches (with alphanumeric names)

• Non-destructive testing

This is a total station equipped with automatic tracking and automatic aiming functions. It features a laser pointer and is a non-prism model.

• Surveying

It is a natural convection type, and the temperature control range can accommodate up to 280°C. It is equipped with an overcurrent leakage breaker and an independent overheat prevention device, ensuring safe use. 【Features】 ■ Simple operation allows for constant value operation and auto-stop operation. ■ Equipped with a leakage breaker with current flow and an independent overheat prevention device.

• Other measuring instruments

■Sample mass: 5 to 70g (arbitrary mass sampling method) ■Mass reading limit: 5mg

• Other measuring instruments

Reagents are not required, and it can be used at a low running cost. Additionally, it is lightweight, making it convenient for portability. 【Features】 ■ No need to replace reagents for each measurement ■ Fully automatic operation allows measurement with just the press of a button. ■ Easy-to-read LCD panel display with backlight ■ Can store up to 32 measurement values ■ Concentration unit display can switch between mg/m3 and ppm ■ Measurement time can switch between 10-minute, 30-minute, and 60-minute measurement modes ■ Dual power supply system: AC (adapter) and DC ■ Equipped with battery life alarm function

• Environmental Survey

Reagents are not required, and it can be used at a low running cost. Additionally, it is lightweight, making it convenient to carry. 【Features】 ■ Lightweight and easy measurement ■ Measurement time is approximately 10 minutes ■ Battery-operated, allowing use in locations without AC power supply

• Environmental Survey

Achieves high visibility with the use of a semiconductor green laser that excels in visibility. This is a pipe laser capable of extensive slope settings. It has passed environmental tests designed for harsh job sites. It is indispensable for sewer pipe installation work.

• Surveying