ソーキ List of Products and Services

■Measurement range: Up to an average wind speed of 22 m/s

• Anemometer

【Measurement Range】 ■Temperature: -15 to +40℃ ■Humidity: 0 to 100% RH …etc. *For more details, please download the PDF from our website or feel free to contact us.

• Hydrological survey

■Measurement range: 500N (50kgf) ■Minimum display: 0.1N ■Power supply: Built-in battery / AC100V

• Other measuring instruments

Measurement range: -40°C to +40°C

• Hydrological survey

Measurement range: -40 to +40℃

• Hydrological survey

Measurement range: -40 to +40℃

• Hydrological survey

Measurement range: 2 to 60 m/s

• Anemometer

■Measurement range: -2.00 to 16.00 pH ■Resolution: 0.01 pH

• Geological Survey

Measurement range: 0 to 8mm

• Structural Survey

■Measurement range: 0 to 60 m/s ■Sampling interval: Instantaneous value at 1-second intervals / Average value at 1-second intervals ■Alarm output: Primary and secondary alarm output

• Anemometer

Measurement range: 0 to 60 m/s

• Anemometer

■Measurement range: 0 to 600μm

• Structural Survey

Measurement range: 0 to 20mm

• Structural Survey

Measurement range: 0 to 2,000 μm

• Structural Survey

■Measurement range: 0 to 10m / 0 to 5m / 0 to 2m / 0 to 1m *Switchable

• Hydrological survey

■Measurement range: 0 to 10m, 0 to 5m, 0 to 2m, 0 to 1m *Switchable

• Hydrological survey

■Measurement range (compressive strength): 10 to 70 N/mm² ■Impact energy: 0.74 N

• Structural Survey

■Measurement range (compressive strength): 0.2 to 5 N/mm² ■Impact energy: 0.88 Nm

• Structural Survey

[Measurement Range] ■Wood: 7–35% ■Mortar: 0–15%

• Structural Survey

■Measurement Range ・Wind Speed: 2 to 60 m/s (Starting Wind Speed 2.0 m/s) ・Wind Direction: 16 Directions

• Anemometer

【Measurement Range】 ■Wind Speed: 2 to 60 m/s ■Wind Direction: 1 to 360°

• Anemometer

Measurement range Wind speed: 0 to 20 m/s Temperature: -20 to +50°C

• Anemometer

■Measurement Range ・Electromagnetic: 0 to 2.50mm ・Eddy Current: 0 to 2.00mm

• Structural Survey

■Measurement Range ・Electromagnetic: 0 to 2.50mm ・Eddy Current: 0 to 2.00mm

• Structural Survey

■Measurement Range ・Mortar: 20–40% (volumetric water content) ・Ready-mixed concrete: 120–240 kg/m³ (unit water amount)

• Geological Survey

■Measurement Range - Mortar: 20-40% (volumetric water content) - Ready-mixed concrete: 120-240 kg/m3 (unit water amount)

• Geological Survey

■Measurement Range ・Mortar: 20-40% (volumetric water content) ・Ready-mixed concrete: 120-240 kg/m3 (unit water amount) ・Fine aggregate: 15% or less (surface water content)

• Geological Survey

■Measurement Range ・Mortar: 20–40% (volumetric moisture content) ・Ready-mixed concrete: 120–240 kg/m3 (unit water amount) ・Fine aggregate: 15% or less (surface moisture content)

• Geological Survey

【Measurement Range】 ■Concrete: 0 to 12% ■Mortar: 0 to 15% ■ALC: 0 to 100%

• Structural Survey

■Measurement Range ・Temperature: -40.0 to +85.0℃ ・Humidity: 0.0 to 100.0% RH

• Hydrological survey

■Measurement Accuracy ・Less than 40mm: within ±2mm ・40mm or more: within ±5%

• Structural Survey

The measuring device itself is fundamentally a hydraulic system, with a hole in the center of the body for inserting a test bolt. By tightening the bolt, nut, and washer set in this hole with a Tonesha wrench, hydraulic pressure is generated inside the measuring device. This hydraulic pressure is then converted into a value representing the axial force (tension) of the bolt, which is displayed on the dial gauge, allowing for direct reading of the axial force. ■ Equipped with a protector that withstands harsh conditions It firmly protects the gauge section even under severe usage conditions. ■ Large, easy-to-read Newton display scale The pointer is synchronized with the tightening speed, making measurement tasks easier. ■ Bolt rotation stop Bolt rotation stops are applied to the plate and bushing. ■ Field-compatible clamp device Convenient for attachment to steel frames and other structures. ■ Compact, lightweight, and high precision

• Non-destructive testing

■Measurement pressure: 2.0 MPa ■Measurement time: 15/30/60 min (3-stage switching)

• Non-destructive testing

■Measurement pressure: 0.5/1.0/1.4/2.0 MPa (Note: The measurement water pressure is not switchable) ■Measurement time: 4/12/24/72/168 h (5-step switching)

• Non-destructive testing

■Measurement range (when using PV-62) Acceleration (m/s²): 0.3 / 13 / 10 / 30 / 100 / 300 / 1,000

• Vibration and Sound Level Meter

The measurement mode has two types: instantaneous value and maximum value hold, allowing for vibration measurement related to human body vibrations using a hand-arm vibration measurement card. It enables the assessment of exposure to hand-arm vibrations from machinery and tools. ■Three-directional acceleration measurement is possible.

• Vibration and Sound Level Meter

The measurement mode has two types: instantaneous value and maximum value hold, and it is a vibration measurement system related to the habitability of passenger ships and commercial vessels using the ship vibration measurement card VX-54WS. ■Acceleration measurement is possible in three directions: X, Y, and Z.

• Vibration and Sound Level Meter

**Features** - Built-in real-time frequency analysis function: 1/3 or 1/1 octave frequency analysis is possible with this single unit (main channel). - Dual measurement of main and sub-channels: With two noise measurement circuits, it allows for simultaneous measurement by selecting frequency weighting characteristics or time weighting characteristics, such as measuring with "A-weighting" while recording a "C-weighting" signal. - Equipped with a comprehensive data memory function: Data can be saved in manual or auto mode. One block of memory is reserved for manual storage and two blocks for auto storage. - Infrared remote control port: Remote operation is possible with an infrared remote control that has 18 functions. - Backup function: The settings for level range and frequency weighting characteristics of the noise meter are retained even when the power is turned off, allowing you to set it back to the same settings as the last measurement just by turning the power on. - Energy-efficient design for continuous 8-hour measurement: Achieves double the operating time of conventional models with alkaline battery specifications. - Large LCD display with backlight allows for nighttime measurements.

• Vibration and Sound Level Meter

You can record the values measured by a sound level meter or vibration meter on roll paper. The paper feed speed can be increased to create a clearer record only while the measured noise level or vibration level exceeds the measurement level. 【Features】 ■ Control of each operation of the pen, paper feed, and marker is possible ■ Measurement of paper feed control is possible ■ Can be linked with level processing devices and others

• Vibration and Sound Level Meter

You can record data from noise meters and vibration level meters onto a memory card. In particular, it is equipped with terminals for connecting microphones or pickups and a sensor drive power supply (CCLD) for capturing sound and vibration waveforms. 【Features】 ■ Up to 4 channels of electrical signals can be recorded. ■ The casing is compact and lightweight, and using four AA alkaline batteries allows for approximately 8 hours of continuous operation. (Conditions: 23°C, frequency range 20kHz, 4-channel input, no CCLD, backlight off) ■ It has terminals for easily connecting sensors, including microphones and acceleration pickups, and is compatible with CCLD. ■ The frequency range covers DC to 20kHz, accommodating a wide variety of phenomena for recording. ■ Recorded data is written to compact flash in the commonly used WAVE format. ■ It allows for voice recording (voice memos) and marker recording, making data organization easier later on. ■ Recorded data can be played back. ■ It has no moving parts, allowing for use in various environments. Operation is silent. ■ User-friendly switches.

• Vibration and Sound Level Meter

The noise and vibration meter displays data simultaneously while recording it, allowing for expansion into daily reports and other data formats. Additionally, the adoption of a touch panel display has made it more user-friendly. Being all-weather type, it can be installed outdoors and is capable of automatically recording the calculated results every 10 minutes onto a USB memory stick. 【Features】 ■ Easy settings with the touch panel display ■ Automatic recording of noise and vibration data every 10 minutes onto a USB memory stick ■ Built-in clock automatically calibrated by GPS signal ■ Automatic on/off display function (with timer for automatic off) ■ Lightweight design with aluminum body ■ All-weather type suitable for outdoor installation ■ Instantaneous noise and vibration levels displayed every second on a large digital display

• Vibration and Sound Level Meter

It can measure noise levels and output data to a level recorder. It is also capable of calculations such as equivalent noise level and time-weighted noise level. 【Features】 ■ Wide range of 100dB With a broad dynamic range, there is no need to switch ranges during measurement, allowing for safe long-duration measurements. ■ 24-hour battery life Continuous measurements can be easily conducted for long periods using dry batteries (when using alkaline batteries). ■ Built-in large-capacity memory For example, it can store instantaneous values every 100 milliseconds for up to 12 hours (432,000 data points). It can continuously store Leq and Lx every 10 minutes in the main memory for 50 days. ■ Built-in timer function Since the start and end times for automatic measurements can be set arbitrarily, simultaneous measurements at multiple points are now possible.

• Vibration and Sound Level Meter

It is possible to display the instantaneous values of noise and vibration levels on a large digital display every second, and to automatically record the calculated results of noise and vibration meter data to a USB memory every 10 minutes. 【Features】 ■ Timer unmanned measurement function ■ Automatic recording of calculated results of noise and vibration meter data to USB memory every 10 minutes ■ All-weather type, suitable for outdoor installation ■ Display of instantaneous values of noise and vibration levels on a large digital display every second ■ Warning light flashes when exceeding specified values ■ Automatic on/off function for the display

• Vibration and Sound Level Meter

It consists of a transmitter and a receiver. The transmitter is mounted on the boom of the truck-mounted crane, while the receiver is installed on the dashboard of the driver's seat. This setup allows the crane to operate with the boom raised, preventing accidents that could damage cables and other equipment. *The transmitter is equipped with an inclination sensor, and the receiver has a human detection sensor and alarm activation function. 【Features】 1. When the driver enters the driver's seat with the boom raised, the alarm lamp on the receiver lights up, alerting the driver with an alarm sound. 2. Communication between the transmitter and receiver is wireless, eliminating the need for wired connections. 3. The power supply for the receiver can be used in conjunction with a battery pack that includes a cigarette lighter.

• others

■Transmission output: 1mW

• others