ソーキ List of Products and Services

From civil engineering and construction work to interior design and finishing work, you can easily level everything by yourself.

• Surveying

From civil engineering and construction work to interior design and finishing work, leveling can be easily done by one person.

• Surveying

From civil engineering and construction work to interior design and finishing work, you can easily level everything by yourself.

• Surveying

It complies with the "Guidelines for Investigation and Testing of Soft Rock" by the Japan Society of Civil Engineers. The main body is equipped with a correlation chart between needle penetration gradient [NP] (N/mm) and unconfined compressive strength (kN/m²), allowing for immediate determination of the unconfined compressive strength of soft rock and stabilized consolidated soil without sampling.

• Geological Survey

The soil salinity meter PNT3000 uses stainless steel metal electrodes, allowing for easy insertion directly into the soil to measure the salinity concentration.

• Geological Survey

This is an instrument for measuring soil hardness, which is one of the indicators representing the physicochemical properties of soil. A cone is pressed vertically into a flatly cut cross-section, and both the penetration depth and the corresponding soil reaction (spring compression) are simultaneously measured as variables, from which the theoretical value of hardness (kg/cm²) is calculated.

• Geological Survey

This is a gas leak detector that detects gas leaks from city gas (13A), LPG, etc., and alerts you to gas leaks with a buzzer and lamp when a pre-set gas concentration is reached, helping to prevent gas leak accidents. 【Features】 ■ Gas leaks can be detected with the push of a single switch ■ Low battery voltage, pump, and sensor are indicated by a lamp

• Environmental Survey

You can measure alternating current while the power line is live, without disconnecting it. (This is an optional sensor for the Clamp Logger LR5051.)

• Other measuring instruments

The electrical conductivity indicates how easily electricity passes through water, and the more electrolytes present in the water, the more current flows. 【Features】 ■ Electrical resistivity and salinity conversion display options ■ General-purpose, high-functionality type

• Water quality/pH measuring device

This is an anemometer that can measure the air volume from vents and air intake openings in ceilings and walls.

• Anemometer

This is an analog type thickness gauge capable of measuring film thickness up to 5mm on a bare metal surface. It may also be referred to as a two-point or three-point contact method.

• Structural Survey

This is an analog thickness gauge capable of measuring film thickness up to 15mm on a metallic substrate.

• Structural Survey

Applicable standard: JGS 1431 (Portable Cone Penetration Test Method - Guidelines of the Japanese Geotechnical Society)

• Geological Survey

This is a mud density meter for easily measuring the density of mud on-site. The measurement range is 1.00 to 2.30, with a minimum scale of 0.01.

• Geological Survey

It can measure low-frequency sounds (1 to 500 Hz). It can measure low frequencies (1 to 100 Hz) that are difficult for humans to hear (or inaudible). 【Features】 - Equipped with G-weighting frequency characteristics and real-time analysis function for 1/3 octave bands. - Simultaneously measures low-frequency sound pressure levels (1 Hz to 100 Hz), G-weighted sound pressure levels, and 1/3 octave band levels (FLAT). - G-weighted frequency characteristics, RMS detection circuits, and 1/3 octave band filters utilize digital processing via DSP. - Data can be transferred to a computer via serial communication, allowing for editing in spreadsheet software.

• Vibration and Sound Level Meter

It emits low-frequency pulses and measures the time it takes for the pulse to travel from one transducer, through the test specimen, to the other transducer. It is applied to various diagnostics of concrete.

• Structural Survey

Typically, it uses an AC100V power supply, but it can also be used outdoors with the optional battery power adapter. 【Features】 ■Large LCD display for easy viewing ■Count mode ■Percent mode ■Limit function

• Other measuring instruments

In addition to standard weighing, it also features functions such as quantity setting and percentage setting. It can be used for purposes other than transaction proof for process management and research. 【Features】 ■ Quantity Setting By measuring the unit mass of the sample, it allows for quantity display (unit is PCS). The reference quantity for measuring the unit mass can be selected from 10, 20, 50, or 100, with higher quantities providing better accuracy. ■ Percentage Setting By setting the reference sample to 100%, it enables percentage display.

• Other measuring instruments

In addition to standard weighing, it also features functions such as quantity setting and percentage setting. It can be used for purposes other than transaction proof for process management and research. 【Features】 ■ You can register the necessary mode from three types of modes: g (gram mode), PCS (piece count mode), and % (percentage mode) for weighing. ■ Piece Count Mode By measuring the unit mass of the sample, it allows for piece count display (unit is PCS). ■ Percentage Mode By setting a reference sample to 100%, it allows for percentage display.

• Other measuring instruments

It reduces the impact energy compared to a standard Schmidt hammer and estimates the compressive strength in the range of 5 to 30 N/mm².

• Structural Survey

The ultrasonic testing machine Panzit Lab can measure not only propagation time but also propagation speed, measurement length, and crack depth.

• Structural Survey

The thickness of the coating is measured by measuring the propagation time of ultrasound. It is possible to measure even if the substrate is concrete, but measurements may not be possible due to conditions such as surface irregularities.

• Structural Survey

It is an ultrasonic thickness gauge that can measure the thickness of homogeneous metals and non-metals that allow ultrasonic waves to pass through.

• Structural Survey

This is a machine that detects internal defects (voids, cracks, foreign objects) in metals using ultrasound. *The probe and probe cable are not included. Please prepare them yourself.

• Structural Survey

This is a machine that detects internal defects (voids, cracks, foreign objects) in metals using ultrasonic waves. *The probe and probe cable are not included. Please prepare them yourself.

• Structural Survey

This is a machine that detects internal defects (voids, cracks, foreign objects) in metals using ultrasound. *The probe and probe cable are not included. Please prepare them yourself.

• Structural Survey

The ultrasonic sensor detects people and objects within the detection area and issues a voice warning from the speaker. At the same time, it alerts the operator with a rotating light. 【Features】 ■ Detection method: Ultrasonic reflection wave ■ Detection range ■ Distance: 5m ■ Vertical direction: 1.5m ■ Horizontal direction: 2.5m (may vary depending on the surrounding environment)

• others

When an obstacle enters the setting area of the ultrasonic sensor, it issues a warning through an electronic sound to alert the driver. *Optionally, it can be used with a battery, without drawing power from the vehicle. ■ The ultrasonic sensor detects overhead structures and prevents collisions in advance. ■ The detection distance can be switched between three levels: 1m, 1.5m, and 2m. ■ Installation, removal, and angle adjustment of the ultrasonic sensor are easy. ■ The electronic sound is divided into three levels, allowing the type of sound to indicate the remaining distance when an obstacle enters the set detection range. ■ The controller has a magnet for easy attachment and detachment from the inside surface of the basket. ■ In addition to sound, there is also an option for handling a rotating light.

• others

This is an improved ultrasonic thickness gauge for measuring the thickness of castings. It can measure the thickness of castings made of iron, aluminum, and their products.

• Structural Survey

It can record changes in the surface caused by landslides, and if a change of 2mm or 4mm occurs within one hour, it can output an alarm. ■Alarm Settings: 1-hour movement alarm switchable between 2mm/4mm.

• Hydrological survey

It can record surface changes caused by landslides and output an alarm if a change of 2mm or 4mm occurs within one hour. ■Alarm settings: 1-hour movement alarm switchable between 2mm/4mm.

• Hydrological survey

It is possible to measure four items: turbidity, color, residual chlorine, and transparency. The display, featuring a 3.5-inch color LCD, offers excellent visibility, and the displayed items can be set as desired. 【Features】 ■ Simultaneous measurement of turbidity and color in accordance with the Water Supply Act and drinking water testing methods ■ Equipped with a 3.5-inch LCD color display ■ Data can be saved to an SD card and displayed in Excel and other formats ■ Options for one-shot measurement or real-time measurement ■ Compact and convenient for portability

• Water quality/pH measuring device

It displays the noise level on a large digital display. It is easy to hold and reset the maximum value, making it ideal as a loudness meter. It can be used for events such as loud voice contests in neighborhoods or within companies. 【Features】 ■ Easy to operate ■ Easy-to-read large digital display

• Vibration and Sound Level Meter

With a durable structure and robust IP66 protective casing, along with a newly developed shock-absorbing handle and receiver holder, it provides reliable performance even in harsh worksite environments. Additionally, by using it with an automatic tripod, complete one-person operation can be achieved.

• Surveying

A rigid loading plate with a diameter of 30 cm is installed on the target ground surface, and the load is applied incrementally. From the loading weight at that time and the amount of ground settlement, the ultimate bearing capacity of the ground and the ground reaction coefficient can be determined.

• Geological Survey

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

This is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

This is an automatic level that adapts to various scenes, from surveying to civil engineering and construction.

• Surveying

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying

It is an automatic level that responds to various scenes, from surveying to civil engineering and construction.

• Surveying