ソーキ List of Products and Services

You can monitor the load from a distance, and it will be displayed on the control side via Wi-Fi wireless. 【Features】 ■ Load monitoring can be done from a distance of up to 700m. ■ The wireless system uses the latest technology of the IEEE 802.15.4 (2.4GHz) standard. ■ Error-free data transmission. Transmission within a range of 700m can be done without a wireless license. ■ Load units such as Ton, Kg, and kN can be switched and displayed.

• Other measuring instruments

When a change in the electric field caused by discharge from a thundercloud is detected, a buzzer sounds, and the time it takes for the thunder to be heard is converted into propagation distance, displaying the distance to the lightning strike point digitally. ■Discharge detection range: approximately 20 km (detection sensitivity is 2 ranges)

• Hydrological survey

Dissolved oxygen is essential for the self-purification of water and for aquatic organisms, and it is used as one of the indicators of water quality. 【Features】 ■ Salt conversion display can be switched ■ Energy-saving design, rechargeable batteries can also be used

• Water quality/pH measuring device

In addition to welding current, welding voltage, and welding speed, inter-pass temperature and welding heat input can be easily recorded automatically.

• Other measuring instruments

It achieves high-precision illuminance measurement with excellent oblique incident light characteristics.

• Other measuring instruments

Since it is a wireless structure, there is no risk of the cord getting tangled during boom extension and retraction. Depending on the application, it is also possible to switch the detection distance. 【Features】 ■ The sensor and the control box on the driver's side can be attached and detached with magnets. ■ The control box at the tip of the boom should be securely fixed with bolts or similar. ■ The volume can be adjusted according to the working environment. (Maximum 95dB) ■ It is possible to switch the detection distance according to the application. (3m, 2m, 1m) ■ Dustproof and drip-proof structure.

• others

It is possible to measure concentrations in dangerous places without human presence, making it ideal for measuring hydrogen sulfide in sewage and wastewater facilities. Additionally, the large and highly visible LCD screen mounted on the device allows for easy confirmation of the OdaLog's settings and status at a glance. The main functions of the device (e.g., gas values, temperature, internal memory usage, log mode and log interval, battery level) can all be displayed on the LCD screen. ■ Designed to withstand harsh environments such as drainage Proven robust design with double O-rings ■ Long battery life Operates for up to approximately 12 months on a single battery ■ Easy operation Simple operation with the included dedicated software (OdaStat-G). Memory capacity increased to 42,000 data points ■ Capable of monitoring gas concentration changes over time ■ Equipped with a large, easy-to-read alphanumeric display

• Environmental Survey

It is convenient for searching for buried steel plates and the like. Since it includes antennas with diameters of 40 cm and 24 cm, you can choose which one to use depending on the depth. 【Features】 ■ Sensitivity settings can be adjusted in two stages (Low/High) ■ Automatically calibrates according to the geological conditions. ■ Using the 40 cm diameter antenna, it can detect up to a maximum depth of 1.4 m.

• Non-destructive testing

It is possible to detect the connection and cut points of buried cables. You can select a measurement method that suits your usage from three measurement methods (direct method, indirect method, clamp method) and perform measurements. 【Features】 ■ High-precision exploration of the burial location of buried cables (control lines, power lines, telephone lines, etc.) up to a total length of 2,000m and a depth of 4m from the surface. ■ Capable of measuring a wide range from unpowered lines to live high-voltage lines. ■ Detection of the burial locations of metal pipes, high-voltage cables, and refrigerant pipes is possible. ■ Compact and lightweight, making it easy to handle. ■ Both the transmitter and receiver are equipped with an auto power-off function, ensuring peace of mind against forgetting to turn off the switch.

• Non-destructive testing

By using the wedge-shaped crosshairs and micrometer within the telescope's field of view, height differences can be measured to an accuracy of 0.1 mm.

• Surveying

As a dust measurement sensor, the system equipped with the LD-5R not only displays dust concentration but also allows for the measurement data to be saved to a USB memory stick. *To ensure accurate measurements, it is necessary to measure the appropriate K value. ■ The lightweight display board (approximately 2.2 kg) allows for the notification of measurement values to the surroundings. ■ By inserting a USB memory stick, it is possible to save the measurement results.

• Environmental Survey

The angle information on the protractor is optically magnified and read to measure the angle.

• Surveying

The angle information of the protractor is optically magnified and read, and the angle is measured.

• Surveying

The analysis function allows for simultaneous measurement of octave and 1/3 octave band real-time analysis. It features an easy-to-read backlit TFT color LCD and key operation panel. 【Features】 ■ Simultaneous measurement of octave and 1/3 octave band real-time analysis ■ Easy-to-read TFT color LCD and key operation panel with backlight ■ Measurement results can be directly recorded as text files on a memory card (CF card) ■ USB is used for communication with computers (storage compatible) ■ Comparator output is an open collector, allowing control of external devices ■ Equipped with a trigger input terminal that can also be controlled by external devices

• Vibration and Sound Level Meter

Simultaneous calls among multiple parties are possible. If you only need to monitor the call content, you can freely add additional handsets. *This product is for the rental of the main unit only. The base station is not included. *Handsets are not included in the set. The required number of units will be prepared for rental separately. 【Features】 ■ All handsets have calling rights, and up to 7 parties can join a conference call on available channels using an automatic line selection method. Adding a base station increases the lines by one. ■ The traditional fixed channel method is also available. It allows for simultaneous calls among up to 8 parties, suitable for large-scale use. Of course, if you only need to monitor the call content, you can freely add handsets. ■ Wide and clear call area. Communication can be conveyed clearly. The main unit with an integrated antenna eliminates cable transmission loss between antennas. Various issues such as connection failures and disconnections are improved. Combined with independently transmitting and receiving antennas that ensure efficient communication, stable calls can be made over a wide area.

• others

Simultaneous calls among multiple parties are possible. If you only need to monitor the call content, additional handsets can be freely added. *Note: Handsets are not included in the set. The required number of units will be provided separately for rental. 【Features】 ■ All handsets have calling rights, and up to 7 parties can join a conference call on available channels using an automatic line selection method. Adding a base station increases the lines by one. ■ The traditional fixed channel method is also available. By adding a base station, simultaneous calls among up to 9 parties can be supported for large-scale needs. Of course, if you only need to monitor the call content, handsets can be freely added. ■ Wide and clear call area. Communication can be conveyed clearly. The parent unit with an integrated antenna eliminates cable transmission loss between antennas. Various issues such as connection failures and disconnections are also improved. Coupled with independently transmitting and receiving antennas that offer high communication efficiency, stable calls can be made over a wide area.

• others

It is a large display that can be connected to an anemometer and other devices.

• Anemometer

Additional features: Cassette/CD

• others

■Additional feature: cassette

• others

■Additional feature: cassette

• others

The display and data recording unit has been separated, resulting in a noise and vibration display data recording device that can be mounted on a single pipe. (Note: the single pipe is not included.) It can digitally display data from the sound level meter and vibration meter, and automatically record calculation results every 10 minutes to a USB memory. 【Features】 ■ Unmanned measurement function with a timer ■ Automatic recording of calculation results from the sound level meter and vibration meter to USB memory every 10 minutes ■ All-weather type, suitable for outdoor installation ■ Automatic on/off function for the display ■ Instantaneous values of noise and vibration levels displayed on a large digital display every second ■ Alarm light flashes when values exceed specified limits

• Vibration and Sound Level Meter

You can easily perform automatic measurements by setting the start and end times for display and data writing. Additionally, you can automatically record calculation results every 10 minutes on a memory card. 【Features】 ■ Unmanned measurement function using a timer ■ Automatic recording of calculation results every 10 minutes on memory cards for sound level meters and vibration meters (24 hours × 30 hours) ■ Calculation results based on 0.1-second sampling ■ Automatic correction function using a GPS clock ■ All-weather type, suitable for outdoor installation ■ Automatic display on/off function (automatically turns off based on timer function) ■ Manual OFF function for display and rotating light ■ Selection setting function for rotating light operation time (5/10 seconds) ■ Instantaneous values of noise and vibration levels displayed every second on a large digital display ■ Easy daily report printing of 10′/1-hour values using data management software ■ Rotating light activates when values exceed the specified limit

• Vibration and Sound Level Meter

■Display: Hourly rainfall, 24-hour rainfall

• Hydrological survey

This is a precision sound level meter equipped with an auto store function as standard, capable of continuous measurement using a timer function or external power supply, designed with ease of use in mind. 【Features】 - Equipped with an auto store function as standard, capable of continuous measurement using a timer function or external power supply. - Large color LCD screen A 3-inch touch panel LCD screen that is easy to see indoors, outdoors, and in dark places with high quality. - No manual required Menu display in Japanese. Simple operation following the screen prompts. - Compatible with rechargeable batteries Supports rechargeable batteries, considering the environment. Achieves 16 hours of continuous measurement (when using Eneloop Pro or alkaline batteries). - Continuous measurement for one month Suitable for long-term measurements such as environmental monitoring (when using an AC adapter).

• Vibration and Sound Level Meter

By utilizing trace radioactive isotopes, it is possible to measure soil density, moisture content, and other parameters with high precision, allowing for the rapid testing of wet density and moisture ratio, which are essential for quality control tests of embankments.

• Geological Survey

We will measure the coating thickness on non-ferrous metals. The measurement range can reach up to 2.5mm.

• Structural Survey

It measures the coating thickness on non-ferrous metals. The measurement range can go up to 5mm and can measure thicker materials.

• Structural Survey

The material being measured can be measured up to a maximum of 250°C for materials such as iron, steel, aluminum and other metals, hard plastics, glass, and ceramics. 【Features】 ■ Measurement up to a maximum of 250°C ■ Compact and lightweight, powered by a single AA alkaline battery for long-term use in the field. ■ Backlight (ON/OFF), sound speed adjustment switch (up/down), and unit conversion (inch/mm) can be operated with a single button.

• Structural Survey

The vehicle detection system is suitable for detecting slow-moving objects (such as pedestrians and slow-moving vehicles) and can alert nearby vehicles and pedestrians with a warning light when a vehicle is approaching from blind spots, such as temporary enclosures or construction sites. The traffic vehicle detection system "Karkuru" is an autonomous sensor primarily composed of infrared sensing sensors, which can notify with a warning light by detecting the infrared rays emitted (or reflected) by vehicles.

• others

Insert the transmission code through the nearest box opening of the pipe, push it until it hits the obstruction to send a transmission sound, and it will become a device that accurately locates that position using headphones. It can detect the positions of unknown installations such as electrical conduits, water pipes, and gas pipes, as well as the locations of obstructions that have formed inside the pipes, without destroying the building. 【Features】 ■ Can detect the position of obstructions inside the pipe from the outside without destroying the building ■ Can accurately locate the position of obstructions

• Non-destructive testing

This is a pH measuring device that can be inserted into the soil for applications such as agriculture and gardening. It comes with standard solutions of pH 4.0 and pH 7.0, allowing for accurate measurements.

• Geological Survey

By determining the cone penetration resistance values for soft ground such as clay and organic soil, it is possible to understand the trafficability of construction machinery and the soil layer composition of the ground. Applicable standard: JGS 1431 (Portable Cone Penetration Test Method - Standards (Draft) of the Japanese Geotechnical Society)

• Geological Survey

A simple field density measuring device compliant with Japan Highway Public Corporation standards, applicable to a wide range of soil types. * S-209b for coarse-grained soil, hole type φ250mm, maximum particle size of 100mm or less.

• Geological Survey

A simple field density measuring device compliant with Japan Highway Public Corporation standards, applicable to a wide range of soil types. * S-209a for fine-grained soil, hole type φ150mm, maximum particle size of 50mm or less.

• Geological Survey

You can determine the true north direction necessary for creating shadow diagrams, solar time diagrams, and survey maps from the shadows cast by sunlight.

• Surveying

This is a relative concentration meter using a light scattering method that introduces suspended particulate matter into the chamber at a constant suction flow rate from a built-in pump for measurement. 【Features】 ■ Instantaneous values (bar graph) and cumulative count values can be checked on the same screen. ■ The concentration value during measurement can be checked on the screen (trend graph). ■ The degree of filter contamination can be visually confirmed. ■ Simple logging function allows for easy recording of measurement values during operation.

• Environmental Survey

■Built-in program ■Check of sighting line ■Function check of cone compensator ■First-class leveling survey ■Second-class leveling survey ■Third and fourth-class leveling survey ■Record data confirmation ■Output of hand-written data

• Surveying

It is a level that uses a built-in highly sensitive tubular bubble tube to determine the horizontal position of the machine.

• Surveying

The tilt monitoring system has been transformed from traditional high precision, high functionality, and high cost to "simple," "easy," and "affordable." It enables easy on-site implementation and meets customer demands for use in various settings, such as managing aging infrastructure, ensuring safety during construction work, and monitoring the impact on existing structures due to nearby construction activities.

• Hydrological survey

It is a level that uses a built-in highly sensitive tubular bubble tube to determine the machine's horizontal alignment.

• Surveying

It is a level that uses a built-in highly sensitive tubular bubble tube to determine the horizontal position of the machine.

• Surveying

From the values read, you can calculate the dew point temperature, the difference between the surface temperature and the dew point temperature, wet bulb temperature, dry bulb temperature, and specific humidity. 【Features】 ■ With a built-in magnet, the gauge can be fixed to the base during data recording. ■ Can store up to 999 batches and 25,000 readings. ■ Easy-to-use menu with language selection available. ■ When limit values are set, it alerts with sound and a lamp if those values are exceeded.

• Hydrological survey

When constructing embankments and subgrades for roads, optimal moisture content and compaction degree are used in the design and management of compaction. They are also utilized as a means to produce soil specimens for CBR tests, unconfined compressive tests, and others.

• Geological Survey

From civil engineering and construction work to interior design and finishing work, you can easily level everything by yourself.

• Surveying

From civil engineering and construction work to interior design and finishing work, leveling can be easily done by one person.

• Surveying