相互ポンプ製作所 List of Products and Services

This product is a non-clogging sewage pump with a cutter. It is of the BS-C type (mechanical seal type), with an impeller made of FC20 and a cutter plate made of SUS630. In addition, we also offer a detachable device type for BS-C type raw sewage crushing and a submersible centrifugal cutter pump. [Model] ■ BS-C type (mechanical seal type) - Impeller: FC20 - Cutter plate: SUS630 ■ BS-2C type, BS-3C - Impeller: FCD50, with a super-hard alloy coating on the leading edge - Cutter plate: SUS630, with a super-hard alloy coating on the top surface *For more details, please refer to the PDF materials or feel free to contact us.

• pump

This product is well-known as a sewage pump and is an excellent centrifugal pump for the passage of sewage. It is a vertical type for outside the tank, with a small installation area, and daily maintenance and disassembly inspection can be easily performed. The shaft sealing section employs an oil bath type double mechanical seal, eliminating the need for sealing water and virtually preventing sewage leakage. 【Features】 ■ The discharge direction can be shifted 90 degrees to the left or right. ■ Vertical type for outside the tank, with a small installation area. ■ Daily maintenance and disassembly inspection can be easily performed. ■ Employs an oil bath type double mechanical seal. ■ No sealing water is required, and there is virtually no sewage leakage. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

This product is a submersible centrifugal pump for sludge treatment in wastewater treatment facilities such as sewage and sewage treatment plants, as well as for wastewater and waste discharge in apartment complexes, buildings, hospitals, and underground shopping areas. It features high efficiency and energy-saving capabilities, with a lineup of ND type fixed installation and NDL type detachable device models. It can also be used for wastewater discharge in various factories, including food factories. [Applications] - For sludge treatment in wastewater treatment facilities such as sewage and sewage treatment plants - For wastewater and waste discharge in apartment complexes, buildings, hospitals, and underground shopping areas - For wastewater discharge in various factories, including food factories *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The S-type sand pump is specially designed for the transportation of sand in water. It has received high praise for its ability to handle debris such as fibers and vinyl, and is designed based on a sewage centrifugal pump. It features a structure that minimizes clogging, making it suitable for transporting sand mixed with various debris (such as in sedimentation tanks at wastewater treatment plants), as well as soil and sand. 【Features】 ■ Adopts an impeller from a centrifugal pump with good debris handling performance ■ Equipped with high-chrome cast iron rings and plates ■ Uses a belly-type mechanical seal, with sliding parts made of SiC (silicon carbide) for excellent wear resistance and sliding properties *For more details, please refer to the PDF materials or feel free to contact us.

• pump

We offer the "Water Level Control Unit FRE Type," which allows for precise control of tank water levels using high-precision water level sensors and microcontroller-equipped controllers. In water supply systems, it prevents water quality deterioration due to stagnation, ensuring a constant supply of fresh water. 【Features】 ■ Easy setup ■ Easy installation ■ Multifunctional *For more details, please download the PDF or contact us.

• Automatic Control Equipment

The "Air Conditioning Linear Pump LPF Type" is a revolutionary pump that further develops the conventional air conditioning linear pump (LP Type) through self-powered hydraulic control, achieving high performance and functionality while prioritizing energy conservation. To meet the needs of energy-efficient building construction, it features an innovative mechanism and excellent control characteristics. Additionally, it does not use equipment that generates noise or harmonics in its instrumentation components, eliminating the need for countermeasures and preventing any interference with computers or power receiving equipment. 【Features】 ■ Achieves energy savings of 30-40% ■ Innovative control that combines self-powered hydraulics with open blade gap control ■ No need for noise or harmonic countermeasures ■ High reliability of control ■ A wide variety of control types *For more details, please download the PDF or contact us.

• pump
• Air compressors, blowers and pumps

The "Air Conditioning Linear Pump LPC Type" is a discharge pressure constant pump that incorporates our developed pilot valve into the conventional air conditioning linear pump, making it closer to a general-purpose pump. Since the pump itself has a discharge pressure constant control mechanism, electrical work on-site only requires wiring to the motor, just like a general-purpose pump. No other instrumentation work is necessary. 【Features】 ■ Discharge pressure constant control through self-hydraulic control ■ No instrumentation equipment required for discharge pressure constant control ■ Easy maintenance ■ No harmonics produced * For more details, please download the PDF or contact us.

• Air compressors, blowers and pumps
• pump

Our company offers the 'Linear Valve SSV Type', which is capable of strict primary pressure constant control, secondary pressure constant control, and differential pressure constant control, based on our extensive experience in self-powered hydraulic control over many years. The cylinder diameter of the pressure control unit is large, and in addition, the amplification effect of the pilot valve provides numerous excellent features. 【Features】 ■ High precision control ■ Stable control performance ■ Wide adjustment pressure range ■ Easy maintenance ■ Wide range of applications ■ Realization of constant flow operation for pumps *For more details, please download the PDF or contact us.

• Piping Equipment

We handle the "Sogo Submersible Aeration Device SND Type," which allows two pumps to be operated with one detachable device. The sewage pump and aeration pump, which were traditionally installed separately, are connected by a support arm, allowing both pumps to be smoothly raised and lowered with the operation of just one chain. As a result, not only is the construction cost reduced, but the effective use of floor space is greatly expanded, and maintenance and inspection can be done with half the effort for retrieval and reinstallation, providing various benefits. [Features] - Smooth attachment and detachment of two pumps with the raising and lowering of one chain - Reduction in construction costs - Expanded utilization of floor space *For more details, please download the PDF or contact us.

• Air compressors, blowers and pumps

The "Sogo Centruk" is a sewage pump created through a new concept and theory that combines the widely known principles of centrifugal pumps (centrifugal pumps) with the ideas of vortex flow pumps (torque flow pumps), integrating the advantages of each. The gap at the front of the impeller can be made approximately 100 to 200 times wider compared to ordinary open-type pumps, allowing for good passage of debris and a structure that is less prone to clogging. 【Features】 ■ Specially designed impeller ■ Clog-free structure ■ Stable performance ■ Smooth operation ■ Unique C&G cutting mechanism, etc. *For more details, please download the PDF or contact us.

• pump
• Water Treatment Plant

We offer the "Sougo Centork Mini Series," which is compact, lightweight, has a small installation footprint, and is very easy to handle. Despite its small size, it boasts excellent cutting performance. The simple C&G cutting mechanism makes it easy to operate. Additionally, the top-quality mechanical seal completely prevents water ingress into the motor. 【Features】 ■ Compact and lightweight ■ Completely clog-free ■ Unique cutting mechanism ■ Perfect motor protection *For more details, please download the PDF or contact us.

• pump

We handle the "Sogo High-Lift Turbine Pump Model SM-2P," which features a balance disk that allows for easy management due to the low pressure at the discharge side gland packing, despite the high lift. By performing impeller cutting (machining of the outer circumference of the impeller) according to customer specifications, we eliminate unnecessary pressure and promote energy savings. *This is a unique solution from our company. [Applications] ■ For building equipment ■ For general industrial use ■ For boiler feed water ■ For high-altitude water supply and lifting *For more details, please download the PDF or contact us.

• pump

Our company offers the "Super Linear Water Supply Device LSUP type," which performs self-hydraulic control (S・H・C Self Hydraulic Control) through the operation of a single pilot valve. This device possesses a remarkable ability to minimize pressure changes, even in applications with extremely rapid fluctuations in water usage. The efficiency of the linear pump is excellent, matching that of general-purpose pumps at maximum performance. Additionally, it features energy-saving capabilities that are nearly identical to those of inverter control systems. 【Features】 - Capable of handling extremely rapid flow changes - Minimal fluctuations in terminal pressure - Superior pump efficiency - Good energy savings - Low noise, etc. *For more details, please download the PDF or contact us.

• Water supply facilities

We offer the energy-saving constant pressure water supply unit "Super Simple Linear LSUW Type Water Supply Device," which achieves simplicity and high quality. By significantly reducing conventional linear pump instrumentation components (such as solenoid valves, linear control circuits, pressure transmitters, and pressure relief valves), we have realized low cost, low management fees, and low noise. The exquisite operation of the pilot valve creates a perfect hydraulic balance. 【Features】 ■ Aiming to reduce on-site construction costs, complete unitization is standard (including common piping, valves, pressure tanks, and electrical wiring). ■ The water contact parts are made of BC material, completely shutting out red water (including shut-off valves, check valves, and flow relays, all made of BC). ■ Simply turning the knob of the pilot valve allows for easy adjustment of discharge pressure. *For more details, please download the PDF or contact us.

• Water supply facilities

The "Sogo Drainage Pump Unit" is a product that includes a drainage pump, a small drainage tank, and a pump control panel as a set. The tank body is made of stainless steel with a thickness of 3mm, making it resistant to corrosion and ensuring a long lifespan. Additionally, it meets the standard seismic strength of 1.0G. Depending on the installation location, the external dimensions of the tank can be modified, as well as the size and position of the inlet and outlet, making it suitable for drainage from mini kitchens and staff restrooms, and recommended for renovations in station buildings and tenant buildings. It can also be used as a relay tank in areas where securing drainage slopes is difficult. 【Features】 - In addition to the standard type, it can flexibly accommodate changes in the dimensions of the drainage tank. - The 3mm thick stainless steel tank is resistant to corrosion and has a long lifespan. - The pump uses a detachable submersible pump, making it easy to remove and maintain. - For water flush toilets, it employs a well-regarded cutter-equipped centrifugal pump. *For more details, please refer to the PDF materials or feel free to contact us.

• pump
• Drainage material