ヘリオス List of Products and Services

This product is a powerful and compact inverter-driven small dual-axis crusher. It has been further enhanced as a dedicated machine for sewage sludge that handles river debris (general waste) flowing into the sewage system, accommodating the crushing of various target materials. The reverse cutter (reverse blade) equipped cutter enables smooth crushing of a wide range of materials, effectively crushing tangled waste not only during forward rotation but also during reverse rotation. 【Features】 ■ Water and dust-resistant design based on sewage sludge crusher ■ Customizable design to meet customer applications ■ Utilizes a common modular design specification for our crushers ■ Suitable for long-term use ■ Achieves powerful and stable crushing by leveraging inverter drive *For more details, please refer to the PDF document or feel free to contact us.

• Sewerage facilities
• Turbid water and muddy water treatment machines
• Water Treatment

This product is a compact dual-shaft crusher that achieves genuine crushing performance while being small and lightweight, with an adjustable crushing granularity. By providing a circulation damper at the discharge section of the crushing chamber, it enables multiple crushing cycles with the dual-shaft crusher, allowing for homogeneous crushing. Thanks to its unique circulation crushing method without screens, it minimizes clogging of crushed materials and provides smooth fine crushing. 【Features】 ■ Enables multiple crushing cycles by providing a circulation damper at the discharge section of the crushing chamber ■ Achieves homogeneous crushing ■ Adopts a unique circulation crushing method without screens ■ Minimizes clogging of crushed materials and achieves smooth fine crushing ■ Achieves genuine crushing performance while being small and lightweight *For more details, please refer to the PDF document or feel free to contact us.

• Sewerage facilities
• Turbid water and muddy water treatment machines
• Water Treatment

The "HNSC Series" is a compact single-shaft crusher that achieves genuine crushing performance while being small and lightweight. By utilizing a reciprocating crushing method with a single-shaft cutter rotor, it achieves homogeneous fine crushing, and its unique crushing method without screens minimizes clogging of the crushed material, providing smooth crushing. With 100V/200V power supply operation, it can be used for a wide range of applications, including used diapers, organic waste, discarded food, and general waste (soft materials). 【Features】 ■ Achieves genuine crushing performance while being small and lightweight ■ Enables a wide range of applications with 100V/200V power supply operation ■ Achieves homogeneous fine crushing through reciprocating crushing with a single-shaft cutter rotor ■ Minimizes clogging of crushed material, ensuring smooth crushing *For more details, please refer to the PDF document or feel free to contact us.

• Sewerage facilities
• Turbid water and muddy water treatment machines
• Water Treatment

Helios, as a specialized engineering manufacturer of pre-treatment crushing for waste incineration, responds to various challenges related to crushing processing and aims to enhance customer satisfaction. The "dispersal feeding device" disperses the concentrated dropping of waste through the oscillating motion of the dispersal plate, alleviating the load on the equipment. It is our original patented device, used in conjunction with our two-axis cantilever feeder. In addition, we handle various equipment such as foreign object removal devices, high-load and high-frequency torque limiters, feeding hoppers, and volumetric supply apron conveyors, among other peripheral equipment. 【Products Offered】 ■ Dispersal feeding device ■ Foreign object removal device ■ High-load and high-frequency torque limiter ■ Feeding hopper, volumetric supply apron conveyor, and other peripheral equipment *For more details, please feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor

The "press-type dewatering machine" is a hydraulic press-type horizontal dewatering machine developed in response to the need to dewater pulp residue from paper manufacturing processes to a moisture content that allows for self-ignition. Dewatering to a moisture content of 50% (a self-ignitable state) has been achieved through high hydraulic pressure. As a result of dewatering, the raw material can be incinerated or converted into fuel. The weight is reduced to 2/3 to 1/2, significantly lowering processing costs. 【Features】 ■ High power ■ Suitable for dewatering pulp residue and organic matter discharged from paper companies ■ Significant reduction in processing costs ■ Continuous automatic operation of the press dewatering process through level detection after input ■ Designed for durability and longevity, assuming 24-hour operation for 300 days *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Prime movers, torque converters, hydraulic equipment, generators

The "Push-Cutting Type Cutting Machine (Hydraulic)" is a bulky waste cutting machine with a structure that allows for high durability of the blades and easy replacement. It cuts materials that were difficult to process with shear-type cutting machines or dual-shaft crushers, such as large ropes and wire-reinforced conveyor belts, using the sharp blades of the push-cutting type. Cutting processing of materials that could not be handled before, such as large ropes, FRP products, and fish nets, has now become possible. 【Features】 ■ Powerful cutting with the push-cutting type ■ Suitable for strong cutting processing of FRP products, fish nets, etc. ■ Blades have a high durability and an easy-to-replace structure ■ Automatically cuts sequentially with a powerful force (approximately 150 tons) at lengths of 50mm to 400mm after inputting one cycle ■ Facilitates metal recovery and incineration processing, leading to reduced disposal costs and enhanced recycling utilization *For more details, please refer to the PDF document or feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor

The "Shear-Type Cutting Machine (Hydraulic)" is a bulky waste cutting machine that achieves cost reduction through standardized design. By leveraging the advantages of hydraulic drive, it allows for the installation of a wing-type compression device in the input case, and enables arbitrary settings for cutting speed, cutting force, and cutting dimensions through vertical blade settings, thus meeting a wide range of needs. 【Features】 ■ Traditional hydraulic method allows for cutting capacity to be set up to 200 tons ■ Cost reduction achieved through design standardization ■ Rich variety of options *For more details, please refer to the PDF materials or feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor

The "2-axis screw-type feeding machine" is equipment that transports waste in front of fluidized bed furnaces, pyrolysis furnaces, and gasification furnaces. Due to its proximity to the incinerator, the screw of the feeding machine, which is difficult to maintain, is coated with materials that have excellent wear resistance to enhance durability. This feeding machine, which boasts outstanding quantitative supply performance, is made possible by our company, which has continually sought technologies to improve combustion in incinerators through shredders. 【Features】 ■ Excellent durability screw conveyor ■ Axial movement screw conveyor (only compatible with double-supported screw type) ■ Equipped with anti-compaction device ■ Shredder (only compatible with single-supported screw type) *For more details, please refer to the PDF materials or feel free to contact us.

• Material handling systems and equipment

The "60-type Helios Crusher" is a compact crushing machine developed for the pre-treatment of sewage sludge at wastewater treatment plants before incineration. An integrated cutter has been developed that is suitable for crushing sewage sludge and plastics, which exceed the category of general household waste. It is capable of fine crushing with widths of 15mm, 25mm, and 40mm. Additionally, it features a design that takes waterproofing and dustproofing into consideration, making it applicable for a wide range of materials, including kitchen waste, plastics, and clinker. 【Features】 - Developed an integrated cutter suitable for crushing sewage sludge and plastics - Capable of fine crushing with widths of 15mm, 25mm, and 40mm - Designed with waterproof and dustproof considerations - Easy and quick maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Sewerage facilities
• Turbid water and muddy water treatment machines
• Water Treatment

The "70-Type Helios Crusher" is an industrial waste and bulky waste crusher developed for the stable crushing and processing of industrial waste such as factory waste and construction debris. A newly developed high-performance cutter with a special overlay coating achieves high crushing power and high reliability that can withstand continuous long-hour operation. The main applications are factory waste, construction debris, and bulky waste, but it is increasingly being used as a quantitative supply device for waste incinerators, utilizing its high crushing performance to supply urban waste stored in the input hopper. 【Features】 ■ High-performance overlay cutter ■ High performance that meets diverse needs ■ Low speed, high torque, low noise, high reliability *For more details, please refer to the PDF document or feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor

The "30-Type Helios Crusher" is a compactly designed urban waste crusher. As the supply waste for the fluidized bed furnace no longer requires the fine granularity it did initially, it has become possible to create a slim and smart crusher through significant simplification. With the diversification of waste, various variations in crushing are now required, and we have responded to that need by providing a wide range of options and continuous improvements. In addition, we also handle the "Cutter Shaft Side-Removal Type Crusher." 【Features】 ■ Achieves 20% to 30% space savings compared to conventional models ■ Realizes low cost through thorough rational design ■ Selectable from chip exchange type cutters, build-up type cutters, and high-frequency hardened cutters according to crushing granularity and operating conditions ■ Various optional features can be selected and added *For more details, please refer to the PDF materials or feel free to contact us.

• Garbage disposal, central dust collection, laundry, compressor

At Helios Co., Ltd., we introduce a series of low-speed, high-torque crushers as a specialized manufacturer of crushing machines. You can choose from a wide range of products, including crushers adopted by most fluidized bed furnace manufacturers, industrial waste and bulky waste crushers, and small crushers for sewage sludge with waterproof and dustproof designs. 【Product Lineup】 ■ Small dual-shaft crusher ■ Particle size adjustment crusher ■ Industrial waste and bulky waste crusher ■ Small single-shaft crusher ■ Bulky waste cutting machine ■ Dust feeding machine Please let us know about the materials to be crushed, processing volume, and any challenges your company is considering. We will also provide information on equipment selection, customization, and optional products. Feel free to consult us first.

• Garbage disposal, central dust collection, laundry, compressor