島田商会 List of Products and Services

The "MP-45" is a mouthpiece specifically designed for the semiconductor sensor type alcohol checker (ACT-60) and the fuel cell sensor type alcohol checker (ACT-200). It comes individually packaged for hygiene, with 10 pieces included. To use, attach the dedicated mouthpiece and blow into it. By changing the mouthpiece, it can be used hygienically. 【Features】 ■ 10 mouthpieces included ■ Individually packaged for hygiene *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

Starting from October 1, 2022, the use of alcohol checkers at designated safe driving management offices has been mandated by the Road Traffic Act. If the alcohol concentration is 0.15 or higher, it will be subject to fines and point deductions for violations of the Road Traffic Act. The "ACT-200" is an alcohol checker equipped with a high-precision, high-functionality fuel cell sensor that has good gas selectivity and reacts almost exclusively to ethanol, allowing for highly accurate measurements. Additionally, it has good reproducibility and is very resistant to atmospheric pressure and condensation, making it less susceptible to environmental influences. 【Features】 ■ Equipped with a high-precision, high-functionality fuel cell sensor with good gas selectivity ■ Almost exclusively reacts to ethanol, enabling highly accurate measurements ■ Good reproducibility ■ Very resistant to atmospheric pressure and condensation, making it less affected by environmental factors ■ Can be used hygienically by changing the mouthpiece *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Other measuring instruments

The ACT-60 is a semiconductor sensor-type alcohol checker that can measure with a quick response time of about 5 seconds. It features a stylish design that fits comfortably in your hand and comes with 5 included mouthpieces. Lightweight and easy to carry, it is ideal for inspections during business trips or outings. Additionally, starting from October 1, 2022, the use of alcohol checkers has been mandated by the Road Traffic Act at offices designated for safe driving management. If the alcohol concentration is 0.15 mg/L or higher, it will be subject to fines and points deductions as a violation of the Road Traffic Act. 【Features】 ■ Quick response time of about 5 seconds for measurement ■ Lightweight and easy to carry ■ Stylish design that fits comfortably in your hand ■ Comes with 5 included mouthpieces ■ Can be used hygienically by changing the mouthpiece *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Other measuring instruments

The "CO2 Pipi Ventilation-kun" can visualize CO2 concentration with colors and numbers. When it reaches 1500ppm, a warning sound will beep, and pressing the button on the front will silence the alarm. It is equipped with a high-performance sensor made in Germany, with a CO2 concentration measurement range of 0ppm to 5,000ppm (measurement sensitivity of 1ppm). 【Features】 ■ Alerts you with a beep when indoor levels reach 1,500ppm ■ Visualizes CO2 concentration with colors and numbers ■ Equipped with a high-performance sensor made in Germany *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

"Portuglass" is a reactive silicate-based surface impregnation material that reduces cracking due to freeze-thaw cycles to prevent water intrusion. It fills cracks and voids in concrete, densifies the concrete, and exhibits effects such as waterproofing, rust prevention, carbonation suppression, and strength enhancement, thereby extending the lifespan of concrete. Additionally, being inorganic, there is no concern about degradation due to ultraviolet rays. [Features] - Improved waterproof performance - Suppression of carbonation - Prevention of freeze damage - Enhanced strength and durability - Weather resistance *For more details, please refer to the PDF document or feel free to contact us.

• others

"Portuglass II" is a silicate-based surface impregnation material that is minimally affected by weather conditions and can be applied in a short period of time. By optimizing and increasing the concentration of the main component, silicate, we have achieved a higher modification effect. Additionally, by reducing the amount of application and the construction process, we have made it possible to shorten the construction period. [Features] ■ Waterproofing ■ Carbonation inhibition ■ Salt damage inhibition ■ Abrasion resistance ■ Weather resistance *For more details, please refer to the PDF document or feel free to contact us.

• others

"Portuglass PLUS" is a silicate-based surface impregnation material that allows for the confirmation of application areas, which has been difficult until now. The color of the applied surface will fade, returning to the original concrete color after a few days to a few weeks. Since natural materials are used for coloring, there is no environmental impact. 【Features】 ■ Enables confirmation of application areas, which has been difficult until now ■ Uses natural materials for coloring ■ No environmental impact ■ Appearance: Dark green to dark brown ■ Number of applications: 1 to 2 times *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is an acrylic partition suitable for hospitals, banks, office reception areas, around office desks, and negotiation booths. There is a 10mm gap, allowing for the exchange of documents even without a window. It is a stand-type, so it can be easily installed without any construction. We also offer a foldable custom-made product, the "Acrylic Partition (for desks)." 【Features】 ■ Easy installation ■ Available in various sizes ■ Comes with a dedicated stand ■ Made in Japan ■ Custom sizes can also be accommodated *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

At Shimada Shokai Co., Ltd., we handle the surface impregnation material 'Mortar Strength Guard' from Aura C.E. Co., Ltd. This newly developed product is designed to extend the lifespan of existing sprayed structures by filling cracks and voids in sprayed mortar, enhancing its strength and exhibiting water-stopping and carbonation suppression effects. Additionally, the application area is temporarily colored, allowing for reliable confirmation of the finished work. 【Features】 ■ Improved water-stopping performance ■ Suppression of carbonation ■ Enhanced strength and durability ■ Excellent weather resistance ■ Possible extension of lifespan with short construction time *For more details, please download the PDF or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material