伊藤製作所 List of Products and Services

The "Single Pipe Hanger" is a convenient product for organizing, storing, and transporting single pipes. It is made of sturdy angle (L50×50×4). We offer two types: "red painted" and "hot-dip galvanized" finishes. Additionally, we accept custom sizes, so please feel free to consult with us. 【Features】 ■ Convenient for organizing, storing, and transporting single pipes ■ Made of sturdy angle (L50×50×4) ■ Available in affordable painted versions and highly durable hot-dip galvanized versions ■ Custom sizes are also available *For more details, please refer to the PDF document or feel free to contact us.

• others

Box pallets can be lifted with cranes or unic cranes. Available in two types: effective depth of 690mm and 350mm. Finished with durable hot-dip galvanized coating. Stable stacking is possible both when loaded and when folded, and the lift forks can easily enter. We also offer models with polyurethane casters that do not leave marks on the floor. *For more details, please refer to the PDF materials or feel free to contact us.

• Box Pallet

The "Ring Clamp II" can be installed on φ42.7/48.6 single pipes and frame/one-sided scaffolding, and is used as a hook for the main safety line, fall arrest equipment (safety harness), life blocks, chain blocks, pulleys, and other hanging hardware for single pipes. The breaking load is 1,850 kg. Please tighten the clamp nut to 34 N·m (350 kgf·cm). [Usage Instructions] ■ One-sided scaffolding + main safety line ■ Single pipe + life block ■ Single pipe + fall arrest equipment (safety harness) *For more details, please refer to the PDF document or feel free to contact us.

• Hook

The "Ring Clamp" can be attached to φ42.7/48.6 single pipes and framework/one-sided scaffolding, and is used as a hook for anchoring safety lines, fall arrest devices (safety belts), life blocks, chain blocks, pulleys, and other hanging equipment for single pipes. It can be used in combinations such as "one-sided scaffolding + safety line," "single pipe + life block," and "single pipe + fall arrest device (safety belt)." 【Usage Methods】 ■ One-sided scaffolding + safety line ■ Single pipe + life block ■ Single pipe + fall arrest device (safety belt) *For more details, please refer to the PDF document or feel free to contact us.

• Hook

The "Life Block with Absorber" is a fall prevention device that is convenient for high-altitude work where there is no place to hook the safety harness or where the lifeline cannot be used. The coiled shock absorber absorbs the impact of a fall. It supports a maximum weight of 130 kg and can also be used to prevent equipment from falling. It is available in 8 types, ranging from 5m to 30m. 【Features】 ■ The wire rope stops with a short fall distance even if the worker falls. ■ Lightweight and rust-resistant fiberglass reinforced resin body. ■ Hooks made of stainless steel wire and aluminum alloy that are resistant to rust and highly reliable. ■ Stainless steel spring with high fatigue resistance and rust resistance. ■ Can also be used to prevent equipment from falling. *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables
• Hook

At Ito Manufacturing Co., Ltd., we offer a wide range of connecting hooks, including "carabiners," which are used in various fields from rescue and industrial applications to mountaineering, sports, and leisure. Additionally, we have products such as the "Rigging Plate," which secures multiple anchor points without interference between carabiners, and the "Rescue Pulley" designed for the Tokyo Fire Department. 【Features of Carabiners】 ■ "Iron" is nickel-chrome plated, and "Stainless" is SUS304 barrel polished ■ Superior toughness and wear resistance compared to aluminum alloy ■ A rich variety of shapes including O-type, D-type, Super 10, and Rescue ■ Usable in a wide range of fields from rescue and industrial applications to mountaineering, sports, and leisure *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Life Block" is a fall prevention device that ensures the safety of workers at job sites where there is a risk of falling. Even if a worker falls, the wire rope stops them at a short distance. It is suitable for construction, bridges, civil engineering, shipbuilding, towers, manholes, and other types of work. 【Features】 - Lightweight and rust-resistant fiberglass reinforced resin body - Strong against impact, with a low likelihood of internal mechanism malfunction - High fatigue resistance and rust-resistant stainless steel spring - Uses rust-resistant, reliable φ4.76mm aircraft-grade stainless steel wire and aluminum alloy hooks *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Safety and consumables

The "Net Clamp" is a compact fall prevention device designed for use in installing safety nets attached to steel frames. It is a forged one-piece construction, making it sturdy without any "welding" or "crimping." 【Specifications】 ■ Model: NTC ■ Main Material: SC Material ■ Main Finish: Chromate Plating ■ Bolt Material: Chrome Molybdenum Steel ■ Weight: 630g ■ Carton Quantity: 30 *For more details, please refer to the PDF document or feel free to contact us.

• others
• Safety and consumables

"Jack & Base" is construction equipment used for setting up scaffolding. The "Tilt" feature allows the base to tilt along the slope of roofs and other surfaces, enabling the scaffolding to be installed vertically. Additionally, the base is thoroughly coated with rubber to protect the installation surface (roof material) and prevent slipping. 【Product Lineup】 ■ Tilt Jack (Jack base for sloped surfaces) ■ Tilt Base (Single pipe base for sloped surfaces) ■ Hollow Tilt Jack (Jack base for sloped surfaces) ■ Jack Base *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials
• others

"Caster Jack & Caster" is construction equipment used for setting up mobile scaffolding. It comes with brakes. 【Lineup】 ■ Caster Jack ・ JC835 ・ JC635 ・ JC428 ■ Caster ・ SC635 "JC835," "JC635," and "SC635" are for φ42.7/φ48.6 pipes, while "JC428" is for φ34 pipes. The bolts for "JC835" and "JC635" have grooves. *For more details, please refer to the PDF document or feel free to contact us.

• Scaffolding and Support Materials
• others

"Free Step" is a temporary staircase that can be used not only at construction sites but also for various events and large machinery. The full rotation type II and full rotation type can be mixed depending on the angle (every 30°). Please install at equal intervals with heights ranging from 200 to 270mm. 【Features】 ■ The angle can be adjusted to fit the site (full rotation type II is every 15°, full rotation type / four-step type is every 10°) ■ Easy to assemble and repair as it can be attached and detached in the middle of the staircase ■ Does not take up space for storage and transportation *For more details, please refer to the PDF materials or feel free to contact us.

• Temporary Construction Materials
• others

At Ito Manufacturing Co., Ltd., we offer a variety of hangers suited for different purposes, including the convenient "Single Pipe Hanger" for organizing, storing, and transporting single pipes, as well as the "Support Hanger" for the storage of pipe supports. *For more details, please refer to the PDF document or feel free to contact us.*

• others

The "Basket-type Pallet & Hoisting Basket-type Pallet" is construction equipment that can be used for the storage and transportation of products, parts, and materials. In addition to the standard type, we offer a wide range of options including those with casters, hoisting types, and hoisting types with casters. Sizes available include S-type and L-type, as well as B-type, which is suitable for storing bariweights. 【Features】 ■ Folded pallets can be stacked and stored in a stable condition ■ Forks of lifts can easily enter ■ Hoisting types can also be used with cranes ■ Durable hot-dip galvanized finish ■ Custom sizes are also available *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Aluminum Pole" is a telescopic flagpole for temporary use. It features an easy-to-handle three-stage telescopic design, extending up to 6 meters. It can be easily set up by one person. Please use existing single pipes such as steel pipe stakes or temporary enclosures for installation. It is widely used not only at construction sites but also at various events. 【Features】 ■ Easy-to-handle three-stage telescopic design ■ Can be easily set up by one person ■ The pole is made of aluminum alloy, and the cap and cleat are made of SUS304 *For more details, please refer to the PDF document or feel free to contact us.

• Temporary Construction Materials
• Safety Supplies

The "Rope Stick" is a post that is driven into the ground to support ropes or net fences. The "Net Fence" is a simple fence that can be used by threading it through rope sticks or single pipes. It is suitable for security management at construction sites as well as various events. 【Features of the Net Fence】 - Made of lightweight and weather-resistant polyethylene - Easy to install simply by threading *For more details, please refer to the PDF document or feel free to contact us.

• Safety Supplies

"TAF-GUARD" is a support leg for barricades made of single pipes. Please use it in combination with single pipes, clamps, etc., as a barricade for road construction and manhole work. "BARI-WEIGHT" is a weight for φ48.6 single pipe barricades. Please fill it with water up to the 10kg line. It is suitable for safety management not only at construction sites but also for various events. 【Features of BARI-WEIGHT】 ■ Water can be added and drained from a single inlet ■ Designed for easy placement on single pipes ■ Stable stacking is possible during storage and transportation with four protrusions ■ Comes with a belt line for convenient bundling with PP bands ■ Applying optional reflective stickers enhances visibility at night *For more details, please refer to the PDF document or feel free to contact us.

• Safety Supplies

The "Sign Holder Series" is a fixture for securing construction signs to guardrails or guard cables. We also offer a type that can be fixed to curbs. The "Sign Holder" and "Sign Holder with Hot-Dip Galvanizing" for posts can be installed on curved posts as well. The "Curb Sign Holder" securely grips the curb without damaging it, thanks to the inner rubber pad. Additionally, it allows for width adjustment to fit the curb. 【Features of the Sign Holder】 ■ Effectively utilizes the shoulder of the road ■ Does not interfere with cleaning or snow removal operations ■ Can be installed on curved posts (for posts) ■ Easy installation by simply turning the turnbuckle while clamping the beam (for beams) *For more details, please refer to the PDF document or feel free to contact us.

• Safety Supplies
• others