株式会社フォービル List of Products and Services

In the solar power generation industry, safety and work efficiency are required for the installation of mounting structures. Particularly, depending on the terrain and ground conditions of the installation site, transporting and installing the supports can be labor-intensive. Additionally, the strength to withstand strong winds and snow accumulation is also important. Our aluminum temporary support, "Alpa," achieves high strength while being lightweight, thereby streamlining the installation work of solar power generation mounting structures. 【Usage Scenarios】 - Installation of solar power generation mounting structures - Installation of mounting structures on slopes or weak ground - Installation of mounting structures in areas with strong winds or heavy snowfall 【Benefits of Introduction】 - Improved efficiency in transportation and installation work due to lightweight design - Enhanced safety due to high strength - Cost reduction through long-term use as it is resistant to rust

• Temporary Construction Materials

In forestry operations, safety and work efficiency are essential when installing or moving work platforms. Especially in mountainous areas, lightweight and portable materials are crucial. Traditional supports are heavy and cumbersome to transport and install, which has been a challenge. Our aluminum temporary support, "Alpa," achieves high strength while being lightweight, making the installation of work platforms easier. 【Usage Scenarios】 - As supports for work platforms - Transportation of materials - Temporary structures in forestry sites 【Benefits of Implementation】 - Improved work efficiency - Enhanced safety - Cost reduction

• Temporary Construction Materials

In the interior construction industry, there is a demand for the efficiency of partition work. In particular, reducing the burden on workers and ensuring safety are crucial. Traditional temporary supports are heavy and cumbersome to transport and install, which has been a challenge. Alpa, with its ultra-lightweight design, can be easily carried and installed even by women and elderly workers. This improves work efficiency and creates a safe working environment. 【Usage Scenarios】 - Installing partitions at interior construction sites - Temporary setups during renovation work - Temporary setups during store layout changes 【Benefits of Implementation】 - Reduced burden on workers - Shortened construction period - Improved safety

• Temporary Construction Materials

In disaster recovery sites, the rapid construction of temporary structures is required. In situations that involve human lives, such as emergency repairs of collapsed buildings and the establishment of evacuation shelters, the efficiency of transporting and assembling materials is crucial. Traditional temporary supports are heavy and cumbersome to transport and install, which has been a challenge. Our "Alpa" achieves high strength while being ultra-lightweight, strongly supporting the construction of temporary structures in disaster recovery. 【Usage Scenarios】 - Emergency repairs of collapsed houses - Setting up evacuation shelters - Installing temporary scaffolding - Constructing material storage areas 【Benefits of Implementation】 - Reduced work time - Alleviation of labor shortages - Improved safety - Cost reduction

• Temporary Construction Materials

In the communication antenna industry, safe and efficient work is required for the installation and maintenance of antennas. Especially during high-altitude work or in adverse weather conditions, ensuring the safety of workers is the top priority. Additionally, due to the weight of the antennas and constraints of installation locations, lightweight and high-strength supports are essential. Our aluminum temporary support "Alpa" addresses these challenges. 【Usage Scenarios】 - Installation work for communication antennas - Maintenance work for antennas - Use as temporary scaffolding 【Benefits of Implementation】 - Improved work efficiency due to lightweight design - Enhanced safety due to high strength - Resistant to rust, allowing for long-term use

• Temporary Construction Materials

In the stage lighting industry, the safety and efficiency of installing and adjusting lighting fixtures are essential. Particularly when height and angle adjustments are necessary, a stable platform and ease of installation and movement are crucial. Inadequate scaffolding not only jeopardizes the safety of workers but also increases the risk of lighting fixtures falling or being damaged. The aluminum temporary support column "Alpa" achieves high strength while being lightweight, supporting the safe and efficient installation and adjustment of stage lighting. 【Usage Scenarios】 - Installation of stage lighting - Height adjustment of lighting fixtures - Fine-tuning of lighting angles - Use as temporary scaffolding 【Benefits of Implementation】 - Reduced burden of transportation and installation work due to lightweight design - Improved safety due to high strength - Assurance of reliability through patent acquisition - Cost reduction through long-term use

• Temporary Construction Materials

In the warehouse industry, shelves are frequently installed and reinforced to enhance the efficiency of product storage. Particularly in warehouses that handle heavy items, the strength and safety of the shelves are crucial. Traditional temporary supports are heavy and cumbersome to install and move, which can reduce work efficiency. Alpa achieves high strength while being ultra-lightweight, streamlining the installation and reinforcement of shelves. 【Usage Scenarios】 - Installation of shelves within the warehouse - Reinforcement of existing shelves - Securing storage space for heavy items 【Benefits of Implementation】 - Reduction in work time - Decrease in worker burden - Improvement in safety

• Temporary Construction Materials

In agricultural greenhouse structures, a robust and stable design is required to optimally maintain the growing environment for crops. In particular, the strength and durability of the supports are crucial for withstanding strong winds and heavy snowfall. Additionally, improving the efficiency of greenhouse installation and maintenance tasks is essential for increasing productivity. The aluminum temporary support "Alpa" achieves high strength while being lightweight, addressing challenges in the installation and management of greenhouse structures. 【Usage Scenarios】 - Framework for greenhouses - Reinforcement for plastic houses - Installation of shade and insect nets - Installation of shelves 【Benefits of Implementation】 - Improved work efficiency due to reduced weight - Enhanced stability of structures due to high strength - Resistant to rust, allowing for long-term use - Cost reduction

• Temporary Construction Materials

In the plant maintenance industry, ensuring safety and improving work efficiency are always required. Particularly in high-altitude work and handling heavy objects, the reliability of temporary supports is crucial. Traditional temporary supports are heavy and cumbersome to transport and install, which increases the burden on workers and can lead to longer work times. Alpa achieves high strength while being ultra-lightweight, supporting safe and efficient work in plant maintenance. 【Usage Scenarios】 - Maintenance work on piping and equipment within the plant - Installation of scaffolding during high-altitude work - Temporary placement of heavy objects 【Benefits of Implementation】 - Reduced burden on workers due to lightweight design - Ensured safety through high strength - Faster installation contributes to reduced work time

• Temporary Construction Materials

In the shipbuilding industry, there is a constant demand for improved safety and work efficiency in high-altitude operations. Particularly in the assembly and repair of hulls, the lightweight of scaffolding is crucial. Traditional temporary supports are heavy and cumbersome to move and install, which increases the burden on workers and leads to wasted work time. Alpa achieves ultra-lightweight yet high strength, making scaffolding on shipbuilding sites safe and efficient. 【Usage Scenarios】 - Scaffolding inside the hull - Scaffolding outside the hull - Scaffolding during painting work 【Benefits of Implementation】 - Reduced burden on workers - Shortened work time - Improved safety

• Temporary Construction Materials

In the event setup industry, speed and safety in installation and removal are essential. Particularly, the preparation period for events is limited, and rapid setup is the key to success. Traditional temporary supports are heavy and cumbersome to transport and install, which has been a factor in reducing work efficiency. Our aluminum temporary support "Alpa" achieves high strength while being ultra-lightweight, contributing to the efficiency of event setup. 【Usage Scenarios】 * Exhibition booth setup * Temporary stage setup * Temporary enclosures for event venues * Other temporary structure setups 【Benefits of Implementation】 * Reduction in work time * Decrease in labor costs * Improved safety * Reduced burden of setup and removal tasks

• Temporary Construction Materials

In the construction industry, ensuring the safety of workers and shortening construction periods are always required. Temporary support columns are essential for supporting the structure of buildings, but their weight can become a burden for workers and may pose safety risks. Additionally, the effort required for transportation and installation can impact the construction schedule. Our aluminum temporary support column, "Alpa," is lightweight yet boasts high strength, developed to enhance safety at construction sites and significantly improve work efficiency. 【Usage Scenarios】 - Ensuring safety during high-altitude work - Installation and dismantling of formwork supports - Working in narrow spaces 【Benefits of Implementation】 - Improved safety through reduced burden on workers - Shortened construction periods due to reduced transportation and installation time - Cost savings

• Temporary Construction Materials

"Alpa" is a lightweight aluminum temporary support post that anyone can easily carry. Compared to the conventional model weighing 14.2 kg, the Alpa 45 (Type 70) is ultra-light at just 8.9 kg. It can be safely handled by those who may lack physical strength, such as women and elderly workers. In 2025, we will release the Alpa 45 (Type 60 and Type 50). The Type 50 achieves a weight reduction to 7.1 kg while maintaining a load capacity of 19 kN. We also offer the Alpa 75 with a load capacity of 36 kN. 【Features】 ■ Conventional model 14.2 kg → Ultra-light 8.9 kg (Alpa 45) ■ Conventional model 14.7 kN → High strength 19 kN (Alpa 45) ■ Can be used without connections due to the insertion pipe method ■ The length of the post can be manufactured to your desired specifications (Types 90, 70, 60, 50, 40, 30) ■ Patents obtained in various countries (Japan, Europe, UK, Australia, China) *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials

"Nukebo" is a slip prevention support pin with a simple structure that makes replacement work easy. Installation involves turning the slip prevention to insert it. It is made of S45C, which provides high strength. Additionally, it prevents the pipe support insertion tube from slipping out. Please insert it in the same direction as the pin. 【Features】 ■ Simple structure for easy replacement work ■ Made of S45C for high strength ■ Prevents the pipe support insertion tube from slipping out *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials

The "Tesler" is a handrail hardware that is easy to carry and can significantly improve work efficiency. It is a compact product and can be attached to our support post "Alpa." Once the post is set up, it must be rotated 45 degrees (up to a tilt of 3 degrees). Please firmly tap the slide plates on both sides to ensure that the post is stable. 【Features】 ■ The post stands independently on the handrail ■ Easy to carry, significantly improves work efficiency *For more details, please download the PDF or feel free to contact us.

• handrail
• Temporary Construction Materials

"Hit it! Choroque" is a corner fastening hardware that becomes sturdier the more you hit it. It is compact, easy to carry, and significantly improves work efficiency. Since it is designed to tighten only when hit, please make sure to hit it. It is easier to work if the steel pipe extends about 200mm from the corner panel. 【Features】 ■ Corner fastening possible in 5 minutes, simple and reliable structure ■ Easy to carry, significantly improves work efficiency *For more details, please download the PDF or feel free to contact us.

• Fastening hardware
• Temporary Construction Materials

The "Z Series" is an aluminum steel pipe that has thickened corners to improve the section modulus and the second moment of area, thereby enhancing strength. The tolerance (the allowable range of error) is set at ±0mm to 0.25mm to prevent "shrinkage" of the cross-section. Preventing "shrinkage" means ensuring strength. Additionally, sampling tests are conducted for each production lot at a public testing laboratory in Japan, and test reports are provided. 【Features】 ■ Different cross-sections ■ Different tolerances ■ Different strength specifications *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials

"Gatch" is a combination system formwork that does not require skilled labor and can accommodate labor shortages. The dimension unit (module) is 30mm. By combining components, it can be applied not only to walls and slabs but also to columns and beams. The material is FRP, which enhances durability, and it can be combined repeatedly, allowing for reuse across different sites. It has high rigidity and provides a good concrete surface. 【Features】 ■ Significant cost reduction ■ Capable of handling inside and outside corners in three dimensions ■ High durability ■ Usable multiple times ■ Easy order (standard products) *For more details, please refer to the PDF materials or feel free to contact us.

• Formwork material
• Wood panel and frame wall construction

The "Pinpoint Construction Method" is a formwork dismantling method that can be implemented using your existing pipe supports. It allows for an early start to the finishing process and reduces the amount of formwork materials needed for transportation. Additionally, it lowers transportation costs for formwork materials and decreases labor for formwork (reducing unloading efforts). In fiscal year 2008, it was selected for the Ministry of Land, Infrastructure, Transport and Tourism's support project for new field entry and management innovation model development in the construction industry, and in fiscal year 2012, it was registered in the Ministry of Land, Infrastructure, Transport and Tourism's know-how and technology transfer support project. 【Features】 - It is possible to significantly reduce the use of plywood and supports. - It contributes to shortening the overall construction process. - It can reduce damage to temporary materials. - It allows for a cleaner job site. - It ensures a better environment for neighboring areas (reducing transportation costs). *For more details, please download the PDF or feel free to contact us.

• Civil Engineering Method
• Special Construction Method