吉野 List of Products and Services

"Rollin" is a roll-screen type welding blackout sheet. It can be easily stopped at any position with one hand. It can be rolled up for loading and unloading items. Additionally, it is a hanging type that can be easily attached to pipes and frames with one touch. Furthermore, it can be attached to your existing partition frames (aluminum or steel) as well as various other pipes and frames. 【Features】 ■ Made in Japan ■ Can be freely raised and lowered ■ Improves the working environment ■ Easy to install ■ Blocks harmful ultraviolet rays *For more details, please refer to the PDF materials or feel free to contact us.

• others

"Papillon" is a welding screen that can be placed in the corner of a workspace to create a welding booth of approximately 2 tatami mats. It comes with casters for easy movement. After assembly, the hinges are not fixed, allowing for entry and exit like a door. By combining products, you can create an independent booth of 1.8m square or 3.6m square. 【Features】 ■ Foldable ■ Suitable for when a temporary welding booth is needed ■ No adhesive required (no drying time needed), so it can be used immediately after assembly ■ Does not take up storage space ■ The frame is made of aluminum, making it lightweight and durable *For more details, please refer to the PDF document or feel free to contact us.

• others

The "French" is a welding screen that can be set up simply by opening it 90 degrees on either side, creating a welding booth of approximately one tatami mat size. No adhesive is required (meaning no drying time), so it can be used immediately after assembly. It is suitable for situations where a temporary welding booth is needed. Additionally, it comes with casters for easy mobility. 【Features】 ■ Foldable ■ Just open it 90 degrees on either side to create a welding booth of approximately one tatami mat size ■ Very popular U-shaped design ■ No adhesive required (meaning no drying time), so it can be used immediately after assembly ■ Does not take up storage space *For more details, please refer to the PDF document or feel free to contact us.

• others

The 'Ecran' is a foldable welding shield partition. It is suitable for situations where a temporary welding booth is needed. It is easy to load into a vehicle and does not take up storage space. Additionally, it requires no adhesive (i.e., no drying time), so it can be used from the day it arrives. We also offer a 'spatter sheet type.' Please contact us for more details. 【Features】 ■ Easily unfolds for use ■ Quickly folds for storage ■ Foldable ■ Suitable for situations where a temporary welding booth is needed ■ Requires no adhesive (i.e., no drying time), so it can be used from the day it arrives *For more details, please refer to the PDF document or feel free to contact us.

• others

"Kugureeru" is a curtain-type welding shield that balances the blocking of harmful rays generated during welding with the passage of people and objects. By installing the curtain-type sheets in a double layer, slightly offset, it prevents harmful rays from leaking through the slits. Additionally, you only need to assemble the frame with the included tools and attach the sheets. No adhesive is required, so it can be used from the day it arrives. 【Features】 ■ Prevents leakage with double curtains ■ Easy to install ■ No construction required ■ Prevents harmful rays from leaking through the slits ■ Simply assemble the frame and attach the sheets with the included tools *For more details, please refer to the PDF document or feel free to contact us.

• others

Introducing the "YS Series," which features an aluminum frame. Approximately 99% of the frame is recyclable. We offer a "Welding Fence" that includes a shading sheet to protect the eyes from harmful ultraviolet rays and visible light generated during welding and thermal cutting operations, as well as a "Spatter Fence" that comes with a spatter sheet to prevent the scattering of sparks during welding and cutting operations. 【Features】 ■ Approximately 99% of the frame is recyclable ■ About 40% lighter than steel (plastic-coated iron pipe) ■ Bolt-type for easy assembly and disassembly ■ No adhesive required *For more details, please refer to the PDF document or feel free to contact us.

• others

The "YS-210AJ" is a heat-insulating sheet that reflects radiant heat to improve the working environment. It is made from a high-temperature resistant flame-retardant fiber fabric, which is also used as a spatter sheet (for welding sparks), and is coated with an aluminum vapor-deposited film to efficiently reflect radiant heat. Additionally, the aluminum surface repels water, oil, and other substances. 【Features】 ■ Suitable for blocking radiant heat generated during tasks in front of furnaces ■ Coated with an aluminum vapor-deposited film to efficiently reflect radiant heat ■ The aluminum surface can repel water, oil, and other substances *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a cross that can be used in all locations where cables are present, such as railways, power, communications, and factories. It uses non-combustible high-density special silica fibers. The water-based flame-retardant coating features a supple texture. Additionally, the coated surface has a drip-proof effect. It is a sheet made from materials that have been adopted by major companies as a countermeasure against fire incidents. 【Features】 ■ Non-combustible high-density special silica fibers ■ Water-based flame-retardant coating with a supple texture ■ Non-asbestos ■ Non-ceramic ■ Coated surface with drip-proof effect *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a glass cloth that achieves a heat resistance temperature of 900°C. It has a higher heat resistance temperature compared to glass fibers and superior tensile strength compared to silica and ceramic fibers. Additionally, ceramic fibers degrade quickly because they cannot be woven without mixing in a binder (non-heat-resistant fibers), but this product is woven solely from fibers that can withstand 900°C, resulting in different durability. 【Features】 ■ Higher heat resistance temperature compared to glass fibers ■ Superior tensile strength compared to silica and ceramic fibers ■ Significantly reduces skin irritation, making it easier to use ■ Does not use ceramic fibers ■ Suitable for those troubled by the rapid degradation and regulations associated with ceramic cloth types *For more details, please refer to the PDF document or feel free to contact us.

• others

Yoshino Co., Ltd. offers "Industrial Heat-Resistant Fabrics." Since they retain air within the fibers, they have low thermal conductivity, making them suitable for insulation applications. We provide various types, including "Glass Fabric," which is ideal for insulation, and "Aluminum Glass Fabric," which can repel water and oil due to its aluminum surface. You can choose according to your requirements. 【Features】 <Glass Fabric> - Retains air within the fibers, resulting in low thermal conductivity, making it suitable for insulation applications. - Contains extremely low levels of chlorine and fluorine, which can cause stress corrosion in stainless steel. - Non-asbestos and non-ceramic. *For more details, please refer to the PDF materials or feel free to contact us.

• others

"Aramid Power" is a glove made from Teijin Aramid's aramid fiber "Twaron" (high-strength fiber). It has cut resistance that is twice that of leather and 60% higher than steel, making it suitable for work in construction, automotive, machinery, steel, shipbuilding, glass, and other tasks that involve a risk of cuts. Additionally, it is a long type that covers the wrist. 【Features】 ■ Strong against cutting tools ■ Resistant to abrasion ■ More than twice the cut resistance of leather ■ Long type that covers the wrist *For more details, please download the PDF or feel free to contact us.

• Safety and consumables

"#4612" is a highly versatile non-asbestos heat-resistant joint sheet packing. It is flexible, adheres well to flange surfaces, and provides good sealing performance. Additionally, it can be widely used as a gasket for piping flanges and equipment in environments involving steam, acids, alkalis, hot oil, solvents, and more. 【Features】 - Domestic joint sheets processed in Japan - Complies with JIS S3200-7:2004 Water Supply Equipment - Leaching Performance Test - Operating temperature range: -50°C to 180°C - Available in a wide range of sizes from 15A to 300A - Demonstrates capability in various work environments *For more details, please refer to the PDF document or feel free to contact us.

• others

"#4635" is a high-performance non-asbestos heat-resistant joint sheet packing. With an improved heat resistance due to a special heat-resistant binder, it achieves a top-class usage temperature of "350℃" for joint sheet flange packing. Thanks to a tough material with a carefully formulated composition, it can withstand rapid changes in temperature and pressure, as well as excessive tightening. 【Features】 ■ Domestic joint sheets processed in Japan ■ No paste required ■ Capable of rapid temperature and pressure changes ■ Sufficient compression characteristics ■ High sealing performance under high pressure ■ Resistant to sticking *For more details, please refer to the PDF document or feel free to contact us.

• others

The "YS-EPT125-4998" is a fatigue-reducing mat made of EPDM rubber with various characteristics (low odor type). "EPDM rubber" is a material that excels in weather resistance and can be used outdoors, making it suitable for automotive parts, roads, bridges, and more. The sulfur-free manufacturing process significantly reduces the characteristic odor of rubber. It uses environmentally friendly non-halogen flame retardants, achieving flame retardant performance equivalent to UL94HF-1. Additionally, the bubbles within the mat are "independently foamed," meaning there is no water permeability. 【Features】 ■ 45° cut at the ends to reduce tripping hazards ■ Surface texture provides slip resistance ■ Moderate cushioning makes it suitable for standing work ■ Uses environmentally friendly non-halogen flame retardants ■ Made in Japan *For more details, please refer to the PDF document or feel free to contact us.

• Other fixtures and fittings

"Pikapack" is a fluorescent light cover that can be used for a wide range of purposes, including disaster prevention, energy saving, hazard prevention, and insect control. It prevents glass shattering in the event of damage to fluorescent lights due to earthquakes or accidents. Additionally, it is a thin sheet approximately 0.35mm thick, making it easy to handle and cut with scissors, allowing it to be compatible with fluorescent lights other than 40W and 110W. 【Features】 ■ Shatter prevention ■ Increased brightness and reduced lamp image ■ UV cut (with insect repellent effect) ■ Easy installation ■ Widely usable for safety measures and energy-saving purposes *For more details, please refer to the PDF document or feel free to contact us.

• Other fixtures and fittings
• Disaster prevention supplies

The "Aramid Power Arm Cover" is a cut-resistant arm cover knitted from 100% virgin aramid fiber. This is the standard type of cut-resistant arm cover. When combined with the "Aramid Power Gloves," it can cover from the fingertips to the elbow. 【Features】 ■ 100% virgin aramid fiber ■ Can be combined with Aramid Power Gloves to cover from fingertips to elbow ■ Washable ■ Made in Japan *For more details, please refer to the external link page or feel free to contact us.

• Safety and consumables

The "Aramid Power Arm Cover (Flame-Resistant Fiber)" enhances flame resistance by knitting yarn made from virgin aramid fibers and flame-resistant fibers. When combined with the "Aramid Power Gloves," it can cover from fingertips to elbows. 【Features】 ■ Type with flame-resistant fibers ■ Can be combined with Aramid Power Gloves to cover from fingertips to elbows ■ Washable ■ Made in Japan *For more details, please refer to the external link page or feel free to contact us.

• Safety and consumables

The "Altotto Protective Gloves (3-Finger)" are made from Altotto fabric, which is also used as a heat-insulating sheet. Although they are thick, the three-finger design makes it easier to perform "pinching" tasks. Please use them when you want to prevent radiant heat. 【Features】 ■ Made from Altotto fabric ■ Three-finger design allows for easier "pinching" tasks ■ Prevents radiant heat ■ Made in Japan *For more details, please refer to the external link page or feel free to contact us.

• Safety and consumables

Our company manufactures and sells various products made from flame-resistant fibers, including safety-related products. Yoshino's spatter sheets come in four types of weaves: "satin weave," "twill weave," "plain weave," and "felt (non-woven fabric)." Flame-resistant fibers are excellent in flame retardancy, but when woven, gaps occur in the weave. To seal these gaps, silicone is coated on the surface of the fabric. The coating also has the effect of repelling sparks, preventing slag from staying in one place, and the moisture contained in the silicone evaporates, allowing heat to escape. This results in less deterioration of the fabric compared to uncoated materials. 【Weaving methods of Yoshino's spatter sheets】 ■ Satin weave ■ Twill weave ■ Plain weave ■ Felt (non-woven fabric) *For more details, please refer to the external link page or feel free to contact us.

• Disaster prevention supplies

Both "non-combustible" and "flame-retardant" are not certifications of "non-flammability," and if the selection is not appropriate for the intended use, there is a possibility of a major accident. Non-combustible certification refers to certification for "building materials = construction materials (such as wood, glass, concrete, etc.)," and it does not guarantee "non-flammability." When selecting sheets, it is important to consider not only the results of tests but also the specifications, so we recommend verifying with sample fabrics in the actual environment. 【Certification and Testing Details】 ■ Non-combustible Certification - Certification for building materials = construction materials (such as wood, glass, concrete, etc.) ■ Disaster Prevention Performance Test - Targets construction materials for large buildings, underground shopping areas, curtains and bedding in public places, construction sheets, etc. ■ JIS A1323 Test - A test that receives sparks generated from welding or cutting. *For more details, please refer to the external link page or feel free to contact us.

• Disaster prevention supplies

Just because a material is heat-resistant doesn't mean you can expect it to have insulating properties. For example, metals like aluminum are excellent in heat resistance and fire resistance, but they don't provide much in terms of insulation. Conversely, there are materials like polystyrene foam that excel in insulation but are weak against high temperatures and flames. When selecting sheets, it is important to consider the intended purpose of use. 【Features】 ■ Insulation: Slows down the transfer of heat ■ Heat shielding: Reflects radiant heat to block it ■ Heat resistance: Maintains shape at high temperatures ■ Fire resistance: Durable against flames *For more details, please refer to the external link page or feel free to contact us.

• Disaster prevention supplies