北村製作所 List of Products and Services

The "Over Slide Door" we handle allows for smooth loading and unloading of cargo located in the central part of the storage area. Loading and unloading operations at the rear are certainly possible, and even in places where it is difficult to secure loading space, work can be done by parking the vehicle alongside. Additionally, the large opening of the side door enables loading using a forklift. It eliminates dead space in the storage area and achieves rationalization and efficiency in loading and unloading operations. 【Features】 ■ High side door sliding opening rate (approximately 60%) ■ Smooth loading and unloading of cargo located in the central part of the storage area ■ No dead space created in the storage area ■ Work can be done by parking the vehicle alongside even in places where it is difficult to secure loading space ■ Loading using a forklift is possible *For more details, please refer to the PDF document or feel free to contact us.

• Specially equipped vehicles

This product is a type of lift that manually pulls out a table stored under the body floor when using a lift. The table is a single piece with a wide depth, and it features a "tilt" function where the tip slopes down to make contact with the ground. The tip drop prevention caster stopper prevents the cargo from falling, ensuring safety. It is suitable for moving companies and general transportation businesses, enabling quick and efficient loading and unloading operations. 【Features】 ■ Lift capacity: 600kg・800kg ■ Effective dimensions of the lift table (length) is 1,130mm ■ A foldable inclined plate is attached to the tip of the lift ■ Recommended lift option products: - Side stopper, outdoor remote control switch stainless steel storage box *For more details, please refer to the PDF materials or feel free to contact us.

• Specially equipped vehicles
• lift

The "Half Wing" is a product that allows loading and unloading operations with forklifts and other equipment even in low-ceiling cargo handling spaces. The "Half Wing" is designed to fully open the doors if the height of the lower roof is 350 to 400 mm higher than the overall height. It provides a highly airtight environment that ensures excellent quality control for the loaded items. 【Features】 ■ Adopts a user-friendly hydraulic opening and closing mechanism, similar to wing bodies ■ Half Wing: The structure allows for full door opening if the height of the lower roof is 350 to 400 mm higher than the overall height *For more details, please refer to the PDF document or feel free to contact us.

• Specially equipped vehicles

We would like to introduce the "Refrigerated Van" handled by Kitamura Manufacturing. It uses 50mm thick insulation material (styrene foam) to effectively cut external heat and maintain freshness. In addition, our company also offers "Refrigerated and Frozen Vans" that use rust-resistant stainless steel for the floor and rear doors. Please feel free to contact us. 【Features】 ■ Uses clean-colored aluminum for the exterior material ■ Effectively cuts external heat ■ Standard equipment: indoor incandescent light, top marker lamp, side marker lamp, indoor light, emergency contact switch ■ Aluminum (wave) type is also available *For more details, please refer to the PDF document or feel free to contact us.

• Specially equipped vehicles

The "Dry Van" is a basic product suitable for various industries and cargo handling and transportation, including the transportation industry, office equipment, books and publications, furniture, bedding, and interior items. It comes standard with indoor incandescent lights, top marker lamps, side marker lamps, indoor lights, and emergency contact switches. Additionally, we also offer the "Delivery Van," which is equipped with a shutter door that does not take up space when opened and closed. Please feel free to contact us. 【Features】 ■ Lightweight yet rigid, with excellent durability ■ Basic van body suitable for various industries and cargo handling and transportation ■ Standard equipment: indoor incandescent lights, top marker lamps, side marker lamps, indoor lights, and emergency contact switches ■ For aluminum exterior color, only the roof of the exterior panel is standard aluminum sheet (silver color) *For more details, please refer to the PDF document or feel free to contact us.

• Specially equipped vehicles

The "Bottle Car" is a product that utilizes our uniquely developed aluminum profiles, achieving weight reduction and improved fuel efficiency. The side doors use a one-touch sliding door. Additionally, the interior layout can be freely designed to match the transported products and delivery routes. We offer a variety of products ranging from regular route delivery to pallet delivery, and from ambient dry to refrigerated options. 【Features】 ■ Utilizes our uniquely developed aluminum profiles ■ Achieves weight reduction and improved fuel efficiency ■ Side doors use a one-touch sliding door ■ Allows for smooth loading and unloading even in narrow spaces ■ Interior layout can be freely designed to match transported products and delivery routes *For more details, please refer to the PDF document or feel free to contact us.

• Specially equipped vehicles

The "Wind Power Generation Equipment Storage Box" is a product that is highly airtight, lightweight, and excels in seismic resistance and snow load strength. It uses adhesive-structured aluminum panels for the roof, walls, and doors, protecting the equipment from indoor temperature increases due to sunlight and salt damage. It is ideal for storing equipment when installing monitoring protection relay panels, protection relay panels, DC power supplies, etc. Please feel free to contact us when you need assistance. 【Features】 ■ Protects equipment from indoor temperature increases due to sunlight and salt damage ■ Highly airtight, lightweight, and excellent in seismic resistance and snow load strength ■ Suitable for installation in harsh locations such as salt damage areas ■ Appropriate for storing equipment when installing monitoring protection relay panels, protection relay panels, DC power supplies, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Storage
• Wind power generation

The "Folding Door" is a modern safety door that allows for safe and speedy loading operations even in crowded areas with pedestrian traffic and cargo. There is no risk of the door opening while in motion, completely eliminating any potential issues with oncoming vehicles or pedestrians. It is safe even in narrow passageways. We offer a wide variety of options, such as "Folding Doors with Flaps" and "Refrigerated Folding Doors," allowing you to choose according to your needs. 【Features】 - Lightweight one-touch operation with one hand - Pursuit of functionality and safety - Products remain dry even in the rain - Safe in narrow passageways - Doors can open even in tight parking spaces *For more details, please refer to the PDF document or feel free to contact us.

• Specially equipped vehicles

Our company offers "Solar Power Generation Equipment Maintenance and Inspection Services." We have a comprehensive service system that can respond anywhere in the country. From Hokkaido to Kyushu, we have service centers located at our branches and sales offices in 14 locations nationwide, including those of our affiliated group companies. We strive for speedy, safe, and reliable responses. Please feel free to contact us when you need our services. 【Features】 ■ Comprehensive service system that can respond anywhere in the country ■ Service centers are located at our branches and sales offices in 14 locations nationwide, including those of our affiliated group companies, from Hokkaido to Kyushu ■ We promise high-quality maintenance based on our knowledge and experience *For more details, please refer to the PDF materials or feel free to contact us.

• maintenance
• Other services and technologies
• Solar power generation equipment

The "Disaster Prevention Storage Warehouse" is a product that is very easy to install as it is a factory-completed item. With excellent insulation and airtightness, it allows for long-term storage of emergency food supplies and other items. The aluminum body is resistant to corrosion and maintains a beautiful appearance. It can be customized for snow load and salt damage resistance, making it suitable for any installation location. Additionally, there are a variety of options available, including solar panels, internal shelf installation, landscape adaptation, and specified color painting. 【Features】 - The aluminum body is resistant to corrosion and maintains a beautiful appearance. - Excellent insulation and airtightness enable long-term storage of emergency food supplies and other items. - Customizable for snow load and salt damage resistance, suitable for any installation location. - Lightweight and highly earthquake-resistant, featuring Kitamura Seisakusho's e-KSP structure (flat panel specification). - Very easy to install as it is a factory-completed item. - As a manufacturer with expertise in communication station construction, we provide high-quality products. *For more details, please refer to the PDF document or feel free to contact us.

• Disaster prevention supplies
• Storage

This is a facility (shelter/storage box) that houses essential head-end equipment and network facilities for cable television system configuration. We manufacture it to suit various applications, including head-end, sub-center, and FTTH. To prevent situations where cable television services are interrupted due to equipment failure or disasters, it is important to maintain the equipment in good condition and implement measures to ensure stable operation during emergencies. Our facility uses adhesive panels that sandwich high-insulation boards made of aluminum sheets, providing high airtightness and excellent insulation. Additionally, we select ventilation and air conditioning equipment according to the heat generation of the devices, maintaining appropriate indoor temperature and humidity to prevent condensation and sudden indoor temperature rises, contributing to the longevity of the equipment. Moreover, the waterproof performance complies with JIS protection grade 4 for splash-proof types, preventing rainwater intrusion from typhoons and heavy rains that have been frequent in recent years. It also excels in seismic strength and snow load resistance, protecting important equipment from natural disasters.

• others

This is a facility (shelter/storage box) that houses disaster prevention administrative wireless communication equipment for prefectures and municipalities. It is utilized nationwide as a disaster prevention administrative wireless station. The disaster prevention wireless system, built as a means of collecting and transmitting disaster information and disaster prevention information during emergencies, requires seismic and power outage measures to ensure that the wireless equipment can fully function during disasters. Our facility, which excels in seismic resistance and waterproofing, protects the wireless equipment safely not only during normal times but also during disasters such as earthquakes and heavy rainfall. Additionally, due to its airtight and insulated structure, it can maintain a suitable temperature environment for emergency power supply equipment used as a countermeasure against power outages, contributing to stable operation and longevity of the equipment. 【Features ※The seismic strength/waterproof performance/snow load strength below are examples】 ◯ Uses aluminum adhesive panels to achieve lightweight construction with excellent strength and corrosion resistance ◯ Excellent airtightness and insulation protect equipment from indoor temperature rises ◯ Seismic strength... Input acceleration: Horizontal 1.0G, Vertical 0.5G ◯ Waterproof performance... Complies with JIS protection class 4 for splash-proof type ◯ Snow load strength... Supports roof loads for snow accumulation from 2m to 6m ◯ The size of the facility can be customized according to the installation location and equipment.

• others

This is a shelter (storage box) for a radiation monitoring system that measures environmental radiation levels in the region. It is equipped with a radiation detector on the roof and houses radiation measuring instruments, meteorological observation devices, and data transmission equipment. This product is used as an environmental radiation measurement station in prefectures across the country. Our shelter utilizes adhesive panels made of aluminum sheets sandwiched with high insulation boards. It is lightweight yet possesses high strength and seismic resistance. Additionally, its excellent airtightness enhances insulation, preventing indoor temperature rises due to sunlight and maintaining suitable temperature and humidity for the housed equipment. It is characterized as an energy-efficient shelter, as it reduces the need for air conditioning. Furthermore, it has excellent waterproofing, protecting the equipment from natural disasters such as typhoons and torrential rains. Moreover, our shelter is easier to install on-site compared to traditional buildings, allowing for quick setup. We can propose the most suitable construction methods based on the situation. Please feel free to contact us.

• Other measuring instruments
• Surveying Office

We introduce the shelters (shelters/storage boxes) installed at earthquake observation sites designated by the government or companies. These products house strong seismic measurement devices and communication terminals that transmit measurement data. Our shelters utilize adhesive panels that sandwich high-insulation boards with aluminum sheets. They are lightweight yet possess high strength and excellent seismic resistance. Additionally, they have high airtightness and superior insulation properties. They protect housed equipment from natural disasters such as earthquakes and typhoons, contributing to the stable operation of the equipment. 【Features ※The seismic strength/snow load strength/floor strength/waterproof performance below are examples】 ◯ Uses aluminum adhesive panels to achieve lightweight and high strength ◯ Excellent airtightness and insulation, protecting equipment from indoor temperature rises ◯ Seismic strength... Input acceleration: Horizontal 1.0G, Vertical 0.5G ◯ Snow load strength... Supports roof loads from 2m to 6m of snow ◯ Floor strength... Uniform load: 5000N/m2 (however, appropriate reinforcement is required at equipment installation points) ◯ Waterproof performance... Complies with JIS protection class 4 for splash-proof type ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment ◯ Shelter size can be customized according to the installation location and equipment ◯ Easy installation work, allowing for shortened construction periods ◯ Supports maintenance and servicing after installation

• Other measuring instruments
• Other analytical equipment
• Vibration and Sound Level Meter

This is a shelter (housing box) for measurement stations monitoring air pollution conditions. It is suitable for housing measuring instruments and telemetry for carbon monoxide, nitrogen dioxide, sulfur oxides, suspended particulate matter, and fine particulate matter (PM2.5), among others. To ensure stable operation of the equipment, it is important to eliminate fluctuations in temperature and humidity within the equipment housing and maintain them at appropriate levels. Our shelters use adhesive panels that sandwich high-insulation boards with aluminum sheets, providing excellent airtightness and insulation, allowing for the maintenance of suitable temperature and humidity for housed equipment throughout the year. This feature helps reduce the use of air conditioning, making it an energy-efficient shelter. Additionally, our shelters are easier to install on-site compared to traditional buildings, allowing for quick installation within a short period. We can propose the most suitable construction method based on the situation. Please feel free to contact us.

• Other measuring instruments
• Surveying Office

This is a rain observation shelter (shelter/storage box) that houses rain gauge observation equipment and telemetry devices. Our shelters use adhesive panels made of aluminum sheets sandwiched with high insulation boards. They are lightweight yet possess high strength. Furthermore, they have excellent airtightness, insulation, and waterproof properties. They protect the housed equipment from various natural disasters and contribute to the stable operation of the devices. 【Features】*The waterproof performance/snow load strength/seismic strength/floor strength mentioned below are examples. ◯ Uses aluminum adhesive panels to achieve lightweight and high strength. ◯ Shelter size can be customized according to the installation location and equipment. ◯ Mounting brackets for rain gauges can be installed on walls and roofs. ◯ Easy installation reduces construction time. ◯ Excellent airtightness and insulation protect equipment from indoor temperature rises. ◯ Waterproof performance... Complies with JIS protection grade 4 for splash-proof. ◯ Snow load strength... Supports roof loads for snow depths of 2m to 6m. ◯ Seismic strength... Input acceleration: horizontal 1.0G, vertical 0.5G. ◯ Floor strength... Uniformly distributed load of 5000N/m2 (however, appropriate reinforcement is required at equipment installation points). ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment. ◯ Supports maintenance and upkeep after installation.

• Other measuring instruments
• Surveying Office

This is a shelter (shelter/storage box) for river level observation that houses necessary water level gauges and telemetry equipment. It is a robust and waterproof structure that protects the observation instruments not only during normal conditions but also during emergencies such as typhoons and heavy rain, ensuring accurate river level data collection. 【Features】 *The waterproof performance/snow load strength/seismic strength/floor strength mentioned below are examples. ◯ Uses aluminum adhesive panels for lightweight and high strength. ◯ Sizes can be customized to fit the installation location and equipment. ◯ Easy installation reduces construction time. ◯ Excellent airtightness and thermal insulation protect the equipment from indoor temperature rises. ◯ Waterproof performance... Complies with JIS protection grade 4 for splash-proof. ◯ Snow load strength... Supports roof loads from 2m to 6m of snow. ◯ Seismic strength... Input acceleration: horizontal 1.0G, vertical 0.5G. ◯ Floor strength... Uniformly distributed load of 5000N/m2 (with appropriate reinforcement at equipment installation points). ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment. ◯ Supports maintenance and upkeep after installation.

• Other measuring instruments

This is a shelter that houses alarm devices, power supply units, and siren control panels to notify residents in river areas about dam discharges. To ensure stable operation of the equipment, it is important to eliminate fluctuations in temperature and humidity within the equipment storage shelter and maintain them at appropriate levels. Our shelter uses adhesive panels that sandwich high-insulation boards made of aluminum sheets, providing excellent airtightness and insulation, allowing it to maintain suitable temperature and humidity for the installed equipment throughout the year. Additionally, it boasts excellent waterproof performance and strength, protecting the housed equipment from heavy rain and snowfall. The waterproof performance meets JIS protection grade 4 for splash-proof design, preventing rainwater from entering. It is designed to withstand snow loads of 2m to 6m, and the wall's wind pressure resistance is designed and manufactured according to the standard wind speed of the installation environment.

• others

This is an outdoor stationary storage box (station, shelter, cubicle) designed to accommodate large-capacity nickel-metal hydride batteries, NAS batteries, lithium-ion batteries, and more. 【Features *The waterproof performance/snow load strength/seismic strength/floor strength below are examples】 ◯ Uses aluminum adhesive panels to achieve lightweight and high strength ◯ Sizes can be customized according to the installation location and equipment ◯ Easy installation construction allows for shortened construction periods ◯ Excellent airtightness and insulation protect equipment from indoor temperature rises ◯ Superior corrosion resistance and snow load strength protect equipment from various natural disasters ◯ Waterproof performance... Compliant with JIS protection grade 4 for splash-proof ◯ Seismic strength... Input acceleration horizontal 1.0G, vertical 0.5G ◯ Floor strength... Uniformly distributed load 5000N/m2 (however, appropriate reinforcement is required at equipment installation points) ◯ Wind pressure resistance... Designed according to the standard wind speed of the installation environment ◯ Supports maintenance and upkeep after installation

• Power generation equipment

This is a facility that houses power conditioners (PCS, power converters) for solar power generation. It protects the power converters from various natural disasters. —Contributing to the longevity of power conditioners (PCS, power converters)!!— The average lifespan of a power converter is said to be around 10 to 15 years, with common causes of failure including "failure due to heat" and "damage from disasters such as heavy rain." Our facility protects the equipment from these causes, leading to increased longevity. Our products excel in "air tightness" and "thermal insulation," which helps to reduce indoor temperature rises caused by sunlight and heat generated by the equipment, thereby mitigating the risk of "failure due to heat." Furthermore, we select ventilation and air conditioning equipment according to the heat output of the indoor equipment, allowing us to create an optimal temperature environment. Additionally, the waterproof performance meets JIS protection grade 4 for splash-proofing, preventing rainwater from entering due to heavy rain or typhoons. It also boasts excellent snow load resistance and seismic performance, protecting the equipment from various natural disasters. *We have extensive experience in manufacturing storage boxes for all types of solar power PCS manufacturers. Please feel free to contact us.

• Solar power generation

When installing equipment that is susceptible to heat, it is important to prevent indoor temperature increases caused by sunlight. Our station building uses adhesive panels that sandwich high-insulation boards with aluminum sheets, providing excellent airtightness and insulation, which allows us to maintain suitable temperature and humidity for the housed equipment throughout the year. Furthermore, we select ventilation systems and air conditioning units according to the heat generation of the housed equipment, enabling us to create an optimal temperature environment. Additionally, we can customize the size of the station building according to the installation location and the conditions of the housed equipment. If the size of the station building is large, it can be divided into sizes that can be loaded onto a truck for transportation and assembled on-site. We will propose the most suitable construction method based on the situation.

• Substation equipment

To ensure the stable operation of equipment housed in control panels and similar devices, it is important to minimize external vibrations and shocks as much as possible, and to maintain appropriate temperature and humidity levels within the facility without fluctuations. Our facilities utilize aluminum panels with adhesive structures, making them lightweight and excellent in seismic resistance, airtightness, and thermal insulation, thereby protecting housed equipment from temperature increases due to vibrations and sunlight. Additionally, they are designed to reduce air conditioning usage, making them energy-efficient. Furthermore, we use a highly rust-resistant "cationic electrodeposition coating" for the substrate treatment of components, which allows for a more uniform application of paint compared to conventional coatings, resulting in superior corrosion resistance and longevity even in harsh installation environments. Our facilities are easier and quicker to install on-site compared to traditional buildings. We propose the most suitable construction methods based on the situation. We also select ventilation and air conditioning equipment according to the heat generation of indoor devices.

• Biomass power generation facilities
• Other services and technologies
• Other biomass

This is a corrosion-resistant shelter (shelter/storage box) suitable for installation in coastal areas. In addition to finishes such as fluororesin coating and plating, we also consider the material properties of the components used and manufacture them according to specifications that match the environment. Moreover, to ensure the stable operation of wind power generation equipment (monitoring control panels, relay panels, DC power supply units, etc.), it is essential to eliminate fluctuations in temperature and humidity within the shelter and maintain them at appropriate levels. Our shelters utilize adhesive panels that sandwich high-insulation boards with aluminum sheets, providing excellent airtightness and insulation, which allows for maintaining suitable temperature and humidity for the equipment throughout the year. This feature helps reduce the use of air conditioning, making our shelters energy-efficient. Furthermore, our shelters can be installed more easily and quickly on-site compared to conventional buildings. We can propose the most suitable construction methods based on the situation. Please feel free to contact us. ▼ Here is a video of the shelter for renewable energy facilities https://www.youtube.com/watch?v=0vx7yQdqE4k

• Wind power generation

We manufacture adhesive panels (sandwich panels) that sandwich high-insulation boards with aluminum sheets that have excellent corrosion resistance, and we use them for roofs, walls, and doors. They are lightweight and have excellent seismic resistance. The steel materials around the doors (gate frames) and the underfloor reinforcements (cross members) are coated with cationic electrodeposition paint, which has excellent rust prevention and weather resistance. This is an equipment housing box (station building/shelter) that balances lightweight design with high durability.

• Solar power generation