三京ダイヤモンド工業 List of Products and Services

We would like to introduce our "Artisan Craft DX Segment/Rim" that we handle. The artisan craft has evolved further, enhancing performance. The use of short tips (multi-distribution) has improved cutting ability, and the chip height has increased from 6.0mm to 8.0mm, resulting in a longer lifespan. We offer a "Segment Type" that emphasizes cutting ability and a "Rim Type" that provides a clean finish. These can be used for cutting reinforced concrete (10mm rebar), concrete, and blocks. 【Features】 ■ 20% increase in cutting ability and lifespan (compared to our conventional products) ■ Improved cutting ability with short tips (multi-distribution) ■ Artisan Craft DX Segment: Segment type focused on cutting ability ■ Artisan Craft DX Rim: Rim type that provides a clean finish *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Rim Monster" we handle is a diamond cutter that balances cutting speed and finish. It features a design focused on cutting speed with reduced side resistance. With an optimal substrate thickness, it suppresses escape (lateral deviation) caused by decreased sharpness. It produces minimal vibration and provides a pleasant cutting feel, achieving monster-level sharpness. 【Features】 ■ Rim type without slits (cuts) ■ Minimal vibration and a pleasant cutting feel ■ Balances cutting speed and finish ■ Design focused on cutting speed with reduced side resistance ■ Optimal substrate thickness to suppress escape (lateral deviation) caused by decreased sharpness *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The 'Outstanding Cutting Performance' is a diamond cutter that can be used for cutting reinforced concrete (10mm rebar), granite, and blocks. It features a segment type with slits (notches). The cutting speed is fast, and the cooling effect is also high. Additionally, it is designed with a focus on cutting speed while reducing side resistance, and with an optimal base thickness to suppress deviation (side sway) caused by decreased cutting performance. 【Features】 ■ Segment type with slits (notches) ■ Fast cutting speed and high cooling effect ■ Utilizes short tips (multi-segment) ■ In the case of type 4, an astonishing 12 segments ■ Increased chip discharge, enhancing cutting stability ■ Optimal base thickness to suppress deviation (side sway) caused by decreased cutting performance *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Dolce Cup" is a product that balances strength and lightness by using a special resin substrate. It produces minimal metallic noise, reducing noise for both the operator and nearby individuals. Additionally, with a product weight of approximately 90g, it alleviates the burden of long hours of work. Leveraging the flexible performance of the resin substrate, it makes gentle contact with the workpiece. It does not dig in deeply, resulting in a clean finish. 【Features】 ■ Balances strength and lightness with a special resin substrate ■ Produces minimal metallic noise, reducing noise for the operator and nearby individuals ■ Extremely lightweight at approximately 90g, reducing the burden of long hours of work ■ Utilizes the flexible performance of the resin substrate for gentle contact with the workpiece ■ Does not dig in deeply, ensuring a clean finish *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We would like to introduce the "Tile Slugger" handled by Sankyo Diamond. It features a thin cutting edge and uses fine-grain diamonds for a beautiful finish. The thin substrate is reinforced with a metal stabilizer, providing a solid feel despite the thin blade. The blade thickness is 0.9mm, the outer diameter is 105mm, and the chip height is 5.0mm. Please feel free to contact us if you have any inquiries. 【Features】 ■ Thin cutting edge ■ Beautiful finish with fine-grain diamonds ■ Thin substrate reinforced with a metal stabilizer ■ Solid feel despite the thin blade *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Kuri~n Ta-kun Sanding Disk Self-Collecting Type" is a dust collection attachment for sanding disks. It achieves an astonishing dust collection capability without a dust collector, with a self-collection rate of over 80%. The spindle's power rotates the built-in large fan, sucking in dust particles. It allows for comfortable work even in places where a dust collector cannot be brought in or at high altitudes. 【Features】 ■ Built-in large fan for powerful dust collection ■ Astonishing dust collection capability without a dust collector ■ Self-collection rate of over 80% ■ Easy handling with a mesh bag with a belt ■ Clear visibility for a good working environment *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "NewSD High Bit" is a dry diamond bit that incorporates air release holes on the outer circumference of the bit body to reduce air pressure during cutting, thereby improving work efficiency. By using thermal spraying on the outer circumference of the bit body, it promotes the discharge of cutting debris. This reduces clogging and maintains a sharp cutting edge. Additionally, it features a protective chip inside the bit body that shaves off the core during cutting to expel debris. 【Features】 ■ Sharp cutting edge for quick penetration ■ Can create pilot holes for air conditioning systems and piping without using water ■ Dedicated design that pursues cutting ability and workability ■ Air release holes on the outer circumference of the bit body ■ Reduces clogging and maintains a sharp cutting edge *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Concrete Diamond Bit" is a drill bit that allows for quiet operation as it does not use vibration or impact modes that generate noise and vibration. You can easily drill holes by simply attaching it to your existing tools (such as an impact driver). It is capable of drilling edge holes and, due to its low impact, can penetrate easily in fragile areas. Being a dry type that does not use water, it minimizes mess on-site and is suitable for renovations. 【Features】 ■ Minimizes dust dispersion and allows for quiet drilling ■ Designed for rotation only, no impact needed ■ Easy drilling with an impact driver ■ Low impact, making edge drilling effortless ■ Dry type, no water treatment required, keeping the site clean *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Clean Taku-kun Grinding Self-Collecting Type" from Sankein Diamond Industry is a dust collection cover that powerfully collects dust with a built-in large fan, eliminating the need for a dust collector. The spindle's power rotates the built-in large fan, sucking in dust. It allows for comfortable work even in places where a dust collector cannot be brought in or at high altitudes. The mesh back with a belt can be worn around the waist, making it easy to handle. 【Features】 ■ Powerful dust collection with a built-in large fan ■ No need for a dust collector ■ Comfortable work in places where a dust collector cannot be brought in or at high altitudes ■ Mesh back with a belt can be worn around the waist *For more details, please refer to the PDF document or feel free to contact us.

• Concrete construction
• Stonework

The "Clean Taku-kun Grinding Tool" from Sanko Diamond Industry is an environmentally friendly product that absorbs grinding dust and other particles within the dust collector, leaving almost no residue outside. The flexible head structure allows for movement in all directions, while the soft brush adapts flexibly to the unevenness of the grinding surface, maintaining excellent adhesion even on irregular surfaces, demonstrating its effectiveness. The flat grinding and corner grinding attachments can be easily swapped out thanks to a powerful magnet. By replacing the tip cover with the corner plate, corner grinding can also be performed. 【Features】 ■ Excellent adhesion with flexible head + soft brush ■ Easy to hold type, suitable for corner work ■ Easy attachment and detachment with a one-touch powerful magnet ■ Strong suction structure ■ Unused tip covers and corner plates can be stored next to the main body *For more details, please refer to the PDF document or feel free to contact us.

• Concrete construction
• Stonework

The "Clean Taku-kun Cutting Hose Rest Type" from Sankyo Diamond Industry is a cutting dust collection cover that allows for comfortable work in places where dust collectors cannot be brought in or at high altitudes. The special design of the main body and the pads and flow guides inside the cover have significantly improved dust collection capability. By loosening the knob and sliding the sub-base to match the cutting depth scale, you can adjust the cutting depth. 【Features】 ■ Significantly improved dust collection efficiency ■ Cutting depth adjustment scale ■ Compatible with multiple models ■ Usable with dust collectors ■ Easy cutter switching mechanism *For more details, please refer to the PDF document or feel free to contact us.

• Reinforced concrete construction
• Concrete construction
• Stonework

The "Clean Taku-kun Cutting Tool" from Sanko Diamond Industry is an environmentally friendly cover that absorbs cutting dust and other particles into the dust collector, leaving almost no residue outside. It features a transparent cover that allows you to check the blade position while working. Additionally, the cutting depth can be easily adjusted with a butterfly bolt. The main body of the cover slides, enabling easy replacement of the cutter while it is attached. 【Features】 ■ Absorbs cutting dust into the dust collector ■ Usable with 100mm and 125mm disc grinders ■ Transparent cover that shows the blade position ■ Easy cutter replacement mechanism ■ Guide plate that supports cutting operations *For more details, please refer to the PDF document or feel free to contact us. *Dust collection efficiency may vary depending on working conditions.

• Stonework
• Tile work
• Concrete construction