KJTD List of Products and Services

The HIS5 MF wideband ultrasonic flaw detector is a next-generation ultrasonic testing device that connects to a PC for use. It features an A-scope memory function and enables high-resolution waveform capture through high-speed LAN communication, allowing for waveform analysis and post-evaluation. We will propose functions that meet our customers' needs in combination with our proprietary software.

• Other measuring instruments

Introducing the 128-channel parallel-driven high-speed phased array testing system! Flash Focus supports ultrasonic testing of special materials that were difficult to test conventionally and in special environments that require high testing speeds. With high-speed and high-precision testing, it backs up the high quality assurance that is required.

• others

The "Portable Ultrasonic Flaw Detector USFD-20" features a lightweight design with a total weight of approximately 840g, including the battery. It is equipped with a 2-hour monitor waveform recording function and various wizards tailored to the specimen to support proper operating procedures. This ultrasonic flaw detector can be conveniently used in various locations. It has been certified as an acceptable flaw detector for the practical examination of UT qualifications conducted by the Japan Non-Destructive Testing Association and the Steel Structure Technicians Training Center. <Usage Scenarios> ■ Cracks, fusion defects, and poor penetration in welds ■ Internal cracks, inclusions, and delamination in products <Features> ■ Compact and lightweight (840g including battery) ■ 5.7-inch large screen with anti-glare filter ■ Various wizards implemented to match the specimen ■ 2-hour monitor waveform recording function * A video explaining this product is also available below. * The document includes detailed specifications as well.

• Steel construction

The Thermo Inspector is an active thermography inspection device that uses an infrared camera along with excitation devices such as flash lamps and heaters to detect flaws in materials. It allows for non-contact inspections, and data acquisition can be performed in a very short time. Our proprietary software enables various analyses, such as graphing temperature changes and displaying phase analysis results, making it useful not only for inspections but also for research on the thermal properties of materials. Additionally, the Thermo Inspector comes in various forms, including portable models, small tabletop types, and large tabletop types, allowing us to propose equipment configurations tailored to your needs. 【Fields】 ◆ Automotive parts ◆ Aircraft parts ◆ Electronic components ◆ New material development (composites) ◆ Building wall surfaces 【Features】 ◆ Non-contact inspection ◆ Quick inspection capability ◆ Choice of camera models ◆ Dedicated analysis software for material property research 【Application Examples】 ◆ Detection of delamination in CFRP ◆ Internal structure analysis of composite materials ◆ Detection of internal defects in other materials ◆ Inspection of metal joints and welds ◆ Inspection of building exteriors *For more details, please download the PDF.

• Rock drills, demolition machines, and excavators

Methods for recording images without damaging the internal structure of materials include X-ray testing and ultrasonic testing. Our company has developed an ultrasonic testing imaging device that combines ultrasonic testing with image processing equipment. The ultrasonic testing imaging device has achieved results in a wide range of applications, such as detecting cracks inside semiconductors, distinguishing between adhesion and delamination, detecting voids in new materials like fine ceramics and composite materials, as well as final inspections of processed parts used in aircraft and inspections of joints with dissimilar metals. D-view (Desktop ultrasonic view-system) is a desktop-type ultrasonic testing imaging device designed for easy setup in laboratories or offices, featuring a space-saving design. It inherits the user-friendly features and comprehensive data processing software of our well-established SDS series high-performance ultrasonic scanners, making it applicable for material inspections across various fields. Of course, it is equipped with our newly developed high-frequency compatible ultrasonic tester "HIS3."

• Non-destructive testing

ULTECT21 is a multi-channel ultrasonic flaw detector that supports online automatic flaw detection. It comes standard with essential features for automatic flaw detection, such as blanking control, marker shift, I/O remote control, and line speed measurement, making it suitable for inspecting materials flowing rapidly on manufacturing and production lines (this device is an electrical component, but we also design and manufacture the mechanical parts to meet customer needs, so please inquire). It is a standard 8-channel multi-channel ultrasonic flaw detector, and expansion is possible with options.

• Rock drills, demolition machines, and excavators

In ceramic piezoelectric elements, it was difficult to use high frequencies for flaw detection (over 25 MHz) and to detect surface micro-cracks using high-damping pulse waves. However, we demonstrate excellent performance in response to increasingly sophisticated inspection demands. We offer a lineup of frequencies ranging from 20 MHz to 125 MHz. Please feel free to consult us regarding probes with frequencies below 20 MHz.

• Non-destructive testing

The highly praised SDS has become compatible with Windows 10 and is now even easier to use. With the inclusion of the high-speed, wide-band ultrasonic flaw detector HIS3, it can cover materials ranging from thin to thick. All settings of the flaw detector can be remotely operated from a Windows PC, and the software comes standard with extensive image analysis capabilities. The mechanical components can be customized to meet the specific needs of the customer.

• Rock drills, demolition machines, and excavators

By detecting ultrasonic waves generated in various equipment or artificially produced ultrasonic waves, abnormalities, wear conditions of the equipment, or the airtightness of products can be examined.

• Rock drills, demolition machines, and excavators

An infrared camera adapted to the GigE Vision camera communication protocol, enabling high-speed image transfer over GigE Ethernet. Its compatibility with GenICam allows for easy integration into common systems. By connecting a PC with the software installed to the camera, real-time images can be viewed instantly. Gigabit Ethernet allows for the transfer of images at up to 60Hz and 16 bits.

• Rock drills, demolition machines, and excavators

PDS is a flaw detection imaging device equipped with a phased array ultrasonic flaw detector. Utilizing the advantage of being able to use multiple elements simultaneously, it enables high-speed inspection even for large structures. The inspection results are displayed as images, making analysis and other tasks easy to perform.

• Rock drills, demolition machines, and excavators

High precision ・ High performance This is a thickness and inner/outer diameter measurement device compatible with online inspection. ■ Standard features necessary for automatic flaw detection The "HSC308/308DM" is a multi-channel thickness measurement/inner and outer diameter measurement device that supports automatic inspection online. Unlike the analog method that depends on environmental temperature, the thickness measurement method uses a digital counter, enabling stable measurements. Additionally, various online functions (blanking control, analog/event, marking shift output, simple chart function, pass/fail judgment function, measurement value jump prevention function, etc.) are equipped as standard.

• Rock drills, demolition machines, and excavators

Sherlog MATE can conduct airtightness (wind and rain tightness) tests of ship hatch covers by detecting artificially generated ultrasonic waves. It is currently being used as a new inspection method to replace the hose test.

• Non-destructive testing

The ADS71000 is an ultrasonic testing imaging device that incorporates the latest ultrasonic testing technology, mechanical control technology, and image processing technology. In our conventional ultrasonic testing imaging devices, it was impossible to continuously inspect so-called three-dimensional surfaces. Therefore, this device enables simultaneous control of seven axes (X, Y, Z, R, θ1, θ2, θ3) through a motion controller, allowing for three-dimensional scanning of the probe and making it possible to inspect complex shapes of test specimens that were previously impossible. 【11 Features】 ● Simultaneous control of 7 axes ● Automatic generation of scanning patterns using CAD data ● A-scope memory function (stores scanning coordinate data and A-scope for that point) ● Remote controller with A-scope display function ● Real-time C, B, D scope display using gate data ● Real-time C, B, D scope display using A-scan data ● Defect detection, temporary pause function for testing during abnormal echo monitoring, and continuation function ● 3D display during data analysis ● Masking function for box, polygon, and ellipse cursors ● Defect discrimination function ● 3D beam profile measurement function

• Rock drills, demolition machines, and excavators

The Thermo Inspector is an active thermography inspection device that uses an infrared camera along with excitation devices such as flash lamps and heaters to detect flaws in materials. It allows for non-contact inspection, and data acquisition can be performed in a very short time. Our proprietary software enables various analyses, such as graphing temperature changes and displaying results of phase analysis, making it useful not only for inspections but also for research on the thermal properties of materials. 【Fields】 ◆ Automotive parts ◆ Aircraft parts ◆ Electronic components ◆ New material development (composites) ◆ Building wall surfaces 【Features】 ◆ Non-contact inspection ◆ Quick inspection possible ◆ Choice of camera models ◆ Dedicated analysis software for material property research 【Application Examples】 ◆ Detection of delamination in CFRP ◆ Internal structure analysis of composite materials ◆ Detection of internal flaws in other materials ◆ Inspection of metal joints and welds ◆ Inspection of building exteriors *For more details, please download the PDF.

• Rock drills, demolition machines, and excavators

Relative bandwidth (-6dB): 60-90% Acoustic impedance is close to water and plastic Waterproof stainless steel housing, suitable for use even in immersion testing

• Non-destructive testing

PA6 was born as the successor to PA4 and PA5, which have a wealth of implementation experience in industries such as steelmaking, non-ferrous metals, railways, and new materials. Compared to previous models, the sampling frequency and maximum cycle count have been enhanced, enabling a wider range of ultrasonic testing. Additionally, with support for 1000BASE-T, it has become possible to communicate large volumes of testing data more quickly and stably.

• Non-destructive testing