ウォーターナビ List of Products and Services

The "NEW Aqua Transfer" is a micro-nano bubble generation device that pursues a structure free from clogging while boldly achieving compactness. Thanks to improvements in the structure of the gas chamber, it can withstand use in environments with a high presence of foreign substances, such as suspended solids (SS). Additionally, we offer a device called "Gas Controller" to fine-tune the gas suction volume, allowing for precise adjustments of the particle size and concentration of the generated micro-nano bubbles. 【Features】 ■ Freedom from clogging ■ Resistant to corrosion ■ Compact design ■ Reproducible operation ■ Models: Available in six types depending on diameter *For more details, please refer to the PDF materials or feel free to contact us.

• Drainage and ventilation equipment

The "AT Compo" comes in two types: "submersible pump type" and "land-based pump type," allowing for differentiation based on application and installation conditions. The "submersible pump type" is an integrated system that combines three components: the Aqua Transfer (micro-nano bubble generation nozzle), submersible pump, and gas volume control device. By combining pumps with suitable capacities based on the size and material of the nozzle, it can be utilized for various applications. 【Features】 - Comes with a vacuum gauge and gas volume control valve (needle valve), enabling reproducible operation. - The Aqua Transfer nozzle is available in six sizes, with water passage diameters ranging from φ5mm to φ50mm, allowing selection based on the size of the tank and load. - The standard Aqua Transfer nozzle is made of corrosion-resistant stainless steel (SUS316). - For use in more corrosive environments, such as seawater, options made of Teflon (PTFE) are also available. *For more details, please refer to the PDF materials or feel free to contact us.

• pump

The "Spinor(R) II" is a device that generates micro-nano bubbles using the rotation of a motor without the need for a pump. In addition to being compatible with the micro-nano bubble generation of ozone gas and other gases, it features a support angle at the top of the device, allowing for easy installation in tanks and similar setups. It can be used immediately after powering on. Moreover, since the gas suction route is independent, it is possible to replace it with corrosion-resistant materials suitable for the gas being used. 【Features】 ■ Energy-saving design with a compact motor ■ Uniform fine bubbles ■ Strong discharge power for dispersing micro-nano bubbles ■ Motor heat does not transfer to the water ■ Air volume can be finely adjusted in a stepless manner *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Water Treatment Plant

We would like to introduce a case where a micro-nano bubble generation device, "Aqua Transfer," was installed at a certain farm in Yamaguchi Prefecture to solve a problem. Growing vegetables requires a large amount of water, so it is common to use groundwater. However, in cases where organic matter has accumulated in the soil, the organic matter consumes dissolved oxygen, resulting in the extracted groundwater becoming low in oxygen, which has been one of the causes of poor vegetable growth. By installing our product, we were able to spray water containing oxygen micro-nano bubbles onto the soil, resulting in darker leaves for snap peas and mini tomatoes, better flower bud formation, faster growth, and increased harvest yields. [Case Overview] ■ Issues - Growing vegetables requires a large amount of water, so it is often common to use groundwater. - Organic matter consumes dissolved oxygen, causing the extracted groundwater to become low in oxygen, which has been one of the causes of poor vegetable growth. - Care must also be taken with the amount of water given to the vegetables, as giving too much water at once can lead to root rot. *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

Amid the frequent occurrence of natural disasters, it has been said that urgent disaster prevention measures are necessary due to damage caused to houses, public facilities, and farmland from the collapse of priority agricultural reservoirs. It has been determined that emergency measures are needed for 1,540 reservoirs nationwide in preparation for future heavy rains and typhoons. The "solidification treatment material 'CAS'" is suitable for such urgent construction. 【Features of our solidifying agent】 ■ The solidification speed can be freely determined ■ When used as an additive in concrete, it is less likely to cause bleeding ■ It serves as a crack prevention measure for cold-weather concrete ■ The strength and pH of the residual soil and sludge after treatment are sufficient, allowing it to be processed as quality soil *For more details, please download the PDF document or feel free to contact us.

• others

We will introduce a case where the combination of the land-based pump type "AT Compo" and the biological filtration material "Accela" solved issues in a shrimp farming facility. In land-based aquaculture, it is typically conducted in tanks with sand, but the number of shrimp that can be raised is limited by the tank's surface area, leading to inefficiencies. After installing the "AT Compo" and "Accela," a comparison of shrimp growth four months after the start of the experiment showed a clear difference. [Case Overview] ■ Issues - The aquaculture density is determined by the tank's surface area, resulting in wasted upper space and inefficiency. *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Water Treatment Plant

We will introduce a case where a biological deodorization device, "DeoClean," was installed in an agricultural village wastewater treatment facility being constructed in a rural area to solve issues. In conventional biological deodorization devices, the degradation of the biological carrier can lead to a "compacted state," resulting in poor air permeability, causing short-circuiting, and allowing untreated odors to leak outside. Due to seasonal changes, the drying condition of the carrier varies, necessitating adjustments to the watering time. "DeoClean" addresses the problems faced by conventional biological deodorization devices by using Accelera (a glass foam material) as the deodorization carrier. 【Case Overview】 ■ Issues - Conventional biological deodorization devices experience a "compacted state" due to the degradation of the biological carrier, leading to poor air permeability, short-circuiting, and the leakage of untreated odors outside. - Seasonal changes in the drying condition of the carrier required adjustments to the watering time. *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures

Attention to managers of lakes, ponds, and castles in local governments, as well as golf courses! This is a must-see for facilities receiving complaints about scenery and unpleasant odors from nearby residents and tourists! The "AT Compo" is a micro-nano bubble generation device that combines an ejector-type aqua transfer nozzle with a pump. Depending on the type of pump used, there are two types: "submersible pump type" and "land pump type." The "submersible pump type" is easy to carry and can be used anywhere as long as there is a power source. The "land pump type" is easy to maintain since the pump is located on land. 【Features】 ■ Restoration and maintenance of scenery ■ Reduction of odor problems ■ Available in two types: "submersible pump type" and "land pump type" ■ Easy to carry and can be used anywhere with a power source (submersible pump type) ■ Easy maintenance (land pump type) *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

This is a must-see for companies starting plant factories (hydroponics) and farmers engaged in soil cultivation, including greenhouse cultivation! The "AT Compo" is a micro-nano bubble generation device that combines an ejector-type aqua transfer nozzle with a pump. Depending on the type of pump used, there are two types: "submersible pump type" and "land pump type." The "submersible pump type" is easy to carry and can be used anywhere as long as there is a power source. The "land pump type" is suitable for use in hydroponics where water temperature management is important. 【Features】 ■ Shortens cultivation period due to growth promotion effects ■ Reduces fertilizer usage ■ Increases added value of agricultural products ■ Available in two types: "submersible pump type" and "land pump type" ■ Easy to carry and can be used anywhere with a power source (submersible pump type) ■ Well-suited for use in hydroponics where water temperature management is crucial (land pump type) *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

Attention land-based aquaculture operators, especially companies starting land-based aquaculture due to new entries. The "AT Compo" is a micro-nano bubble generation device that combines an ejector-type aqua transfer nozzle and a pump. Depending on the type of pump used, there are two types: "submersible pump type" and "land pump type." The "submersible pump type" is easy to carry and can be used anywhere as long as there is a power source. The "land pump type" is suitable for use in seawater fish farming tanks. 【Features】 ■ Shortens the farming period due to growth promotion effects ■ Reduces farming losses due to stress relief effects ■ Available in two types: "submersible pump type" and "land pump type" ■ Easy to carry and can be used anywhere as long as there is a power source (submersible pump type) ■ Well-suited for use in seawater fish farming tanks (land pump type) *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

We will introduce a case where the micro-nano bubble generation device "AT Compo (land pump type)" was installed at a water supply company to solve issues. Every summer, the demand for eel increases in the Kansai region. Natural eel caught in the Seto Inland Sea is placed in a land-based tank for shipping adjustments before being sent to market. However, due to rising water temperatures and overcrowded tanks during the summer, about 10% of the eels typically die each year. After the installation of the "AT Compo," there were no deaths among the eels. [Case Overview] ■ Issues - Eels start to die when seawater temperatures exceed 25°C, with around 10% dying each year. - When the catch is high, a large number of eels are placed in small tanks, leading to stress from overcrowding and injuries from vigorous swimming against the tank walls or rubbing against each other, which can result in death. *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

We would like to introduce a case where a micro-nano bubble generation device "AT Compo (submersible pump type)" was installed at a machine tool manufacturer to solve a problem. In the newly constructed logistics center, a rainwater storage tank was built as a water source for watering the plants. Since the logistics center is surrounded by trees, the rainwater storage tank became eutrophicated due to the infiltration of fallen leaves and dust, leading to the proliferation of algae, which negatively impacted the landscape. In early July four years ago, after installing the "AT Compo," the algae that had densely covered the water surface was completely eliminated within ten days. [Case Overview] ■ Issues - Fallen leaves and dust infiltrated the rainwater storage tank, causing algae to cover the water surface during the summer when sunlight increased. - In the autumn, when temperatures dropped, the algae died, leaving their remains floating on the surface, causing foul odors and clogging the watering nozzles. *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

The natural world has a stable circulation system that, even when disturbances occur, has the power to incorporate those singularities back into the system and return to its original state. However, if this restorative ability is exceeded, it can lead to the destruction or dysfunction of the circulation system. Until now, using large amounts of microorganisms and chemicals has required significant costs and effort, and the effects have been temporary, posing many challenges to the ecosystem. "Bio Reverse" is a natural activation water that, unlike traditional temporary treatments, activates the self-purification ability inherent in nature to sustainably restore the natural state. 【Features】 ■ No need for capital investment; can be implemented immediately ■ Simple and relies on the natural circulation system ■ Increases yield without relying on fertilizers (feed), varieties, or chemicals ■ Increases profits through high-value-added production *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Water Treatment
• Other biomass

"DeoClean" is a maintenance-free new biological deodorization device that efficiently decomposes and removes odor components through the action of bacteria and microorganisms. By using a glass foam material called Accelra as the deodorization medium, it maintains stable performance over a long period. Additionally, since the medium does not excessively retain moisture, irrigation control is easy. There is no need for regular tilling like with fiber or plant media. We also offer a compact deodorization device called "DeoClean Mini," developed for odor prevention in combined sewage treatment tanks. 【Features】 ■ No compaction occurs ■ Easy management of medium irrigation ■ No need to till the medium ■ No short-circuiting ■ Eco-friendly product made from recycled glass ■ Cost-effective *For more details, please refer to the PDF materials or feel free to contact us.

• Sanitary fixtures
• others

The "New Type Spinor" is a disc rotor-type micro-nano bubble generator that adds new features to the convenience of the old type Spinor. The old model could not suction gases other than air due to its structure, but by providing an independent gas passage to the outside, it can now accommodate various gases such as ozone, oxygen, and carbon dioxide. By turning the "Gas Volume Adjustment Valve," you can finely adjust the amount of gas being suctioned, allowing you to easily set the size and concentration of the generated microbubbles. 【Features】 ■ Generates micro-nano bubbles from various gases ■ Continuously adjustable bubble size and concentration ■ Uniform microbubbles ■ Resistant to corrosion ■ Not affected by water temperature ■ Easy installation *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

"Accel" is an eco-friendly product made from glass that has been used as containers for seasonings and drinking water from households. These waste glasses are crushed into fine cullet, mixed with calcium, and then fired at a high temperature of about 1,000 degrees to manufacture the product. It is a foamed glass with a deeply porous structure. 【Features】 ■ Porous structure ■ Interconnected voids ■ Free of heavy metals ■ Adjustable specific gravity *For more details, please refer to the PDF document or feel free to contact us.

• others

"Aqua Transfer" is a micro-nano bubble generation device that employs an ejector method. It is composed of a "microbubble generation nozzle," "air supply unit," and "pressurized pump," and is made of SUS316 material, making it resistant to corrosion and highly durable, allowing for use in seawater. Additionally, by combining it with the air supply unit, the particle size of the generated bubbles can be easily adjusted through the adjustment of the needle valve. 【Features】 ■ High efficiency in oxygen supply capacity ■ Powerful cleaning effect ■ Safe as it does not use chemicals ■ Simple structure ■ Resistant to clogging ■ Corrosion-resistant material *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

"CAS" is an abbreviation for Carbonated-Aluminate Salts, which can be broadly categorized into water treatment coagulants (CAS agents) and sludge solidification agents (CAS materials). The materials are selected and used based on the treatment target and the final disposal form. They are widely utilized in water treatment facilities, including sewage treatment plants, as well as in civil engineering sites such as tunnels and bridges. 【Features of Solidification Treatment】 ■ The solidification speed can be freely determined. ■ When used as an additive in concrete, it is less likely to cause bleeding. ■ It serves as a crack prevention measure for cold-weather concrete. ■ The strength, pH, and other properties of the residual soil and sludge after treatment are sufficient, allowing for processing as high-quality soil. *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment
• Turbid water and muddy water treatment machines
• Ground improvement materials

The "AT Compo" is a micro-nano bubble generation device that combines an aqua transfer, a pressurizing pump, and an air supply unit, making it easy to carry around. It can be used simply by connecting the power supply and adjusting the air volume. We also offer options for seawater use combined with a titanium underwater pump. It is lightweight enough to be carried with one hand, allowing for easy use anywhere. 【Features】 ■ Easy operation ■ Extensive seawater specifications ■ Effortless portability *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment

The "Aqua Transfer" is a fine bubble generation device using an ejector method that can control the amount and diameter of bubbles generated by adjusting the capacity of the combined pressurization device (pump) and the volume of air. This product ejects bubbles vigorously (at 20 m/s) from the tip of the nozzle, allowing it to reach every corner of large water bodies such as ponds and dams. 【Examples of Use】 ■ Canal in Hangzhou, China ◎ Environmental improvement experiment in a closed water area ■ Eel cultivation tank ◎ Cultivation of natural eels for about one week *For more details, please refer to the catalog or feel free to contact us.

• Water Treatment
• Water Treatment Plant

"Aqua Transfer" is an ejector-type fine bubble generation device that can control the amount and diameter of bubbles generated by adjusting the capabilities of the combined pressurization device and the air volume. Since bubbles are ejected vigorously from the nozzle tip (20 m/s), it is possible to distribute them thoroughly even in large bodies of water such as ponds and dams. This effect, which acts over a wide area, has been successfully used in canals and fish farming tanks in Hangzhou, China. 【Features】 ■ Ejector system ■ Control of bubble generation amount and diameter through pressurization device ■ Suitable for large bodies of water ■ Wide range of applications *For more details, please refer to the catalog or feel free to contact us.

• Water Treatment