能重製作所 List of Products and Services

Our company has been engaged in the design and manufacturing of hardware for construction for over 50 years. "Special Hardware for Steel Framing" 01_Clip 02_Hanger 03_Joint 04_Cross Bracket 05_Bracing Hardware 06_Brace Hardware 07_Earthquake Resistance Reinforcement Hardware 08_Suspension Hardware 09_Deck Suspension Hardware 10_Others (such as angle pieces and hardware for dropped ceilings) *You can view all pages from the "PDF Download" below. *For requests for the printed catalog, please contact us using the inquiry form below. We will deliver it free of charge. ***Currently, we do not sell directly to customers with whom we do not have a business relationship.*** Please place your orders through nearby lightweight steel framing manufacturers or trading companies. If securing a procurement route is difficult, please feel free to contact us. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊

• Metallic base

【Popular Products】 1) Wind Pressure Resistant Clip - Simple and easy-to-use seismic ceiling wind pressure resistant clip - Stock available for C-38 and C-40x20 - Stainless steel version available for C-38 - Material is high corrosion-resistant galvanized steel sheet - Can be overlapped with general clips for renovation work (seismic reinforcement) 2) Push-Up Type Wind Pressure Resistant Clip - Features an M6 bolt integrated on one side of the clip, providing good workability for seismic clips - Plate thickness 1.6mm = "Push-Up Type 1" high corrosion-resistant galvanized steel sheet - Plate thickness 1.2mm = "Push-Up Type 2" hot-dip galvanized steel sheet (The push-up type varies in material based on plate thickness) 3) Pair Lock Clip - Two clips of the same shape are paired to sandwich C-38, simply pushed in with fingers (a seismic clip that does not use bolts) - Plate thickness 1.6mm = "Type 1" hot-dip galvanized steel sheet - Plate thickness 1.2mm = "Type 2" hot-dip galvanized steel sheet

• Metallic base

【Popular Products】*All are screw-fixed types 1) Wind Pressure Resistant Hanger - High corrosion-resistant galvanized steel plate, thickness 2.0mm, seismic ceiling wind pressure resistant ceiling hanger - Stock available for C-38 and C-40x20 - Stock available for 3-minute and 4-minute types 2) Strong Hanger - High-strength hanger with thickness 3.2mm, width 30mm, height 80mm - Stock available for C-38 and C-40x20 - Stock available only for 3-minute type (4-minute type is made to order) - Material is hot-dip galvanized steel plate 3) LG Hanger (for light gauge) - For 65x30 (also compatible with 60x30) - For 75x45 - For 100x50 - Stock available for both 3-minute and 4-minute types - Material is hot-dip galvanized steel plate (High corrosion-resistant galvanized steel plate can be used for made-to-order production)

• Metallic base

Our vibration-damping rubber comes in two types, and the performance of each type is as follows: 1) NOJU Vibration-Damping Rubber [NJ-22R] (the larger vibration-damping rubber) Static spring constant: 66N/mm Applicable load range: 50–220N Permissible load: 220N (22kgf) 2) NOJU Vibration-Damping Set Rubber [NJ-10R] (the smaller vibration-damping rubber) Static spring constant: 70N/mm Applicable load range: 30–100N Permissible load: 100N (10kgf) * The [NJ-10R] is a set of vibration-damping rubbers with different shapes for the top and bottom. Please pay attention to the orientation when reassembling the rubber if it comes loose before installation.

• Metallic base
• Anti-vibration rubber

【Our Original Products】 1) Wind Pressure and Seismic Joint (for C-38 and C-40) 〈Features〉The joint part of the furring channel is sandwiched with metal fittings, providing strength in the out-of-plane direction, making it ideal for wind pressure-resistant ceilings and seismic ceilings. - In stock for C-38 and C-40x20 - Material: High corrosion-resistant galvanized steel plate (Thickness: C-38 = 1.2mm, C-40 = 1.6mm) 2) Parallel Cross Joint (for C-40x20x10 and C-60x30x10) 〈Features〉This fitting allows for easy joining of cross furring channels when assembling C-shaped steel furring in a grid for metal panel ceilings, etc. - Available in two types: for intermediate sections and for end sections - In stock for C-40x20x10 - Made to order for C-60x30x10 (please inform us of the thickness of the C-shaped steel to be used) - Material: High corrosion-resistant galvanized steel plate (Thickness: 2.0mm)

• Metallic base

【Popular Products】 1) Cross Stop Bracket - A bracket that fixes C-shaped steel in a cross formation vertically and horizontally. - Clips for C-shaped steel (for seismic ceilings, wind-resistant ceilings, metal panel ceilings). - Used when C-shaped steel is applied to furring channels and furring in metal panel ceilings, etc. - Stock available for 60x30 and 40x20 sizes. - Other sizes can also be produced to order. - Custom production for the upper side to fit square pipes is also possible. - Material is high corrosion-resistant galvanized steel plate. 2) Cross Bracket - A bracket that fixes C-shaped steel in a cross formation vertically and vertically. - Stock available for 65x30 (compatible with 60x30) and 40x20 sizes. * The 40x20 size can also be used with channel 40x20 without a lip, but please install the additional channel 40x20 on the upper side. - Other sizes can also be produced to order. - Material is hot-dip galvanized steel plate.

• Metallic base

【Popular Products】 1) Bolt Holder 〈A fitting to secure 3-inch hanging bolts and various horizontal reinforcement materials〉 - Simple shape (fixed with two screws) - Can also secure horizontal reinforcement materials at an angle - For seismic ceilings 2) Channel Holder 〈A fitting to secure various hanging bolts and horizontal reinforcement materials for channels〉 - For C38: 3-inch (also compatible with 2-inch) - For C38: 4-inch (also compatible with 5-inch, M16) - For C25: 3-inch (also compatible with 2-inch) - For C19: 3-inch (also compatible with 2-inch) 〈A fitting to secure various hanging bolts and horizontal reinforcement materials for C-shaped steel〉 - For C-65x30 (compatible with 3-inch and 4-inch) - For C-60x30 (compatible with 3-inch and 4-inch) - For C-40x20 (compatible with 3-inch and 4-inch) - Other sizes can also be custom-made upon order

• Metallic base

【Popular Products】*For upper use (both can be fixed without raising to the suspension point) 1) G Brace - Angle fixed at 45° - Simple and easy to use - Available in 3-inch and 4-inch sizes 2) One-Touch Brace 3-inch - Angle adjustable (angle can be adjusted from 0 to 60° from the horizontal plane) - One-touch installation (no need to twist the brace material) - For 3-inch only *After hooking the hardware onto the upper part of the suspension bolt, open the brace material and secure the lower part of the brace material with screws to the support, etc. However, if there are pipes or ducts in the position where the brace material needs to be opened, it may not be possible to open the brace material, so please check the equipment in advance.

• Metallic base

【Popular Products】 1) Special LG Hook Reinforcement Fitting - A fitting that reinforces the "Special LG Hook" suspension fitting - Simple and easy to install - Fixed with screws pressed against the underside of the "Special LG Hook" 2) Hug Lock S/W - A fitting that improves the horizontal load capacity in the direction of the horizontal members, such as wind pressure (seismic) clips - Used for reinforcing clips near braces - Available in two types: for S bars and for W bars - Compatible with both C38 and C40 horizontal supports - Comes in pairs (same shape) - The fitting is aligned with the horizontal support, sandwiching the clip, and fixed with two included screws - Can also be installed on our "Wind Pressure Clip Push-Up Type" - For seismic ceilings and wind pressure ceilings

• Metallic base

【Popular Products】 1) LG Hook - For C-shaped steel - Simple and easy to install - Can be installed without going up to the suspension point - Hook the hardware onto the lip of the C-shaped steel and tighten the suspension bolt to secure it - Available for 3-inch and 4-inch sizes 2) Slide LG Hook - For C-shaped steel - Integrates "Special LG Hook" and "Special LG Hook Reinforcement Hardware" with rivets - Easy installation as temporary fixing can be done on the "Special LG Hook" side - Finally, slide the "Special LG Hook Reinforcement Hardware" side up and secure with screws - Available only for 3-inch size 3) H Steel Grab - Compatible with C-shaped and H-shaped steel - Hardware that can be directly fixed with screws to H-shaped steel (up to 12mm flange thickness) - Easy installation as temporary fixing can be done with the upper M5 bolt before screw fixing - Available for 3-inch and 4-inch sizes - For seismic-resistant ceilings and wind pressure-resistant ceilings 4) H Steel Grab [Free] - Compatible with C-shaped and H-shaped steel - Hardware that includes pendulum components with the "H Steel Grab" - Pendulum components can be installed in both the orthogonal and parallel directions of the base material! - Maximum slope of 60 degrees - Available for 3-inch and 4-inch sizes

• Metallic base

【Popular Products】 1) MA Deck Exclusive Hanging Bracket (Suppon-kun) ■ Meiji Kogyo / MA Deck for MA50, 75 ・The structure allows the bracket to embed into the deck when the hanging bolt is tightened. 2) Deck Hanger QL Type [NJ-QL] ■ JFE Building Materials / QL Deck for QL50, 75 ・Excellent workability ・Simply push the bracket in and tighten the hanging bolt. 3) Deck Hanger SE Type [NJ-SE] ■ Nippon Steel Building Materials / Super E Deck for EZ50, 75 ・Easy installation ・Just insert the tip of the bracket into the groove of the deck and tighten the hanging bolt. All three products are for composite slab decks. * Do not use before concrete pouring. * For vertical hanging only. Diagonal hanging is not possible. * Use a tool such as an impact driver to securely tighten the hanging bolts.

• Metallic base

【Popular Products】 1) Runner Spacer - For fixing staggered intermediate columns (fire-resistant and soundproofing method) - Recommended product by Yoshino Gypsum Co., Ltd. - Stock sizes (mm): 10, 15, 20, 25, 30, 35, 50 - Other sizes can be custom ordered from 9 to 60mm in 1mm increments. 2) Opening Reinforcement Mounting Bracket L-3.2x35x30 L=35 (4-5.5φ, 2-10φ) L-3.2x35x30 L=50 (4-5.5φ, 10φ, 14φ) L-4.5x50x50 L=50 (4-5.5φ, 10φ, 1-14φ) L-4.5x50x50 L=75 (4-5.5φ, 10φ, 1-14φ) 3) Multipurpose Mounting Piece L-2.3x50x50 L=50 (6-4.5φ) L-3.2x50x50 L=50 (6-5.5φ) L-4.5x50x50 L=50 (6-5.5φ)

• Metallic base
• System ceiling

***We do not sell directly to customers with whom we currently have no transactions.*** Please place your orders through nearby lightweight steel frame manufacturers or trading companies. If securing a procurement route is difficult, please feel free to contact us. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ Our company operates a "one-stop production system" that allows us to handle everything from planning and development to manufacturing and shipping of a wide range of products, primarily focusing on the production of building-related hardware. Custom products are mainly processed at our Yashio factory. We are equipped with facilities such as turret punch presses, benders, and presses to accommodate short delivery times. Additionally, processes that we do not have in-house (such as plating) can be handled by partner factories, allowing us to collectively accept processing for all types of base materials. For more details, please refer to our catalog "Custom Products Handbook" or feel free to contact us.

• Metallic base

***We do not sell directly to customers with whom we currently have no transactions.*** Please place your orders through nearby lightweight steel frame manufacturers or trading companies. If securing a procurement route is difficult, please feel free to contact us. ＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊＊ <All R-processed products are made to order> We accommodate various sizes, R dimensions, and types of orders for R processing of base materials such as curved walls, R walls, and dome ceilings. The minimum R dimension varies depending on the "bending method," even for the same component. Examples of "bending methods": - Standard bending (horizontal bending) - Tapered bending (outer blade bending) - Reverse tapered bending (inner blade bending) Others For more details, please refer to the catalog or feel free to contact us.

• Metallic base