イワブチ List of Products and Services

The 'Non-Falling Net' is a product that can be installed while leaving the existing ceiling intact, complying with the 'fall prevention measures for existing ceilings' as stipulated by the Building Standards Act Enforcement Order. It offers a short construction period and low cost compared to ceiling removal or the installation of seismic ceilings. *Our company is a designated sales agent for this product. If you have any questions or uncertainties regarding fall prevention measures for specific ceilings or aging countermeasures, please feel free to contact us. 【Features】 ■ Short construction period, low cost ■ Strength calculations based on the Ministry of Land, Infrastructure, Transport and Tourism's calculation methods are possible ■ Unique clamp and wire installation method ■ Options for net color and mesh size ■ Effective as a fall prevention measure for roof substrates If you have any questions, please do not hesitate to contact us.

• Renovation and repair methods

This product is a mounting bracket compatible with equipment that can be installed with a diameter of φ100 to φ410. By changing the band, it can be installed with a diameter of φ100 to φ410, and the pitch of the mounting holes (M8) accommodates 120mm and 170mm. It is a common mounting bracket for both the upper and lower parts. 【Features】 ■ Can be installed with a diameter of φ100 to φ410 by changing the band ■ The pitch of the mounting holes (M8) accommodates 120mm and 170mm ■ Common bracket for both upper and lower parts *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

This product is a mounting bracket for small-diameter poles that can be securely attached with an M12 bolt. It is applicable for 40A to 90A (φ48.6 to φ101.6) and can be installed safely and easily without removing the nut. The pitch for the mounting holes (M8) accommodates 120mm and 170mm. It is a common bracket for both the upper and lower parts. 【Features】 ■ Can be securely attached with an M12 bolt ■ Can be installed safely and easily without removing the nut ■ The pitch for the mounting holes (M8) accommodates 120mm and 170mm ■ Can be installed for 40A to 90A (φ48.6 to φ101.6) ■ Common bracket for both the upper and lower parts *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

【Features】 ◆ The cushion part is made of non-absorbent, highly elastic polyethylene independent foam. ◆ A wide range of heights available: 800, 1,000, 1,500, and 2,000 mm. ◆ The band attachment area is reinforced with grommet processing. Please use the installation band in combination with our stainless steel band (SFT-10mm type).

• Safety and consumables

【Features】 ◆ Can be used as a scaffold for work and elevation. ◆ The step area is treated with anti-slip processing. ◆ Please use in combination with the separately sold bolt set for steel column scaffold fittings 'ATFF-BNW'. Equal angle steel sizes ATFF-65-BNW L65×65 ATFF-75-BNW L75×75 ATFF-90-BNW L90×90

• Support hardware/opening hardware

【Features】 ◆ Can be used as a working platform around transformers, and as a climbing platform in locations where existing scaffold bolts make ascent and descent difficult. ◆ The step area is treated with anti-slip processing. ◆ Please use in combination with the IBT-40 type. 　　　IBT-408　　Applicable diameter range Φ130～Φ250 　　　IBT-412　　Applicable diameter range Φ205～Φ370 　　　IBT-415　　Applicable diameter range Φ250～Φ470

• Support hardware/opening hardware

【Features】 ◆ To prevent the destruction of electronic devices due to electrical influences such as lightning within buildings, it is necessary to equalize the electrical potential of the entire structure. This is a connecting fitting used to electrically connect rebar or steel frames. No welding work is required, and it can be installed using only a wrench. No special qualifications are needed. ◆ During installation, it is possible to electrically connect deformed steel bars (rebar) without welding. ◆ The applicable deformed steel bars (rebar) range from D13 (φ12.7) to D32 (φ31.8). ◆ It is coated with molten zinc, making it resistant to rust during installation and storage. ◆ It complies with "JIS A 4201:2003 Lightning Protection for Buildings" and "JIS A 4201:1992 Lightning Protection Equipment for Buildings (Lightning Rods)."

• Support hardware/opening hardware

【Features】 ◆ We offer a wide range of options based on the weight, size, and mounting holes of the box. ◆ If you have any questions regarding usage, product strength, or inquiries about custom products, please feel free to contact us.

• Support hardware/opening hardware

"Bird Pass" "Trikade" Needle length 60mm 120mm 【Features】 ◆ For thick cables or when width is required, connect horizontally! When length is needed, connect vertically! ◆ The soft resin spikes can chase away birds without harming them. ◆ Can be easily adjusted in length as it can be cut with scissors. ◆ When using "Bird Pass" in a pipe shape, it can be easily connected by fitting the uneven parts of the connection. Additionally, the connection part has a double hook structure, making it difficult to fall off. ◆ "Trikade" allows for vertical and horizontal connections simply by threading the needle through the connection holes, enabling various sizes depending on the combination.

• Pest and insect control products

【Features】 ◆Safe Edge Folding Both edges of the strap are bent for the safety of the user. ◆Strong Clamping Force The clamping mechanism uses a ratchet system, providing a strong clamping force. ◆Excellent Workability The clamping fittings and strap are set together, allowing for easy tightening with repeated lever action, resulting in excellent workability.

• Support hardware/opening hardware

Iwabuchi Corporation is a comprehensive specialized manufacturer that produces joint parts essential for building social infrastructure. This catalog introduces products such as equipment for power distribution line poles and disaster prevention radio facility poles. 【Featured Products】 ■ Power distribution line pole equipment ■ Communication and telephone line pole equipment ■ Broadband pole equipment ■ Traffic signal and road sign pole equipment ■ Disaster prevention radio facility pole equipment ■ Sports facility equipment * An electronic version of the catalog is available on our website. http://www.iwabuchi.co.jp/seihin/ * For more details, please contact us.

• Support hardware/opening hardware

【Features】 ◆ The wave-shaped design with a Φ2mm line makes it difficult for birds to grasp and minimizes the risk of harming them. The weight at the balancer support generates a pendulum motion that enhances the effect of deterring incoming birds. ◆ It comes with an easy-to-grip knob for indirect live-line tools, allowing for simple installation. ◆ It is possible to connect and deploy up to 40 units (approximately 20m). Please use a line pass stopper (sold separately) during installation. The stopper should be used for every connection of up to 40 units (approximately 20m).

• others

The molten zinc-aluminum alloy coating "MAG+1" is a high corrosion-resistant coating formed by immersing in a plating bath of zinc - 5% aluminum - 1% magnesium. It significantly extends the lifespan of hardware in harsh corrosive environments such as areas with severe salt damage. 【Features】 ■ Long lifespan ■ Salt damage countermeasures ■ Volcanic gas countermeasures ■ Spring damage countermeasures For more details, please refer to the catalog or feel free to contact us.

• Support hardware/opening hardware

At Iwabuchi Co., Ltd., we conduct research and design development, evaluation and verification, mold manufacturing, and production in-house. Our company strives to fully meet customer needs and expectations by enhancing research facilities and effectively utilizing 3D CAD and CAE (finite element method) to improve production quality. Leveraging our strengths in design development, commitment to quality, and diverse product range, we support the construction of social infrastructure. 【Features】 ■ In-house integrated production ■ Function enhancement through implementation column testing equipment ■ Reliability improvement through various evaluations and verifications ■ Reduced lead time ■ Cost reduction For more details, please refer to our catalog or feel free to contact us.

• Facility Design

The "driving type auxiliary anchor" is compact and lightweight, yet it ensures sufficient tensile strength due to the resistance plate's radius. To enable easy and clear driving operations, the area of resistance has been minimized, and the contact points with the tool have been reduced to two locations. By being compact, it allows for minimal excavation range during the installation of buried objects, enabling quick and safe construction. 【Features】 ■ Compact and lightweight ■ Easy and clear ■ Quick and safe For more details, please refer to the catalog or feel free to contact us.

• Work tools

Iwabuchi Co., Ltd. has newly introduced a "Laser Combination Machine" and a "Press Brake" to strengthen our response to thin plate precision sheet metal processing, small lot production of various types, short delivery times, and rapid prototype manufacturing! By utilizing the newly introduced equipment, we will meet customer needs for thin plate precision sheet metal processing, small lot production without molds, and short delivery times, which were difficult to address with our conventional equipment. 【Features of the Laser Combination Machine】 ■ Advanced automation equipment ■ No mold forming required ■ Low-cost production capability 【Features of the Press Brake】 ■ Bending processing possible with owned molds ■ Multiple standard molds available ■ Use of CAM for small lot production of various types and short delivery times *For more details, please download the PDF or feel free to contact us.

• others

The "Spiral Hanger" is made of hard steel wire that is zinc-coated and covered with a low-friction polyethylene resin. It features removable quick joints at both ends to connect the spiral hangers to each other. 【Features】 ◆Safety It eliminates the need for aerial work when crossing roads, railways, or rivers, enabling safer operations. ◆Speed-up There is no need for metal work, and aerial work or moving between poles with high-altitude work vehicles is unnecessary, which speeds up the work process. ◆Stand long It does not forcefully bind the cables, reducing stress and contributing to long-term reliability.

• Metalwork