松阪興産 List of Products and Services

We would like to introduce the "VS Side Ditch and MK Variable Ditch" that we handle. During construction, it is possible to use the four inserts installed at the top edge for lifting, allowing for construction without being affected by surrounding structures since the lifting is done at the four points on the top edge. This product can be used for large commercial facilities that require high flow rates, maintenance and repair of existing large open channels, and replacement of box culverts without soil cover. 【Features】 ■ The MK variable ditch features artistic patterns that consider the landscape, arranged on both the ditch body and the lid. ■ Available for longitudinal and transverse use, as well as for end adjustment with transverse drainage. ■ The main body has four M20 swivel eye bolts for lifting. ■ The lid has two V-hanger M20 for lifting. *For more details, please refer to the PDF document or feel free to contact us.

• Gutters and U-shaped gutters

We would like to introduce our "L-shaped street gutter and base-mounted pedestrian boundary block." The "L-shaped street gutter" is a product that integrates the boundary block and street gutter, and it is available in various types including standard products, drainage, entry, and lowering versions. The "base-mounted pedestrian boundary block" is a product that combines the pedestrian boundary block with the foundation concrete. We also manufacture a weed prevention block type to prevent the growth of grass and plants. 【Features of L-shaped street gutter】 ■ A product that integrates the boundary block and street gutter ■ Available in various types including standard products, drainage, entry, and lowering versions ■ We also manufacture PLF that allows for the precasting of only the street gutter part, enabling the placement of any desired boundary block ■ We also manufacture a weed prevention block type to prevent the growth of grass and plants on the pedestrian side *For more details, please refer to the PDF document or feel free to contact us.

• Concrete block, ALC panel, extrusion molded cement board construction
• Road facilities
• others

The "Joint Waterway" is an open channel that overcomes the displacement and leakage issues at the joints, which were drawbacks of concrete secondary products, by using a special jointing method. The joint sections have exceptional strength (resistance) and minimize displacement to an extremely small degree, completely preventing leakage at the joints, thus ensuring reliable treatment of "irrigation water" or "wastewater." Additionally, it excels in workability and cost-effectiveness, significantly resolving the shortcomings of conventional methods, allowing for a more economical, faster, and more precise finish, while also being highly reliable and easy to maintain after installation. 【Features】 ■ The flexible joints and minimal displacement at the connections allow for complete prevention of leakage. ■ The strength of the joint sections simplifies foundation work, enabling cost-effective construction. ■ It can be safely used even on poor-quality ground. *For more details, please refer to the PDF materials or feel free to contact us.

• Concrete block, ALC panel, extrusion molded cement board construction
• Road facilities
• others

The "L-shaped water channel" is a product that consists of L-shaped blocks installed on both sides, forming part of the side walls and the bottom slab, with the central part of the bottom slab connected and integrated using cast-in-place reinforced concrete. Therefore, unlike other secondary product water channels, it is possible to freely adjust the width of the water channel. Additionally, if there is a height difference in the ground level on the left bank and right bank, L-shaped blocks corresponding to each can be used, allowing for adaptation to site conditions. 【Features】 ■ Shorter construction time and labor savings compared to cast-in-place water channels ■ Water channel heights can be accommodated from 0.6m to 3.0m ■ Can accommodate curved sections ■ Prevents settlement through bolt connections ■ Weep wheels (check valves) can also be added as an option *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Concrete block, ALC panel, extrusion molded cement board construction
• Road facilities

"Sakamichi-kun" is a concrete secondary product that accommodates a longitudinal road gradient of 0% to 16%. It is compatible with standard and fine mesh, and the grating is bolt-fixed for T-25 compatibility. Additionally, it enables smooth driving and eliminates bumps on gradients. 【Features】 ■ Accommodates a longitudinal road gradient of 0% to 16% (products are available in 2% increments) ■ Eliminates bumps on gradients (achieves smooth driving) ■ T-25 compatible with bolt-fixed grating (compatible with standard and fine mesh) *For more details, please refer to the PDF document or feel free to contact us.

• others
• Concrete block, ALC panel, extrusion molded cement board construction

We would like to introduce our concrete secondary products 'PC wells' in grating type and flat type. The main body is equipped with inserts (anchors) for lifting, and a ladder for ascent and descent can be optionally installed. In cases where the height is significant, it is also possible to combine the grating type (without a bottom) and the flat type. 【Features】 ■ The weight of the grating cover is based on T-25 fine mesh. ■ Grating covers are available in standard mesh, fine mesh, as well as T-2, T-14, T-25, etc. ■ In addition to bolt fixation, a hinged option is also available. ■ Openings can be square, rectangular, or circular. ■ The main body is equipped with inserts (anchors) for lifting. *For more details, please refer to the PDF document or feel free to contact us.

• Grating
• others

The "Guard Wall" is a precast L-shaped retaining wall standardized for heights ranging from 0.8 to 4.0 meters, developed to be applicable for various purposes. A fence can be installed on the top edge, and the product is available in heights ranging from H = 800 mm to 4000 mm. 【Features】 ■ Surface finishing can be applied to the front wall ■ More economical compared to conventional products ■ Mechanical construction allows for significant reduction in construction time *For more details, please download the PDF or feel free to contact us.

• Concrete Retaining Wall
• Retaining wall

"HD Wall" has obtained ministerial certification, making it a retaining wall that can be used with confidence. If within the certification conditions, there is no need for calculations or other hassles. The procedures from planning to approval can be simplified. Additionally, if you use corner products for corner angles of 90° and 135°, you can easily handle troublesome corner treatments. [Features] ■ Reliable ministerial certified product with simplified procedures ■ Maximizes the use of valuable land ■ Troublesome corner treatments are also handled with precast ■ Durability is guaranteed ■ Economical standard selection is possible *For more details, please download the PDF or feel free to contact us.

• Retaining wall
• Concrete Retaining Wall

This product is an electrical handhole manufactured with a design load set at T-25 and a concrete design standard strength of 35N/mm². The joint surfaces have a concave and convex interlocking shape, allowing for work without misalignment during construction. Additionally, waterproofing can be achieved using butyl rubber sealant or epoxy resin adhesive. Moreover, each surface is equipped with knockouts for piping, making on-site processing easy. 【Features】 ■ Inserts with protective caps are embedded in each surface ■ A drainage plug is installed at the bottom ■ In low water level areas, the drainage hole can be used, while in high water level areas, it can be sealed with a water stop bolt ■ The joint surfaces have a concave and convex interlocking shape *For more details, please download the PDF or feel free to contact us.

• Inspection hatches, manhole covers, and ditch covers

The base-mounted pipe is a pipe product manufactured using the Baikon method, featuring a base-mounted shape. Due to its base-mounted shape, there is no need for winding or other preparations, allowing for easy installation. Additionally, a high-performance rubber joint is embedded in the connection part, ensuring water tightness when inserted. 【Features】 ■ Workability - Stable and can be easily installed and joined by simply aligning the pipes on the foundation. ■ Cost-effectiveness - High strength eliminates the need for concrete winding. ■ Earthquake resistance - The flexibility of the joint and the strength of the pipe itself allow it to follow ground movements. - (BZ base-mounted pipe) has Level 2 earthquake resistance performance. *For more details, please download the PDF or feel free to contact us.

• Piping materials (concrete pipes)

The "SJ-BOX" is a culvert that uses rubber rings in the joints, allowing for the construction of a flexible pipeline that meets the performance requirements for level 2 seismic motion. Due to its simple structure, it maintains excellent workability and cost-effectiveness. Additionally, even small-diameter boxes that cannot accommodate a person inside can ensure seismic resistance and water-tightness. 【Features】 ■ Capable of constructing a flexible pipeline ■ Excellent water-tightness and flexibility ■ Rapid construction possible ■ No need for flexible joints or PC vertical tightening ■ Can also be used as a flexible structure for sluice gates, etc. *For more details, please download the PDF or feel free to contact us.

• Piping materials (concrete pipes)

The "MK Large Knowledge Block" is a large stacking block designed to solve issues such as limited construction area, shortage of stone masonry craftsmen, and the decrease of manufacturing plants that arise when stacking knowledge blocks for construction. The surface area of each block is 1.5m² (2m x 0.75m), the block control length is 35cm (excluding decorative parts), the compressive strength is 30N/mm², and the product weight is 602kg (400kg per m²). Additionally, it has a shape that becomes integrated through the use of core and backfill concrete. 【Features】 ■ 1.5 times the surface area ■ Surface pattern features a calm texture with a chiseled design ■ Integration of the block with core and backfill concrete ■ Interlocking parts designed with a concave-convex shape to prevent sliding of the blocks, etc. *For more details, please download the PDF or feel free to contact us.

• Stacking blocks
• Concrete block, ALC panel, extrusion molded cement board construction

The "VS Side Ditch Flexible Type" and "MK Variable Side Ditch Flexible Type" are ditches that satisfy contractors, designers, clients, and residents, making them easy to install just like straight ditches, while also being safe and environmentally friendly. They solve the previously raised issues regarding the treatment of ditches at curves, corners, and the wrapping sections at intersections. We have improved the construction efficiency by eliminating unnecessary product cuts and the assembly work of formwork. 【Features】 ■ Allows for free angle adjustment (maximum turning angle of about 40°) ■ Improved construction efficiency at curves and corners ■ Reduced construction time ■ Environmental conservation, etc. *For more details, please download the PDF or feel free to contact us.

• Gutters and U-shaped gutters

The "MK Variable Side Ditch" is a free gradient ditch that features three functions: surface art patterns, noise-reducing covers, and improved construction speed. The product dimensions are set in accordance with the standard design drawings for civil engineering works issued by the Tohoku Regional Development Bureau. Since the dimensions are the same as those of VS ditches, they can be used when replacing concrete covers during maintenance and repair work. In addition, we offer a wide variety of products, including 1.5m and 1m products, precast drainage basins, and foundation plates, to meet our customers' needs. [Features] - Surface art patterns - Noise-reducing covers - Products for cross-section applications - Wide variety of product types, etc. *For more details, please download the PDF or feel free to contact us.

• Gutters and U-shaped gutters

The "MKK Box" is a management and inspection box developed to be installed underground in rainwater retention and infiltration facilities when constructing residential land or commercial facilities. With an outer diameter of 990×990mm, it is easy to install in conjunction with plastic rainwater retention tanks, allowing for efficient placement of products even in limited spaces. Additionally, by combining side blocks and adjustment rings, height adjustments in 50mm increments are possible. Please order according to the specifications of the rainwater retention tank. 【Features】 ■ Shortened construction period ■ Just fit ■ Easy installation ■ Height adjustment available, etc. *For more details, please download the PDF or feel free to contact us.

• Rainwater infiltration facilities

The "6-shaped drainage channel (pipe-type gutter)" is a gutter that integrates Block B type from the Pedestrian and Vehicle Road Association and circular gutters into a single structure, allowing for the simultaneous finishing of roadside works and drainage structures. Since the water flow cross-section is large, it can accommodate a greater drainage capacity. Additionally, it has various features such as simplification of construction, reduction of construction time, and cost savings. Furthermore, regarding product types, we offer a wide range including water intake types with grating, catch basins, and access types, so please choose according to your needs. 【Features】 ■ Simultaneous completion of roadside works and drainage structures is possible ■ Large water flow cross-section ■ Simplification of construction ■ Reduction of construction time ■ Cost savings *For more details, please refer to the catalog or feel free to contact us.

• Gutters and U-shaped gutters
• Various blocks