植田アルマイト工業 List of Products and Services

Our company performs electrophoretic painting (anodizing treatment) to give aluminum profiles and sheets a sense of design and luxury, while improving corrosion resistance. With our extensive facilities, we can accommodate a wide variety of colors and can handle large sizes (up to 6.5m), which is often difficult for other companies. Additionally, leveraging our years of technical expertise, we can also process challenging white colors! ▼ White Electrophoretic Coating Available in 5 different shades! Electrophoretic coating that gives profiles and sheets a clean appearance. ⇒ Glossy white, anodized coating composite film, weather-resistant, pure white, cream shades, ivory shades. ▼ Gray Electrophoretic Coating Available in over 20 rich shades! Electrophoretic coating that adds a sense of luxury to the appearance using high weather-resistant paint. ⇒ High weather resistance, anodized coating composite film. ▼ Matte Finish Achieve a beautiful matte finish with a sense of luxury! Undercoating for clear and gray electrophoretic coatings is also possible. ⇒ Pearlescent treatment, die pattern concealment, roll pattern concealment. *Color samples are available only for architects and design offices. If you wish to receive them, please apply through the contact form below. *For more details, please download the materials or feel free to contact us.

• Other wall materials

We are currently publishing materials regarding the comparison of "Spray Coating and White Electrodeposition Coating." You can freely download the PDF from the link below. [About Electrodeposition Coating] Electrodeposition coating is a method that provides higher durability than other coating methods because it penetrates the pores of the anodized film, resulting in a very uniform coating that stabilizes the appearance. This allows for uniform coating on sharp edges and corners. Additionally, since the main solvent is water, it is environmentally friendly with low VOC levels. Being a water-based paint, there is also no risk of fire. [Features of Electrodeposition Coating] ■ Coating Thickness Range - 7 to 25 μm - Uniform thickness - Good adhesion ■ Applicable Paints: Thermosetting Resins (such as Acrylic) ■ Applicable Paint Medium: Water + Small Amount of Solvent ■ Material Condition - Can accommodate complex shapes - Can also be used for R-bent materials ■ Quality: Adheres well to edges and corners *For more details, please refer to the PDF document or feel free to contact us.

• Exterior and paving materials <General>

"Color anodizing" is suitable for preventing stray reflections in optical devices and for heat dissipation, starting with black anodizing, and it is also possible to apply black treatment to aluminum die castings. Since the ordinary anodizing and hard anodizing are colored on the base layer, the corrosion resistance, wear resistance, and hardness are improved compared to aluminum substrates. Additionally, there is also color anodizing available for use in decorative items. 【Features】 ■ Treatment is possible for aluminum alloys such as extruded materials, forged materials, cast materials, and die-cast materials. ■ Supports dyeing with dyes and black coloring through secondary electrolytic coloring. ■ Black treatment is also possible for die-cast materials. ■ Improved corrosion resistance, wear resistance, and hardness compared to aluminum substrates. ■ Black treatment is possible, and other color tones are also supported. *For more details, please refer to the PDF document or feel free to contact us.

• others

"Zirconium treatment (chromium-free chemical conversion)" is a chromium-free chemical treatment that does not use substances regulated by RoHS. It can be applied to aluminum alloys such as extrusions and die-cast materials. By generating a chemical conversion coating, it can improve corrosion resistance compared to the bare state. It serves as a coating that can be used as a base for painting. 【Features】 ■ Applicable to aluminum alloys such as extrusions and die-cast materials ■ Does not contain harmful metals (such as hexavalent chromium) in the chemical conversion coating ■ Capable of improving corrosion resistance compared to the bare state ■ By protecting (masking) the bare state, it can also prevent dimensional tolerance issues and accommodate grounding applications *For more details, please refer to the PDF document or feel free to contact us.

• others

The "FT Coat" is a high-weather-resistant matte electrophoretic coating that excels in gloss stability, workability, and appearance stability, ensuring long-lasting gloss. It uses an acrylic resin that has higher weather resistance than conventional acrylic resins. It suppresses the degradation of the coating film caused by rainwater and ultraviolet rays, which are major factors in the deterioration of electrophoretic coatings, thereby improving the durability of the coating film. Additionally, we offer silver, stainless, bronze, and black colors that emphasize the texture of aluminum, as well as a wide variety of color options to meet other requests. 【Features】 ■ Long-lasting gloss ■ Improved durability of the coating film ■ Weather resistance approximately three times that of conventional products ■ Abundant color variations *For more details, please refer to the PDF document or feel free to contact us.

• others

The "matte finish" is a surface treatment technology that enhances the luxurious appearance by eliminating the die marks of extruded materials and the roll marks of sheet materials. It results in a uniform and beautiful matte (pearlescent) finish, effectively concealing die and roll marks. It is also possible to perform base treatments with glossy and matte clear electrophoresis as well as gray electrophoresis. Please check the color tone with color samples in advance. 【Features】 ■ Achieves a uniform and beautiful matte (pearlescent) finish ■ Effectively conceals die and roll marks ■ Base treatments with glossy and matte clear electrophoresis and gray electrophoresis are also possible *For more details, please refer to the PDF materials or feel free to contact us.

• others

Ueda Armaito Industry Co., Ltd. has been striving to improve technology since its establishment in 1948, contributing to the development of people's lives and industries through excellent aluminum surface treatment technology. We handle surface treatment for all types of aluminum materials, including extrusions, drawn materials, sheets, forged materials, cast materials, and die-cast materials. Our quality is recognized by customers in a wide range of fields, including automotive, semiconductor manufacturing equipment, LCD manufacturing equipment, pneumatic equipment, food manufacturing machinery, general industrial machinery, optical equipment, and construction materials. High-quality surface treatment technology is adopted for both small parts and large materials, and its applications are trending to expand further. Please leave the surface treatment of aluminum and magnesium alloys to us. 【Business Content】 ■ Aluminum surface treatment ■ Hard anodizing ■ Regular anodizing For more details, please refer to our catalog or feel free to contact us.

• Interior and exterior construction accessories

"Keplakote" is a plasma electrolytic treatment that generates an oxide film through the reaction of a large amount of oxygen plasma produced by plasma electrolysis in a specially developed processing solution with aluminum alloy, allowing for the imparting of distinctive functions and performance. The most characteristic feature is that the black treatment can conceal the flow patterns of aluminum die-casting, resulting in a very beautiful appearance. The oxide film treated with Keplakote shows no peeling or discoloration in the temperature range of -196 to +400 degrees. [Features] ■ Excellent fatigue strength ■ Low gas emissions ■ UV protection ■ Anti-glare ■ Excellent heat resistance For more details, please refer to the catalog or feel free to contact us.

• others

"Oxalic Acid Hard Anodizing" is a hard anodizing treatment that does not contain sulfur compounds in the film, making it less likely to release contaminants in semiconductor manufacturing equipment and other applications. Even when used under vacuum, the amount of gas released is reduced compared to sulfuric acid anodizing. Surface roughness can be suppressed compared to sulfuric hard anodizing. It has high weather resistance, and there is hardly any noticeable color change even when used outdoors. It has a natural gold finish that provides a beautiful appearance, and since it is also used in cookware (such as home pots and kettles), it can be used safely. 【Features】 ■ Clean film ■ Low gas emission ■ High weather resistance ■ Safety of the film ■ Beautiful appearance For more details, please refer to the catalog or feel free to contact us.

• others

"Unimite" is a coating based on UA coat or Toughmite, featuring the characteristics of hard anodizing while combining electrical conductivity and static electricity prevention. It is a coating with excellent thermal conductivity, capable of reducing cracks caused by heat. The coating has antibacterial properties (cold sterilization capability), making it suitable for use in the food and hygiene sectors. The color is typically gold, but it can also be dyed black. 【Features】 ■ Electrical conductivity - Can reduce resistance values by 20-40% compared to hard anodized coatings ■ Excellent thermal conductivity ■ Antibacterial properties ■ Safety For more details, please refer to the catalog or feel free to contact us.

• others

"Toughmite" is a hard anodizing treatment that involves electrolyzing aluminum alloy in a special electrolyte mixed with water-soluble resin, resulting in a surface roughness that is minimal, improved corrosion resistance, and hardness. It is suitable for precision machine parts and sliding components as it forms a uniform coating without significantly altering the surface accuracy of the material. Thanks to the effectiveness of the water-soluble resin, it exhibits corrosion resistance that surpasses that of conventional hard anodizing. [Features] - Corrosion resistance - Improved airtightness - Excellent heat resistance, heat dissipation, and weather resistance achieved through black secondary electrolytic coloring treatment - High weather resistance against ultraviolet rays and other elements For more details, please refer to the catalog or feel free to contact us.

• others

"UF Coat" is a hard anodizing treatment that allows the impregnation of fluororesin into the porous layer of the anodized film after the formation of a hard anodized film (UA Coat). By maintaining hardness while providing high lubricity characteristics, wear resistance is dramatically improved. Treatment is possible for both small and large materials. By applying black secondary electrolytic coloring treatment to UF Coat, it exhibits excellent heat resistance and heat dissipation while retaining the characteristics of UF Coat. It also demonstrates high weather resistance against ultraviolet rays and other elements. 【Features】 ■ Reduced friction coefficient ■ Improved hardness and wear resistance ■ Suitable for food and pharmaceutical industries ■ Treatment possible for inner surfaces of pipes ■ Excellent heat resistance, heat dissipation, and weather resistance For more details, please refer to the catalog or feel free to contact us.

• others

The "UA Coat" is a hard anodizing treatment for aluminum alloys, castings, and die-cast materials. It accommodates surface treatment for both small parts and large materials, including the inner surfaces of pipes, contributing to the development of various aluminum applications. Even for difficult-to-treat duralumin materials (2000 series, 7000 series) and die-cast materials, a high-quality coating is produced. The color tones correspond to natural coloration based on film thickness and aluminum alloy types, as well as black. 【Features】 ■ Excellent heat resistance, heat dissipation, and weather resistance ■ Excellent wear resistance ■ Compatible with various aluminum alloys ■ Sealing treatment is performed to improve corrosion resistance ■ Can also be applied to the inner surfaces of long pipes, etc. For more details, please refer to the catalog or feel free to contact us.

• others

The "Magokishi Coating" is an oxide film generated by the reaction of a large amount of oxygen plasma produced by plasma electrolysis and magnesium alloy in a specially developed treatment solution. By transforming the surface into an oxidized magnesium layer, it enhances protection. It features a naturally occurring white and black oxide film that provides a beautiful matte (pearlescent) appearance. It can be applied to almost all magnesium alloys, including extruded materials and die-cast materials. 【Features】 ■ Treatment applicable to almost all magnesium alloys ■ Naturally occurring white and black oxide film ■ Beautiful matte (pearlescent) appearance ■ Excellent corrosion and wear resistance For more details, please refer to the catalog or feel free to contact us.

• others

The Ueda Anodized Specification "G-600" and "SG-600 Series" with 'Gray Electrophoretic Coating' can achieve over 20 different color tones by applying secondary electrolytic coloring or a matte finish to the underlying anodized film. It uses high weather-resistant paint, making it suitable for harsh outdoor environments, and has a proven track record in various architectural applications. It complies with the new JIS A1 standard. 【Features】 ■ Provides a high-quality appearance for extrusions and sheets ■ Achieves over 20 different color tones ■ Uses high weather-resistant paint ■ Usable in harsh outdoor environments For more details, please refer to the catalog or feel free to contact us.

• others

Our company's Ueda Anodizing "White Electrodeposition Coating" is available in five color variations: pure white (type C-500), cream shades (types N-501 and C-501), and ivory shades (types L-502 and C-502). Until now, we have only applied color to extruded materials, but we can also process aluminum flat plates, perforated sheets, and bent materials. It is suitable for LED lighting components that require high reflectivity and for materials that need a clean appearance. Currently, we are publishing technical materials comparing spray painting and white electrodeposition coating. 【Applications】 - As interior building materials (adding design to aluminum materials) - In various transportation equipment (for exterior frame materials and doors of trucks and refrigerated vehicles) - In home appliances and electric lighting (for LED lighting) 【Features of White Electrodeposition Coating】 - Provides a clean appearance for profiles and sheets - Supports five shades of white (pure white, cream, ivory) - Ideal for appearance-related components and vehicle parts *For more details, please refer to our catalog or technical materials, or feel free to contact us.

• others

The "UA Coat" is a high-performance surface treatment technology that can perform hard anodizing on aluminum alloys, castings, and die-cast materials. By applying black secondary electrolytic coloring treatment to the UA Coat, it exhibits excellent heat resistance and heat dissipation while maintaining the functions of the UA Coat, as well as high weather resistance against ultraviolet rays and other elements. Furthermore, it can accommodate various aluminum alloys and is capable of processing the inner surfaces of pipes, making it a surface treatment technology that contributes to the development of various aluminum applications. 【Features】 - Excellent heat resistance, heat dissipation, and weather resistance - High hardness and wear resistance - Compatible with various aluminum alloys *For more details, please refer to the catalog or feel free to contact us.

• Other opening accessories (airtight materials around doors and windows, etc.)