トレルボルグ小田原 List of Products and Services

This product is an LP-type fender that is particularly effective for vessels with weak hull strength. Repair work is easy. Due to the low internal air pressure, repairs can be carried out on-site. (Using a method similar to bicycle puncture repair) Additionally, the roll packaging saves storage space and facilitates air transport. For more details about other products, please contact us. 【Features】 ■ Air-operated ■ Low reaction force ■ Particularly effective for vessels with weak hull strength ■ Various sizes can be manufactured (maximum diameter 6500mm) ■ Roll packaging saves storage space and facilitates air transport *For more details, please refer to the PDF materials or feel free to contact us.

• others

The product is a donut-shaped fender that remains at a constant position above the water surface regardless of the tide level, absorbing the kinetic energy of contacting vessels and safely guiding them in a predetermined direction through rotational motion. Installation is simple; just insert the product from the top of the steel pipe piles that have been driven into the planned installation location. Please use it for protecting and guiding vessels at corners of quays and waterways, as well as at entrances and exits of docks, and for protecting bridge piers and gates. 【Features】 ■ Floating rotation type ■ Always moves to a predetermined position above the water surface under various tide conditions ■ Absorbs kinetic energy while simultaneously changing the direction of vessel movement through rotational motion ■ The outer layer is made of urethane rubber that is less likely to transfer color to the hull ■ Tough structure that is maintenance-free *For more details, please refer to the PDF document or feel free to contact us.

• others

"SEAGUARD" is a foam-type fendering material suitable for shipyard outfitting quays and floating pontoons. It is made of 100% closed-cell polyethylene foam (sponge) wrapped in an outer rubber layer, eliminating the need for troublesome air pressure adjustments like those required for inflatable fenders. There is also no worry about punctures or air leaks. Additionally, our product features a maintenance-free and robust structure, making it widely used not only at general quays but also in military ports, passenger ship terminals, shipyards, and floating pontoons. 【Features】 ■ No internal pressure adjustment required ■ Maintenance-free ■ Can be used without a chain net, preventing damage to the hull ■ Uses low-friction urethane rubber that minimizes color transfer to the hull ■ Sturdy construction *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the "shock-absorbing plates, mounting brackets, and lifting equipment" handled by Trelleborg Marine Systems Japan. Our company conducts unique quality checks on suppliers and sources externally only from reliable suppliers. Chains and other lifting equipment are basically supplied with hot-dip galvanized finishes, and chain brackets can also be supplied with high corrosion-resistant coatings such as epoxy paint upon request. Please feel free to contact us. 【Features】 <Shock-absorbing Plates> ■ Sealed structure steel construction ■ Internal structural members ■ Airtightness testing ■ C5M base epoxy paint finish ■ Polyurethane top coat also available (RAL5005 blue) *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Tug Fender" is a fender used under extremely harsh conditions where tugboats, which are small vessels susceptible to wave effects, guide large ships with minimal motion. It requires not only frictional force to firmly support the hull but also durability to withstand harsh usage environments over long periods. Trelleborg offers a diverse lineup of fenders for tugboats and workboats, including cylindrical, D-shaped, block-type, and wide M-type fenders. 【Features】 - Custom-made to meet needs both domestically and internationally - Over 60 delivery projects from the Japan office - Responds to the specific preferences of each shipowner and shipyard - Reliable support for projects aimed at overseas shipowners - Sturdy design *For more details, please refer to the PDF materials or feel free to contact us.

• others

Introducing the "Parallel Motion Fender (PMF)." By using this product and arranging two rubber fenders back-to-back in series, it is possible to reduce the reaction force by up to 60% compared to conventional fender systems. The torsion arm is equipped with super engineering plastic (Orcot) bearings, which keep the position of the impact plate, located at the front, vertical while also supporting the weight of the impact plate. 【Features】 ■ Ultra-low reaction force and high energy absorption ■ Torsion bar that maintains the vertical position of the impact plate ■ Capable of accommodating large berthing offset requirements ■ Strong against large berthing angles ■ Can handle extremely severe conditions with significant tidal differences *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SAN & AN Series" is a V-shaped fender widely used in ports around the world. The V-shaped cross-section deforms under buckling, demonstrating energy absorption performance. By selecting the length according to the application, it is easy to accommodate tidal differences and adjust the amount of energy absorption, making it widely used as a general-purpose fender in many mooring facilities. Additionally, to reduce the shear force generated by direct contact between the rubber and the hull, it can be combined with ultra-high molecular weight polyethylene (UHMW-PE) pads with a low friction coefficient, such as the "ANP type" and "SANP type." It is also possible to use it in combination with impact plates as a measure to prevent color transfer to the hull and to reduce surface reaction forces. 【Features】 ■ Easy to accommodate tidal differences (length can be selected) ■ Various mounting directions possible according to application ■ Excellent durability due to single structure ■ High friction force from contact with rubber surface alleviates hull movement ■ Widely used in ports around the world *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "SCK Series" is a cell-type fendering material that excels in low reaction and high energy absorption stability. It is easy to design according to the structure of the quay, tidal range, and specifications and sizes of vessels. Due to its excellent durability, it is widely used in ports around the world, from small boats to large tankers. Additionally, since the tidal range, size of the target vessel, and allowable surface reaction force of the hull vary by project, we offer customized proposals in suitable forms, including the shape of the fender panels and the layout of various chains. 【Features】 ■ High performance ■ Capable of installing large fender panels ■ Structure proven to have excellent durability ■ System with low surface reaction force ■ Customized proposals in suitable forms *For more details, please refer to the PDF materials or feel free to contact us.

• others

The SCN series is a super cone-shaped fender that achieves low reaction and high energy absorption due to its large design deflection. It features a conical shape, which can be considered an ideal and stable form against complex loads such as shear forces and inclined compression acting on the fender. Additionally, it is possible to equip it with an overload stopper on the inside to prevent over-compression, protecting the fender system from damage. 【Features】 ■ Geometrically stable shape that accommodates various load conditions ■ Excellent inclined compression and shear force performance ■ Versatility that can accommodate differences in tide levels and the size of vessels ■ Durable design ■ Achieves low reaction and high energy absorption *For more details, please refer to the PDF materials or feel free to contact us.

• others

This catalog is for the products of Trelleborg Marine Systems Japan, which mainly engages in the sale of various products for ports and marine applications. It features a variety of fenders, including the "Super Cone" with excellent durability, the "Cell" type that allows for the installation of large impact plates, and the "V" type that easily accommodates tidal variations. We have a wide range of products for ports and marine applications. [Contents] - Super Cone fenders - Cell fenders - V fenders - Corner arch fenders - Parallel motion fenders, etc. *For more details, please refer to the catalog or feel free to contact us.

• Port supplies