相模 List of Products and Services

The "Spray" is a manually operated, labor-saving sprayer made of stainless steel, specially designed for use with oil-based agents, disinfectants, and other commercial applications that require resistance to oil-based substances. As it is a pressurized automatic system, it allows for uniform and rapid spraying until the very end with a consistent pressure of approximately 20 to 30 pumps. It features a special valve for releasing residual pressure. The large oil inlet makes it very easy to refill. Additionally, the oil stopcock can be operated with one hand for easy opening and closing. 【Features】 ■ Made of materials resistant to oil-based agents and designed for commercial use with oil and disinfectants ■ Allows for uniform and rapid spraying until the very end due to consistent pressure ■ Incorporates a special valve for releasing residual pressure ■ Large oil inlet for easy refilling ■ One-touch oil stopcock for easy one-handed operation *For more details, please refer to the PDF document or feel free to contact us.

• others

"NoroClear" is a product designed to chemically dissolve and remove concrete sludge by using a high concentration of multi-layered organic fatty acids. It is a water-dilutable type with excellent dissolving power, gradually breaking down concrete, mortar, and cement paste. It does not erode or discolor paint films, chrome plating, or tin plating surface treatment films. Additionally, a dipping method is possible, allowing temporary materials and formwork to be immersed in the solution for removal. 【Features】 ■ Chemically high concentration of multi-layered organic fatty acids ■ Water-dilutable type with excellent dissolving power ■ Does not erode or discolor surface treatment films ■ Can remove sludge and rust as a pre-treatment for formwork repair ■ Dipping method allows for immersion of temporary materials and formwork for removal *For more details, please refer to the PDF document or feel free to contact us.

• others

"Last C" is a rust remover that can easily remove red rust and other contaminants adhered to concrete surfaces with simple work. It brings internal rust to the surface, allowing for removal without damaging the concrete. It can be used for removing rust from formwork adhered to concrete surfaces and rust that has flowed onto concrete surfaces. [Features] - Easily removes red rust and other contaminants from concrete surfaces with simple work - Brings internal rust to the surface - Allows for removal without damaging the concrete *For more details, please refer to the PDF document or feel free to contact us.

• others

"San Crack" is a penetrating curing agent designed for the initial curing of concrete. It protects the surface of the concrete immediately after placement and prevents hairline cracks by sealing in internal moisture during concrete work in high temperatures during summer, during winter concrete pouring when adequate insulation measures are not taken, and during pouring operations in strong winds. This product penetrates hardened concrete surfaces and creates a strong alkaline layer, preventing the deterioration of the concrete surface. 【Features】 ■ Penetrating curing agent aimed at the initial curing of concrete ■ Prevents hairline cracks by protecting the surface and sealing in internal moisture ■ Penetrates hardened concrete surfaces and creates a strong alkaline layer ■ Prevents the deterioration of the concrete surface *For more details, please refer to the PDF document or feel free to contact us.

• Concrete curing material
• Concrete construction

"Sanamold R-200T" is a water-soluble release agent that contains a specially refined surfactant blended in the most effective way, designed for water-soluble concrete formwork release (dilution of 5 to 10 times). When water is added, it quickly disperses and turns milky white, and it does not separate even when left for a long time. Compared to oil-based types, it results in fewer pinholes on the concrete surface, providing a beautiful finish, and it does not interfere at all with the adhesion of finishing agents such as mortar and sprayed tiles. Additionally, the emulsion applied to the formwork relatively quickly evaporates moisture, forming a semi-dry film that is effective for release. [Features] - Contains a specially refined surfactant blended in the most effective way as a water-soluble release agent - Does not separate even when left for a long time - Does not interfere at all with the adhesion of finishing agents such as mortar and sprayed tiles - Forms a semi-dry film that is effective for release - Extremely cost-effective compared to oil-based release agents *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• others

"Sanamold SN-36" is a water-based concrete form release agent (10 times dilution) that contains no mineral oil at all. It adheres well to the formwork, leaves no oily film, has no oil burning, and generates almost no bubbles, forming a smooth dry film. There is no hindrance to the adhesion of finishing agents such as formwork mortar and adhesive tiles. Additionally, it can be used safely as it is non-flammable. 【Features】 ■ Contains no mineral oil at all ■ Forms a smooth dry film ■ Easily dissolves in cold or warm water ■ No hindrance to the adhesion of finishing agents such as formwork mortar and adhesive tiles ■ Safe to use as it is non-flammable *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• others

"Sanamold FX-101" is an environmentally friendly water-based concrete form release agent composed of over 95% biodegradable materials. Since it does not use mineral oils, it leaves no oil stains, oil burns, or streaks. The surface of the concrete achieves a uniform and beautiful finish with minimal bubble marks. Additionally, it is non-flammable and safe for human health, making it suitable for tunnel construction. 【Features】 ■ Environmentally friendly release agent with excellent biodegradability ■ No mineral oils used, so it leaves no oil stains, oil burns, or streaks ■ The surface of the concrete has a uniform and beautiful finish with minimal bubble marks ■ Also has rust prevention properties and is compatible with various form materials ■ No odor or skin irritation, considerate of the working environment *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• Tunnel Materials
• others

"Sana Mold No-3" is a chemical reaction-type concrete form release agent developed mainly for wave-dissipating blocks, anchoring blocks, and other port construction projects. Based on "Sana Mold No-2," it improves rust prevention and workability. The viscosity has been adjusted to allow for easy application even on complex shapes and fine details, so please use it in its concentrated form. Continued use makes it easier to remove old concrete, reducing cleaning work. 【Features】 ■ Developed mainly for wave-dissipating blocks, anchoring blocks, and other port construction projects ■ Improved rust prevention and workability ■ Viscosity adjusted for easy application on complex shapes and fine details ■ Makes it easier to remove old concrete, reducing cleaning work *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• Various blocks
• others

"Sana Mold No-2" is a cost-effective release agent, a chemical reaction type concrete formwork release agent suitable for various plywood and steel formworks. It reacts with the alkalinity of fresh concrete, creating a film of metallic soap that allows for easy separation between the formwork and the concrete surface, leaving no oil film on the concrete surface, which does not hinder the adhesion of finishing materials such as mortar and sprayed tiles. Additionally, it forms an anti-rust film on the surface of the formwork, protecting it from rust. 【Features】 ■ Compatible with various plywood and steel formworks ■ Does not hinder the adhesion of finishing materials such as mortar and sprayed tiles ■ Results in a concrete surface with minimal bubble marks and a glossy finish ■ Creates an anti-rust film on the surface of the formwork, protecting it from rust ■ No sludge adheres to the formwork surface, preventing damage during grinding work *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• Tunnel Materials
• others

"Sanamold No. 1" is a chemical reaction-type concrete form release agent that contains a high concentration of plant oils, mineral oils, special surfactants, rust inhibitors, and more. It reacts with the alkalinity of fresh concrete to create a film of metallic soap on the formwork and concrete surface, allowing for the release of the formwork and resulting in a beautiful, uniform-colored concrete surface without oil stains. It has a strong adhesion effect to the formwork, is resistant to being washed away by rainwater, and maintains its release effect even when dry. Additionally, applying it in a thin layer contributes to cost reduction. [Features] - Resistant to being washed away by rainwater, and the release effect remains unchanged when dry - Contributes to cost reduction by allowing for thin application - Significantly improves work efficiency as no sludge adheres to the formwork - Contains rust inhibitors to prevent rusting of steel formwork - Suppresses the formation of air bubbles on the concrete surface *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• Tunnel Materials
• others

"Sana Mold DX" is a chemical reaction-type concrete formwork release agent and anti-sludge adhesion agent that contains a high concentration of plant oils, mineral oils, special surfactants, and special rust inhibitors. When applied to ready-mixed concrete manufacturing equipment and transportation equipment, it forms a special film that prevents adhesion of ready-mixed concrete, and also creates a strong film in tunnels and shield construction areas where there is leakage and high humidity. It has excellent adhesion to formwork and extensibility, and due to its water-replacement properties, it can be used in areas where some moisture is present. 【Features】 - High concentration of plant oils, mineral oils, special surfactants, and special rust inhibitors - Forms a special film when applied to transportation equipment, preventing adhesion of ready-mixed concrete - Creates a strong film in tunnels and shield construction areas with leakage and high humidity - Excellent adhesion to formwork, extensibility, and water-replacement properties - Usable in areas where some moisture is present *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• Tunnel Materials
• others

"Sanamold Super" is a release agent developed for tunnel, shield, caisson, dam, subway, utility duct, and bridge construction. It has a strong adhesion effect to formwork, making it resistant to being washed away by rainwater and aggregates, and the release effect remains unchanged even when dry. Additionally, since there is no sludge adhering to the formwork, finishing work is unnecessary, improving work efficiency. The concrete surface has fewer air bubble marks and is smoother, resulting in a more beautiful finish. 【Features】 ■ Resistant to being washed away by rainwater and aggregates, with unchanged release effect even when dry ■ Eliminates the need for finishing work, improving work efficiency ■ Creates a waterproof and rust-proof film on the surface of the formwork, protecting it from rust ■ The concrete surface has fewer air bubble marks and is smooth *For more details, please refer to the PDF document or feel free to contact us.

• Formwork material
• Tunnel Materials
• Bridge Materials

The "Spray SM-6C" is a manual, labor-saving sprayer made of stainless steel, featuring excellent durability and high functionality. It can be used as a low-viscosity solvent for concrete form release agents, retarders, rust inhibitors, curing agents, and surface hardeners. 【Features】 ■ Excellent durability: Stainless tank, oil-resistant packing ■ High functionality: Pressure accumulation type, pressure relief valve, fan-shaped nozzle, watering can-shaped liquid outlet ■ Ease of use: Shoulder strap, 1.2m hose length *For more details, please refer to the PDF document or feel free to contact us.

• Concrete admixture
• others

The Sanamold series is compatible with the latest risk assessments and implements labeling on products, as well as the sending and distribution of SDS (Safety Data Sheets). The SDS and product catalog for each Sanamold are now easily downloadable from our company website. The "Concrete Form Release Agent Sanamold" offers a rich lineup of concrete form release agents tailored for various applications, such as "Sanamold DX," which is used in patcher plants, concrete pump trucks, and tunnel construction. Additionally, our company is committed to environmentally friendly water-based release agents and offers two types of water-based release agents. Please feel free to contact us. The "Concrete Form Release Agent Sanamold" is a product of Sagami Corporation, which primarily manufactures and sells form release agents for the construction industry, as well as petroleum products, grease, lubricants, and materials for civil engineering projects. ◎ Sales of various oil neutralizers, lubricants, separator cutting oils, etc. ◎ Manufacturing and sales of custom-made form release agents.

• Formwork material
• Tunnel Materials
• Various blocks