センターピア List of Products and Services

● This is a telescopic shelf that can be mounted on a server rack (19-inch rack) regardless of the pitch of the mount angle. ● It is designed to hook onto the cage holes at the back and be secured with screws only at the front, allowing for installation with front-side work only. ● There is no need to go around to the back of the 19-inch rack when installing the shelf, which reduces the burden of work. ● The front and rear pitch of the mount angle ranges from 530 to 800 mm, and it can support a load of up to 30 kg. In addition, we offer a wide range of products, including lightweight thin shelves and sliding shelves for heavy equipment with a load capacity of 200 kg, so please feel free to consult us.

• Safes, Cabinets, Lockers

Disaster emergency power supply "FECORAGE Cart" featuring a safe lithium-ion battery with iron oxide ■Differences from previous portable disaster power supplies… Previous portable disaster power supplies were designed for use in emergencies, which meant they were mostly stored in warehouses during normal times. As a result, they often cannot be used immediately during an emergency because they are not charged. ■Simultaneous charging capability If using tablets, up to 40 devices can be charged simultaneously. Each set can charge up to 20 devices at the same time. By charging from the battery system built into the FECORAGE Cart, it can be used even in places without AC power or during power outages! In school education settings, break time equals charging time, leading to a sudden increase in power consumption. This can result in higher electricity contract costs. The FECORAGE Cart reduces electricity costs by charging its built-in battery during cheaper nighttime electricity rates. In the event of a disaster, AC power can be accessed from the service outlet on the FECORAGE Cart (up to 400W).

• Safes, Cabinets, Lockers

*Effective use of installation space By equipping the server rack (19-inch rack) with a "sliding base," the entire rack can be slid forward. It slides 375mm forward from its fixed position. *Workability on the back side of the rack When installing a rack against a wall, have you found it difficult to work on the back side after it is set up? Since the rack can be slid forward, you can secure a workspace on the back side. This creates about 350mm of space at the back, allowing workers to maneuver and perform tasks. *Support for under-rack wiring An opening is provided at the bottom to accommodate under-rack wiring. Even when the base slides, the openings of the fixed base and sliding base overlap, ensuring a clear path for wiring.

• Safes, Cabinets, Lockers
• Earthquake-proof and vibration-damping equipment

*Effective use of installation space Are you having trouble installing a 19-inch rack because there is no space on the floor? You can utilize space effectively by mounting a 19-inch rack on the wall of your server room or office (it can also be installed on the floor). *Please be careful not to exceed a load of 30 kg when installing on the wall. *Improvement of security The doors are equipped with locks, and the side panels and top covers use tamper-proof screws. *Effective use of space between the mount rails and side panels Special brackets are provided to allow equipment to be mounted between the mount rails and side panels. *Support for overhead wiring An opening is provided on the top panel to accommodate overhead wiring. We also accept installation and construction requests. Please feel free to contact us.

• Safes, Cabinets, Lockers
• Earthquake-proof and vibration-damping equipment

Next-generation EIA 19-inch server rack that simultaneously pursues seismic performance and workability! It meets the standards for both NTT Docomo's artificial seismic waves and NEBS standard Zone 4 test waves, demonstrating industry-leading seismic performance! ■ Industry-leading seismic performance! (NTT Docomo standard / NEBS standard) * Robustness capable of withstanding maximum acceleration of approximately 1600 gal * High capacity with a seismic load of up to 1200 kg * "4-post" type with fewer support columns * Removable slide side panels even after installation * Design focused on attention to detail

• Safes, Cabinets, Lockers
• Earthquake-proof and vibration-damping equipment

■ Equipped with a Qi standard compatible wireless charger with usability in mind ■ Slide-type design for easy insertion and removal of devices ■ Slide-type design for easy insertion and removal of devices ■ Charging status can be easily checked at a glance

• Safes, Cabinets, Lockers

This is a bracket that converts and adjusts the mounting pitch when the mounting widths of the equipment differ. It is designed to adjust and convert the mounting pitch of equipment according to different standards such as JIS, EIA, and ETSI. It can be manufactured for each U size, so please consult us regarding the dimensions.

• Safes, Cabinets, Lockers

This is a bracket that converts IS standard mounting rails to EIA standard. It is an adjustment bracket (U-shaped bracket) for mounting EIA standard equipment onto JIS standard mounting rails (mounting angles). You can specify the U number, offset length, etc., and it can be custom-made starting from one set.

• Safes, Cabinets, Lockers

This is a server rack depth adjustment bracket (U-shaped metal fitting) designed to mount EIA standard 19-inch equipment in a front position compared to conventional mounting rails (mounting angles). It prevents interference between equipment or cables and the door. You can specify the U size, offset length, and more, and it can be custom-made starting from just one set. We have over 60 types of production achievements to date. ■ We have production achievements for U sizes ranging from 1U to 6U. Of course, we can also produce items with a higher U size. ■ The offset length can be specified in millimeters, ranging from 30mm to longer lengths such as 200mm. ■ You can choose the hole shape from options such as square holes for cage nuts or M5 screws.

• Safes, Cabinets, Lockers

■Up to 20 smartphones or tablets can be stored simultaneously. Devices with external dimensions of 20mm x 123mm x 210mm or smaller can be accommodated. ■Stacking and linking are possible in both vertical and horizontal directions. The structure allows for stacking and linking to accommodate an increase in devices in the future. The maximum storage capacity can be easily adjusted according to the usage scenario. ■You can choose whether or not to have doors based on your usage scenario. Since the security measures vary depending on the location of use, you can select whether to have doors. In places where security is a concern, doors can be installed, while in scenarios where ease of use is prioritized, the absence of doors allows for versatile applications. ■Includes cable management clamps. To organize the messy cable wiring during operation, wiring clamps are standard equipment. The storage space and cable space are separated, allowing for a neat appearance. ■The security wire prevents theft. The back of the box has mounting holes for a security wire, making it possible to prevent theft of the box itself (security wire is not included).

• Safes, Cabinets, Lockers

By blocking the dead space (gaps) in the server rack (19-inch rack) with a heat guard, we can prevent the hot air (hot aisle) expelled from the back of the equipment from circulating to the front intake side (cold aisle), thus avoiding the hot aisle reverse phenomenon. This product is referred to as a "heat shutter" by other companies. ■ Product Features - The heat guard section uses a rubber plate, allowing for flexible cabling between the front and rear sides. - It can be retrofitted to existing LK series racks that are already installed, depending on the installation situation. - It has a separate design for left-right and up-down, which enhances maintainability.

• Safes, Cabinets, Lockers

This is a mounting bracket for attaching an LCD monitor to a server rack (19-inch rack). By installing a monitor arm compatible with the VESA standard, any monitor can be mounted, and adjustments for height and angle are also possible.

• Safes, Cabinets, Lockers

Attention administrators struggling with freezes! A reliable ally that automatically reboots remotely has been born! ■ For locations that are difficult for people to access, such as remote areas or high places ■ Equipped with PORT monitoring function ■ System management possible anytime, anywhere with smartphones or tablets ■ Customization available to suit your needs Amazing high specifications! ● Network operation monitoring ● Freeze monitoring via PING and ports ● Status notifications and freeze detection via email ● Remote power control through communication ● Weekly scheduling function

• Monitoring and Control Equipment

■ Added pull-button locking feature to IEC C13⇔C14 power cable This is effective in preventing the C13 plug from being disconnected. It allows for disconnection prevention without the need for installation work such as attaching a cable clamp. ■ Compatible with power supply for various devices There are no restrictions from the manufacturer on the device side (C14 outlet side), so it is compatible with the power supply of various devices such as servers, computers, and PDUs.

• others

- The depth dimension can be adjusted from 430mm to 730mm in 25mm increments. It can be changed to the desired depth in about 5 minutes with screw fixation. - Maximum load capacity: approximately 300kg. It can accommodate heavy servers and other equipment. - Easy assembly! It can be assembled in about 10 minutes. We can also assemble it and deliver it. - A wide range of options available. With extendable support angles and extendable fixed shelves, selecting optional items is hassle-free. Casters can also be installed.

• Safes, Cabinets, Lockers

This is a key-locked server rack (19-inch rack) that complies with EIA standards, allowing rack-mounted servers to be stored vertically and treated like tower servers. Placing them directly on the floor or on a desk takes up space and poses security issues... In such cases, the "Tower Mount Box" is a product that allows for slim and secure storage of rack-mounted servers. 【Features】 - Neatly stores rack-mounted servers. - Designed in compliance with EIA standards. - Safely manages the server itself and internal data. *For more details, please request materials or view the PDF data from the download section.

• Safes, Cabinets, Lockers

Since we respond to our customers' concerns each time and create products accordingly, we have over 300 types of production achievements, including products not listed here. We can accommodate various requests regarding size, input, and output.

• others

Since we respond to our customers' concerns each time and create products accordingly, we have over 300 types of production results, including those not listed here. We can accommodate various requests regarding size and input/output.

• others

This is a drawer-type slide box that can be rack-mounted in a server rack (19-inch rack). If it has a lockable feature, it can also be used as a security measure box.

• others

- Extended door frame (depth extension for 19-inch rack) - Additional door installation (ensuring security for open rack)

• Wiring devices

Please feel free to consult us about your desired installation location, size, and material. We will manufacture it according to your specified size.

• Wiring devices

Please feel free to consult us about your desired installation location, size, and material. We will manufacture it to your specified size.

• Wiring devices

To prevent major accidents, we will prevent power supply to various parts around the server rack (19-inch rack).

• Wiring devices

It is installed at the location where heat buildup occurs inside the server rack (19-inch rack) and forcibly expels the heat from equipment that cannot be drawn out by the fan at the top of the rack. (The product in the photo is a fan unit.) It is widely used in server racks, 19-inch racks, system racks, network racks, and more.

• Internet System

If you are having trouble with wiring and cabling for server racks (19-inch racks), our products support routing of wiring in all directions: front, back, left, right, up, and down.

• Safety and consumables

We have a variety of shelves, storage racks, and cable management trays available.

• Wiring devices

This is an angle rack rail for server racks (19-inch racks). It can be extended and retracted continuously from 500 to 850 mm. It is an L-shaped angle that can accommodate various dimensions between the mounting rails of different server racks.

• Wiring devices

This is a rack for server racks (19-inch racks).

• Wiring devices

To prevent accidents such as "injuring fingertips with the stiff spring of cage nuts" and "cage nuts falling inside the rack during work" at server rack installation sites, we have developed a dedicated tool for attaching and detaching cage nuts. This compact and portable tool reduces the strain on fingertips and has received positive feedback since its launch. We have videos available on our website and Facebook, so please take a look.

• Work tools

We were using open racks for server management, but if the need arises to ensure security on a rack-by-rack basis, we can add doors with locks. ■ You can add doors while keeping the existing racks in place. ■ We also support third-party server racks (19-inch racks). ■ The additional frame can be installed with a minimum space of about 5 cm (this depends on the specifications of the rack, so a site survey is required). ■ While installing doors may raise concerns about reduced heat dissipation efficiency, we offer doors with a high opening ratio (up to 82%) to minimize obstruction of heat dissipation. ■ The locks can accommodate not only standard keys but also electronic locks. ■ Since it is possible to add doors while keeping the existing open racks, this contributes to reducing costs and time for our customers. ■ We also handle installation and replacement work. Please feel free to consult with us.

• Other security systems

This is a product that extends the depth of an existing server rack (19-inch rack) when the depth of the newly introduced mount server does not fit into it. ■ It allows for an expanded space to accommodate rack-mounted servers and other equipment while keeping the existing rack in place. ■ For older server racks (19-inch racks) with low door opening rates, it is possible to convert the doors themselves to high-opening-rate doors in conjunction with the installation of extended door frames. ■ You can choose from various door types, including acrylic doors, perforated doors, and high-opening-rate hexagonal perforated doors (up to 82%). ■ Since it allows for the replacement of only the equipment while keeping the existing rack in place, it contributes to reducing costs and time for customers. ■ It is also compatible with server racks from other manufacturers (19-inch racks) upon site survey. ■ We also handle installation and replacement work. Please consult us. ■ There are also examples of manufacturing extension side panel frames that expand space not only in the depth direction but also in the width direction.

• Safes, Cabinets, Lockers

This is a stationary rack designed to store IP devices. It has a height specification of 19 inches, allowing for the vertical storage of 19-inch servers (the photo shows a 3U type). It is a compact stationary rack that offers high versatility, making it easy to customize the internal configuration according to the equipment, as well as implement dustproof and heat dissipation measures. This product was developed in response to requests for a device that can accommodate HUBs, IP devices, and network equipment in office environments with limited space. Initially, only the sides and back were perforated, but this led to heat buildup. By also perforating the front and expanding the perforated area on all four sides, we improved heat efficiency. The perforated sections are equipped with filters for dust protection, achieving both heat dissipation and dustproof performance simultaneously. This allows for the storage and security of devices that are placed directly on the floor or shelves in offices and business locations.

• Safes, Cabinets, Lockers

This is a storage box that can be rack-mounted in a server rack (19-inch rack). If it has a locking feature, it can also be used as a security measure. It can meet your needs for storing documents, equipment, or PCs inside the rack. It is also possible to create an entry point, allowing you to store devices that need to be connected to power or network cables.

• Safes, Cabinets, Lockers

■Moving heavy equipment back and forth becomes easier, which is helpful during installation (rack mounting) and maintenance of the equipment. ■By placing the equipment on a shelf, it can be pulled in and out without using server lifts or similar devices. ■Equipped with a latch (stopper), so the shelf won't protrude when not in use. ■With a handle, it can be easily slid back and forth. ■The load capacity of the product shown in the photo is 200 kg. ■Compliant with EIA standards, it can be mounted on any server rack (19-inch rack) with a height of 2U.

• Safes, Cabinets, Lockers

This is a telescopic support angle (rack rail) that can be installed on a server rack (19-inch rack) regardless of the pitch of the mount angle. Even if the manufacturer of the 19-inch rack is unknown and you are unsure about the compatible shelves or angles, or if you purchase a used server that does not come with the original mounting rails or support angles, you can use this angle for installation. Optional shelves are also available. Additionally, we offer telescopic support angles for weight and shelves that can be adjusted in size, so please feel free to consult us.

• Subsidiary materials

With the recent spread of ICT, mobile devices such as tablets, smartphones, and laptops are being utilized in various settings, including offices, schools, hospitals, and restaurants. When managing these devices collectively rather than individually, it is necessary to implement measures to prevent theft and battery depletion. The solution to these issues is the "charging storage cabinet." The MOBILE RACK from Center Pier is a unit-based system that allows for customizable parts, unlike traditional charging storage cabinets. Even when the types of devices used, the number of units stored, and the charging methods vary by location, the unit-based design allows for the combination of parts according to those needs, enabling flexible responses to different specifications for each project.

• Safes, Cabinets, Lockers

An original compact server rack (19-inch rack) that allows for free size design. It can be customized according to customer requests, not only in size but also in color, internal specifications, and additional options. 【Features of the Compact Rack】 ◆ Perfect for SOHO! Its compact shape fits perfectly in limited spaces like SOHO. Despite its small size, it achieves the same security level as standard racks. ◆ High versatility and ease of use It can accommodate various custom sizes and colors, including cube shapes. As a center pier, it meets a wide range of customer needs. ◆ Abundant size lineup This highly versatile rack can easily be customized for dustproofing, heat dissipation, and noise reduction. Depending on the space, there are options to store 19-inch servers vertically instead of horizontally.

• Safes, Cabinets, Lockers

The FDF (Fiber Distributing Frame) is a rack that efficiently organizes optical cables, which tend to become complicated. Our FDF meets both NEBS standards and NTT Docomo's seismic standards, making it a product with enhanced seismic performance. ◆ High Seismic Resistance By combining special cross-section frames in a composite manner, we have achieved unprecedented seismic performance. It meets NTT Docomo standards R08 to R12 (displacement under 50mm) and NEBS standard Zone 4 (GR-63-CORE, displacement under 75mm). ◆ Pursuit of Ease of Work The side panels are removable, allowing for easy interconnection between racks, making it simple to consolidate a large number of optical cables. We pay attention to details such as shelf positioning and the size of numbers, down to the millimeter, to enhance the ease of work for our customers. ◆ Numerous Options We offer a variety of options to streamline work processes. By using optional fusion boxes (splice boxes), we can reduce the complexity of tasks during optical cable consolidation.

• Safety and consumables
• Water and sewerage pipe fittings
• Lightning protection

This is a 19-inch split rack designed for housing and colocation service providers. We can accommodate various split rack configurations such as 2-way, 3-way, 4-way, 8-way, 9-way, and 16-way, tailored to your needs. Since the space inside the rack is partitioned, we can provide dedicated space for each user (rack mounting is also possible). Of course, not only the space but also the power cables and communication cables are individually protected, preventing wiring issues in advance. Additionally, we offer detailed customization options such as providing space for administrators, individual key and master key specifications, and the choice of under-rack or over-rack cable entry, which has garnered support from many clients, including data center operators, telecommunications carriers, hardware vendors, and construction contractors.

• Safes, Cabinets, Lockers

19-inch Rack (Open Frame Type) for Center Pier This is an "open rack" with only columns and no doors or side panels. ■ If security is ensured at the server room level, an open rack without doors or side panels is recommended from the perspective of heat management, cooling, workability, and cost. ■ Due to its welded structure, no assembly is required, and it ensures seismic resistance and robustness. ■ Compliant with EIA standards (compatible with all server and network equipment rack mounts). ■ We offer a variety of options such as cable supports and power strip mounting brackets, allowing for customization based on your needs. ■ The photo shows a rack with dimensions H2000 x W600 x D1100, but custom sizes are available. (We accept orders from one unit to mass production.)

• Other store equipment and supplies

This model combines essential requirements for a 19-inch rack, including seismic performance, cooling performance, load-bearing capacity, and security performance, with a particular emphasis on enhanced seismic performance. It is especially suitable for supercomputers and high-performance databases that handle particularly important data, as well as communication equipment that requires high availability (continuous operation). **Features of the Seismic Server Rack** ◆ High Seismic Resistance It has a proven track record in tests based on the industry's most stringent seismic testing standards, such as "NTT Docomo Standards R08-R12" and "Kobe Wave Amplification Wave 1000gal from the Southern Hyogo Earthquake." This is the product among our 19-inch racks that places the highest priority on seismic performance. ◆ High Opening Rate In the case of hexagonal punching doors, the opening rate can reach up to 82%. By using doors with a high opening rate, it is effective for heat dissipation within the rack. ◆ Fusion of Function and Design The doors not only emphasize aesthetic beauty but also enhance strength through a folded surface structure, ensuring stability against seismic shaking.

• Safes, Cabinets, Lockers
• Earthquake-proof and vibration-damping equipment

This is one of the racks with the most customization achievements among our products. We have received support from many clients, including data center operators, telecommunications carriers, hardware vendors, and construction contractors. 【Features of the Standard Rack】 ◆ High versatility and ease of use We focused on high versatility and ease of use from an engineer's perspective, anticipating compatibility with all types of equipment and systems. ◆ Wide range of sizes Since we can accommodate individual requests, we can manufacture racks tailored to customer specifications regarding height, width, depth, and opening ratio. ◆ Extensive delivery record We provide high reliability and peace of mind to our customers with over 3,000 delivery records, including major telecommunications operators and data center providers.

• Safes, Cabinets, Lockers