サメス List of Products and Services

The "NanoBell 2" is a bell-shaped painting machine designed for robots, miniaturized and lightweight for small robots. It is easy to detach and disassemble, allowing for easy access to valves and fittings for maintenance. Both hollow and solid types of robot wrists can be selected. Additionally, it can save 20-50% of paint compared to conventional products, and with Hi-TE technology, it allows for more pattern painting control. 【Features】 ■ Modular design for easy maintenance ■ High-quality finishing paint ■ Achieves high coating efficiency *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Nano Gun Air Mix" is an electrostatic manual spray gun designed with a minimal number of parts, allowing anyone to use it immediately after installation without complicated adjustments. This product, which has undergone improvements, boasts excellent efficiency as a non-electrostatic painting spray technology, achieving a high coating efficiency of up to 86% (±2%). With outstanding finishing capabilities, high reliability, and a design based on advanced ergonomics, it has also succeeded in other markets that require stringent standards, such as railways, aerospace, renewable energy, machine tools, and other general work. 【Features】 ■ High-quality finish ■ High productivity due to high coating efficiency ■ A wide variety of rich tip types ■ Pursuit of comfort based on ergonomics, contributing to fatigue reduction ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Nano Gun" is a manual electrostatic spray gun that uses both high current and high voltage. By combining the optimal charging of the paint with efficient application to the target area, the coating efficiency can be improved by up to 20% compared to conventional gun designs. 【Features】 ■ Reduces operator fatigue and allows for comfortable operation ■ Significantly saves on paint and air ■ Accommodates a wide range of paint discharge volumes, both large and small ■ Demonstrates excellent performance in high-productivity lines ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Auto Mach Jet" is a painting machine designed for powder coating in general industry. Typically, it is used as a fixed station within high-speed color change booths such as the PVV EasyDrive. It can also be installed in reciprocators within the PVV EasyCompact booth. 【Features】 ■ High painting quality - Easy precise setup of voltage and current - Excellent painting on complex-shaped parts ■ Easy maintenance - Simple sprayer disassembly - Profile design that allows for easy cleaning with just air blowing - Nozzle has high wear resistance *For more details, please refer to the PDF materials or feel free to contact us.

• others

"Excite Light" is a manual spray gun that emphasizes lightweight, simplicity, and mobility. With excellent spray quality and a high coating efficiency (up to 86%), it is suitable for spraying complex-shaped parts. To maximize performance, we offer two specifications: 60 bar and 120 bar. 【Features】 ■ 30% weight reduction without compromising the balance of the gun ■ Compact design allows easy access to recessed areas and complex-shaped parts ■ Soft trigger reduces the risk of conditions like tendonitis ■ No pattern adjustment needed *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is a high-speed rotating bell for Robotech painting machines that accommodates various products and painting processes. The "PPH 707SB" is a solvent electrostatic painting machine with internal application technology, applying the technology of high-speed rotating turbines and magnetic bell cups. The "PPH 707SB-2K" is a two-component solvent electrostatic painting machine with internal application technology, where the static mixer is positioned before the injector, contributing to the reduction of mixed paint. It also accommodates various two-component systems. 【Features of PPH 707SB】 ■ High performance ■ Flexibility ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is an airless automatic spray gun that offers excellent atomization at medium or high discharge rates while minimizing paint waste. It is an extremely lightweight automatic airless gun in the industry with a base plate design, which helps reduce bearing fatigue on automatic machines that carry the painting equipment. Additionally, its compact design allows for easy access to tight spaces. It is suitable for applying harsh coatings (acid catalysts, UV coatings), water-based materials, high-viscosity substances, and abrasives. 【Features】 ■ Auto gun in the market that reduces fatigue on painting equipment ■ Compact design for easy integration ■ Quick maintenance and simple assembly (only 14 parts) ■ Reduction in maintenance costs ■ Robustness due to anodized body rigidity ■ Stainless treatment of liquid contact parts allows compatibility with various materials *For more details, please refer to the PDF document or feel free to contact us.

• others

The "A35 HTI/HPA" is a spray technology developed by Sames Kremlin, which has achieved the best coating efficiency and film quality in the industry over many years, specifically for high-performance paint exhibitions. The ultra-low pressure "HTI" delivers optimal film quality and coating efficiency while complying with environmental protection standards. The low-pressure "HPA" can achieve film quality that has been difficult to attain until now through powerful atomization, accommodating a variety of materials, including high-viscosity substances. 【Features】 ■ High productivity: Stable and high valve opening and closing performance ■ Fully compatible with water-based paints: All stainless steel joints ■ Extensive nozzle variations ■ Significantly reduces the speed of paint particles, improving coating efficiency ■ Trusted film quality backed by proven results in the automotive industry ■ Compatible with various painting methods, including handguns and automatic machines *For more details, please refer to the PDF document or feel free to contact us.

• others

The "AIRLESS 40C50" is a paint pump suitable for airless applications, designed to be economical with low air consumption. It is a high-efficiency pump that maximizes energy efficiency and is suitable for 1.5L per minute. Additionally, it features a dead zone-free design for quick cleaning and product switching. 【Features】 ■ Thick suction and high compression ratio ■ All wetted parts are made of stainless steel ■ Simple design significantly reduces the number of parts *For more details, please refer to the PDF document or feel free to contact us.

• others

The "AS100" is a powder flowability measuring device designed to measure the fluidization of powder coatings, which affects the performance of powder coating. This product indicates whether the powder coating is in a suitable state for spray painting or powder transport. It is widely used in powder coating work sites, quality control at paint and material manufacturers, and facilities such as powder coating testing labs. 【Features】 ■ Rapid and accurate measurement quantified ■ Easy and ready to use ■ Extensive track record in powder laboratories and similar settings *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Leg Master" is a high-pressure regulator specially designed for high-viscosity materials, suitable for hygroscopic materials and water-based materials, featuring a diaphragm design. Its modular design allows for control across a wide range of pressures. Additionally, we offer heating regulators (24V or 220V), SST regulators, and special regulators for highly abrasive materials upon request. 【Features】 ■ Extremely high precision even at low pressure ■ Excellent repeatability ■ Easy maintenance *For more details, please refer to the PDF document or feel free to contact us.

• others

Significant reduction in paint loss with minimal investment (20-30% reduction in paint usage compared to air spray), early cost recovery through shortened painting and cleaning times, and reduced health risks for staff and environmental protection due to decreased solvent use. 【Features】 ■ Easily paint hard-to-reach areas such as the corners of boxes. ■ Drastically reduced overspray, improving work efficiency with high penetration. ■ Minimizes overspray by controlling paint particle speed. Utilizing dual micro-particle technology, our unique method maximizes the control of paint particle speed. The air mix pump set allows for immediate painting once air is supplied! It is a simple painting gun and pump set that anyone can use. 【Set Contents Example】 - Air mix painting hand gun (for 120 bar) - 10:1 pump - Paint hose (7.5 m) - Air hose (7.5 m) - Suction rod - Nozzle tip (0609 size) The latest air mix technology balances high paint application efficiency and high film quality. Please compare with other manufacturers. ★ We are available for test demonstrations anytime, anywhere. (Output of 40-120 cc per minute) *For more details, please download the catalog or contact us.

• others

"Inovel" is an electrostatic powder bell coating machine that employs rotary painting technology. It can detect the bell speed and maintain a constant speed, allowing for stable coating. Additionally, it reduces the number of joints and enables easy assembly, featuring a single block design with fewer parts. It allows for painting on various types of workpieces, but it is particularly effective on flat panels. 【Features】 ■ No need for high-voltage cables, integrated high-voltage unit ■ Easy-to-disassemble powder bell ■ Adjustable air shroud ■ Quickly forms the appropriate spray size ■ Excellent and consistent film formation *For more details, please refer to the PDF document or feel free to contact us.

• others

The "AIRMIX EOS 15-C25 & 30-C25" is an air mix paint pump characterized by extremely low pressure start-up, consistent supply, and pulsation-free operation, providing excellent finishing. The liquid section is designed to accommodate a wide range of viscous materials, reducing material loss during flushing and allowing for quick color changes. 【Features】 ■ Low air consumption ■ Sealed structure - No risk of injury - Protects lubricants from foreign matter intrusion - Easy-to-use rotating outlet fitting ■ No assembly required tie rod ■ Design eliminates dead zones *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Liquid Regulator for Coating" is a manual pressure regulator suitable for situations requiring high precision pressure control. It ensures stable material supply even during continuous pressure control. It is designed to accommodate materials ranging from low to medium viscosity. 【Features】 ■ High precision pressure control ■ Easy cleaning due to surface treatment of wetted parts ■ Compatible with water-based paints ■ Equipped with a pressure gauge *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Flowmax 17A2・34A2" is a pump designed to transport materials that contain moisture-absorbing agents and water-based materials. Thanks to its unique design with an external valve, maintenance has become extremely easy. It does not require lubricants, has a long service life, and is highly reliable. 【Features】 ■ Extended service life ■ No lubricants required ■ High reliability ■ Easy maintenance with a design featuring an external valve *For more details, please refer to the PDF document or feel free to contact us.

• others

"Shamesulub" is a lubricant spray that can be used for fin, tube machining, press tools, and more. With a design that applies electrostatic coating technology, it achieves a coating efficiency of over 98% by avoiding excessive application. Since post-processing of the lubricant (degreasing and cleaning) is unnecessary, it saves energy. It not only reduces maintenance but also contributes to improving safety in the workplace. [Features] ■ High coating efficiency ■ Accurate low discharge volume control ■ Minimization of workspace ■ Easy integration into equipment ■ Modular design *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "e-Jet2" is a manual powder coating gun that produces a stable pattern and improves coating efficiency. In addition to the ergonomically designed gun, the trolley is simple, easy to use, and compact, enhancing operability. It offers a wide variety of nozzle types, making it suitable for various powder applications. 【Features】 ■ High coating efficiency ■ Stable pattern ■ Compact and user-friendly trolley ■ Easy-to-read display and controls *For more details, please refer to the PDF document or feel free to contact us.

• others

The "FPRO Air Spray" is a pressure-fed manual gun that allows for easy professional painting. Thanks to its unique technology, it significantly reduces the scattering speed of paint particles, greatly improving coating efficiency. Additionally, the vortex technology enhances the penetration of paint particles, making it possible to paint complex-shaped objects. 【Features】 ■ Easy to operate ■ Achieves a high coating efficiency of 78% ■ Three air caps ■ Abundant accessories *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SFLOW 275&450" is an airless spray gun designed for high-quality atomization and high productivity. It comes with a wide variety of flat or reversible tips to accommodate various applications. The trigger features a stable grip and is designed to reduce fatigue, allowing for a more comfortable painting experience. 【Features】 ■ 81% high transfer efficiency ■ High-quality atomization ■ Designed for high productivity ■ Suitable for various applications ■ Easy filter replacement with dedicated tools *For more details, please refer to the PDF document or feel free to contact us.

• others

The S1 is a heavy-duty, high-durability pump that uses a free-flow check plate. The reversible check plate doubles its lifespan. In addition to handling ultra-high viscosity materials up to 15,000,000 CPS, it can also withstand high temperatures of up to 200°C thanks to its special throat seal. 【Features】 ■ Uses a free-flow check plate ■ Doubles lifespan with a reversible sheet ■ Compatible with ultra-high viscosity materials ■ Can withstand high temperatures of up to 200°C ■ Equipped with a special throat seal *For more details, please refer to the PDF document or feel free to contact us.

• Air compressors, blowers and pumps