コンサス List of Products and Services

We would like to introduce our magnet strainer/magnet trap 'MG-S/MG-MS'. Designed for sanitary specifications, it features a polished finish and an eccentric structure, ensuring no liquid pooling and maintaining hygiene. It removes fine iron powder and SUS wear powder from the piping, preventing contamination of the fluid. The number of magnets can be adjusted, and we can manufacture in various sizes, so please feel free to contact us when you need assistance. 【Features】 ■ Material: Stainless Steel 304/316L ■ Size: 1.5S・2S ■ Finish: Internal and external surface buff polishing (electropolishing available as an option) ■ Connection: Ferrule (standard)/male thread/nut/others ■ Surface magnetic flux density: 10,000 Gauss (high magnetic type available as an option) ■ Maximum environmental temperature specification: 120℃ (heat-resistant type available as an option) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our pressure gauge reducing port ball valve 'CSG'. It features a one-piece body and a reducing port structure, making it suitable for pressure gauges at the inlet side (Rc) and outlet side (G). Oil-free treatment (Consa standard) is also available. 【Features】 ■ Body material: Stainless steel 316 ■ Seat material: N-PTFE ■ Sizes: 8A, 10A ■ Structure: One-piece body, reducing port *For more details, please refer to the PDF document or feel free to contact us.

• others

The "2L-O" is a hygienic one-touch clamp that produces almost no metal dust due to the absence of wear on the screw part. Simply tilt the lever for easy one-touch operation. The time required for clamp installation is significantly reduced, improving work efficiency. Compared to screw-tightening types, there is no seizing in the screw part, making it durable for repeated use. Since it is lever-type, the tightening torque remains consistent, preventing damage to the gasket. 【Features】 ■ Material: Stainless Steel 304 ■ Sizes: 1S, 1.5S, 2S ■ Operating Pressure: Below 1MPa ■ Significantly reduces clamp installation time, improving work efficiency ■ Durable for repeated use due to the absence of seizing in the screw part *For more details, please refer to the PDF document or feel free to contact us.

• others
• Work tools

The "CRV" is a relief valve that is compact, lightweight, and features simplified components, offering excellent cost performance. The body material is stainless steel 316, and the seat material is PTFE, with a size of tapered male thread (Rc) 15A. It is suitable for containers and small to medium-sized vessels, and it releases pressure when the set positive pressure (standard 30kPaG) is reached. 【Features】 ■ Body material: Stainless steel 316 ■ Seat material: PTFE ■ Size: Tapered male thread (Rc) 15A ■ Releases pressure when the set positive pressure (standard 30kPaG) is reached ■ Compact, lightweight, with simplified components, and excellent cost performance *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our threaded socket for pipe fittings, the 'FPS'. It has a parallel thread (Rp) cut for pipes, allowing for the conversion of threaded connections to flare connections. The finish is a machined surface on both the inside and outside, with options for buff polishing and electropolishing available. Additionally, the dimensions between the faces are thickened (21L) to prevent the threads from protruding on the backside. 【Features】 ■ Material: Stainless Steel 304/316L ■ Finish: Machined surface on both inside and outside (options for buff polishing and electropolishing available) ■ Standard: Parallel thread for pipe taper (Rp) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our company's threaded adapter for Heller pipes, the 'FA-R'. The material is SUS304/316L. The finish is a machined finish on both the inner and outer surfaces, with options for buff polishing and electropolishing available. We can also manufacture sizes other than those listed in the dimension table, so please feel free to contact us for inquiries. 【Features】 ■ Material: SUS304/316L ■ Finish: Machined finish on inner and outer surfaces (buff polishing and electropolishing available as options) ■ Thread standard: Tapered thread (R) ■ Custom sizes available beyond the dimension table *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our hose adapter 'FA-H' that we handle. The material used is stainless steel 304/316L. The finish is a buff finish on both the inner and outer surfaces, and electropolishing is available as an option. Additionally, we can also manufacture different diameter types to match the inner diameter of your hose, so please feel free to contact us when you need assistance. 【Features】 ■ Material: Stainless steel 304/316L ■ Finish: Buff finish on inner and outer surfaces (electropolishing available as an option) ■ Different diameter types can also be manufactured to match the inner diameter of your hose *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our company's Heller Couplers / Heller Adapters 'DSF / ASF'. The sizes available are 25Ax1S, 40Ax1.5S, 50Ax2S, and 50Ax2.5S. The finish includes machining on both the inner and outer surfaces, and buffing on the inner surface of the welded areas. The material is stainless steel 316, and the standards are unified under A-A-59326-1998, ensuring compatibility with products from other manufacturers. 【Features】 ■ Material: Stainless Steel 316 ■ Sizes: 25Ax1S, 40Ax1.5S, 50Ax2S, 50Ax2.5S ■ Finish: Machined finish on inner and outer surfaces, buffed finish on the inner surface of the welded areas (DSF has a cast surface on the coupler part) ■ Standards: Unified under A-A-59326-1998, compatible with products from other manufacturers *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CBV" is a breather valve suitable for containers and small vessels. When the set positive pressure (standard 30kPaG) is reached, it releases pressure, and when the set negative pressure (-10kPaG) is reached, it introduces atmospheric air to prevent accidents before they occur. It can also be manufactured for other pressures as an option (positive pressure side only). Please feel free to contact us when you need it. 【Features】 ■ Body material: Stainless steel 316 ■ Seat material: PTFE ■ Size: Tapered screw (R) 25A ■ When the set positive pressure (standard 30kPaG) is reached, it releases pressure, and when the set negative pressure (-10kPaG) is reached, it introduces atmospheric air to prevent accidents before they occur. ■ Other pressures can be manufactured as an option (positive pressure side only). * For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our flange couplers/flange adapters 'DF/AF'. The material is SUS316, but other materials can also be manufactured. The specifications are based on the U.S. MIL-A standard A-A-59326-1998. Please feel free to contact us when you need assistance. 【Features】 ■ Material: SUS316 (other materials can also be manufactured) ■ Specifications are unified to A-A-59326-1998 ■ Flange standard is standard JIS 10K flange (other sizes can be manufactured) ■ Eccentric types can also be manufactured *For more details, please refer to the PDF document or feel free to contact us.

• others

The "MG-PS" is designed to fit between the flanges of a hygienic elbow and is a magnetic strainer that can be easily replaced with existing piping. I want to use a strainer, but I don't have time for construction. I only use it occasionally, so I want to remove it when it's not needed... This is perfect for such situations! Our unique magnetic welding technology achieves excellent cost performance. The maximum operating temperature is 100°C, and a heat-resistant type is available as an option. 【Features】 ■ Material: Stainless Steel 316L ■ Size: 1.5S, 2S ■ Finish: Buff polished inside and out (electropolishing available as an option) ■ Connection: Hygienic flange (standard) / male thread / nut / others ■ Surface magnetic flux density: 10,000 Gauss (high magnetic force type available as an option) ■ Maximum operating temperature: 100°C (heat-resistant type available as an option) *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our screw-in reduced port ball valve 'CSE'. It is washable without oil. Made of stainless steel 304 (sizes 8A to 50A), it offers excellent cost performance and can be used in a wide range of applications. The seat and packing are made of R-PTFE, allowing compatibility with various fluids, and it comes with an optional butterfly handle (T-handle for sizes 8A to 25A). 【Features】 ■ Body material: Stainless steel 304 ■ Seat and packing material: R-PTFE ■ Sizes: 8A, 10A, 15A, 20A, 25A, 32A, 40A, 50A ■ Structure: One-piece body, reduced port ■ Oil-free treatment (Consa standard) is also possible *For more details, please refer to the PDF document or feel free to contact us.

• others

The "TS" is an inline tube strainer that connects in the middle of piping. The mesh of the filtration screen can be produced from 5 to 400 mesh. As special items, wedge wire and notch wire can also be manufactured, and options include magnets that remove fine iron particles and stainless steel wear powder, as well as models with handles. 【Features】 ■ Material: Stainless Steel 304/316L ■ Gasket Material: EPDM/PTFE/Silicone/FPM/NBR ■ Sizes: 1S, 1.5S, 2S, 2.5S, 3S ■ Finish: Internal and external #400 buff polished finish ■ Connection: Heli-coil, male threads, nuts, and others *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CSH" is a three-piece full port ball valve designed for easy removal during piping and maintenance due to its lightweight and compact design. The gland section has a special structure, allowing our actuators to be assembled without a yoke. The gland section features a double structure with an O-ring and gland packing, ensuring excellent sealing performance. Connection types available include "screwed," "butt welding," and "socket welding." 【Features】 ■ Body material: Stainless steel 316 ■ Seat material: PTFE ■ O-ring material: FKM (other materials are also available) ■ Sizes: 15A, 20A, 25A, 32A, 40A, 50A ■ Structure: Three-piece body, full port *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SB-O" is a shower ball with a recommended operating pressure of 0.2 MPa. It features a #400 polished finish on the outer surface, and an electropolished finish is available as an option. We can manufacture according to your specifications for special shapes, special spray patterns, number of holes, hole diameters, and shower ball mounting nozzles. 【Features】 ■ Material: Stainless Steel 316L ■ Sizes: 15A, 1S, 1.5S ■ Connection: Pin fastening (standard), threaded, welded ■ Surface finish: - Outer surface #400 polished finish (standard) - Electropolished finish (optional) *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CBA/CBE" is a sanitary butterfly valve made from stainless steel 304 and 316L for the main body material. It features a simple structure with few components, making disassembly and assembly easy. The "CBA" pull bundle allows for three levels of opening adjustment from fully closed to fully open, while the "CBE" grip handle allows for five levels of opening adjustment (in 18° increments) from fully closed to fully open. 【Features】 ■ Main body material: Stainless steel 304, stainless steel 316L ■ Seat material: EPDM (standard) / Silicone (optional) * The seat complies with the Food Sanitation Act (Ministry of Health, Labour and Welfare Notification No. 370) ■ Sizes: 1S, 1.5S, 2S ■ Simple structure with few components, making disassembly and assembly easy * For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We have sizes from 1S available, but other sizes can also be produced. Please contact us separately for inquiries. 【Lineup】 ■ Catch net / Catch filter ■ Catch plate ■ Catch basket ■ Between gasket (dedicated gasket) *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We handle the sight glasses "SG-I / SG-W." The inline type (SG-I) allows for a quick view of the fluid's state, while the window type (SG-W) is suitable as a viewing window for tanks and similar applications. The inline type can be equipped with optional wire mesh or acrylic for glass shatter prevention. 【Features】 ■ Main material: Stainless steel 304 / 316L ■ Glass material - Inline type: Pyrex glass / acrylic / others - Viewing window type: Tempax glass / tempered glass / acrylic / others ■ Gasket material - Inline type: EPDM / silicone / others - Viewing window type: Silicone / EPDM / others ■ Connection: Ferrule / male thread / nut / others *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

We handle the Arm Lock Adapter Integrated 10K Flanged Ball Valve 'CSJ-C10'. It features a full-port structure with low pressure loss. The outlet side is equipped with an arm lock integrated based on U.S. MIL specifications, and it is compatible with other manufacturers' products. As an option, we also offer a stainless steel handle type. 【Features】 ■ Body Material: Stainless Steel 304/316/316L ■ Seat Material: N-PTFE ■ Handle Material: FC/Stainless Steel (Optional) ■ Sizes: 15A, 20A, 25A, 40A, 50A ■ Specifications: Full-port structure with low pressure loss *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "CSM" is a sanitary mini ball valve with a three-piece body and full port structure. It features an interior #400 buff polished finish. Electropolishing of the flow path section is available as an option. There are holes in the ribs at the bottom of the handle for easy attachment of tag plates and securing the handle. Additionally, we also offer the sanitary mini ball valve "CSM" with an actuator. 【Features】 ■ Body Material: Stainless Steel 316L ■ Seat Material: N-PTFE ■ Sizes: 8A, 10A, 15A ■ Structure: Three-piece body, full port ■ Finish: Interior #400 buff polished finish *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CSS" is a sanitary ball valve with an internal #400 buff polished finish. Due to its bottle-tight structure, it can be easily disassembled and cleaned while still piped. It features a cavity seat design, minimizing liquid accumulation inside the valve. Additionally, the connection shape can be changed by replacing the end cap. We also offer the sanitary ball valve "CSS" with an actuator. 【Features】 ■ Body Material: Stainless Steel 316 ■ Seat Material: PTFE ■ O-Ring Material: FKM (other materials are also available) ■ Sizes: 1S, 1.5S, 2S, 2.5S (2.5S is made to order) ■ Structure: Three-piece / Full port (1S to 2S) / Reduced port (2.5S) ■ Finish: Internal #400 buff polished finish *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CBS" is a sanitary butterfly valve with an actuator. It has a simple structure, with few components, making disassembly and assembly easy. The supply operating air pressure ranges from 0.4MPa to 0.7MPa, and the operating modes are single-acting and double-acting. Options include limit switches and solenoid valves. 【Features】 ■ Body material: Stainless steel 304, Stainless steel 316L ■ Seat material: Silicone (standard), EPDM (optional) 　※ The seat complies with the Food Sanitation Act (Ministry of Health, Labour and Welfare Notification No. 370) ■ Sizes: 1S, 1.5S, 2S, 2.5S, 3S ■ Supply operating air pressure ranges from 0.4MPa to 0.7MPa *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CSH-NW" is a full-port ball valve with an actuator and NW flange. Due to its lightweight and compact design, it is easy to remove during piping and maintenance. The gland section has a double structure with an O-ring and gland packing, ensuring good sealing performance. Additionally, we offer options such as proximity switches, limit switches, and solenoid valves. 【Features】 ■ Body Material: Stainless Steel 316 ■ Seat Material: N-PTFE ■ O-ring Material: FKM (other materials are also available) ■ Sizes: NW16, NW25, NW40, NW50 ■ Structure: Three-piece body, full port ■ Connection: NW flange for vacuum use *For more details, please refer to the PDF document or feel free to contact us.

• others

The "CSJ" is a valve driven by an actuator-equipped air cylinder. Electromagnetic valves, limit switches, etc., can also be installed. The operating forms are single-acting and double-acting. The supply operating air pressure is 0.4MPa to 0.7MPa. 【Features】 ■ Body material: Stainless steel 304, 316, 316L ■ Seat material: N-PTFE ■ Sizes: 15A, 20A, 25A, 32A, 40A, 50A, 65A, 80A, 100A ■ Structure: Two-piece body, full port ■ Face-to-face dimensions comply with ASME B 16.10 and JIS B 2002 ■ Equipped with a pressure relief hole for safety *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "MG-LS" is an L-shaped magnetic strainer that allows for the attachment and detachment of magnets while still in the piping. The bead is completely cut up to the base of the magnetic rod. This ensures smooth liquid flow and maintains hygiene. Additionally, it removes fine iron powder and SUS wear powder from the piping, preventing contamination of the fluid. 【Features】 ■ Removes fine iron powder and SUS wear powder from the piping, preventing contamination of the fluid ■ Sanitary design with polished finish ■ Eccentric structure that eliminates liquid pooling, ensuring hygiene ■ Allows for the attachment and detachment of magnets while still in the piping ■ An optional cover is available for easy cleaning of the magnets *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures
• Piping materials (copper pipes, cast iron pipes)
• Piping materials (plastic pipes)

The "CSR" is a screw-in reduce port ball valve with a wide range of sizes available. Oil-free cleaning is also possible. The wetted parts are made of stainless steel 316, and the seat is made of N-PTFE, allowing compatibility with various fluids. Additionally, this product features a one-piece body and a reduce port structure. 【Features】 ■ Body material: Stainless steel 316 Seat material: N-PTFE ■ Sizes: 8A, 10A, 15A, 20A, 25A, 32A, 40A, 50A ■ Structure: One-piece body, reduce port ■ Operation: Lever handle, lock handle, T-handle (8A to 20A) ■ Oil-free treatment (Consa standard) is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "CSF-PS2" is a screw-in full port ball valve that can also be treated for oil-free processing (Consa standard). The body material is stainless steel 316, and the seat material is PTFE. As options, you can choose a lock handle, flat handle, or butterfly handle. Additionally, we also offer the "CSF-PS3," which has a high-grade 316L body material. 【Features】 <CSF-PS2> ■ Body material: Stainless steel 316 Seat material: N-PTFE ■ Sizes: 10A, 15A, 20A, 25A, 32A, 40A, 50A ■ Structure: Two-piece body, full port ■ Oil-free processing (Consa standard) is also possible ■ Options available for lock handle and butterfly handle *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "CSZ" is a two-piece body, full-port structure threaded full-port ball valve. The seat is made of PTFE, making it compatible with various fluids. The body material is stainless steel 304 (with a green handle cover), offering excellent cost performance and suitable for a wide range of applications. 【Features】 ■ Body material: Stainless steel 304 Seat material: PTFE ■ Sizes: 10A, 15A, 20A, 25A, 40A, 50A ■ Structure: Two-piece body, full-port ■ Oil-free treatment (standard for Consus) is also available ■ As an option, a locking handle and flat handle are available only for 50A *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "CSF-NS2/CSR-NS2" is a screw-in ball valve compatible with NPT (National Pipe Tapered Thread) standards. Oil-free treatment (Concess standard) is also possible. The body material is stainless steel 316, and the seat material is N-PTFE. The body features a laser engraving of "NPT" for easy identification. 【Features】 ■ Body material: Stainless steel 316 ■ Seat material: N-PTFE ■ Sizes ・8A, 10A, 15A, 20A, 25A (CSR-NS2) ・25A, 40A, 50A (CSF-NS2) ■ Oil-free treatment (Concess standard) is also possible *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

At Consus Co., Ltd., we handle overseas standard fittings (3A, DIN, SMS, RJT). You can download drawings from our website. We also accept orders for conversion fittings compatible with fittings distributed in Japan, so please feel free to contact us. 【Lineup】 ■ 3A Standard: U.S. Dairy Standard ■ DIN Standard: German Industrial Standard ■ SMS Standard: Swedish Industrial Standard ■ RJT Standard *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "CNW" is a screw-in swing check valve with a swing-type structure. The materials are stainless steel 304 and 316. Sizes range from 15A to 50A. It can be used in both horizontal and vertical orientations. Additionally, we offer a range of products including the screw-in gate valve "CMW" and the screw-in globe valve "CGW." 【Features】 ■ Structure: Swing type ■ Connection: Screw-in Rc (JIS B 0203) ■ Usable in horizontal and vertical orientations ■ Material: Stainless steel 304, 316 ■ Size: 15A to 50A *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

This catalog features "vacuum fittings." Please make use of it for selecting products. 【Contents (excerpt)】 ■ NW fittings ■ ICF fittings ■ JIS fittings ■ ISO fittings ■ Other vacuum piping components *For more details, please refer to the PDF document or feel free to contact us.

• Work tools
• Fittings

The "CMW" is a screwed bonnet structure screw gate valve. Operation is performed using a round handle (non-rising stem), and the packing section uses PTFE-filled expanded zinc braid. In addition, we also offer the screwed globe valve "CGW" and the screwed swing check valve "CNW." 【Features】 ■ Structure: Screwed bonnet, internal thread type ■ Operation: Round handle (non-rising stem) ■ Connection: Screwed RC (JIS B 0203) ■ Packing: PTFE-filled expanded zinc braid *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

At Consus Co., Ltd., we handle vacuum piping fittings called 'NW'. Our lineup includes the "304 NW Short Flange," "304 Blank Flange," and "316L/Buna Center Ring," among others. Additionally, we offer a wide range of vacuum components such as "VF/VG Flanges" and "ISO-MF Flanges." Please feel free to contact us for more details. 【Lineup】 ■NW-16 ■NW-25 ■NW-40 ■NW-50 *For more details, please refer to the PDF materials or feel free to contact us.

• Work tools

The "CSH-NW" is a ball valve with an NW flange connection designed for easy removal during piping and maintenance due to its lightweight and compact design. The gland section features a double structure with an O-ring and gland packing, ensuring excellent sealing performance. It can also be automated with air drive. 【Features】 ■ Lightweight and compact design ■ Easy removal during piping and maintenance ■ Gland section with a double structure of O-ring and gland packing ■ Excellent sealing performance ■ Can be assembled with our actuator without a yoke *For more details, please refer to the PDF document or feel free to contact us. Semiconductors, semiconductor manufacturing equipment.

• Work tools

Consa Corporation is a design and manufacturing company specializing in stainless steel valves and special fittings. We can produce everything from parts to machinery, including injection pipes, strainers, unions, nozzles, and various adapters, even in single units. We also accommodate various finishes such as machining, welding, buff polishing, and electropolishing. Please feel free to contact us. 【Product Lineup】 ■ Injection Pipes ■ Reducer Unions ■ Nozzles ■ Pitael Strainers ■ Mesh Split Strainers, etc. *For more details, please refer to the PDF document or feel free to contact us.

• Fittings

Consus Co., Ltd. is a manufacturer of piping materials such as valves and fittings. While there are many valve manufacturers, we have the strength to develop unique products that are not available from other companies. We often produce a wide variety of small lots tailored to each customer, and it is not uncommon for us to design products based on customer requests. At Consus, we manufacture products that meet our customers' specific applications. If you provide us with detailed usage information, we can also make suggestions from our side. Please inquire about products not listed in the catalog. 【Products Offered】 ■ Y-type jacket valve ■ 63K valve ■ Breather valve ■ Tank bottom valve ■ Titanium valve ■ Angle valve, etc. *For more details, please download the PDF or feel free to contact us.

• Water supply facilities
• Drainage and ventilation equipment

If you are looking for stainless steel valves and sanitary fittings, please take a look. *For more details, please refer to the PDF document or feel free to contact us.

• Fittings

Consus Co., Ltd. is a design and manufacturing company specializing in stainless steel valves and special fittings. We have a manufacturing and development base in Japan, as well as a manufacturing plant in Taiwan, and we respond to various customer needs with a MADE WITH JAPAN system. In response to our customers' voices of "I wish there was a product like this," we develop accurate original products even in small lots and with short lead times. This is our approach to manufacturing. 【Business Activities】 ■ Manufacturing and sales of stainless steel valves, various valves, and accessories ■ Sales of piping materials, stainless steel castings, pumps, and industrial machinery ■ Import and export related to the above items and sales ■ Design, construction, and sales of kitchen equipment and facilities ■ Design, production, and construction of interior and exterior metal works for buildings ■ Practical agency services for sales promotion activities *For more details, please refer to the PDF materials or feel free to contact us.

• Fittings
• pump
• Metalwork

The "CBED" is a split-type sanitary butterfly valve that significantly improves the efficiency of cleaning and maintenance tasks. By adopting a clamp structure for the body, it makes disassembly of the valve easy, greatly reducing the effort required for replacing the valve body and seat ring, as well as for cleaning. The seat ring is made of EPDM (standard), with silicone available as an option. It also complies with the Food Sanitation Act (Ministry of Health and Welfare Notification No. 370). 【Features】 ■ Easy disassembly and assembly ■ Significantly improved work efficiency ■ Complies with the Food Sanitation Act (Ministry of Health and Welfare Notification No. 370) ■ The grip handle allows for 90° adjustment in five steps (18° increments) from fully closed to fully open ■ Material is stainless steel 316L *For more details, please request documentation or view the PDF data available for download.

• Water supply facilities
• Drainage and ventilation equipment

The "CAV Series" is a pneumatically operated automatic valve that offers a wide variety of lineups to choose from according to your needs. It features a compact design, with a reduced size compared to conventional products. (Compared to our products, excluding some items) We also offer the option to purchase only the cylinder, so please feel free to contact us. 【Features】 ■ Abundant lineup ■ Available for small diameters from 8A to 100A ■ Option to purchase only the cylinder ■ Compact design ■ Multifunctional options *For more details, please refer to the catalog or feel free to contact us.

• Drainage and ventilation equipment
• Water supply facilities

The "CSS-FX1" is a titanium sanitary ball valve with excellent corrosion resistance. It can handle highly corrosive liquids, expanding the selection range. It features a three-piece full body, full port structure, and a ferrule type, and due to its bolted structure, it allows for disassembly and cleaning. It adopts a cavity seat, minimizing liquid accumulation inside the valve. The inner surface is finished with buff polishing for hygiene. 【Features】 ■ Lightweight ■ Resistant to expansion ■ Excellent corrosion resistance ■ Odor prevention ■ Low thermal conductivity *For more details, please refer to the catalog or feel free to contact us.

• Drainage and ventilation equipment
• Water supply facilities

The "Strainer with Sight Glass" is a sanitary device used to prevent equipment failure due to foreign matter contamination, installed in front of the equipment for the purpose of foreign matter removal. Since you can check inside the mesh, it is hygienic and allows you to know when cleaning is needed, and the element can be attached and detached while still connected to the piping. Produced as part of our original Pitael series, it fits perfectly between standard 90° elbow faces. Additionally, you can confirm that foreign matter has been removed. 【Features】 ■ Integration of sight glass and strainer ■ Ability to confirm the removal of foreign matter ■ Easy to understand when cleaning is needed ■ Various glass and gasket materials can be selected *For more details, please refer to the catalog or feel free to contact us.

• Sanitary fixtures
• Piping materials (copper pipes, cast iron pipes)
• Piping materials (plastic pipes)

The "DF" is a split-type element with a buff-polished finish on both the inner and outer surfaces, and it can optionally be electropolished. It is compatible not only with our standard strainers but also with custom dimensions. Even if the mesh is damaged, there is no need for re-stretching work; simply replacing the mesh reduces running costs. Additionally, by allowing the mesh to be removed, the cleaning efficiency is significantly improved. 【Features】 ■ Material: Stainless Steel 316L ■ Size: Made to fit the housing ■ Mesh count: 10M to 400M ■ Punching holes: 0.5φ to 10φ ■ Finish: Buff-polished on inner and outer surfaces (electropolishing available as an option) *For more details, please refer to the PDF document or feel free to contact us.

• Sanitary fixtures
• Piping materials (copper pipes, cast iron pipes)
• Piping materials (plastic pipes)