栃木屋 List of Products and Services

This is a handle with a luxurious feel due to the melamine coating. It can be installed from either the outside or the inside. The installation surface will be flat.

• others

This is a rotating handle developed with the concept of reducing installation man-hours. The design of the handle has also been completely renewed, featuring a rectangular shape that matches various enclosures.

• others

This is a stainless steel rotating handle with a matte finish and a subtle texture.

• others

It is a handle that is large and easy to operate with a grip.

• others

This is a version of THA-6 with a grip attached.

• others

This handle is easy to grip and has a built-in spring, resulting in minimal play in the arm.

• others

It is a rectangular trunk handle. The one with a spring prevents the handle from swinging.

• others

This is a typical handle for a carry box.

• others

It is a round handle with an accent on the base.

• others

It is a simple arm-type handle.

• others

This is a handle that incorporates a spring into THA-131 to prevent the handle from wobbling.

• others

When not in use, the handle fits into the main body, making the surface flat.

• others

This is a handle that can be turned down when not in use, allowing for effective use of the space around the device. The handle is designed to be stable due to the detent mechanism, making it less likely to wobble.

• others

It is a handle with a soft leather touch.

• others

It has a lightweight and easy-to-grip design, making it suitable for storage cases for devices that require portability.

• others

A leaf spring is used in the handle part.

• others

A leaf spring is used in the handle part.

• others

This is a handle with a slim and smart design. Since the mounting screws and other components are not visible on the surface and there are no protrusions, it can be used with any equipment or device without any discomfort.

• others

1. Adopts a push-in method that simplifies installation. ★2. A three-point parts configuration focused on VE. ★3. Provides space for company names or logos (nested surface).

• others

A leaf spring is used in the handle part.

• others

A leaf spring is used in the handle part.

• others

A leaf spring is used in the handle section.

• others

A leaf spring is used in the handle section.

• others

A leaf spring is used in the handle part.

• others

It is a small stand handle.

• others

A wide variety of screw sizes, color variations, and designs from M5 to M16.

• others

There are two types made of brass: male thread type and female thread type.

• others

This is a simple stand foot that makes the device's operation surface easier to see with a one-touch feature. There are four standard sizes available according to the width of the casing.

• others

This is a support leg to make the operation panel of the machine easier to see. When not in use, the arm can be rotated and stored backward, and the arm has stop mechanisms at both the front and back. Additionally, it can also be used as a rubber foot with the TM-175 alone.

• others

It is a plastic foot that can be easily installed by simply pushing in the knock pin.

• others

It is a plastic foot that can be easily installed by simply pushing in the knock pin.

• others

It has a foot with a non-slip feature.

• others

It is a plastic foot that can be easily installed by simply pushing the anchor into the mounting hole.

• others

This is a foot for industrial equipment that can be easily installed with a single screw. We also handle UL standard 94V-0 products and CR (black) as custom orders.

• others

It is a leg for industrial equipment that can be easily installed with just one screw.

• others

This is a rubber foot made from UL certified materials.

• others

We have prepared many types to accommodate the specifications of the equipment.

• others

We have prepared many types to accommodate the specifications of the equipment. We also handle UL standard 94V-0 products and CR (black) as custom orders.

• others

This is a rubber foot that is strong against lateral loads and impacts due to its mounting hardware. We also handle UL standard 94V-0 products and CR (black color) as custom orders.

• others

It is a simple cushioning material that can be easily installed by simply pushing it into the mounting hole.

• others

It has a high coefficient of friction and excellent anti-slip effect. It is made of a durable elastomer that does not crack or harden. It has excellent wear resistance. It provides cushioning and vibration damping effects. It can be easily fixed by simply peeling off the backing paper.

• others

It has a high friction coefficient and excellent anti-slip effect. It is made of a durable elastic material that does not crack or harden. It has excellent wear resistance. It provides cushioning and vibration-damping effects. It can be easily fixed by simply peeling off the backing paper. Being colorless and transparent, it eliminates the hassle of color matching.

• others

● With a one-touch operation of the unlocking mechanism, extension and contraction can be easily achieved. ● The height (length) that is pulled out automatically locks in place, eliminating the need for troublesome screws or pins. ● It can be locked at any desired height (length), allowing for flexible adjustments. ● Depending on the customer's ideas, it can be used in various scenarios that require height (length) adjustments, such as legs, stands, and arms. *For different stroke lengths and locking directions, we can accommodate custom requests, so please consult with us.*

• others

It is compact and has the highest allowable load. Even when fixed under heavy loads for long periods, there is no residual deformation from the load. The swivel part has a packing structure that retains a large amount of grease, allowing for long-term storage, resulting in excellent waterproof, dustproof, and rustproof effects. The swivel components are surface-hardened (quenched), providing exceptional durability. The main shaft and upper plate (race) are securely fastened with a double crimp, making them very strong against twisting. The wheels are made of a special synthetic resin, primarily phenolic resin, developed in collaboration with Sumitomo Bakelite Co., Ltd. specifically for wheels, and through a special molding method, they exhibit outstanding wear resistance, impact resistance, and load-bearing capacity. All rotating parts of the wheels use roller bearings, which provide high durability against loads and ensure smooth wheel rotation.

• others

This is a caster for heavy loads.

• others