栃木屋 List of Products and Services

This is a stainless steel arm catch with a clamping force provided by a spring. By angling the lever, it achieves a compact and space-saving design, and the gripping part is shaped like a butterfly to ensure ease of operation.

• others

This is a stainless steel hinge (pivot) that reduces play between the hinge piece and the shaft. It suppresses the iron powder generated by friction between the hinge piece and the shaft, and also reduces door sagging. Being made of stainless steel, it can be used outdoors. *Please note that rust may occur depending on the installation environment and duration, and corrosion resistance is not guaranteed.

• others

This is a stop fitting for window frames (sashes) such as sliding doors. It has a click sensation both when locking and unlocking. It is an image of hardware for fixtures installed on windows and sliding sashes, but it can also be used as a holding function for doors or lids of enclosures, providing a tightening and sealing effect in addition to the original function of the crescent, allowing for secure fixation.

• others

When pushed in, a stopper engages in the slider section, maintaining the door in a closed state with magnetic force. If pushed in again, the stopper is released, and the door is kicked out by an internal spring. This repeated pushing action is suitable for areas with frequent opening and closing.

• others

This is an assembly of fittings and rods that can be used together with our product THA-276-2H (handle).

• others

This is a hinge that can be installed with M4 flat screws or 4mm flat rivets. *Note: When installing, please perform chamfering on the mounting surface. Both flat screws and flat rivets may protrude slightly from the surface, but this does not affect operation.

• others

The corner nut can move, so it can be used even if there is some misalignment during assembly. Additionally, since the corner nut is temporarily fixed by the holding power of the nut holder, it will not move due to gravity when used vertically.

• others

This is a foot for industrial equipment that can be easily installed with a single screw. It incorporates a hat-shaped washer, allowing for secure fastening with a higher tightening torque compared to standard rubber feet. We can also accommodate custom orders for various materials, including flame-retardant specifications and silicone rubber, as well as different colors.

• others

This is a shock-absorbing component that utilizes the viscosity of oil. It features a 2-way design that allows for smooth and quiet opening and closing, as well as reciprocating motion of lids and doors. It can be used in conjunction with our product, the Damper Guide (TM-216).

• others

This is a handle primarily designed for opening and closing doors and lids. By having the release button (push button) at the top of the product, it reduces contact with the hand caused by the handle popping up when releasing the latch, thereby enhancing operability. *Note: The latch is not included.

• others

This is a square handle that has been surface-treated with a pearlescent chrome finish. It is called "pearlescent" because it has a surface resembling that of a pear. Fingerprints and dirt are less noticeable after operating the handle. THA-157S-1 is the type with screw feet, while THA-157S-2 is the type without screw feet.

• others

We will be exhibiting at the "Mechanical Components Technology Exhibition (M-Tech)" held at Intex Osaka from October 2 (Wednesday) to October 4 (Friday), 2024. This year, under the theme "NEXT STAGE - Mechanisms and Components for the Future," we will showcase multiple components suitable for various environments, divided into sections for new products, semiconductor manufacturing equipment, railway-related, distribution-related, electric locks, and joint development. In addition to the above, our components can be used in various products such as communication devices, medical equipment, distribution boards, and construction machinery. If you have any concerns about selecting components, please feel free to consult us at the exhibition venue. We invite you to visit our booth (Hall 6, 50-44) and try out the actual components to experience their operation and usability.

• others

By staggering the mounting holes like bird footprints, interference between the screw heads can be avoided, allowing for a larger opening angle of doors and lids after installation.

• others

The outer member side can be used with only the square head round bolts (carriage bolts). It has a function that sequentially extends the rails during withdrawal, enhancing load-bearing capacity. 【Notes】 Used screws: Inner member: M5 or M6 truss or bind screws can be used.         (Depends on the mounting holes used.) Outer member: In addition to M5 or M6 square head round bolts (carriage bolts),          M5 or M6 truss or bind screws can also be used.         (Depends on the mounting holes used.) Each member cannot be disassembled.

• others

We will be exhibiting at the "Mechanical Components Technology Exhibition (M-Tech)" held at Tokyo Big Sight from June 19 (Wednesday) to June 21 (Friday), 2024. This year, under the theme "NEXT STAGE - Mechanisms and Components for the Future," we will showcase multiple components suitable for various environments, divided into sections for new products, semiconductor manufacturing equipment, railway-related, distribution-related, electric locks, and joint development. In addition to the above, our components can be used in various products such as communication devices, medical equipment, distribution boards, and construction machinery. If you have any questions about selecting components, please feel free to consult us at the exhibition venue. We invite you to visit our booth (East Hall 3 E17-6) and try out the actual components to experience their operation and usability.

• others

It exhibits a high anti-slip effect on P tiles and similar surfaces. Additionally, thanks to the magnet on the bottom, it can be attached to the side of the casing when not in use. (The bottom magnet is a unique specification of the TM-322-100 and is not available in other models of the TM-322.)

• others

By using the separately sold screw lock washers (TM-147-3/TM-147-3V) in conjunction, you can prevent the screws from falling out during installation. *Screw lock washers are not included.

• others

We have published the 2020 edition of the comprehensive catalog No. 71 from Tochigiya. It is a full-color comprehensive catalog of approximately 1200 pages that covers all Tochigiya products. It features a large volume of 5000 listed products, including about 500 new items. We encourage you to keep it on hand and make use of it. [Featured Products] ■ Latches, fasteners, and locks ■ Various types of hinges ■ Handles and grips ■ Surrounding parts and casters Many other products are also included. *This document is a digest version. If you would like the "comprehensive catalog" that covers all Tochigiya products, please request it through [Contact Us].

• others

This product is an electric lock for securing doors. It locks the door by pushing it in and unlocks it through electrical current. It can be installed regardless of the lock orientation and powerfully lifts the door even if it is small. It comes with an emergency unlocking feature, so it is reliable even during power outages.

• others

By using blue components, which are rarely used in food, it becomes easier to visually detect them in case of accidental contamination. Additionally, products that contain metal powder can be detected by metal detectors.

• others

This is a caster with a low installation height and a small turning radius.

• others

This is a caster with a low mounting height and a small turning radius.

• others

Excellent driving, outstanding stability, smooth turning, with cover.

• others

Since it has dual wheels, the turning radius is small and the design is excellent.

• others

Since it has dual wheels, the turning radius is small and the design is excellent.

• others

This is a compact and lightweight caster with excellent driving stability and maneuverability. Its original design matches well with various indoor equipment. Additionally, it features a new type of stopper that offers good operability.

• others

We have added a series with a high allowable load to the TY series. It is a lightweight caster that excels in driving stability and turning performance.

• others

This is a caster that can be easily disassembled into individual parts using standard tools, allowing for complete separation of the metal and resin components.

• others

The wheels have a double structure of inner and outer wheels, and the outer wheel section uses elastomer for the casters. It causes minimal scratches and dirt on the floor surface, and the running sound is extremely quiet. It features a new type of stopper that offers good operability. The double stopper is suitable for items with a lot of vibration, as it stops both the rotation of the wheels and the swivel.

• others

This caster has a stopper function built into the main body, allowing for easy pulling with wires, enabling free movement and stopping at your fingertips. Since the main body is made of resin (nylon), it significantly reduces noise during operation compared to metal. It uses elastomer wheels that do not damage the floor. It is suitable for healthcare and nursing care applications.

• others

The metal part is made of stainless steel, and the wheels have a double structure with an inner and outer wheel, using elastomer for the outer wheel. It causes minimal scratches and dirt on the floor, and the running sound is extremely quiet. The casters with double stoppers can stop both the turning and the rotation of the wheels, making them effective for products with a lot of vibration.

• others

The resin wheels make for very quiet operation, and the dual wheels allow for very smooth turning movements. Compared to conventional products, the wheel width has been made thinner. We also offer custom production for changes in wheel color and logo engraving.

• others

This is a dual-wheel caster designed to reduce the entrapment of debris with a cover on the wheel section. The resin wheels make it very quiet during operation, and the dual wheels allow for very smooth turning movements. We also offer custom production for changes in the color of the wheel section and logo engraving. Please feel free to consult with us.

• others

This is a caster stopper that allows you to lock and unlock simply by pressing the pedal.

• others

It is a stopper for casters that allows you to lock and unlock simply by pressing the pedal.

• others

It is a screw-in type, making it ideal for equipment that requires beauty and lightness.

• others

It is a screw-in type, making it ideal for equipment that requires beauty and lightness.

• others

It is ideal for transporting items with a larger volume than weight.

• others

It is ideal for transporting items with a larger volume than weight.

• others

Depending on the application, you can choose the material and diameter of the wheels, making them versatile for various uses.

• others

It is ideal for transporting items with a larger volume than weight.

• others

Depending on the application, you can choose the material and diameter of the wheels, making them versatile for various uses.

• others

Made of stainless steel, it has excellent corrosion resistance. We offer a wide variety of wheel types. Please choose according to your needs.

• others

Made of stainless steel, it has excellent corrosion resistance. We offer a wide variety of wheel types. Please choose according to your needs.

• others

Made of stainless steel, it has excellent corrosion resistance. We offer a wide variety of wheel types. Please choose according to your needs.

• others