広和 List of Products and Services

- The grease exchange is simply done by replacing the 400g cartridge. - It is battery-operated, so no electrical wiring is required, making installation easy. - With a maximum discharge pressure of 2.94 MPa, reliable lubrication is possible. - The lubrication interval can be set using the built-in timer. - The operating time can be set between 1 to 7 seconds, allowing for adjustment of the lubrication amount. - Since it is motor-driven by batteries, the discharge pressure remains constant until the end. - By using the separately sold distribution valve KU-4N-2, you can have two outlets.

• Crane and others

By centralizing manual lubrication to multiple locations with a single pump, the time-consuming lubrication process can be significantly shortened. We have all the necessary components for centralized lubrication, and we offer models for 4 outlets and 6 outlets. The grease pump is a manual type that can use 400g cartridges. Assembly and installation can be easily done by anyone.

• Transport machinery

We would like to introduce a case study of the "Grease Checker" handled by Hirokazu Co., Ltd. In a dual-line system, even if there is damage to the piping between the distribution valve and the bearings, the distribution valve will operate normally, making it difficult to detect abnormalities. By installing the Grease Checker close to the bearings, the grease supply status to the bearings can be easily confirmed at a glance. 【Case Overview】 ■ Product Introduced: Grease Checker ■ After Installation - The Grease Checker was installed close to the bearings, and the grease pump was operated. - The indicator pops out for normal areas, while it remains down for abnormal areas, making it easy to identify problem spots. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce a case study of the "Wired Monitoring System" handled by Hirokazu Co., Ltd. Inspecting multiple distribution valves scattered at high locations of large transport equipment such as unloaders and stacker reclaimers is dangerous and labor-intensive. Most distribution valves are installed at the top of the equipment, making it impossible to check the indicator rods due to rust and dirt. Therefore, all distribution valves were replaced with limit switch-equipped distribution valves, and the wiring of the limit switches was consolidated into a monitoring box to display the number of times the indicator rods operate. The counter is battery-operated, eliminating the need to draw new power. 【Case Overview】 ■ Introduced Product: Wired Monitoring System ■ Benefits - Early detection of malfunctioning areas through efficient lubrication monitoring - Prevention of accidents before they occur - Leads to labor savings *For more details, please refer to the PDF document or feel free to contact us.

• others

The centralized lubrication system "Single Line System / Dual Line System" is a device that supplies lubricants in a timely and appropriate amount to ensure the stable operation of machinery and equipment. Proper lubrication management of machinery not only contributes to stable operation but also extends lifespan, reduces energy consumption, minimizes hazardous work and environmental impact, and streamlines maintenance tasks. As a specialized manufacturer of lubrication devices, our company possesses the know-how and products to propose suitable lubrication systems for various customers' machinery. 【Features】 <Single Line System> ■ Quickly detects oil supply abnormalities ■ Suitable for small to medium-sized applications ■ All oil supply lines are composed of a single pipe ■ By selecting the distribution valve piston, the supply amount of lubricant can be set for each lubrication point ■ Classified into six types based on drive method, scale of machinery, and lubricated mechanical elements, etc. *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce the centralized lubrication systems and forced circulation lubrication systems that we handle. We offer a single line system, where the oil supply line (from pump to distribution valve to bearing) is composed of a single pipe, as well as a dual line system, which consists of two pipes from the pump to the distribution valve. When considering the introduction or update of lubrication systems, please feel free to contact us. [Featured Products] ■ Single Line System ■ Dual Line System ■ Electric Lubrication Pump ■ Lubrication Monitoring Items ■ Filling Pump (KGP Series) *For more details, please refer to the PDF materials or feel free to contact us.

• others

This document is an introductory guide to the "Dual Line Distribution Valve Wireless Monitoring System." The "Dual Line System" is one of the representative systems among lubrication methods, and by using it in conjunction with bearing monitoring items, it enables further system upgrades for centralized lubrication. We provide a detailed explanation of "lubrication management for equipment," as well as the "mechanism" and "product specifications," using photos and diagrams. We encourage you to read it. [Contents] ■ Lubrication management for equipment ■ The necessity of condition monitoring for the Dual Line System ■ The mechanism of the wireless monitoring system ■ Monitoring screen ■ Product specifications ■ Before considering implementation... Checking communication status *For more details, please refer to the PDF document or feel free to contact us.

• others

A centralized lubrication system is a device that supplies lubricants in a timely and appropriate amount based on lubrication technology (tribology) to ensure the stable operation of machinery and equipment. 【Benefits of Implementation】 ■ Reduction of equipment downtime (improvement of productivity) ■ Optimization of oil supply amount (savings on lubricant costs) ■ Labor saving ■ Energy savings through smoother operation of equipment ■ Extension of equipment and bearing lifespan ■ Prevention of missed lubrication points ■ Prevention of hazardous work ■ Prevention of foreign matter contamination in lubricants ■ Improvement of product quality and savings on consumables 【Contents】 ■ Introduction ■ Benefits of Implementation ■ Steps for Improving Lubrication Work Methods ■ Components ■ Mechanism and Features of the System *For more details, please refer to the PDF document or feel free to contact us.

• others

This document is an introductory guide to Kowa's "Oil Air." "Oil Air lubrication" is a system that utilizes a continuous flow of compressed air to supply a small amount of lubricating oil continuously. It provides detailed explanations of topics such as "Characteristics of Oil Air Lubrication," "Lubrication Methods of Oil Air," and "Equipment where Oil Air is Active," using photos and diagrams. Please take a moment to read it. [Contents] ■ About Oil Air Lubrication ■ Characteristics of Oil Air Lubrication ■ Comparison with Oil Mist Lubrication ■ Lubrication Methods of Oil Air *For more details, please refer to the PDF document or feel free to contact us.

• others

★★ KOWA Cyclone Clean System 2-Piece Mattress Cleaning and Drying Device ★★ ★★★ Cyclone Clean System CCS-D02 Model ★★★ Disinfection alone cannot remove dirt and odors! A new idea of "washing mattresses thoroughly"! ◆ Unique Cleaning Method ◆ Using the impact force of water and centrifugal force, we achieve deep cleaning throughout the mattress. Cleaning water and rinse water are evenly sprayed across the entire mattress, efficiently cleaning not only the center, which is prone to odors, but also the interior of the mattress. Since we effectively utilize the power of water, there is no need for gas or other heat sources, resulting in low costs. ◆ Easy Setup ◆ The height of the mattress insertion opening is designed for easy lifting, allowing you to set it up without having to stand the heavy mattress up. Fixing it is also simple with a one-touch mechanism, making it easy for anyone to operate. ★ Unique Deodorization System ◆ Approaching odors with a double action of deodorizing detergent and deodorizer! This reduces the hassle of pre-treatment and lessens the burden on the operator. It also contributes to improved finishing quality and reduced waste! ◆ High Drying Efficiency ◆ Our unique drying system effectively dries by applying warm air while dewatering! ☆

• Nursing care products

We will introduce a case where the labor-intensive process of greasing roll chocks has been easily automated using an "Automatic Grease Filling System." The task of filling grease into roll chocks with a grease gun nozzle is time-consuming for maintenance personnel, and since the grease is filled based on human judgment, the actual amount of grease used varies each time, making it difficult to manage. This system uses our high-capacity drum-connected electric grease pump to fill the necessary grease into the roll chocks via a distribution valve. Customers calculate the required amount of grease for the chocks, and based on that calculation, we select the piston size for the distribution valve. The system then controls the operation count of the distribution valve to ensure that the necessary amount of grease is supplied to each location. [Challenges] ■ The task of filling grease into roll chocks with a grease gun nozzle consumes a lot of time for workers. ■ Since the grease is filled based on human judgment, the actual amount of grease used varies each time and is difficult to manage. *For more details, please refer to the PDF document or feel free to contact us.

• others

This document is an introductory guide to the flow control meter "High Precision Oil Flow KOF Series." This product is well-suited for equipment and facilities in the paper and pulp industry, allowing for precise oil flow settings according to the size of roll bearings, starting with the dryer part of the paper machine. We provide detailed explanations of examples of implementation, structure and principles, and maintenance, using photos and diagrams. We encourage you to read it. [Contents] ■ Product Overview ■ Implementation Examples ■ Structure and Principles ■ Maintenance *For more details, please refer to the PDF document or feel free to contact us.

• Measurement and Analysis Equipment

★★★ KOWA Cyclone Clean System 4-Sheet Mattress Cleaning Device ★★★ ★★★ Cyclone Clean System Model CCS-04 ★★★ Disinfection alone cannot remove dirt and odors! A new concept of "washing mattresses thoroughly"! ◆ Unique Cleaning Method ◆ Using the impact force of water collisions and centrifugal force, we achieve deep cleaning that penetrates into the details of the mattress. Cleaning water and rinse water are evenly sprayed over the entire mattress, efficiently cleaning not only the center, which is prone to odors, but also the interior of the mattress. Since we effectively utilize the power of water, there is no need for gas or other heat sources, making it low-cost. ◆ Easy Setup ◆ The height of the mattress insertion opening is designed to be about 65 cm, allowing for easy setup without having to lift or stand heavy mattresses high. Fixing it is also simple, so anyone can perform the task. ★ Unique Deodorization System ◆ Approaching odors with a double action of deodorizing detergent and deodorant! Reducing the hassle of pre-treatment, it lessens the burden on the operator. It also leads to improved finishing quality and reduced waste!

• Nursing care products

- Spray Valve [KP-0・KP-2] Allows for the application of lubricants to tire rollers used in various open gears and swivel parts. - Y-Shaped Strainer [YST3/8・YST/1/2] A Y-shaped strainer for lubrication piping with a working pressure of 20.6 MPa. You can choose the thread diameter and mesh size. - High-Pressure Ball Valve [HT0210 Series] Available in four different thread diameters. With a working pressure of 20.6 MPa, it can be used in main pipes such as pump outlets. - Two-Way Check Valve for Grease [TWCV3/8] Please use it in areas with significant height differences during piping.

• Transport machinery

The manufacturing of oil supply devices and various units requires not only know-how related to canning, piping assembly, and pickling but also extensive knowledge about the component devices of the units, such as oil pumps, oil coolers, oil filters, instrumentation related to temperature, pressure, differential pressure, and oil level management, as well as valve-related components like pressure control valves and temperature control valves. Additionally, various know-how is necessary throughout the design, manufacturing, and inspection processes. Our company has already produced over 10,000 oil supply devices and hydraulic power units, among other unit products, accumulating a wealth of know-how and experience. In particular, we have numerous achievements in forced circulation oil supply devices (LO) as lubrication units for major equipment in various industries, focusing on chemical plants, steelmaking, papermaking, and power generation. We have also applied this know-how to the production of units using fluids such as water and gas, as well as units for applications other than lubrication. We have a proven track record of complying with various international standards. If you provide us with the necessary conditions for the manufacturing of oil supply devices and various units, we will respond after consultation. We also offer a series of forced circulation oil supply devices, so please refer to our dedicated catalog.

• Thermal power generation

We would like to introduce four types of items as "Lubrication Monitoring Items." 1. Distribution Valve Monitoring System: This system allows for centralized management of the operational status of widely distributed distribution valves. The monitoring box is battery-operated and can be customized according to the number of distribution valves. 2. Counter-equipped Distribution Valve: By visually checking the counter values attached to the distribution valve, you can easily check for abnormalities in the piping line and bearings after the distribution valve. The counter is mechanical, so no power supply is required. 3. Grease Checker: By installing it close to the bearing, you can visually check for troubles between the distribution valve and the bearing. Installation is easy, and it ensures the reliability of inspection work. 4. Grease Flow: By installing it close to the bearing, you can centrally manage troubles between the distribution valve and the bearing using the monitoring box. *Please note that there are conditions and constraints for installation depending on the lubrication system for each product. For more details, please refer to the catalog or feel free to contact us. ★ We will be exhibiting at "Maintenance & Resilience TOKYO." For details, please see the basic information.

• Tunnel construction

This catalog introduces the forced circulation lubrication system "K Series," designed for large, ultra-high-speed rotating machinery that operates under heavy loads, using oil as a lubricant. It features a wide range of products, including "K1," which has a base unit configuration without an oil tank, as well as "K2" and "K3," which effectively supply oil to machinery with low heat generation. Please use this for selecting products. [Featured Products (Excerpt)] ■K1 ■K2 ■K3 ■K4A *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• others

This catalog introduces the "Dual Line Centralized Lubrication System," which uses grease as a lubricant and operates the distribution valve through two pipes in a parallel operation system. It includes a wealth of information about products such as centralized lubrication systems, oil supply pumps, and switching valves. Specifications and features are also provided, so please use this information for product selection. [Contents (excerpt)] ■ Centralized Lubrication System ■ Oil Supply Pump ■ Switching Valve ■ Distribution Valve ■ Grease Filling Pump *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• others

This catalog introduces the "Single Line Central Lubrication System," a progressive action system that primarily uses grease as a lubricant and supplies lubricant to the distribution valve through a single pipe. It includes a wealth of information about the system configuration, equipment configuration, drive methods, lubrication methods, and more. Please use this information for product selection. [Contents (excerpt)] ■ System configuration ■ Equipment configuration ■ Lubrication method ■ Lubrication pump ■ Distribution valve *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• others

The "Oil/Air Central Lubrication System" is a system that uses compressed air flow as a lubricant, capable of continuously supplying a small amount of oil. Due to the supply air pressure, the internal bearing pressure is higher than the external pressure, preventing the intrusion of dirt and water. In the case of a dual line system, unnecessary lubrication points can be easily terminated by simply plugging the oil/air outlet of the mixing valve. Additionally, since lubrication oil is supplied by compressed air, there are no restrictions on the installation direction of the piping. 【Features】 ■ Low oil consumption (supplies only the minimum necessary oil) ■ Continuous supply of oil to lubrication points ■ Provides a sealing effect for bearings ■ The amount of oil supplied to individual lubrication points can be easily adjusted on-site (in the case of dual line systems) *For more details, please refer to the PDF materials or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• others

We offer a wide range of products tailored to various applications and the scale of centralized lubrication, including options for dual-line and single-line systems, manual lifters, suspended types, and a variety of discharge volumes. 【Features】 ● Options available for dual-line and single-line systems. ● Discharge volume can be selected from 11 different types. ● Drum replacement can be done using either a manual lifter or a suspended type. ● Motor-driven for precise discharge. ● Equipped with a plunger pump that is resistant to air and foreign object entrapment. ● Includes a spreading blade to reduce grease residue. ● Drums can be easily replaced as there is no follower plate.

• Drilling Machine

【Features】 ● Made of aluminum die-cast, it is lightweight. ● Maximum operating pressure is 14.7 MPa. ● Comes with a dipstick for easy oil level checking. ● Available in four outlet configurations: 4, 6, 8, and 12 outlets. It can also accommodate odd numbers of outlets when using dedicated auxiliary fittings.

• Transport machinery

【Features】 ● Parallel installation type with two piping connections. ● Distributes lubricant sent from the pump in a fixed amount to each bearing. ● Flow rate can be adjusted for each outlet within a certain range using adjustment screws. ● Easily expandable or reducible according to the increase or decrease of lubrication points. ■ KS Type (Single Outlet Type) Discharges grease from one location on both sides of the main piston. ■ KW Type (Double Outlet Type) Discharges grease from separate outlets on both sides of the main piston. Please use in combination with a dual-line lubrication pump. Limit switches for confirming the operation of the distribution valve, counters, and dustproof distribution valve covers are also available.

• Transport machinery

When replenishing grease in the grease pump tank, always use a dedicated filling pump for grease. If you refill grease from the top of the tank, it can cause air entrapment and contamination with foreign substances, leading to potential problems. The filling pump can be easily attached and detached from the grease pump's filling port using a quick coupling. *Generally, this is limited to our products, but we also accept adapters for pumps from other manufacturers. For drum cans, we use a stirring blade method without a follower plate. This allows for minimal residual grease and makes it easy to replace the drum can.

• Transport machinery

【Features】 ● Compact and lightweight. ● Maximum discharge pressure up to 14.7 MPa (for grease). ● Tank shapes available in refillable and 400g cartridge types. ● Usable for single-line applications for grease and oil. Please use the dedicated filling pump KGP-420 for filling grease.

• Transport machinery

【Features】 ● High-pressure discharge Maximum operating pressure supports up to 20.6 MPa (when using grease). ● Choice of tank shape You can choose from refillable tanks (2L acrylic tank, 3L and 6L steel tanks) suitable for 400g cartridges, depending on your application. *When using a refillable tank, please use the dedicated filling pump KSP-420. ● Available for single line and dual line applications ● Available for grease and oil

• Transport machinery

The KSP-33 model small electric grease pump is a compact and highly functional grease pump designed for single-line use. When used in conjunction with a distribution valve, it allows for greasing at multiple locations. 【Features】 ● High-pressure discharge It can handle a maximum operating pressure of up to 20.6 MPa (when using grease). ● Equipped with two discharge outlets One pump can supply grease to two systems. It is also possible to combine them into a single outlet. ● Selection of discharge volume The discharge volume can be chosen from three different options. ● Selection of tank shape Various lineups are available, including refillable tanks (2L acrylic tank, 6L steel tank) for 400g cartridges, with or without level switches. *When using a refillable tank, please use the dedicated filling pump KGP-420. Additionally, we can accommodate custom requests, so please feel free to consult with us.

• Transport machinery

The "Grease Checker KGC-01" is a product that, when installed on bearings or nearby piping, allows for easy identification of lubrication status. If lubrication is adequate, the indicator pops out, making it easy to see at a glance. Anyone can easily check the lubrication, which improves work efficiency. It helps avoid problems caused by insufficient lubrication, such as bearing seizure. In emergencies, it is possible to temporarily grease through the grease nipple. Additionally, for sites with many lubrication points or where access to distribution valves is difficult, we also offer the "Lubrication Monitoring System," which allows for centralized monitoring of distribution valve operation via an LCD counter. *For more details, please refer to the PDF document or feel free to contact us.

• others

The "Underwater Bottom Cleaning Robot" can clean without contaminating the water. The main camera can provide a wide field of view with vertical movement and horizontal rotation. The sub-camera allows for cleaning verification, while the main camera can be used for inspection. Additionally, the dimmable LED lighting ensures high transparency underwater, securing a wide field of view. The underwater cable is highly durable and buoyant, enabling extensive cleaning. 【Features】 ■ Can clean without contaminating the water ■ Improved operability with twin cameras ■ Equipped with a camera that has up to 40x zoom ■ Pressure-resistant waterproof performance at depths of 40m ■ Capable of cleaning steep inclines *For more details, please refer to the PDF document or feel free to contact us.

• others

This product is an underwater camera system that can move freely. It features remote control with endless horizontal 360° and vertical 90°. Equipped with a high-intensity lamp. With the zoom function, distant targets can be clearly seen. 【Features】 ■ Hanging type with pan-tilt-zoom ■ Camera moves freely ■ Equipped with a high-intensity lamp ■ Includes zoom function *For more details, please refer to the PDF document or feel free to contact us.

• Security cameras and surveillance systems
• others

The "150mROV" is an underwater high-definition camera robot that demonstrates its power in long-distance exploration under tidal currents. It is equipped with a high-resolution 2.38 million pixel camera. The zoom lens features an optical 10x and digital 12x ultra-wide-angle lens. The camera can capture a wide range of 180° left and right, and 180° up and down through remote control operation. 【Features】 ■ Equipped with a high-definition 2.38 million pixel high-resolution camera ■ Lens features optical 10x and digital 12x zoom capabilities ■ Remote control operation ■ Includes depth and heading hold functions as an autopilot feature ■ Stable vehicle configuration and joystick controller for easy operation *For more details, please refer to the PDF document or feel free to contact us.

• Security cameras and surveillance systems
• others

The "MARINE EYE-mini" is a compact underwater camera system that allows for easy observation in narrow and tight spaces. With a special manufacturing method, it is resistant to continuous micro-vibrations and shocks, and is maintenance-free. The ultra-wide-angle lens ensures a broad field of view, and it can be mounted in various locations using support brackets. 【Features】 ■ Easy observation in narrow and tight spaces with a diameter of 25mm and a length of 45.5mm ■ Maintenance-free ■ Waterproof structure with no concerns about water ingress ■ High-resolution low-light camera that brightly captures dark underwater environments ■ High versatility suitable for both saltwater and freshwater *For more details, please refer to the PDF document or feel free to contact us.

• Security cameras and surveillance systems
• others

The "LED-MARINE EYE" is a compact underwater camera system equipped with a high-brightness LED light. It is resistant to continuous micro-vibrations and shocks due to its special manufacturing process, making it maintenance-free. With an ultra-wide-angle lens, it ensures a broad field of view and can be installed in various locations using support brackets. It has high versatility for both saltwater and freshwater environments and allows for easy observation in narrow spaces. 【Features】 ■ Equipped with high-brightness LED light ■ Maintenance-free ■ Waterproof structure with no worries about water ingress ■ High-resolution low-light camera that brightly captures dark underwater scenes ■ Easy observation in narrow spaces *For more details, please refer to the PDF materials or feel free to contact us.

• Security cameras and surveillance systems
• others

The "HD-SK4S-100" is a high-definition compact pan-tilt suspended underwater camera capable of high-quality shooting with 360° horizontal and 90° vertical freedom. It is waterproof up to a depth of 100 meters. Additionally, it is equipped with LED lights that are linked to the camera's up and down movements, allowing for clear shooting even in dark or dim environments. It can be used for a wide range of applications, from observing fish in fixed nets and aquaculture tanks, checking for fish diseases, monitoring fry, and leftover feed, to equipment inspections. 【Features】 ■ Camera movement: 360° full rotation horizontally (endless), 90° vertically ■ Waterproof up to 100m ■ Equipped with LED lights linked to the camera's up and down movements ■ Extremely compact body and controller for easy handling ■ High-quality high-definition specifications *For more details, please refer to the PDF document or feel free to contact us.

• Security cameras and surveillance systems
• others

The "HD-MARINE EYE" is a compact high-definition underwater camera capable of capturing clear images even in low-light environments. It can be used for observing fish in fixed nets and aquaculture cages, checking feeding behavior, and monitoring net conditions. 【Features】 ■ High definition ■ Waterproof up to 50m ■ Compact and lightweight with an outer diameter of φ51mm ■ High sensitivity for clear imaging in dark environments *For more details, please refer to the PDF document or feel free to contact us.

• Security cameras and surveillance systems
• others

The "MODEL 881A" is a super compact variable frequency profiling sonar. It is capable of precisely measuring the cross-sectional shape of any space. The measurement distance can be set arbitrarily within the range of 1m to 100m, and the exploration range can be adjusted from a maximum of 360° to 0° (in increments of 0.3°). Control is done via a laptop, taking up little space, and data recording and editing on the hard disk is easy. 【Features】 ■ Super compact and lightweight ■ Fine frequency settings available (600kHz to 1.1MHz in increments of 5kHz) ■ Easy operation with Windows-compatible software ■ Underwater measurement, scour investigation, river pier, and breakwater scour *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The "MODEL 881A" is a super compact variable frequency imaging sonar. By changing the ultrasonic frequency according to the underwater target situation, it displays precise images. Additionally, it allows for measurement of the size of objects using a cursor between two points, enabling confirmation of targets and searches. Control is done via a notebook PC, making it space-efficient, and long-term recording and editing are also easy. 【Features】 ■ Super compact and lightweight ■ Frequency can be finely adjusted (280kHz to 1.1MHz in 5kHz increments) ■ Easy operation with Windows-compatible software ■ Confirmation of targets and searches is possible ■ Long-term recording and editing are also easy *For more details, please refer to the PDF document or feel free to contact us.

• others

The KSP850 is an electric grease pump designed for direct connection to a drum and compatible with high-viscosity grease. In addition to its compact design, it features a self-weight descending follower plate. The pump lowers according to the remaining grease, increasing the vacuum level inside the drum and accommodating high-viscosity grease. 【Features】 ■ Compatible with NLGI No.0 to No.3 grease ■ Compact design ■ Drum replacement is done via an elevator system using rack and pinion ■ Utilizes a self-weight descending follower plate ■ Equipped with a mixing blade designed for high-viscosity grease *For more details, please refer to the PDF document or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• pump
• others

The "KSP820 Series" is an electric grease pump that enhances safety and convenience. It is a pump directly connected to a pail, which significantly reduces the contamination of grease with foreign substances. The stirring blades ensure that grease is consumed without waste. Additionally, there is no cumbersome follower plate during pail replacement, making it easy to change pails. 【Features】 - Adoption of a double plunger pump greatly reduces troubles caused by foreign substances and air. - Direct connection to the pail eliminates the hassle of refilling from a filling pump. - A manual lifter that raises and lowers the pump improves safety and convenience. - The discharge volume can be selected from seven models according to application. - Vertical and horizontal motor placements are available, allowing selection based on installation space. - Compatible with various lubrication systems (single line, dual line). - Patent and utility model registered. *For more details, please refer to the PDF materials or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• pump
• others

The "KS-C・KW-C Series" is a distribution valve for dual lines with a counter. It notifies you of the lubrication status through counting, making inspection work easy. Its mechanical structure offers excellent durability and can be installed in any orientation. 【Features】 ■ Alerts you to blockages in the piping ■ No risk due to mechanical structure ■ Allows you to identify areas of poor lubrication due to counting anomalies ■ Space-saving type that does not require much installation space ■ Utility model registered ■ Design registered *For more details, please refer to the PDF materials or feel free to contact us.

• Prime movers, torque converters, hydraulic equipment, generators
• others

The "Junpet KJP Type" is a battery-operated single-point grease dispenser that requires no piping or wiring, and minimizes grease waste through IC control, allowing for precise lubrication. With a maximum discharge pressure of 2.94 MPa, it ensures reliable oil supply. The built-in timer allows for setting the lubrication interval, and the operating time can be selected between 1 to 7 seconds, enabling the adjustment of the grease amount. It is a cartridge type that is convenient for grease replenishment and prevents contamination from foreign materials such as debris. A version compatible with 400g grease cartridges can also be produced. 【Features】 ■ High-pressure type 3MPa / Dust and drip-proof type ■ Lubrication interval can be set with the built-in timer (1, 2, 4, 8 hours) ■ Operating time can be set between 1 to 7 seconds ■ Microcomputer control allows for the appropriate amount of grease to be dispensed at regular intervals ■ Minimal variation in grease amount during initial and later stages of installation ■ If direct installation is not possible, it can be installed using piping (approximately φ8, 2m) *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "KSP-821GH Series" is an electric grease gun for pails that allows for grease dispensing anywhere, as long as there is power, without the need for air. Thanks to the electric plunger pump, it enables precise dispensing at any time. The mixing blades evenly reduce the grease, which is effective in minimizing leftover amounts. There is no follower plate, making it easy to change pails. 【Features】 ■ Electric drive type (compatible with AC100V/200V) ■ Utilizes an electric plunger pump ■ Mechanism that sucks in while mixing, reducing grease residue ■ Two inspection windows to check grease levels *For more details, please refer to the PDF document or feel free to contact us.

• Rock drills, demolition machines, and excavators

The "KBP Series" is a handheld, electric cordless grease gun that allows for lubrication in any location. You can choose between a one-touch cartridge type for easy grease replacement and a refillable type. 【Features】 ■ Equipped with a lithium-ion battery for repeated use ■ Battery level can be checked with a lamp ■ Convenient handheld design allows for work in any location ■ Easy to use for greasing ■ Available in two types: cartridge replacement and refillable ■ High-pressure discharge type also available ■ Total weight: 2.3 kg *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

Originally, the underwater camera TV robot "ROV150m specification" was designed to operate in dangerous deep-sea environments and water channels or tanks, allowing for the investigation and observation of fish reefs and other underwater features. Recently, due to a shortage of personnel, there has been an increasing number of cases where it is used for underwater inspections on factory production lines. Weighing only 47 kg, it can be easily handled by a small number of people. Its powerful propulsion system, with two horizontal and two vertical thrusters, excels in strong currents, deep depths, and long-distance exploration. Depth and orientation are digitally displayed on the monitor, and it can also be equipped with a high-definition camera (HDTV). 【Features】 ○ Equipped with a high-resolution camera with 410,000 pixels and a horizontal resolution of 470 TV lines ○ The zoom lens offers an optical 10x and digital 4x ultra-wide angle ○ Includes a "depth holding function" that automatically maintains depth ○ Features a 3-degree-of-freedom manipulator (up/down, rotation, gripper opening/closing) For more details, please contact us or download the catalog.

• Coastal construction
• Harbor Construction