新光工業 List of Products and Services

With a combination of various types of single pipe joints,

• Solar mounting brackets and fittings (solar fittings and protective sheets)

Three Features of the Reusable Single Pipe Pile "Shinko no Kui" ■ Sturdy Driving Section with Tapered Structure By adopting a tapered structure, the strength of the single pipe pile is enhanced, resulting in a pile that does not deform or settle due to impact. ■ Use of 20mm Machined Material and Full Circumference Welding for the Driving Section The driving section uses 20mm thick machined material and is fully welded, making it a highly durable single pipe pile. The top has a flat surface designed for easy hammer contact, allowing for secure driving. ■ Use of Conical Machined Material and Full Circumference Welding for the Tip The tip uses a pointed conical machined material, enabling the single pipe pile to be driven into hard ground. Additionally, - It can be easily installed by simply tightening the eye bolt and securing it with a nut. - Two types are available: S type with a single side ring and W type with double side rings. - Our single pipe pile "Shinko no Kui" is a dedicated product for the single pipe pile "Scat 91." - It is compatible with commercially available plastic chains, tar ropes, and steel chains. *For more details, please download the PDF or feel free to contact us.

• Other civil engineering works
• Temporary Construction Materials
• Scaffolding and Support Materials

A convenient single pipe pile that can be easily extended to various lengths according to the ground and site conditions! The "Skat 91" comes in three lengths: 1.0m, 1.5m, and 2.0m. By connecting these three types with various lengths of single pipe using our "Tsunagood," you can create single pipe piles of various lengths on-site, accommodating different ground conditions and site environments. Additionally, whether using machine driving or hammer driving, you can drive the single pipe without deforming it by using our "Tataka (large, medium, small)." In any scaffolding environment, you can always keep both feet on the ground and safely drive long single pipe piles by yourself, enhancing safety and work efficiency while achieving cost reduction. 【Product Features】 ■ Eliminates the striking part, achieving lower costs for single pipe piles. ■ Using "Tsunagood," you can reliably reach the support layer. ■ By attaching rope fittings to the single pipe piles, various uses are possible. ■ Extend! Connect! Pull! Stand up! The convenience of single pipe piles is greatly enhanced. *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials
• Civil Engineering Company
• Construction company

By enlarging the striking area, it is designed to make it easier to hit with a hammer. The supporting side below can work with peace of mind. You can confidently and powerfully drive the Skat 91 or single pipes with a hammer! 【Features】 ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The target is large, making it easier for the hammer to hit ■ Fewer mis-hits with the hammer, providing reassurance for the person supporting ■ The heads (striking parts) of single pipe piles [Skat 91] and single pipe do not deform ■ Single pipes can also be driven directly ■ No rebound during striking ■ Treated with hardening processing for long-term use *For more details, please download the PDF or feel free to contact us.

• Steel structure construction
• Foundation construction
• Pile and foundation work

The "Tataka - Medium" has undergone heat treatment on the striking part to prevent deformation, and its tapered structure transmits strong impact force to the single pipe, preventing deformation of the single pipe through the insertion part that fits the inner diameter of the pipe. When driven with a hydraulic breaker, it can drive in 150 to 250 pieces! ~ Features of the single pipe driving tool "Tataka - Medium" ~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The head of the single pipe pile [Scat 91] and the striking part of the single pipe do not deform. ■ It prevents deformation of the head (striking part) due to the powerful driving of the hydraulic breaker. ■ There is no rebound during striking. ■ It is heat-treated, allowing for long-term use. ■ It is also used for driving [Scat SP] and [Scat SF]. * For more details, please download the PDF or feel free to contact us.

• Earthworks
• Pile and foundation work
• Other woodworking

The "Tataka - Small" has a tapered structure that allows the impact force to be easily transmitted to the single pipe. It is mainly used for the installation of our Skat SP removable car stops. As a result of our testing on impact durability, it was found that it can withstand over 1,000 strikes without issue. ~ Features of the single pipe driving tool "Tataka - Small" ~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ The head (impact area) of the single pipe and single pipe stake (Skat 91) does not deform. ■ It does not bite into the single pipe. ■ Repeated use is possible. ■ It is also used for driving the Skat SP and Skat SF. *For more details, please download the PDF or feel free to contact us.

• Road facilities

The "rope fittings" for single pipe posts come in two types: the S type with a ring on one side and the W type with rings on both sides. Installation is simple; just insert it into the single pipe post, tighten the eye bolt, and secure it with a nut. This allows for easy tensioning of various ropes and chains, enabling a wide range of regulations and expanding the utility of single pipe posts. ~Features of the easy-to-install "rope fittings" for single pipe posts~ ■ Easy to install by simply tightening the eye bolt and securing it with a nut. ■ Available in two types: S type with a ring on one side and W type with rings on both sides. ■ Specifically designed for our single pipe posts "Shinko no Kui" and "Scat 91." ■ Compatible with commercially available plastic chains, tar ropes, and steel chains. *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials
• Safety and consumables
• Safety Supplies

The single pipe joint was born from the urgent desire of construction sites to drive long stakes safely and easily. It can securely connect with the single pipe stake "Scat 91," allowing for deep driving! It connects firmly enough that it can be extracted as a single stake even after being pulled out. With "Tsunagood," you can extend the length of the stake while maintaining strength, adapting it to the ground conditions and site situation. Since it is a completely internal joint type, you won't have to worry about protrusions that interfere with driving. ~ Features of the connection fitting "Tsunagood" ~ ■ Outer diameter φ48.6, thickness 2.4 mm specification ■ The length of the stake "Scat 91" can be extended according to ground conditions. ■ You can safely drive stakes alone with both feet always on the ground, regardless of the construction situation. ■ No need for a standing horse or ladder, no matter how long the stake is. ■ It can be reused. *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials

The "Massgood Straight Type" connects single pipes firmly and straight with fewer components. Even when bolts are tightened, the single pipes do not deform, and there is no loosening, play, or sagging at the connection points. ~Features of the Connection Fitting [Massgood Straight Type]~ ■ There are two types available: for single pipes with an outer diameter of 48.6mm and a thickness of 2.4mm, and for those with an outer diameter of 48.6mm and a thickness of 1.8mm. ■ There is no loosening, play, or sagging at the connection points. ■ Connects more quickly and firmly straight with fewer components, allowing one person to do it. ■ High-tension bolts are used. ■ The single pipes do not deform even when bolts are tightened. *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials
• Civil Engineering Company
• Construction company

The "Massgood Adjustable Type" is a single pipe joint that vertically erects single pipes, such as the diagonally driven single pipe pile [Scat 91] and extension single pipes. High-tension bolts are used, and the single pipe does not deform even when the bolts are tightened. ~Features of the Single Pipe Joint [Massgood Adjustable Type]~ ■ Outer diameter Φ48.6, thickness 2.4mm specification ■ Even unskilled workers can vertically erect single pipes by themselves. ■ Effective in narrow spaces where there is no room to drive a disposal pile. *For more details, please download the PDF or feel free to contact us.

• Temporary Construction Materials
• Civil Engineering Company
• Construction company

When pulling out the driven 【Scat 91】 or single pipe, a pry bar and clamp are used together. Additionally, using this pull-out stand allows for quicker and easier installation of Scat SP and Scat SF. Furthermore, it is an item that can be used in various ways for tasks involving a pry bar at construction sites, making it a must-have for any construction site. ~Features of the 【Pull-Out Stand】~ ■ Its size is compact at 180mm × 150mm × 500mm, and it weighs only 5.8kg, making it convenient to carry. ■ The pry bar pivot has six levels, allowing for easy adjustment of height and distance. *For more details, please download the PDF or feel free to contact us.

• Woodworking machines, instruments, and tools

It is used when pulling out the driven【Scat 91】or single pipes. By utilizing our Massgood mechanism, it can be easily removed, and it prevents deformation of the head even when the bolts are tightened. Additionally, it is effective for securely fixing various setup facilities with wires or ropes as a countermeasure against strong winds. ~Features of the Pulling Fitting~ ■ Outer diameter φ48.6, thickness 2.4 mm specification ■ Prevents deformation of the head of Scat 91 and single pipes ■ Uses high-tension bolts, allowing for sufficient tightening torque ■ The bolt head does not get crushed, preventing the bolt from becoming stuck, enabling long-term use with repeated maintenance. *For more details, please download the PDF or feel free to contact us.

• Piles, caissons, sheet piles
• Wood processing
• Woodworking machines, instruments, and tools

The 'Skat SF for Rope' can be installed by anyone, and it is a rope regulation item that can be tightly stretched without tying the rope or driving in nails, preventing sagging. It can be replaced as many times as needed! ~Features of 'Skat SF for Rope'~ ■ By using the arrow chip method developed by our company, the posts will no longer tilt or fall over. ■ Since the posts can be firmly fixed, long distances can be regulated with fewer posts. ■ Both the multi-purpose stakes and rope posts are made of steel with hot-dip galvanized coating, making them resistant to corrosion and durable. ■ The lengths of the multi-purpose stakes are 500mm and 700mm, allowing anyone to install them. *For more details, please download the PDF or feel free to contact us.

• Net fence
• Piles, caissons, sheet piles
• Pile and foundation work

"Skat SF for Net Use" is a rope and net regulation system developed by our company, utilizing the single-pole stake "Skat 91" (patent pending) created through our unique folding process. It combines the new piling method "Arrow Chip Method" (patent pending) and "Sand Filling Method," allowing for easy installation without the need for extensive construction or digging holes. It prevents posts from tilting or falling, and the rope can be easily replaced without loosening. Additionally, it can be fitted with nets or mesh, enhancing regulations to prevent human intrusion, curb illegal dumping of waste, and serve various purposes such as bird and animal nets, temporary enclosures at construction sites, and preventing falling objects. ~Features of "Skat SF for Net Use"~ ■ Various specifications of nets can be attached based on the Skat SF (for rope). ■ Strengthens regulations, prevents human intrusion, curbs illegal dumping, addresses wildlife issues, and prevents falling objects at construction sites. ■ Post heights are available in 1M and 1.5M. *For more details, please download the PDF or feel free to contact us.

• Road facilities
• Pile and foundation work
• Parking lot facility construction

This is a new type of parking stop developed by our company using the innovative pile-driving method called "Arochip Method" (patent pending) and "Sand Filling Method." It allows for easy and quick installation without the need for digging holes or extensive construction, achieving a low price that includes both the product and installation costs. Furthermore, in the event of damage, reinstallation can be done easily without generating leftover soil. We offer products with different functions tailored to various uses, as well as colors that match the landscape and space. *For more details, please download the PDF or feel free to contact us.*

• Road facilities

This is a new type of parking stopper developed by our company, utilizing the patented Arrow Chip Method (patent pending) and the Sand Filling Method. It allows for easy and quick installation without the need for digging holes or extensive construction, achieving a low price that includes both the product and installation costs. Furthermore, in the event of damage, reinstallation can be done easily without generating any leftover soil. We offer products with different functionalities tailored to various uses, as well as colors that match the landscape and space. *For more details, please download the PDF or feel free to contact us.*

• Road facilities

This is a new type of parking stop developed by our company using the innovative pile-driving method called "Arochip Method" (patent pending) and the "Sand Filling Method." It allows for easy and quick installation without the need for digging holes or extensive construction, achieving a low price that includes both the product and installation costs. Furthermore, in the event of damage, reinstallation can be done easily without generating leftover soil. We offer products with different functions tailored to various uses, as well as colors that match the landscape and space. *For more details, please download the PDF or feel free to contact us.*

• Road facilities

Supports all curved constructions of variable and free gradient gutters with four types of models. A residual type steel inner formwork! Compatible with various manufacturers! With bolt adjustments, you can easily adjust the expansion, contraction, and angle misalignment during installation, making it possible for anyone, not just skilled workers, to carry out the construction easily. It is a reliable construction method that is manufactured in the factory and simply assembled on-site. ~Features of the [Inner Formwork]~ ■ The bolt adjustment function (dimension adjustment) absorbs the expansion and contraction during the installation of variable and free gradient gutters! ■ Allows for angle adjustments at corners and curves during the construction of variable and free gradient gutters! ■ Since it is a residual type made of steel panels, there is no need to enter the narrow variable and free gradient gutters to dismantle the formwork! ■ Can be assembled by anyone without the need for skilled workers! ■ A reliable and easy construction method that is manufactured in the factory and assembled on-site! Easy assembly also reduces installation time! ■ Compatible with variable and free gradient gutters or catch basins from various manufacturers! ■ Supports all corners, curves, catch basins, and fittings with four types! *For more details, please download the PDF or feel free to contact us.*

• Formwork material
• Road facilities
• Earthworks