パナック List of Products and Services

At Panac Co., Ltd., we offer fine press processing using roll-to-roll technology. This involves press processing with molds and web feeding using linear motors. Additionally, we can control the punching pattern through "punch stroke amount setting + punch height setting + feed amount setting." Please feel free to consult us when you need our services. 【Processing Examples】 ■ Paper width: 260mm ■ Machine feeding accuracy: ±0.5μm ■ Mold accuracy: ±10–15μm ■ Press pressure: 10t *For more details, please refer to the PDF document or feel free to contact us.

• others

At Panac Co., Ltd., we offer fine press processing of metal foils. We can process thin shapes down to approximately 0.13mm using die-based press processing. We can accommodate both reel finishing and cut-off finishing. Please feel free to consult us when you need our services. 【Processing Examples (Partial)】 ■ Material: Beryllium Copper ■ Material Width: 16.5mm ■ Plate Thickness: 50μm ■ Dimensional Tolerance: ±5μm *For more details, please refer to the PDF document or feel free to contact us.

• others

At Panac Corporation, we accept proposals for construction methods/process considerations tailored to your materials and products. For requests such as "I would like you to cut our in-house developed rubber sheets to specified dimensions and deliver them arranged on a carrier film," we suggest a process utilizing separators. Please feel free to consult us when you have a request. 【Examples of Customer Requests】 ■ I would like you to cut our in-house developed rubber sheets to specified dimensions and deliver them arranged on a carrier film. ■ I would like you to apply hot melt to the supplied film and thermally bond it to plastic parts. *For more details, please refer to the PDF materials or feel free to contact us.

• others

"ZLP" is a low-dielectric adhesive material that comes in a sheet form and can be bonded with various materials such as copper and polyimide. It is a thermosetting adhesive sheet that can be stored at room temperature, and there are two bonding methods: "roll lamination method" and "sheet quick press method." Due to its low dielectric constant and low dielectric loss tangent, it can reduce transmission loss in high-speed communication FPC. 【Adhesive Curing Conditions】 ■ Oven Cure (without pressure): 180°C × 90 min at atmospheric pressure ■ Press Cure (with pressure): 180°C × 90 min at 2.0 MPa *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"AHMS" is a waterproof adhesive sheet for fuel cells that has low leaching of ionic impurities from the adhesive, ensuring that it does not decrease power generation efficiency. It demonstrates good adhesion to various resins such as PET, PPS, and PEN, and is particularly compatible with fluorinated electrolyte membranes used in MEAs. We offer a high-adhesion type "AHMS14H1" and a low-tack type "AHMS15H1." 【Features】 ■ AHMS14H1 - Can be bonded even at low temperatures - Advantageous for bonding films with low heat resistance and for short-time pressing ■ AHMS15H1 - Less stickiness on the adhesive surface - Less likely to cause adhesive overflow during high-temperature heat pressing *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"Panabrit" is a distinctive functional film that combines various functional materials through adhesive lamination. It allows for combinations of "metal foils and plastic films," "different types of metal foils," and "different types of films." We offer a lineup of 6 types of metal foils and 8 types of films, which can be customized according to your needs. 【Metal Foil Lineup】 ■ Aluminum foil 9–80μm ■ Copper foil 6–70μm ■ SUS foil 10–100μm ■ Iron foil 50μm ■ Titanium foil 5μm ■ Brass foil 10μm *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"Panapeel" is a film coated with a non-silicone release treatment layer on PET film and other materials. It is possible to change the type and thickness of the substrate according to your needs. It accommodates various release and slip properties, making it suitable for use with elastomers and resin coating liners. Additionally, there is also a functional film composite called "Panabride." [Features] - A film coated with a non-silicone release treatment layer on PET film and other materials - Accommodates various release and slip properties, suitable for use with elastomers and resin coating liners - Type and thickness of the substrate can be changed according to your needs *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"PDHA1" is a high-hardness acrylic adhesive that has a higher storage modulus compared to general-purpose acrylic adhesives. Due to the hardness of the adhesive layer, when applying a hard coat (HC) film with this product, the hard coat film becomes less prone to denting, thereby suppressing the reduction in film hardness. Additionally, we also offer the stress-relief adhesive "PDSO1," which is resistant to repeated bending and shows no change in appearance even after more than 200,000 cycles. 【Features】 <PDHA1> ■ Has a high storage modulus ■ Capable of suppressing the reduction in film hardness <PDSO1> ■ High loss modulus, making it easy to absorb external stress ■ Strong against repeated bending, showing no change in appearance even after more than 200,000 cycles *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"PDB1/PDB2" is a product suitable for bonding applications of optical components such as Center Information Displays and clusters, using resin cover panels with excellent foam-resistant adhesive properties. Depending on your application, adjustments to the adhesive layer thickness and substrate thickness are possible, as well as laminating and slitting processing on specified substrates. In addition to the standard type "PDB1," we also offer the acid-free type "PDB2." 【Features】 ■ Excellent transparency ■ No foaming or whitening occurs under high temperature and high humidity ■ Superior adhesive reliability to plastics such as polycarbonate *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"Panaclean" is an optical transparent adhesive with excellent optical properties and durability. It does not yellow due to heat or humidity, adheres strongly with high adhesive strength, and can accommodate rework requirements. The highly flexible adhesive prevents air bubbles from being trapped at edges. Additionally, we offer a rich lineup including UV-cut optical adhesive "PDS1UV" and acid-free, foam-resistant "PDB2." 【Features】 ■ Excellent optical properties and outstanding durability ■ No yellowing due to heat or humidity ■ Strong adhesion with high adhesive strength ■ Can accommodate rework requirements ■ Highly flexible adhesive prevents air bubbles from being trapped at edges *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

We would like to introduce our "Low Residue Protective Film for Nanoimprinting." It has high transparency and allows for inspection even while the protective film is applied. It does not leave adhesive residue when laminated onto low-reflective films. It is suitable as a protective film for the shipping and processing of low-reflective films such as those used in nanoimprinting. We offer the standard adhesive thickness of 5μm with "LR5-38" and 20μm with "MP38." Please feel free to contact us if you have any requests. 【Features】 ■ Does not leave adhesive residue when laminated onto low-reflective films ■ High transparency allows for inspection even with the protective film applied ■ Equipped with anti-static properties to prevent foreign matter adhesion *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

We would like to introduce our Panaprotect 'ET-R'. We have developed this product by incorporating a water-soluble primer between the base PET film and the ET adhesive layer, making it easier to peel off the adhesive layer. We collect the separator film (silicone-coated PET) used by our customers after their application, crush it, and then process it through heat treatment to fiberize it, which can be reused as insulation material for winter clothing, car floor mats, stuffing for stuffed animals, etc. 【Specifications (partial)】 ■ Adhesion (N/cm) - Initial: 0.034 - 150℃×2h: 0.092 ■ Water immersion test - 23℃×3h: Adhesive layer peeling - 60℃×0.5h: Adhesive layer peeling *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

We would like to introduce the 'Panaprotect Light Release Grade (Others) / Medium and Heavy Release Grade' that we handle. The "Light Release Grade (Others)" includes three types: silicone-based, urethane-based, and rubber-based, with a total of four varieties. Additionally, the "Medium and Heavy Release Grade" offers eight varieties. These products are suitable for applications such as optical films, protective packaging for shipping, and transport carriers. Please feel free to consult us when you need assistance. 【Product Lineup (Partial)】 <Light Release Grade (Others)> ■ Silicone-based: PX, RX ■ Urethane-based: GPU3 ■ Rubber-based: GPD *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"Panaprotect Light Release Grade (Acrylic-based)" is a re-releasable adhesive film characterized by its heat resistance, adhesion, and re-release properties, featuring a special adhesive processing applied to plastic films such as polyester. It is used in various applications including processing carriers, printing, nameplates, displays, circuit boards, semiconductors, touch sensors, and construction materials. We offer a range from low to medium tack products. Please feel free to contact us if you have any requests. 【Product Lineup (Partial)】 <Ultra Light Release> ■TS ■HP ■CT *For more details, please refer to the PDF document or feel free to contact us.

• Other office supplies

"Gelpoly" is a self-adhesive film that is easy to apply and remove. It is widely used for POP displays on store windows and for screen protection on mobile phones. It has excellent air release properties, allowing for beautiful application even in large sizes. By changing the base film, it can be adapted for adhesion to various materials. 【Features】 ■ Excellent transparency ■ Outstanding air release properties (during application) ■ Easy to apply and remove (easy to reposition) ■ High safety (does not contain heavy metals or ozone-depleting substances) ■ Water-resistant, allowing for safe use *For more details, please refer to the PDF document or feel free to contact us.

• Safety and consumables

"Parachlorella Extract" is a substance that thoroughly extracts the beauty and health components contained in the cells of Parachlorella. The diverse components contained in the extract enhance moisture retention not only on the surface of the skin but also from within, leading to skin that can withstand environmental stress. It shows a higher moisture content than sodium hyaluronate, and high moisturizing effects are expected. [Features] - Thorough extraction of beauty and health components contained in the cells of "Parachlorella" - Enhances moisture retention from within as well as on the surface of the skin - Results indicating that it is a safe material have been obtained through testing - Primary skin irritation test (alternative method) / closed patch test - High moisturizing effects are expected - Improvement effects on rough skin (texture improvement) *For more details, please refer to the PDF document or feel free to contact us.

• others

The raw material is an extract from the microalga Kethoseloscarlitran, which contains fucoxanthin. Mass cultivation is conducted in a closed system at a domestic partner facility. We have established a system to provide the extract as a raw material domestically. Since the cultivation is done in a closed system, we can minimize contamination from other microorganisms. 【Features】 - Mass cultivation in a closed system at a domestic partner facility - A system has been established to provide the extract as a raw material domestically - Various safety tests have been conducted - Expected to be effective against wrinkles and sagging - Expected to have a melanin synthesis inhibitory effect *For more details, please refer to the PDF document or feel free to contact us.

• others

"Preclan" is a functional cosmetic ingredient that is uniquely separated and purified from the bio-gel (extracellular polysaccharides: EPS) secreted by microalgae using proprietary technology. It is known to consist of galactose (67.1%), mannose (22.5%), arabinose (4.7%), rhamnose (4.0%), and xylose (1.7%). Many of these galactose residues are present in the furanose form, and it is predicted from the NMR spectrum that they are β-linked (1.5-β-D-galactofuranose). [Expected Functions] ■ Cell activation (fibroblasts, dermal papilla cells) ■ Enhancement of FGF7 and VEGF production from dermal papilla cells *For more details, please refer to the PDF document or feel free to contact us.

• others

The "PJB-80D4" is a wire banner type projection banner. It is easy to carry, making it suitable for various uses such as events, exhibitions, and limited-time satellites, rather than being a permanent installation like traditional digital signage. Additionally, the projection screen surface allows for inkjet printing, providing a high level of expressive capability by mixing print (analog) and projection (digital). 【Features】 ■ Wire banner type ■ Easy to carry ■ Inkjet printing is possible on the projection screen surface ■ High expressive capability by mixing print (analog) and projection (digital) *For more details, please refer to the PDF document or feel free to contact us.

• Spatial Design
• Other store equipment and supplies
• Other commercial buildings and service facilities

At Panac Advance Co., Ltd., as a result of a joint project with the National Institute of Advanced Industrial Science and Technology's Biotechnology Center (NBRC), we have discovered over 40 types of commercially cultivable "microalgae strains." We will continue to advance our research and development, aiming to find as many new materials from microalgae as possible that can contribute to improving the quality of life (QOL). For more details, please refer to our catalog or feel free to contact us.

• others