ダレスサンドロジャパン List of Products and Services

The "CryOs Gas Unit" is a flexible plant with excellent diversity that can use not only cedar and cypress but also bamboo, birch, and other coniferous trees. The automatic management screw system prevents failures caused by blockages of the biomass input and the produced plant charcoal (biochar). The amount of plant charcoal produced from the gasification furnace can be adjusted from a minimum of 5% to a maximum of 25% of the input chips. 【Features】 ■ Extremely low environmental impact ■ No failures due to blockages ■ Adjustable production volume *For more details, please refer to the catalog or feel free to contact us.

• others
• Gas equipment

The "BRIK Series" is a briquette molding machine that utilizes wood pellets and briquettes made from leftover wood materials and thinned timber from lumber mills, enabling thermal utilization for heating and hot water supply, as well as power generation. It can operate for 24 hours at a pressure of 2000 kg/cm², and we offer a series with a production capacity of 200 to 2000 kg/h (2 tons) per hour. The briquettes produced by this mechanical machine are far superior in quality, compression ratio, and calorific value compared to those made by hydraulic molding machines. It is also capable of producing various shapes, including round, square, hollow internal types, and pucks (short briquettes), all with a single machine. 【Features】 ■ High reliability and durability with a long lifespan ■ Ease of maintenance and production cost efficiency ■ High-precision structural design ■ Extremely high compression molding capability ■ Significant volume reduction *For more details, please refer to the catalog or feel free to contact us.

• others

The "CSL Series" is a combustion furnace that complies with structural standards without the need for notification. It features a safe design with an open structure that eliminates risks such as explosions and blowouts, allowing for safe use even without specialized knowledge. We offer a lineup that can accommodate everything from general households to large-scale facilities with high hot water demand. [Features] ■ High-durability smoke tube heat exchange system ■ Output control based on water temperature in the tank ■ Adoption of combustion exhaust gas oxygen concentration regulation ■ Durability of over 20 years ■ Excellent heat and corrosion resistance *For more details, please refer to the catalog or feel free to contact us.

• others
• Refrigeration units, boilers, cooling towers
• Heating and cooling equipment and facilities

The "CSL Series" is a high-efficiency combustion system that uses firewood as fuel. It has a compact appearance and can be easily installed. The operation is also simple. It is suitable for a wide range of applications, including heating for mushroom houses (shiitake, enoki, shimeji), heating for livestock and poultry barns, residential homes, public facilities, small-scale nursing facilities, and emergency hot water heat sources during disasters. 【Features】 ■ Temperature settings from 40°C to 85°C ■ High-efficiency combustion system with proportional control ■ Automatic combustion control function ■ Overheating prevention function ■ Up to 40% fuel reduction possible *For more details, please refer to the catalog or feel free to contact us.

• others
• Refrigeration units, boilers, cooling towers
• Heating and cooling equipment and facilities

The "SABIANA unit" is a heat exchanger with a special structure. The material consists of 1mm thick tubes made of 0.7mm copper. The balance between the diameter of the water supply pipe (22mm) and the air flow output is very excellent. The fan coil uses hot water heated by biomass boilers in winter and cold water cooled by chillers in summer to set the temperature inside agricultural greenhouses. It can blow air to every corner of the greenhouse, enabling stabilization of the ambient temperature. 【Features】 ■ Wide range of applications ■ Excellent heating and cooling capacity ■ Made of SUS (stainless steel) ■ European standards (CE) *For more details, please refer to the catalog or feel free to contact us.

• Heating and cooling equipment and facilities

The "PT Series" is a pelletizer system that utilizes a special three-axis pressure roll method, allowing for average pressure application from low to high output. Its simple and robust structure requires minimal maintenance. The vertical low center of gravity design results in less vibration and easy installation. The machine body is compact, and by sequentially starting low-output motors, it can reduce the capacity of the power supply equipment. 【Features】 ■ Compact design ■ Easy to handle with an input ■ Energy-saving type *For more details, please refer to the catalog or feel free to contact us.

• others

The "CSA/GM Series" is a pellet boiler that features a simple and compact combustion structure, designed for burning wood chips. It is capable of fully automatic operation and easy control, making it suitable for installation in both large and small facilities. With a multi-tube flue gas structure, it conducts heat exchange throughout the entire unit, providing high efficiency and stable hot water supply. Its unique fuel supply system allows for long-duration supply. By adopting a primary and secondary combustion system, it achieves clean exhaust. Its simple structure minimizes troubles and guarantees safe and reliable operation. 【Features】 ■ Abundant combustion control technology ■ Simple appearance and robust durability ■ Equipped with pollution control features and an automatic flue cleaning device *For more details, please refer to the catalog or feel free to contact us.

• others
• Refrigeration units, boilers, cooling towers
• Heating and cooling equipment and facilities

The "Briquetting Series" is a device that can convert various types of waste into solid fuel and produce briquette fuel. Any dry material under 12mm, such as fuel residues, construction waste, and wood chips, can be solidified into briquettes and used as regular fuel or firewood. It has high storage efficiency and does not promote insect growth, making it suitable for emergency and disaster stockpiling of fuel. 【Features】 ■ High reliability and long operational lifespan ■ Low maintenance and operational costs ■ High structural quality ■ High compression pressure ■ Easy integration into existing production lines ■ Significant volume reduction ■ Reduction in transportation costs *For more details, please refer to the catalog or feel free to contact us.

• others