高尾 List of Products and Services

The "Hook Corner" is a column joint hardware that corresponds to the announcement symbol (ha) with fewer screws and allows for speedy installation of hardware. It can be installed with just four screws, enhancing work efficiency. With dimensions of 30mm in width, 50mm in height, and a thickness of 1.6mm, the product is compact and can be installed neatly. By fixing the product to the column with temporary clips, working at heights becomes easier. 【Features】 ■ Compatible with corner columns ■ N value of 1.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet) structural SGH490 ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Performance test (mid-column type) short-term standard joint strength: 6.7kN ■ Performance test (corner column type) short-term standard joint strength: 6.4kN *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Flat Plate Slim Plywood Specification" is used for the connection of columns and horizontal members. It can be installed over structural plywood with a thickness of 12mm or less. Please secure 2 dedicated corner bit screws TB-55 on the column side and 3 on the horizontal member side. This product has passed joint performance tests conducted by House Plus Inspection Co., Ltd. 【Features】 ■ Plywood specification ■ N value of 1.0 or less ■ High corrosion resistance and high tensile strength, 0.6mm thickness ■ Short-term standard joint load capacity of 5.7kN ■ Material: NSDC570, manufactured by Nippon Steel Corporation ■ Surface treatment: Alloy-coated steel sheet "Super Dyma," ZQNK18 chrome-free *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Flat Plate Slim" is used for the connection of columns and horizontal members. By limiting the number of screws used to five, construction efficiency has improved. It uses "Super Dyma," which has excellent corrosion resistance and does not contain hexavalent chromium compounds. This product has passed quality performance certification tests by the Japan Building Materials Testing Center. 【Features】 ■ N-value 1.1 or less ■ Short-term allowable tensile strength 6.1 kN ■ Material: NSDC570 manufactured by Nippon Steel Corporation ■ Embossed processing on the screw insertion part ■ Surface treatment: Alloy-coated steel sheet "Super Dyma" ZQNK18 chrome-free *For more details, please refer to the PDF materials or feel free to contact us.

• Support hardware/opening hardware

The "Flat Plate SD" has a thickness of 0.6mm (compared to the conventional corner hardware which has a thickness of 2.3mm), allowing structural plywood and similar materials to be directly attached over the hardware. The screw-in area has an embossed finish, so the screw heads do not protrude. It uses "Super Dima R," which has excellent corrosion resistance. It has a load capacity equal to or greater than that of the Z-shaped plate VP. 【Features】 ■ N value of 1.1 or less ■ High corrosion resistance and high tensile strength at 0.6mm thickness ■ Short-term allowable tensile strength of 5.9kN ■ Performance certified by the Japan Home and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Small Corner II Floor Plywood Specification" can be installed over the floor plywood without cutting it. By simply driving two 75mm screws into the horizontal member and two 43mm screws into the post side, construction efficiency can be improved. 【Features】 ■ N-value 0.81 or less ■ Short-term standard joint strength 4.3kN ■ Compatible with floor plywood up to 30mm thick ■ Product tested for joint performance by House Plus Inspection Co., Ltd. *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

"Small Corner II" is used for the connection of columns and horizontal members. It has short-term standard joint strength, and since it only requires two screws on the horizontal member side and two on the column side with a 43mm screw, it improves construction efficiency compared to CP-L. This product has passed joint performance testing by House Plus Inspection Co., Ltd. 【Features】 ■ N-value of 0.66 or less ■ Improved construction efficiency compared to CP-L ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Easy installation of exterior walls as it is mounted on top of the horizontal member ■ Compact size with a width of 28mm and height of 47mm, allowing for easy installation ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Column Mounting Plate" is used for the connection between the column in the middle passage and the side of the horizontal members, as well as the connection between the beam and the roof supports. Align the main body with the joint between the column and the side of the horizontal members. Please secure it with the dedicated square bit screw TBA-45 (6 pieces). For tightening the dedicated square bit screw TBA-45, please use the separately sold No. 3 square bit. 【Features】 ■ N value 0.2 or less ■ Material: JIS G 3302 (hot-dip galvanized steel sheet and steel strip) SGHC or SGCC ■ Surface treatment: hot-dip galvanized steel sheet (Z27) ■ Convenient for joining columns in the middle passage where horizontal members intersect in a cross shape ■ Equivalent certified product to Z-mark hardware (Kasuagai C) *For more details, please refer to the PDF materials or feel free to contact us.

• Support hardware/opening hardware

"Flat Kasugai II" is used for joining large beams and floor supports, columns and horizontal members, pipe columns and body ties, as well as roof beams and roof supports. Due to its triangular cross-section, the surface after installation will be flat. Additionally, the chamfer at the tip is oriented inward, making it difficult for the claws to open during installation. We also offer "Flat Kasugai 90." 【Features】 ■ N-value 0.4 or less ■ Joint performance tested ■ Material: Equivalent to JIS G 3532 SWM-N ■ Packaging (1 case): 600 pieces (100 pieces x 6) ■ Surface treatment: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Double Brace for Metal Construction Method, Floor Plywood Specification" is suitable for fixing braces on top of floor plywood (30mm thick or less). It is used when joining the ends of braces that are 45mm x 90mm or larger (with a wall multiplier of 2). The main metal body is attached to the floor plywood using four dedicated square bit screws TB-76 on the horizontal member side and four dedicated square bit screws TBA-45 on the column side. 【Features】 ■ Floor plywood specification ■ Usable for traditional construction methods ■ Surface treatment: Hot-dip galvanized steel plate (Z27) ■ Standard shear resistance per meter for brace walls: 3.78kN ■ Material: JIS G 3302 (hot-dip galvanized steel plate and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Double Brace for Hardware Construction" has symmetrical standard dimensions, allowing it to be installed in any orientation—up, down, left, or right. It is used when joining the ends of braces that are 45mm×90mm or larger (with a wall strength ratio of 2). The main body of the hardware is attached to the five columns and horizontal members using dedicated square bit screws TBA-4 (8 pieces). 【Features】 ■ Usable for traditional construction methods ■ Surface treatment: Hot-dip galvanized steel plate (Z27) ■ Standard shear resistance per meter for brace walls: 3.37kN ■ The hardware has symmetrical standard dimensions, allowing installation in any orientation ■ Material: JIS G 3302 (hot-dip galvanized steel plate and steel strip) SGHC or SGCC *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Double Brace (Plain)" is used when joining the ends of braces that are 45mm x 90mm or larger (wall strength ratio 2 times). Even when installing braces on top of floor plywood, they can be fixed from the side (for floor plywood 28mm thick or less). The screw holes on the brace side are arranged to accommodate the angle of the brace. 【Features】 ■ Can be fixed from the side (for floor plywood 28mm thick or less) ■ Thin with a plate thickness of 1.2mm (conventional brace plates are 2.3mm) ■ The hardware has an embossed finish, so the screw heads do not protrude ■ The screw holes on the brace side can accommodate the angle of the brace ■ Product tested for quality performance by the Japan Building Materials Testing Center *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "B Eaglet 2x" is a hardware shape that avoids interference with vertical bolts for hold-downs, whether used externally or internally. In the joist method, it can be installed even in places where bracing comes at the edge of the joist. This product is used when joining the ends of bracing (wall strength ratio of 2x) that are 45mm x 90mm or larger. 【Features】 ■ Hardware shape that avoids interference with vertical bolts for hold-downs ■ Reduces interference with hold-down hardware, etc., when used internally ■ Does not interfere with beam support hardware even at the junction with bracing ■ Can be installed even in places where bracing comes at the edge of the joist ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components

The "Hexa Plate SD" is designed to be installed on the side of horizontal members, reducing interference with hold-down hardware and similar components. With a thickness of 0.6mm (compared to the conventional brace plates which are 2.3mm), it does not require notching, allowing for direct attachment of structural sheathing and similar materials over the hardware. This product is used when joining the ends of braces that are 30mm×90mm or larger (wall strength ratio of 1.5 times), 45mm×90mm or larger (wall strength ratio of 2 times), and 90mm×90mm or larger (wall strength ratio of 3 times). 【Features】 ■ Reduces interference with hold-down hardware and similar components ■ No notching required due to the thin thickness of 0.6mm ■ Allows for direct attachment of structural sheathing and similar materials over the hardware ■ Embossed design prevents screw heads from being exposed ■ Performance certified by the Japan Housing and Wood Technology Center *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Column Fit" is used when connecting a 45mm x 90mm brace (with a wall strength ratio of 2) to a column. Since the standard dimensions of the hardware are symmetrical, it can be installed in any orientation—up, down, left, or right. Additionally, because screws for fastening to the horizontal members are not required, it can be installed even with floor panels in place. 【Features】 ■ No need to notch the horizontal members ■ No screws required for fastening to the horizontal members ■ Can be installed even with floor panels in place ■ Can be installed in any orientation—up, down, left, or right ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components

The "Double Brace (Multi)" does not require notching of columns or horizontal members, allowing for the connection of 45mm x 90mm braces (wall strength ratio of 2). Since screws for fastening to horizontal members are not needed, installation is possible even with floor plywood (thickness of 28mm or less). Additionally, the width of the hardware is 45mm, making it more accommodating for internal use. 【Features】 ■ No need to notch columns or horizontal members ■ No screws required for fastening to horizontal members ■ Installation is possible even with floor plywood ■ Better fit for internal use ■ Equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Double Brace (Try)" is used when joining 45mm x 90mm braces (with a wall multiplier of 2) to columns and horizontal members. It is lightweight and compact, and the standard dimensions of the hardware are symmetrical, allowing for installation in any orientation—up, down, left, or right. Additionally, in the case of a true wall, the "folded" part is cut out by 40mm, ensuring that the hardware does not become exposed. 【Features】 ■ Lightweight and compact ■ Symmetrical standard dimensions of the hardware ■ Installable in any orientation—up, down, left, or right ■ In the case of a true wall, the "folded" part is cut out by 40mm, preventing hardware exposure ■ Equivalent certified product to Z-mark hardware (BP-2) *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components

The "double brace connector" is used when joining the ends of braces (wall strength factor of 2) that are 45mm x 90mm or larger. The screw-in parts for the base and columns are embossed, allowing for a good fit of the braces. Additionally, in the case of a true wall, the "folded part" is cut out by 60mm, so the connector is not exposed. 【Features】 ■ Embossed processing (screw-in parts for the base and columns) ■ No need to notch the columns or horizontal members, allowing for the joining of brace ends ■ Can be installed in any direction (up, down, left, right) ■ In the case of a true wall, the "folded part" is cut out by 60mm, preventing exposure of the connector ■ Certified equivalent to Z-mark hardware (BP-2) *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "1.5x Bracing (Libero)" is a bracing connection hardware designed for wall strength of 1.5 times, which can reduce interference with floor plywood and hold-down hardware. Since screws that attach to the foundation are not required, installation is possible even if floor plywood is placed between the foundation and the hardware. Additionally, by fixing the bracing at a position away from the edge of the horizontal member, interference with other hardware at the joint ends can be minimized. 【Features】 ■ No screws required for attachment to the foundation ■ Installation possible even with floor plywood between the foundation and hardware ■ Can be installed without distinction in the upper, lower, left, or right ends of the bracing ■ Reduces interference with other hardware at the joint ends ■ Quality performance testing completed by a certified building material testing center *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Double Brace (Libero II)" is a brace joint hardware designed for wall shear resistance of 2 times and 3 times. It standardizes the use of screws to one type for ease of use and reduces interference with floor plywood and hold-down hardware. Additionally, the symmetrical shape of the hardware allows for installation without distinction between the top, bottom, left, and right of the brace. 【Features】 ■ Standardizes the use of screws to one type ■ Significantly improves work efficiency ■ Allows installation without distinction between the top, bottom, left, and right of the brace ■ Suitable for fixing braces on floor plywood (30mm thick or less) ■ Quality performance tested under the House Plus housing warranty *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Hold Down Corner for 10kN" is used for the connection between beams and columns, as well as between beams themselves. It can be installed even after the beams and columns have been constructed. During renovations, it allows for the connection between beams without the need for drilling holes for gusset bolts or making alterations to the exterior walls. 【Features】 ■ Short-term allowable tensile strength: 13.5kN ■ Used for the connection between beams and columns, as well as between beams ■ Can be installed even after the beams and columns have been constructed ■ No need for drilling holes for gusset bolts or making alterations to the exterior walls during renovations *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components

The "Renovation Hagoita Set" is used for joining horizontal members and columns, as well as for connecting horizontal members to each other. When connecting existing building beams and girders, it can be installed without modifying the exterior walls or processing bolt holes. Due to the long section that receives the bolt threads, it is also sufficiently capable of pulling the horizontal members together. 【Features】 ■ Can be installed on beams perpendicular to the girders without drilling bolt holes ■ Allows for joining horizontal members without modifying the exterior walls ■ Long section that receives the bolt threads ■ Short-term standard joint strength: 11.9 kN *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Column Replacement Pipe Corner" is used for joining columns and horizontal members. It allows for the connection of columns and horizontal members without mortise processing, making it suitable for seismic reinforcement of existing wooden houses. It can also be used with solid wood. This product has been tested for performance by the Building Materials Testing Center and House Plus Inspection Co., Ltd. 【Features】 ■ Suitable for seismic reinforcement of existing wooden houses ■ Easy to install as it allows for joining columns and horizontal members without mortise processing ■ Can be used with solid wood for both columns and horizontal members ■ Performance tested by the Building Materials Testing Center and House Plus Inspection Co., Ltd. *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components

The "Flat Brace Plate" is a suitable brace hardware for renovations and similar applications. It supports wall ratios of 1.5 times and 2 times, and can be installed from the inside. It is used to join the ends of braces that are 30mm×90mm or larger (for a wall ratio of 1.5 times) and 45mm×90mm or larger (for a wall ratio of 2 times). 【Features】 ■ Reduces interference with hold-down hardware and similar items ■ Allows for brace installation without removing the exterior wall during renovations ■ With a thickness of 0.6mm, it does not require notching ■ Structural plywood and similar materials can be directly attached over the hardware ■ The embossed finish ensures that screw heads do not protrude *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "ATS (Anchor Tie-Down System)" is a system designed to suppress the overturning forces that buildings experience during earthquakes and typhoons. By connecting the shear walls on each floor with rods and securing the upper part of the shear walls with plate washers, it resists the pulling forces generated during earthquakes and strong winds. It prevents the overturning of shear walls and can withstand pulling forces exceeding 300 kN. 【Features】 ■ Capable of withstanding pulling forces exceeding 300 kN ■ Absorbs gaps between nuts and washers caused by the drying shrinkage and settling of wood ■ Uses deformed full-thread steel rods with a large screw pitch for anchor bolts and rods ■ Significantly improves workability compared to standard double-thread bolts *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components
• Safety and consumables
• Safety Supplies

The "Medium Bolt CB" offers a wide range of products tailored for various applications, including beam joints, 105 width materials for single pulls, and 90 width materials for double pulls. Sizes range from M12×20 to M12×140 in six variations. Additionally, M12 spring washers (sold separately) are also available. 【Features】 ■ Material: JIS B 1180 and JIS B 1051 (carbon steel satisfying strength classification 4.6) ■ Surface treatment: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Multi-Bolt MB" product line is available for applications using 90mm, 105mm, and 120mm wide materials. There are three sizes: φ33×12×103, φ33×12×118, and φ33×12×133. The material used is "JIS B 1180 and JIS B 1051 (carbon steel satisfying strength classification 4.6)." 【Features】 ■ Material: JIS B 1180 and JIS B 1051 (carbon steel satisfying strength classification 4.6) ■ Surface treatment: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Drift Pin MDP" offers a lineup of products for various applications, including 90mm width materials, 105mm decorative, and 120mm decorative. There are four sizes available: φ12×85, φ12×95, φ12×103, and φ12×118. The material used is "JIS G 3505 SWRM 8." 【Features】 ■ Material: JIS G 3505 SWRM 8 ■ Surface treatment: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Foundation Joint Fitting DT" is used for joining foundation joints. The construction procedure involves inserting the DT into the foundation joint where the leading pin (on the lower end of the foundation) has been driven in, and then driving in two fixing pins to complete the process. The size available is 2.3×136×79 (mm). 【Features】 ■ Used for joining foundation joints ■ Material: JIS G 3302 SGHC ■ Surface treatment: Hot-dip galvanized (Z27) *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Column Base Hardware MC" is used for the connection of column bases. The surface treatment is cationic electrodeposition coating. A φ60 hole is drilled vertically in the base for installation. We offer two types in our lineup: "MC-105" and "MC-120." 【Features】 ■ Used for the connection of column bases ■ Material - Pipe section (φ21.7): JIS G 4053 SCM415 - Base body (4.5mm thick): JIS G 3445 STKM 12C - Base bottom plate (9.0mm thick): JIS G 3131 SPHC - Washer (6.0mm thick): Equivalent to JIS G 3101 SS400 ■ Surface treatment: Cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Column Base Hardware MCK" is a type of column base hardware used for the connection of column bases, designed with a foundation packing specification. We offer a lineup including "MCK-105CN" with dimensions of 105×300×355mm, as well as "MCK-120CN," "MCK-105ST," and "MCK-120ST" with dimensions of 120×307.5×370mm. 【Features】 ■ Used for the connection of column bases ■ Foundation packing specification ■ Material - Base part (4.5mm thick): JIS G 3101 SS400 - Base part (3.2mm thick): JIS G 3131 SPHC - Pipe part (φ21.7): JIS G 4053 SCM415 - Washer part: JIS G 3101 SS400 ■ Surface treatment - Entire column base hardware: Cationic electrodeposition coating - Round washer: JIS H 8610 (electro-galvanized) and JIS H 8625 Ep-Fe/Zn8/CM2 C *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Column Base Hardware CKB" is used for the connection between the foundation and the column base. *Please secure it with anchor bolts of strength grade 4.8 or higher. The surface treatment is JIS H 8641 hot-dip galvanized HDZ 35. We offer "CKB-105" and "CKB-120" in our lineup. 【Features】 ■ Used for the connection between the foundation and the column base ■ Material - Plate part (9mm-6mm): Equivalent to SPHC - Round bar part (φ21.7): Equivalent to 20CrMo - Dedicated washer: Equivalent to SPHC ■ Surface treatment: JIS H 8641 hot-dip galvanized HDZ 35 *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Hozopipe MHP" is used for joining column connections. The materials include "MHP-118," which is made of JIS G 3302 structural SGH400, as well as "MHP-118 (+)," "MHP-178," and "MHP-178 (+)" among others. 【Features】 ■ Used for joining column connections ■ Extensive lineup *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components

The "Main Beam and Joist Connector MH" is used for the connection of 90mm square main beams and joists. *When using it for joists, if the joist level is -1mm to -48mm, please use the Japanese-style joist connector MO. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. 【Features】 ■ Used for the connection of 90mm square main beams and joists ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Large Beam Receiving Hardware MO for Japanese-style Rooms" is designed to accommodate large beams with dimensions of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. It is used when the beam level is between -1mm and -48mm. * For a beam level of 0mm, use the beam receiving hardware MH for rafters and large beams. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. 【Features】 ■ Accommodates large beams of 90mm and 105mm when they are lower than the top of the horizontal members in Japanese-style rooms, etc. ■ Used when the beam level is between -1mm and -48mm ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating * For more details, please refer to the PDF document or feel free to contact us.

• Joints between components

The "Beam Support Hardware NB" accommodates beam heights from 150mm to 360mm and roof slopes from 3.1 to 10 inches. *For roof slopes up to 3 inches, use the beam support hardware MH. The material is JIS G 3302 structural SGH400, and the surface treatment is hot-dip galvanized (Z27) and cationic electrodeposition coating. We offer "NB-90," as well as "NB-90G," "NB-120," and "NB-120G." 【Features】 ■ Accommodates beam heights from 150mm to 360mm and roof slopes from 3.1 to 10 inches ■ Material: JIS G 3302 structural SGH400 ■ Surface treatment: hot-dip galvanized (Z27), cationic electrodeposition coating *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "Beam Support Hardware MH" can be used by combining three types of beam support hardware, fulfilling the roles of six different beam support hardware types, and accommodating beam heights from 105mm to 450mm. The material is JIS G 3302 structural SGH400, with surface treatment of hot-dip galvanizing (Z27) and cationic electrodeposition coating. Additionally, we offer the "Beam Support Hardware MH (Joint Specification)" which is used to connect two Beam Support Hardware MH units with CB-20 for beam joint connections. 【Features】 ■ Beam Support Hardware MH - By combining three types of beam support hardware, it fulfills the roles of six different beam support hardware types. - Accommodates beam heights from 105mm to 450mm. ■ Beam Support Hardware MH (Joint Specification) - Used to connect two Beam Support Hardware MH units with CB-20 for beam joint connections. *For more details, please refer to the PDF document or feel free to contact us.

• Support hardware/opening hardware

The "T-WOOD FRAME" is a column-beam frame installed within a wooden frame structure. It is possible to achieve both shear walls and openings. Since it is constructed without using special materials, it does not require a high level of skill for the work and can be constructed smoothly. 【Features】 ■ It provides openings that can secure garage space and daylight while ensuring rigidity similar to shear walls. ■ It allows for better balance in the building, expanding the freedom of layout planning. ■ It can be installed in newly constructed traditional wooden frame buildings. ■ The spacing between the columns of the frame can accommodate spans from 1,818 mm to 6,370 mm. *For more details, please refer to the PDF materials or feel free to contact us.

• Other opening accessories (airtight materials around doors and windows, etc.)

The "Orga Metal Brace (for horizontal use)" is a horizontal brace that ensures the floor amplification of horizontal structural systems, accommodating a spacing of 0.9 to 5.5 meters between horizontal members. You can select the floor amplification of any floor framing within the applicable range from the floor amplification list. It can be installed later by screwing into existing frameworks, making it suitable for renovations. 【Features】 ■ You can select the floor amplification of any floor framing within the applicable range from the floor amplification list. ■ It can be installed later by screwing into existing frameworks, making it ideal for renovations. ■ When used in conjunction with fire bracing or structural plywood as specified in the Ministry of Land, Infrastructure, Transport and Tourism Notification No. 1347 of 2001, the respective floor amplifications can be added together. ■ It has received evaluation from House Plus Inspection Co., Ltd. ・HP Evaluation (Wood) -14-008 *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components
• Miscellaneous metal items
• Interior and exterior construction accessories

The "Orga Metal Brace (for walls)" is a steel brace that can secure a wall strength ratio of 2.0 times by being installed in a crisscross manner within the wall. It is suitable for seismic reinforcement in new constructions and renovations. Since the end fittings can only be installed with dedicated screws, the processing of existing columns and horizontal members is minimized. 【Features】 ■ Secures a wall strength ratio of 2.0 times by being installed in a crisscross manner within the wall ■ End fittings are installed using only dedicated screws ■ Installation is possible by simply removing either the inside or outside of the existing wall ■ Approved by House Plus Inspection Co., Ltd. ・HP Approval (Wood) - 13-005-01 *For more details, please refer to the PDF materials or feel free to contact us.

• Joints between components
• Miscellaneous metal items
• Interior and exterior construction accessories

We will pick the necessary quantities from the hardware and auxiliary materials list and package them by residence. Various hardware and auxiliary materials will be packaged in the required quantities and sorted by color tape for each residence. Delivery will be made via various company delivery services. Additionally, we will propose products that suit our customers from a diverse range of items we handle. 【Service Details】 ○ Ordering: Please contact us with your hardware and auxiliary materials list via phone, fax, or email. ○ Picking: We will pick the necessary quantities from the hardware and auxiliary materials list and package them by residence. ○ Delivery: Delivery will be made via various company delivery services. For more details, please contact us or download the catalog.

• Subsidiary materials
• Metalwork