育良精機 List of Products and Services

The lineup includes the "OS20VRII," as well as the 16-inch type "OS16VRII" and the 12-inch type "O12VRII." High-pressure coolant and oil coolers manufactured by Ikura Seiki can be installed in the space between the stands. 【Features】 ■ Oil type ■ Touch panel ■ Synchronization device ■ Receiving device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• others

The "OS12REII-12/7" is a bestselling automatic bar feeder for 12-inch models that pursues convenience and uniqueness. For materials with a diameter of φ1 to 12mm, the length is 2.5M, and for φ1 to 7mm, it is 3.0M. For materials with a diameter of φ2 or less, the use of model 7 is recommended. The material supply guide arm ensures stable supply of materials ranging from fine wire φ1 to a maximum of φ12 using the same supply system. 【Features】 ■ Oil type ■ Touch panel ■ Tip vibration stop ■ Synchronization device ■ Feed arrow confirmation *For more details, please refer to the PDF document or feel free to contact us.

• others

"OS4REII" supports further fine material processing. Utilizing years of experience, it ensures a stable supply of ultra-fine materials without bending them through a unique system. "OS4REYII" separates and supplies one piece from a bundle of rods. It features a swing pickup system that automatically supplies one piece while reducing the load on the bundled materials. 【Features】 ■ Oil-based ■ Touch panel ■ Synchronization device ■ Receiving device ■ Next material receiving device ■ Option: Machine vibration stop *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SS110REII・SS90REII" is a high-performance fully automatic feeding machine for short and thick materials. Adjusting the core height of the material shelf and the primary feeding V-rail is a simple operation that only requires inputting the material diameter on the touch panel, which can reduce setup time. When inserting the tip guide into the CNC lathe, core adjustment can be done semi-automatically. 【Features】 ■ Oil-free ■ Touch panel ■ Tool-free ■ Receiving device ■ Next material receiving device *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SS65VRII/LS・SS51VRII" is a supply machine designed for medium-sized and short materials, perfected in functionality. It receives and quietly and reliably supplies materials to the rail. The maximum length of the bar material is the length that fits within the main spindle. Since leftover materials are discharged forward, please confirm that it is not a problem if they fall inside the lathe. 【Features】 ■ Oil-free ■ Touch panel ■ Tool-less ■ Receiving device ■ Next material receiving device *For more details, please refer to the PDF document or feel free to contact us.

• others

The "SSH32II/LS・SSH20II" is a hopper-type feeding machine for short materials (leftover materials) born from the concept of "mottainai" (a Japanese term for wastefulness). It supports high-precision processing for materials up to 600mm in length. The sliding mechanism makes it suitable for setup changes and maintenance on the CNC lathe side. 【Features】 ■ Oil-free ■ Touch panel ■ Tool-free ■ Feed arrow confirmation ■ Hopper ■ Option: Slide *For more details, please refer to the PDF document or feel free to contact us.

• others

The "IH32・IH20" is an auxiliary machine that can be attached to the BARTOP, allowing for effective utilization of leftover materials. The rod material capacity is φ8-360 pieces, φ20-58 pieces, and φ32-23 pieces. The applicable material length and diameter vary depending on the feeding machine. 【Features】 ■ Enables effective utilization of leftover materials by attaching to the BARTOP ■ Rod material capacity: φ8-360 pieces, φ20-58 pieces, φ32-23 pieces ■ Applicable material length and diameter vary depending on the feeding machine ■ Option: Top cover *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ISL-20" is an auxiliary machine that can be attached to a BARTOP, allowing for the storage of a large quantity of bar materials at once. The 3.0M bar material capacity is for φ10-200 pieces, with a maximum weight of 300kg. The 4.0M bar material capacity is for φ20-100 pieces, with a maximum weight of 1000kg. Depending on the model, the operation panel and leftover material box of the supply machine will be on the attachment side. 【Features】 ■ Allows for the storage of a large quantity of bar materials at once when attached to a BARTOP ■ 3.0M bar material capacity is for φ10-200 pieces, with a maximum weight of 300kg ■ 4.0M bar material capacity is for φ20-100 pieces, with a maximum weight of 1000kg ■ Depending on the model, the operation panel and leftover material box of the supply machine will be on the attachment side *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce our products, the "IBC-30A" and "IBC-50H." The "IBC-30A" is a fully automatic material end processing machine, while the "IBC-50H" is a semi-automatic machine suitable for end processing of bar materials before placing them on the BARTOP. 【Features】 ■ IBC-30A - Fully automatic material end processing machine ■ IBC-50H - Semi-automatic - Suitable for end processing of bar materials before placing them on the BARTOP *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ISK-MPC2M・ISK-MPCD2M" is a medium-pressure coolant system. Space-saving and compact. It effectively removes chips with its efficient (medium-pressure) flow. Additionally, the double pump configuration is suitable for simultaneous discharge of two systems without reducing flow. 【Features】 ■ Space-saving and compact ■ Can be installed in the lower space of an automatic bar feeder (bar top) ■ Effectively removes chips with its efficient (medium-pressure) flow ■ The double pump configuration is suitable for simultaneous discharge of two systems without reducing flow *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ISK-HPC14MY・10MY・7M" is a high-pressure coolant system. It contributes to increasing production efficiency per floor area of the factory, effectively removing chips, extending tool life, and enabling high-precision machining. It features a horizontal design unique to supply machine manufacturers, allowing it to be installed in the lower space of an automatic bar feeder (Bar Top). Additionally, we also offer a dedicated "oil cooler" for the lower part of the supply machine. 【Features】 ■ Space-saving and low-profile ■ Horizontal design that can be installed in the lower space of an automatic bar feeder (Bar Top) ■ Contributes to increasing production efficiency per floor area of the factory ■ Effectively removes chips, extends tool life, and enables high-precision machining *For more details, please refer to the PDF document or feel free to contact us.

• others

The "ISK-EM-15eII・8eIII" is an electric dust collector mist collector that accommodates both oil-based and water-soluble mist. To ensure collection performance, all models are equipped with a function that adjusts the airflow to an optimal speed according to the airtightness and volume of the machining chamber of the automatic lathe. We offer a liftable stand that can be installed above the feeding machine and a fixed stand with casters for easy transportation and installation. 【Features】 ■ Compatible with high-concentration mist from medium and high-pressure coolant systems ■ Accommodates both oil-based and water-soluble mist ■ Simplifies the cumbersome setup process through standardization of installation methods with dedicated stands ■ Provides a liftable stand that can be installed above the feeding machine and a fixed stand with casters for easy transportation and installation *For more details, please refer to the PDF materials or feel free to contact us.

• cleaning

The "CW-700LD" is a soundproof cable winch equipped with an LCD display. Visibility is enhanced with large characters and indicators. It features a load preset mechanism and a reverse prevention mechanism, with a high-speed winding speed of 21.9 to 11.5 m/min and a low-speed winding speed of 12.5 to 6.6 m/min. Additionally, a foot switch (cable length: 2m) is included as standard equipment. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Winding capacity: High speed: 3.9 kN, Low speed: 6.9 kN ■ Winding speed: - High speed: 21.9 to 11.5 m/min - Low speed: 12.5 to 6.6 m/min ■ Power supply: AC100V 50/60Hz ■ Output: 750W *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "CW-1500LD" is a soundproof cable winch equipped with an LCD display. The visibility is enhanced with large characters and indicators. It features a load preset mechanism and a reverse prevention mechanism, with a high-speed winding speed of 10.2 to 4.4 m/min and a low-speed winding speed of 5.8 to 2.5 m/min. Additionally, a foot switch (cable length: 2m) is included as a standard accessory. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Winding capacity: High speed: 7.8 kN, Low speed: 14.7 kN ■ Winding speed: - High speed: 10.2 to 4.4 m/min - Low speed: 5.8 to 2.5 m/min ■ Power supply: AC100V 50/60Hz ■ Output: 750W *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "CW-2500LD" is a soundproof cable winch equipped with an LCD display. Visibility is enhanced with large characters and indicators. It features a load preset mechanism and a reverse prevention mechanism, with a high-speed winding speed of 6.4 to 3.5 m/min and a low-speed of 3.7 to 2.0 m/min. Additionally, a foot switch (cable length: 2m) is included as a standard accessory. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Winding capacity: High speed: 14.7 kN, Low speed: 24.5 kN ■ Winding speed: - High speed: 6.4 to 3.5 m/min - Low speed: 3.7 to 2.0 m/min ■ Power supply: AC100V 50/60Hz ■ Output: 750W *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

We would like to introduce our cable winch 'CW-2500'. This standard model has a winding capacity of 14.7kN at high speed and 24.5kN at low speed. It also features a load preset mechanism and a reverse prevention mechanism, and comes standard with a foot switch (cable length: 1m). Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Winding capacity: High speed: 14.7kN, Low speed: 24.5kN ■ Winding speed: - High speed: 6.4 to 3.5m/min - Low speed: 3.7 to 2.0m/min ■ Power supply: AC100V 50/60Hz ■ Output: 750W *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

We would like to introduce our cable winch, the 'CW-1000C', which features high speed, low noise, and stepless speed variation. The winding speed ranges from 5.5 to 29.7 m/min (at 50Hz), with the capability for forward and reverse rotation, and it includes an instant brake mechanism. Additionally, a foot switch (cord length: 2m) is included as a standard accessory. Please feel free to contact us when you need assistance. 【Specifications (partial)】 ■ Winding capacity: 9.8 kN ■ Winding speed - 50Hz: 5.5 to 29.7 m/min - 60Hz: 6.5 to 36.6 m/min ■ Power supply: AC100V 50/60Hz ■ Output: 750W *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

We would like to introduce our cable winch, the 'CW-1500C', which features high speed, low noise, and stepless speed variation. The winding speed ranges from 3.5 to 19.2 m/min (at 50Hz), with forward and reverse operation possible, and it includes an instant brake mechanism. Additionally, a foot switch (cable length: 2m) is included as a standard accessory. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Winding capacity: 14.7 kN ■ Winding speed - 50Hz: 3.5 to 19.2 m/min - 60Hz: 4.3 to 23.5 m/min ■ Power supply: AC100V 50/60Hz ■ Output: 750W *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

We offer the compact and lightweight mini winch 'CW-M500S'. This product features an instantaneous brake mechanism to prevent accidents caused by drum reversal, and it achieves efficient motor characteristics. Considering the use of steel wire, we have adopted cast iron for the drum. It comes with an ammeter, making it convenient for tension control as you can check the load. 【Features】 ■ Bidirectional operation with instantaneous brake mechanism ■ Achieves efficient motor characteristics ■ Compact and lightweight design allows installation in narrow spaces such as cable racks ■ Base can be removed for anchor installation ■ Stops the motor during overload to prevent tension overrun *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "CW-IV400" is an inverter winch with a pulling speed of 0.8 to 17.0 m/min. It features inverter control, providing a quiet work environment that is easy to communicate in via phone or radio. It has a maximum pulling force of 4.3 kN and includes a pulling speed display function that allows for work time predictions. Additionally, it is suitable for use in conjunction with the cable intermediate feeder "Power Ball." 【Specifications (partial)】 ■ Pulling force: 4.3 kN (MAX) ■ Pulling speed: 0.8 to 17.0 m/min ■ Power supply: AC100V 50/60Hz ■ Output: 400W ■ Dimensions: W500×L411×H269mm *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "CW-IV3500S" is an inverter winch with a maximum winding capacity of 34.3kN (3500kgf). The winding speed ranges from 2.0 to 19.4m/min, and it allows for forward and reverse operation as well as speed changes. Additionally, a tail hold device, drum cover, and foot switch (cord length: 2m) are included as standard accessories. Please feel free to contact us if you have any inquiries. 【Specifications (partial)】 ■ Winding capacity: Maximum 34.3kN (3500kgf) ■ Winding speed: 2.0 to 19.4m/min ■ Power supply: Three-phase 200V 50/60Hz ■ Output: 3.7kW ■ Dimensions: W584×L1144×H522mm *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "ISK-PB203M (Power Ball Mini)" is a cable intermediate feeding machine with inverter control linkage. It is suitable for narrow installation routes and tight spacing between multi-tier racks. The power supply is three-phase 200V, and it has a maximum feeding force of 1.96kN (200kgf) ±10%. Please feel free to contact us when you need assistance. Note that "Power Ball" is a registered trademark of Ikura Seiki Co., Ltd. 【Specifications (partial)】 ■ Power supply: Three-phase 200V ■ Output: 200W ■ Feeding force: Maximum 1.96kN (200kgf) ±10% ■ Feeding speed: 4.2 to 20m/min ■ Applicable cable diameter: φ1 to 65 ■ Base dimensions: W380 × L286mm *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "ISK-PB203 (Power Ball)" is a cable intermediate feeding device linked with inverter control. It is effective for long-distance lines with many bends. It is used in conjunction with a winch to improve the efficiency of line work. Additionally, the power supply is three-phase 200V, with a maximum feeding force of 1.96kN (200kgf) ±10%. Please note that "Power Ball" is a registered trademark of Ikura Seiki Co., Ltd. 【Specifications (partial)】 ■ Power supply: Three-phase 200V ■ Output: 200W ■ Feeding force: Maximum 1.96kN (200kgf) ±10% ■ Feeding speed: 3.7–20m/min ■ Applicable cable diameter: φ1–100 ■ Base dimensions: W334×L400mm *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "ISK-PB180 (Power Ball)" is a cable feeding machine with a maximum feeding force of 1.76kN (180kgf). It is a continuously variable model that can be easily used with 100V and does not require an inverter box. The feeding speed ranges from 3.7 to 16.1m/min at 50Hz and from 4.4 to 19.3m/min at 60Hz. Please feel free to contact us if you have any inquiries. Note that "Power Ball" is a registered trademark of Ikura Seiki Co., Ltd. 【Specifications (partial)】 ■ Applicable cable diameter: φ1 to 100 ■ Base dimensions: W346 × L530mm ■ Input cable: 3m ■ Hand switch input: 4m ■ External dimensions: W384 × L580 × H258mm ■ Accessories: Ratchet wrench, air pump *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "ISK-PB403 (Power Ball Four Balls)" is a cable intermediate feeding machine with inverter-controlled linkage, featuring a feeding force of up to 3.92 kN (400 kgf) ±5%. It easily feeds thick cables with high grip strength. Additionally, it contributes to the efficiency of line extension work when used in conjunction with a winch. Please feel free to contact us if you need assistance. Note that "Power Ball" is a registered trademark of Ikura Seiki Co., Ltd. 【Specifications (partial)】 ■ Power supply: Three-phase 200V ■ Output: 400W ■ Feeding force: Maximum 3.92 kN (400 kgf) ±5% ■ Feeding speed: 4.9 to 27 m/min ■ Applicable cable diameter: φ1 to 100 ■ Base dimensions: W343 × L620 mm *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "ISK-WG1585" is a wedge grip with a grip surface length of 300mm. It can accommodate cable diameters from φ15 to 85mm with a consistent gripping force, regardless of the thickness of the wire. Additionally, it enables labor-saving and safe operations. Please feel free to contact us when you need assistance. 【Specifications】 ■ Maximum safe load: 2.94kN (300kgf) ■ Grip surface length: 300mm ■ Applicable cable diameter: φ15 to 85mm ■ External dimensions: W190×L400×H470–520mm ■ Weight: 17.5kg *For more details, please refer to the PDF document or feel free to contact us.

• Transport machinery

The "Cable Master ISK-DK325CV" is a wire stripping machine suitable for the tedious task of stripping waste wires. It features a splitting device that widens the cut for easier insulation removal, and a roller guide for smooth feeding. This versatile and high-power product excels at stripping even twisted wires with ease. 【Features】 - Separates VVF wires (2-core, 3-core / φ1.6, φ2.0, φ2.6) in one go - Equipped with a safety guard - Splitting device that widens the cut for easier insulation removal - Smooth feeding with roller guide - Works well with twisted wires *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Cable Master Mini ISK-DK150" is a wire stripping machine characterized by its compact size, lightweight, and quiet operation. It is ideal for the tedious task of stripping waste wires. It uses a rotating cutting blade to make incisions and expand them, providing exceptional ease of stripping. Additionally, it comes with a safety guard and is compatible with CV wires and VVF (VA) wires. 【Features】 ■ Compact, lightweight, and quiet ■ Equipped with a safety guard ■ Opening device that expands the incision for easier stripping of insulation ■ Provides outstanding ease of stripping *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Mycon Mini Mini IS-CM36" is an ultra-compact conjet machine. It has a capacity of C19 to 39 and PF16 to 36. The dimensions are W290 × L250 × H280 mm. Included as standard are 2L of cutting oil, one die head, and two sets of blades (replacement blades) PF16×22 and PF28×36. 【Specifications】 ■ Capacity: C19 to 39, PF16 to 36 ■ Motor: AC100V 50/60Hz ■ Output: 300W ■ External dimensions: W290 × L250 × H280 mm ■ Weight: 18kg *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Mycon 82 IS-CM82" is a compact, high-performance conjet machine. It has a capacity of C19 to 75 and PF16 to 82. The dimensions are W640×L460×H350mm. It outputs at high speed: 610W and low speed: 750W, and comes standard with cutting oil, die heads, and chasers (replacement blades). 【Specifications】 ■ Capacity: C19 to 75, PF16 to 82 ■ Motor: AC100V 50/60Hz ■ Output ・ High speed: 610W ・ Low speed: 750W ■ External dimensions: W640×L460×H350mm ■ Weight: 38kg *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

The "Mycon 104 IS-CM104" is a compact, high-performance conjet machine. It has a capacity of C19 to 75 and PF16 to 104. The dimensions are W680 × L460 × H390 mm. It comes standard with cutting oil, three die heads, and five sets of blades. 【Specifications】 ■ Capacity: C19 to 75, PF16 to 104 ■ Motor: AC100V 50/60Hz ■ Output ・ High speed: 610W ・ Low speed: 750W ■ External dimensions: W680 × L460 × H390 mm ■ Weight: 45kg *For more details, please refer to the PDF document or feel free to contact us.

• Work tools

Introducing the "IS-4W/IS-4WH." These are four-wheel casters used for corners and launch areas. The safe maximum load is 6.8kN for the "IS-4W" and 17.6kN for the "IS-4WH." To prevent deformation or damage, the attachment points of the lifting hardware are designed to move freely. Please use them at angles greater than 120 degrees and below the maximum allowable load. 【Specifications】 ■IS-4W 　・Safe maximum load: 6.8kN 　・Weight: 4.5kg ■IS-4WH 　・Safe maximum load: 17.6kN 　・Weight: 7.8kg *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

Introducing the ISK-3WH. This is a triple pulley with a maximum safe load of 1.96kN. It has a mass of 1.8kg, and the arm can be easily opened with a lever. 【Specifications】 ■ Maximum safe load: 1.96kN ■ Mass: 1.8kg *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce the seesaw cable rollers used at each bend of the cable extension construction. Starting with the "ISK-CB300," which enhances work efficiency with its open-close feature, we also have the "IS-CBII," where the rollers rotate independently left and right, ensuring uniform contact regardless of cable diameter, and the "ISK-CBM300," which makes handhole work easy. They can be disassembled for easy transportation. 【Product Lineup】 ■ISK-CB300 ■IS-CBII ■ISK-CBM300 *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "IS-3W65/IS-3W85" is a multipurpose cart that features rollers with bearings. It has a one-touch open and close mechanism, making it extremely user-friendly. The gaps between the rollers are minimal, preventing cables from coming loose. Additionally, it comes standard with hooks, and the "IS-3W85" allows for additional hooks to be added. 【Features】 ■ One-touch open and close mechanism for exceptional usability ■ Rollers with bearings ■ Minimal gaps between rollers prevent cables from coming loose ■ Standard hooks included (additional hooks can be added for IS-3W85) *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "ISK-CR430" is a stackable wire reel. It has outlets on both sides, making it easy to set up. You can pull it out from the inside without tearing the plastic. It is suitable for storing and pulling out bundles of wires. 【Features】 ■ Stackable ■ Easy to set up with outlets on both sides ■ Can be pulled out from the inside without tearing the plastic ■ Suitable for storing and pulling out bundles of wires *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

Yukiryo Seiki Co., Ltd. handles hanging metal wheels. We offer a lineup including the 0.75kg "IS-OW1," the 0.85kg "ISK-OW2S," and "IS-OW2." The arm can be easily opened with a lever and locks when closed. It features paired rollers. 【Lineup】 ■IS-OW1 ■ISK-OW2S ■IS-OW2 ■ISK-OW3 *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

Yukiryo Seiki Co., Ltd. handles the versatile roller 'KD-1800R'. It is suitable for various purposes such as cable racks, concrete U-shaped gutters, and metal ducts. The upright roller prevents cables from slipping out and allows for side insertion into multi-tier racks. Additionally, the upright roller can be easily tilted. 【Features】 ■ Compatible with various applications including metal ducts ■ Allows for side insertion into multi-tier racks ■ Upright roller can be easily tilted ■ Upright roller prevents cables from slipping out *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

Yukiryo Seiki Co., Ltd. handles corner rollers. We offer the "KD-325C" for in-corner use and the "KD-400C" for out-corner use. Additionally, we have a dedicated vice, the "KD-325CB," that allows for quick and reliable setup of corner rollers. 【Specifications (Maximum Safe Load)】 ■KD-325C (Weight: 6kg): 3.92kN ■KD-400C (Weight: 6kg): 3.92kN *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

The "KD-325S II" is an extension roller that allows for easy extension even when existing cables are present. It is designed to be usable even with 2-tier or 3-tier cable racks. Additionally, it can be reconfigured into three patterns, accommodating diameters from φ1 to 90. 【Specifications】 ■ Maximum safe load: 0.78kg ■ Weight: 2.4kg *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce our movable four-sided roller. It moves according to the swing range of the cable, making cable pulling operations safe and reliable even with a small number of people. It is stackable, easy to carry, space-saving, and allows for easy one-touch opening and closing with lever operation. 【Features】 ■ Moves according to the swing range of the cable ■ Safe and reliable cable pulling operations even with a small number of people ■ Stackable ■ Easy to carry and space-saving ■ Easy one-touch opening and closing with lever operation *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

Yukiryo Precision Machinery Co., Ltd. offers four-sided rollers. We have the one-touch opening and closing type "ISH-80" and the "ISH-110" with a vice for up to 50mm in our lineup. The "ISH-110" can be installed anywhere and can be tilted. 【Product Lineup】 ■ISH-80 ■ISH-110 *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

IYOSHIN Precision Machinery Co., Ltd. offers "rollers for racks." We have the "ISK-R1" and "ISK-R3," which can be easily installed and stabilized just by placing them on cable racks, as well as the "ISK-R2," which can be easily installed even with existing wires. Additionally, all products in the lineup are designed to save space. 【Product Lineup】 ■ISK-R1 ■ISK-R2 ■ISK-R3 *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

Ikuhara Seiki Co., Ltd. handles the single pipe roller 'ISK-TS300'. It features built-in pairing for smooth rotation. It adopts a three-stage adjustable locking pin system. 【Specifications】 ■Dimensions: φ80×L300mm ■Safety maximum load: 4.9kN ■Applicable pipe: single pipe outer diameter φ48.6 ■Weight: roller 3.1kg, guide 0.9kg (per unit) ■Standard accessories: 2 guides *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices

We would like to introduce the cable rollers handled by Ikuriyoshi Precision Machinery Co., Ltd. With built-in bearings, the cable feeding is smooth, and it uses sealed bearings to prevent water and dust from entering. The "IHL, IIH, S1H, S2H" models feature high side frames that make it difficult for cables to come off, while the "IIH, S2H" models allow for stackable storage. 【Product Lineup (Partial)】 ■ISS-I ■ISS-IR ■ISS-II ■ISS-IHL ■ISS-IIH *For more details, please refer to the PDF document or feel free to contact us.

• Wiring devices