テツタニ List of Products and Services

The "spectro2profiler" is an innovative surface measurement device designed to achieve uniformity in color and surface condition. It uses 45°/0° annular illumination for color measurement. The proven innovative LED technology by BYK ensures excellent performance. Additionally, multiple images are captured from different lighting directions to infer the surface curvature. Based on the curvature, a surface height map is calculated, and objective measurements of cell size and perceived cell amplitude are obtained using water shade analysis. 【Features】 ■ Measures color as seen ■ Measures texture and gloss as seen ■ New 3D - Texture analysis ■ From traditional gloss to 2D reflectance *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

This is a color observation standard light booth manufactured by BYK-Gardner in Germany. The way colors appear is greatly influenced by the surrounding light. In particular, differences in light sources and backgrounds can alter the impression of colors, leading to varying evaluation results. By using a light booth to visually inspect and verify samples, consistent evaluations can be achieved. The VicoSpectra series allows for easy switching between multiple light sources, enabling us to simulate various lighting conditions and provide an appropriate evaluation environment.

• others

The micro-gloss 60°XS is mainly used for measuring semi-gloss. With a measurement aperture of 6.2mm × 2mm and a small measurement spot of 4mm × 2mm, it is a gloss meter designed for measuring small parts. It complies with international standards, allowing for quick recognition of quality variations.

• Other measuring instruments

A new colorimeter capable of measuring color and glossiness with six angles. It enables quantitative measurement of brightness flop (metallic, aluminum, metallic-like) and color flop due to color changes (pearl mica), which could not be measured with single-angle colorimeters. Additionally, it achieves particle measurement of glossy materials that can only be done with the BYK-mac i. It is an ideal device not only for research and development purposes but also for manufacturing sites and quality control.

• Other measuring instruments

The micro-Tri-gloss μ can simultaneously measure both gloss at three angles (20°/60°/85°) and film thickness (Fe/NFe) with a single device. It enables quick recognition of quality fluctuations in accordance with international standards. 【Features】 ■ Simultaneous measurement of gloss at 20°/60°/85° ■ Equipped with dual sensor for film thickness Fe/NFe ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Features a color display ■ Automatic self-diagnosis with an internal calibration plate in the holder *For more details, please contact us or download the PDF.

• others

The Haze Meter "haze-gard i" is a haze meter that can measure total light transmittance and transmitted haze in accordance with multiple international standards with just one unit. Unlike incandescent bulbs and tungsten lamps, LED lamps provide stable long-term measurements and excellent reproducibility. It achieves consistent and stable data measurement that is not affected by continuous use or room temperature. Additionally, the light source comes with a 10-year warranty, reducing the hassle and cost of lamp replacement. 【Features】 ■ Complies with international standards and can simultaneously display different specifications (A/C/D65 light source) ■ 10-year warranty for long-term thermally stable LED lamp ■ High precision reproducibility and instrument error/digital standard ■ Small diameter attachment (optional) ■ Reliable domestic repair and calibration support *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments

The gloss meter "micro-Tri-gloss S" has improved accuracy with a very low gloss range of 0-20 GU at 60° gloss, with reproducibility of ±0.1 GU and instrument variation of ±0.2 GU. It is particularly effective for measurements on automotive interior parts. 【Features】 ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Equipped with a color display ■ Automatic self-diagnosis with a calibration plate in the holder *For more details, please contact us or download the PDF.

• Other measuring instruments

The micro-gloss 60°S has improved accuracy with a very low gloss range of 0-20 GU, with reproducibility of ±0.1 GU and instrument deviation of ±0.2 GU. It is particularly effective for measurements on automotive interior parts. 【Features】 ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Equipped with a color display ■ Automatic self-diagnosis with an internal calibration plate in the holder *For more details, please contact us or download the PDF.

• Other measuring instruments

The micro-gloss 45° is primarily used for gloss measurement in the ceramic and film industries. It allows for quick recognition of quality fluctuations in accordance with international standards. 【Features】 ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Equipped with a color display ■ Automatic self-diagnosis with a calibration plate inside the holder *For more details, please contact us or download the PDF.

• others

The micro-gloss 75° is mainly used for gloss measurement in the paper and vinyl siding industries. It allows for quick recognition of quality fluctuations in accordance with international standards. 【Features】 ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Equipped with a color display ■ Automatic self-diagnosis with a calibration plate inside the holder *For more details, please contact us or download the PDF.

• others

The micro-gloss 85° is primarily used for measuring low gloss. It is a gloss meter designed for measuring in the low gloss range, where changes in gloss are less noticeable with the commonly used 60° gloss meter. It allows for quick recognition of quality fluctuations in accordance with international standards. 【Features】 ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Equipped with a color display ■ Automatic self-diagnosis with an internal calibration plate in the holder *For more details, please contact us or download the PDF.

• others

The micro-gloss 60° is mainly used for measuring semi-gloss. It allows for quick recognition of quality variations in accordance with international standards. 【Features】 ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Equipped with a color display ■ Automatic self-diagnosis with an internal calibration plate in the holder *For more details, please contact us or download the PDF.

• others

The micro-gloss 20° is mainly used for measuring high gloss. It is a gloss meter designed for measuring in the high gloss range, where changes in gloss are less likely to be detected with the commonly used 60° gloss meter. It allows for quick recognition of quality fluctuations in accordance with international standards. 【Features】 ■ Uses LED as the light source, with a 10-year warranty on the light source ■ Equipped with a color display ■ Automatic self-diagnosis with an internal calibration plate in the holder *For more details, please contact us or download the PDF.

• others

The "micro wave-scan" is a compact model of a measurement device specialized for measuring the surface characteristics such as orange peel and DOI (Distinctness of Image) on high-gloss surfaces, particularly in narrow spaces and small parts. It can measure values from Wa to Wd. It features scroll wheel operation and a multilingual menu. Additionally, it has a design that is easy to hold with one hand and includes a statistical processing function with selectable memory storage. 【Features】 ■ Supports dullness up to <40, enabling measurement on high-gloss surfaces ■ Capable of measuring with narrow curvature ■ Can measure the smallest samples ■ Can measure from 0cm (du, Wa, Wb only) ■ Small measurement area: 4mm × scan length ■ Easy to hold with one hand *For more details, please refer to the PDF document or feel free to contact us.

• others

A stable operating process is key to achieving uniform and consistent quality. Therefore, it is necessary to routinely measure orange peel and DOI in the production process and share the measurement results with the raw material suppliers. The wave scan robotic system mounted on the robotic arm automatically performs appearance control. The robotic system ensures the same parts and high-frequency body measurements.

• others