西尾レントオール List of Products and Services

- Simultaneous measurement of dust quantity and weight distribution (PM1, PM2.5, PM4, PM10, and total amount) is possible. - Measurement data can be recorded in internal memory. - It is possible to combine with other devices through analog output and alarm output.

• Measurement and analysis equipment leasing and rental

- Concrete strength can be easily self-managed on-site. - Specimen dimensions: Φ100×H200mm - A transparent protective cover to prevent fragments from the specimen is included as standard. - The display has a running mode and a peak hold mode. - Zero point adjustment performed before testing is done in running mode. - The compression (failure) test is conducted in peak hold mode. - The pressurization speed of the manual hydraulic pump is set at approximately 5.0 kN/second. - At the time of specimen failure, the peak hold mode value will be the maximum load.

• Measurement and analysis equipment leasing and rental

- It detects the concrete filling condition and compaction status within the concrete formwork. - Areas with insufficient filling and the vibration status from the vibrator can be checked on the LCD screen. - The vibration devices (sensors) CIFD-3 and CIFD-4 can be used interchangeably.

• Measurement and analysis equipment leasing and rental

- Three exploration modes 1. Normal mode… Easier rebar detection. 2. Handle-less mode… Detectable even in narrow spaces. 3. Extension mode… Improved work efficiency during detection. - Instant transfer of detection results via smartphone communication features. - Rebar location indicated by buzzer and LED. - Depth scale displayed up to 600mm. (When dielectric constant is set to "8.0") - Detection results can be displayed up to a maximum of 6m. - Smooth detection without distance limitations.

• Measurement and analysis equipment leasing and rental

- It is used for measuring the dew point temperature of dry air in manufacturing lines and other applications. - Two probes with different measurement ranges are included as standard configuration. - The transfer cable to a computer and dedicated software are optional items.

• Measurement and analysis equipment leasing and rental

- It is a vibration type that evaluates vibration pollution and working environments based on human vibration sensitivity. - Measurement data is recorded on a memory card (SD card). - It is compatible with memory cards (SD cards) and can save measurement data. - The function expansion program VX-55EX is already installed. - It complies with the standards of JIS C 1510:1995, JIS C 1517:2014, and the new standards that came into effect on November 1, 2015.

• Measurement and analysis equipment leasing and rental

- It is a sensor-type temperature and humidity logger. - The connection to the PC is via a USB cable.

• Measurement and analysis equipment leasing and rental

- It is a compact 4-channel data recorder that can capture sound and vibration waveforms on-site. - Data is recorded in WAVE format on a CF card and can be played back as an analog signal. - It has a voice input memo function. - There are no moving parts like in traditional pen recorders, and it operates silently. - Estimated usage time when connected to a noise meter (with a 2GB CF card): - One unit: approximately 5 hours and 20 minutes - Two units: 2 hours and 40 minutes - Four units: 1 hour and 20 minutes

• Measurement and analysis equipment leasing and rental

- No license or qualification is required. - The recommended usage distance is approximately 100 meters radius from the main unit antenna. - By connecting two main units, a maximum of 9 people can communicate simultaneously in a 1-to-8 configuration. It is ideal for large group tasks such as shared lifting.

• Measurement and analysis equipment leasing and rental

- It is a lightweight handheld surface thermometer that measures without contact. - Two red laser points appear outside the measurement field, ensuring accurate targeting of the measurement area. (Patent) - It features an auto power-off function (approximately 15 seconds). - The emissivity can be adjusted, allowing for the measurement of surface temperatures of various objects.

• Measurement and analysis equipment leasing and rental

- Measures the salt content adhering to the surfaces of steel structures such as bridges and large tanks. - Increases the reliability of cleanliness before painting through measurements with this device. - The measurement cell (sensor part) is fixed with a magnet, so the measurement location must be a flat magnetic material. - Injects pure water with the included syringe and measures the concentration of salt that has dissolved in the pure water. - Approximately 10 mL of pure water is required for a single measurement. Please consult us if you need pure water.

• Measurement and analysis equipment leasing and rental

- This is a measuring device that records AC current values (load current such as for motors) at 50Hz/60Hz. - This device can connect two sensors and can record the measurement values of each sensor individually at the same time. - Measurement data can be transferred to a computer via a USB cable and can be graphed using the included analysis software. - Two clamp sensors (CT6500) are included as standard. They cannot be used as power meter sensors. - By connecting a leakage clamp sensor (9675/optional), leakage current can also be measured and recorded. - You can connect one clamp sensor and one leakage clamp sensor, or two of either type of sensor. - The LCD screen displays the current values of two channels simultaneously. - There are two recording modes: instantaneous value recording mode and statistical value recording mode. - The statistical value recording mode measures at one-second intervals and records the instantaneous value, maximum value, minimum value, and average value for each second. - Standard components include: Logger LR5051 main unit x1, Clamp sensor CT6500 x2, Communication adapter LR5091/USB cable x1, Dedicated software CD x1, Spare AA batteries x2, Instruction manual x1.

• Measurement and analysis equipment leasing and rental

Easy-to-read scale markings

• Measurement and analysis equipment leasing and rental

- Measure the ground (earth) resistance value. - This is not an insulation resistance meter for measuring insulation of submersible pumps or power tools. - It is a measuring device for the potential drop method, using two auxiliary grounding rods buried in the ground. - A maximum AC voltage of 50V will be generated during measurement, so please be careful not to touch the terminals.

• Measurement and analysis equipment leasing and rental

- It digitally displays the relative concentration of suspended dust. - It is used for measuring occupational health and working environment at construction sites. - By inputting the mass concentration conversion count (K value) in advance and pressing the conversion switch, the mass concentration can be displayed. - It has a data logger function, allowing data to be transferred to a computer using a cable with software. - The certification from the Japan Association for Working Environment Measurement (JAWEM) will be obtained after receiving your order.

• Measurement and analysis equipment leasing and rental

- Ideal for long-term measurement - Compact outdoor installation type - Usable in various situations for drainage and water supply We propose an optimal system with high expandability - Rotating light alarm system (notifies abnormalities with sound and light) - Email notification system (notifies abnormalities via email) - Cloud system (remote monitoring and recording via the cloud)

• Measurement and analysis equipment leasing and rental

- Ideal for long-term measurement - Compact outdoor installation type - Usable in various situations for drainage and water supply We propose an optimal system with high expandability - Rotating light alarm system (alerts abnormalities with sound and light) - Email notification system (alerts abnormalities via email) - Cloud system (remote monitoring and recording via the cloud)

• Measurement and analysis equipment leasing and rental

- This is a safety assistance device that uses IC tags to identify workers, heavy machinery, and vehicles that enter the monitoring area for heavy machinery operators and issues alarms. - The alarm can distinguish between people, heavy machinery, and vehicles through a three-color signal light and different sound tones. - Up to 100 IC tags can be identified. - The IC tag settings are configured by connecting this device to a PC with dedicated software installed. - The alarm area is approximately 10 meters by default, but it can be shortened by 15-30% using an attenuator. - Two external antennas can be connected (typically installed at the rear and in blind spots). - The power supply is designed to be plugged into the cigarette socket of the driver's seat (compatible with 12V and 24V vehicles). - This product is registered with NETIS. 【 KT-130008-A 】 Technical name: Wireless Heavy Machinery Proximity Alarm Device "HESAR".

• Measurement and analysis equipment leasing and rental

- This is a basic type pH meter. - It does not have connections for PC or printer, nor interval measurement functions.

• Measurement and analysis equipment leasing and rental

- It is a detector specifically for ammonia gas, measuring from low to high concentrations. - The L range and H range switch automatically (fixed range is also possible). - Turn on the power and allow clean air to be drawn in for air adjustment (zero adjustment). - Air adjustment is performed automatically, and the displayed value will be 0 ppm. - Solid foreign substances are removed by the drain filter at the base of the suction pipe. - The display shows concentration (ppm) with a digital bar graph and numbers. - It has a convenient peak hold function and a backlight feature. - After measurements are completed, please draw in clean air and turn off the power while the measured concentration is low.

• Measurement and analysis equipment leasing and rental

- It is ideal for measuring to prevent oxygen deficiency. - An alarm buzzer will activate at a concentration of 18% or lower. - It has an alarm for low battery voltage, which notifies you in advance when it's time to replace the battery. - The sensor can be lowered through the opening of a manhole or tank to measure the internal oxygen concentration, ensuring it is above the specified level before entry. - The sensor part must not get wet, so please be careful not to immerse it in internal water pools when lowering it through the opening. - The standard length of the sensor cable is 5 meters. Optional cables of 10 meters and 20 meters are available.

• Measurement and analysis equipment leasing and rental

- This is a lightning detector used to prevent lightning accidents at outdoor construction sites and similar locations. - It is used to determine the timing for evacuation based on the distance to the lightning. - The distance to the lightning is displayed in 1 km increments from 0 to 15 km. - There is a function that indicates when the battery needs to be replaced (displayed as E). - This device does not have waterproof or splash-proof features. Please use caution when using it in the rain.

• Measurement and analysis equipment leasing and rental

- It is a measuring device that integrates distance measurement and angle measurement (horizontal and vertical) functions. - By sequentially memorizing change points and corners of structures, it converts data into three-dimensional format. - The locations to be memorized are displayed on the controller with an 8x zoom image. - By measuring points in order that you want to digitize indoors, three-dimensional data can be created. - There is a function to move the main unit for measurement and overlay data before and after the movement. ☆ Measurement accuracy: 1mm at a distance of 10m ☆ The main unit and controller are connected via Wi-Fi ☆ Built-in 8x zoom camera allows for accurate confirmation of measurement targets even at long distances ☆ The main unit can be placed on a table or floor for use ☆ The touch panel controller is easy to operate for anyone.

• Measurement and analysis equipment leasing and rental

- This is a warning assistance device that alerts the operator with sound and the workers with sound and vibration when heavy machinery approaches from behind the workers. - It is a NETIS registered product. [Registration No. KT-090057-VE] - A monitoring sensor is installed at the rear of the heavy machinery, and a warning buzzer is placed near the operator. (Magnet type) - The detection distance of the monitoring sensor can be switched; it is set to 10m when the heavy machinery is moving fast and 5m when it is moving slowly. - The monitoring sensor should be installed horizontally, at a height of 1.2 to 1.7 meters above the ground. - The monitoring sensor and warning buzzer are designed with a magnet for easy attachment and detachment. - Workers will attach a helmet sensor to the back of their helmets. (Rubber belt type) - The sensor attached to the back of the helmet does not detect within an approximate 120° range in front. - The monitoring sensor and helmet sensor are rechargeable. - Please specify the quantity of helmet sensors when placing an order.

• Measurement and analysis equipment leasing and rental

- This is a proximity detection and alarm system designed to prevent contact accidents with heavy machinery. - It uses two wide-angle area sensors to assist in blind spots during operations such as backhoe turning. - It is a NETIS registered product [Registration No. TS-020002-V] with the technical name: Proximity detection and alarm system for construction machinery and surrounding workers using ultrasonic communication. Subtitle: Ultrasonic transmission and reception device "Tora Ponta" with mutual danger recognition type using transponder method. - The heavy machinery is equipped with two area sensors that emit ultrasonic signals and an alarm device. - The area sensors and alarm device are designed with magnets for easy attachment and detachment. - The power supply for the area sensors and alarm device is connected to the cigarette socket in the driver's seat (compatible with 12V and 24V vehicles). - The response sensor-equipped reflective vest (responder) is worn by the worker, and the dry battery power is turned ON. - Areas away from the heavy machinery are designated as danger prediction areas, where only the responder emits an alarm sound. - Areas close to the heavy machinery are designated as danger areas, where both the responder and the heavy machinery alarm device (red flashing light and alarm sound) are activated. - The range of danger prediction areas and danger areas can be changed by switching the back panel switch of the heavy machinery alarm device.

• Construction machinery leasing and rental
• Measurement and analysis equipment leasing and rental

- This is an industrial endoscope with a tip diameter of Φ6.9mm that can be operated 360 degrees. - The camera direction is controlled using a joystick at hand. - It uses a metal blade that excels in insertion capability. We offer blade lengths of 3m and 5m (prices vary). - The high-brightness LED light at the tip has a 5-level dimming function. - To prevent camera failure due to high temperatures, a temperature warning is displayed on the monitor. - You can record videos and still images on a microSD card inserted into the main unit. Flash photography is possible for still images only. - The area between the CCD camera and the insertion part can be used submerged in water, 3.5% saline solution, diesel, kerosene, etc., under normal temperature and pressure conditions.

• Non-destructive testing
• Measurement and analysis equipment leasing and rental

- This is a measuring device used to measure the moisture content of concrete before the waterproof layer is applied to the concrete slab. - The sensor part is pressed directly against the surface of the concrete for measurement. - It displays the moisture content (%) of the concrete slab surface and the count value (electrical resistance equivalent value). - It has been confirmed that adopting an electrical resistance measurement principle and using conductive rubber at the sensor tip improves accuracy even on uneven surfaces. * * Verified through demonstration experiments conducted by the Japan Construction Machinery Contractors Association's Construction Technology Research Institute (CMI).

• Measurement and analysis equipment leasing and rental

- This is a checker designed for the construction management of permeable concrete protective materials. - It is a product that complies with the "Application Discrimination Method for Permeable Concrete Protective Materials (Draft)" by the Civil Engineering Research Institute.

• Measurement and analysis equipment leasing and rental

- This is a paint-through type thickness gauge that allows for the measurement of substrate thickness without removing coatings such as paint. - It features a backlit LCD, enabling measurements in dark environments. - There is no data storage function. - The display mode can be changed according to the measurement purpose. - 1. Standard mode displayed for each measurement, 2. Display mode for minimum or maximum values during continuous measurement, 3. Mode that shows the difference from the input value (in mm or %), 4. B-scope mode that displays minimum/maximum values during measurement, 5. Dual multi-mode that displays only the substrate thickness over the coating.

• Other measuring instruments
• Measurement and analysis equipment leasing and rental

■ Wiring the sensors is difficult. ■ The concrete pouring locations are far apart. ■ It's hard to go collect the data. In such cases, a wireless temperature data logger is recommended.

• Measurement and analysis equipment leasing and rental

- Temperature sensor N-231E-00-1-TC1-ASP for stationary surfaces included - Handheld type thermometer - Response to rapid changes in room temperature - Use of thermocouple of the same metal for the input section - Integration of reference contact and reference contact protection device - Large display for easy visibility - Ease of use with one key for one function

• Measurement and analysis equipment leasing and rental

- It is a handy size that can be held with one hand. The printer is external. - It is used for measuring surface roughness before painting, such as after blasting treatment. - It is equipped with a 2.4-inch color graphic LCD with good visibility, and the backlight enhances visibility. - When the cumulative measurement distance exceeds the preset "threshold," an alarm display will notify you. - It can display not only measurement results but also evaluation curves, load curves, and amplitude distribution curves. - You only need to select the required parameters from the screen. Additionally, setting tolerances can be easily done from the submenu.

• Measurement and analysis equipment leasing and rental

- It is a handy illuminance meter that can be easily measured. - The measurement range can be switched between auto and manual. - Pressing the HOLD key turns on the backlight and allows you to freeze the displayed value. - It has not undergone measurement certification.

• Measurement and analysis equipment leasing and rental

- It is a thickness gauge for measuring thick materials from 0 to 20mm. - It is used for measuring the thickness of linings on magnetic metal substrates such as iron and steel. - It features an easy-to-understand Japanese guide display. - It does not have measurement memory functions or connectivity features with a PC.

• Measurement and analysis equipment leasing and rental

- It automatically distinguishes between measuring base metals (ferrous and non-ferrous) with a single sensor. - It features an easy-to-understand Japanese language guide display. - There are no measurement memory functions or connection functions with a PC.

• Measurement and analysis equipment leasing and rental

- The design strength of the anchor bolts can be easily checked on-site. - Since it can be held with one hand, strength inspections of high places, ceilings, walls, and floors can be performed by one person. - The anchor displacement (mm) is read using a protractor to measure the angle, and an approximate value is calculated.

• Measurement and analysis equipment leasing and rental

● It is a dual-frequency system that simultaneously transmits two frequencies: 300MHz (low frequency) and 800MHz (high frequency). ● It is a digital system that incorporates a radar board, communication functions, and a battery within the antenna unit, allowing data collection using a notebook PC connected via a LAN cable. As a result, the data has become clearer. ● The controller has the capability to display data collected at each frequency and to utilize the characteristics of both high and low frequencies to display both sets of data on a single screen, making it much easier to make judgments. ● It is compact and lightweight.

• Measurement and analysis equipment leasing and rental

- It features an easy-to-use focus-free function and an automatic temperature scale function. - It is equipped with the MSX function that mixes thermal images and visible images. - The surface temperature of the cross spot on the LCD screen is displayed in the upper right corner of the LCD. - It can store a total of approximately 500 thermal and visible images in the device's memory. - The stored images can be transferred to a computer via a USB cable.

• Measurement and analysis equipment leasing and rental

● The position and cover thickness of rebar can be quickly understood through standalone scanning. ● The position, number, cover thickness, and diameter of rebar can be analyzed in detail on the monitor. ● By using PC software (included accessories), the average cover thickness and standard deviation within the scanning area can be calculated, and a report can be generated that includes both the rebar layout and cover thickness.

• Measurement and analysis equipment leasing and rental

- It is a precision-grade sound level meter that measures a wide frequency range from 1 to 20,000 Hz. - Measurement data can be recorded on a memory card (SD). - Menu display in Japanese. - Easy operation following the guidance on the screen. - Large color LCD screen.

• Measurement and analysis equipment leasing and rental

By using a camera and GPS mounted on a drone (UAV) along with analysis software, it is possible to create three-dimensional shape data. This data can be utilized for volume calculations, creating longitudinal and cross-sectional shapes, and landscape simulations, among other applications.

• Surveying
• Distance measuring device/length measuring device
• Measurement and analysis equipment leasing and rental

When a worker carrying an RFID tag approaches the ID guard alarm system, it alerts the operator with a buzzer and rotating light. The detection range between the alarm system and the RFID tag is up to 20 meters. The alarm area can be set in two stages.

• Safety and consumables
• Crane and others
• Construction machinery leasing and rental

Collect various weather information such as wind speed, wind direction, temperature, humidity, heatstroke, and rainfall all in one device. The observation data is sent to the server at one-minute intervals and can be easily viewed anytime on a computer or smartphone. In case of abnormal values being observed, notifications will be sent to the registered email address.

• Equipment leasing and rental
• Weather Survey
• Other measuring instruments

Nishio Rent All Co., Ltd. has significantly expanded its range of operations, covering everything from construction equipment, including furniture and fixtures, to precision instruments represented by surveying and measuring equipment, as well as communication and video equipment. The company develops original devices that consider safety and the environment, and information-based construction systems that leverage its expertise. It has made substantial contributions to resource conservation and cost reduction through various structural materials and tents used in numerous events and exhibitions. The comprehensive rental catalog (digest) for surveying instruments, measuring devices, and communication safety equipment includes many items such as "surveying instruments" like optical and laser surveying equipment, "measuring devices" like noise and vibration meters and water quality meters, and "communication safety equipment" like radios, crane radios, wireless amplifiers, and broadcasting equipment. 【Featured Products】 ○ Surveying Instruments ○ Measuring Devices ○ Communication Safety Equipment ○ Others For more details, please contact us or download the catalog. *This catalog is a digest version.

• Surveying
• Measurement and analysis equipment leasing and rental

- This is a testing machine that applies the tensile load to be verified and conducts a confirmation test on the anchor bolts. - It simultaneously displays and records the load and displacement on a liquid crystal screen.

• Equipment leasing and rental