ネクストリー List of Products and Services

1. High effectiveness and safety Since it is a product based on calcium hydroxide, it does not fall under the category of toxic or hazardous substances. Additionally, it exhibits equivalent effectiveness with about half the amount of caustic soda (25%) that is commonly used. 2. Stable pricing Because the main raw materials are natural resources that can be supplied domestically, we can offer stable prices without being affected by market fluctuations.

• Mural
• Plastering and painting work

We would like to introduce a case study of the implementation of "Aqua Nature Plus" and "Aqua Blaster" at a metal processing factory. The challenge was that the compounds used for barrel polishing contained organic substances that increased BOD and COD, making it impossible to meet the internal standards for BOD and COD with the current treatment method (coagulation treatment). After implementation, the number of chemicals used was reduced from five to two, significantly decreasing the effort required for chemical replenishment and adjustment work. BOD and COD levels also dropped to below 30 mg/L, clearing the internal standards. [Case Overview (Partial)] ■ Challenges - Reduce BOD and COD, which exceed internal standards, to below the internal standard values. - Simplify the adjustment of coagulation issues as much as possible during trouble occurrences. ■ Results - Reduced running costs by over 4 million yen annually, bringing them down to about 50% of pre-implementation levels. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the implementation of the "Aqua Nature Plus, AN-1000 model" at a bag manufacturing processing plant. Originally, natural sedimentation was performed in four water tanks located in an underground pit, but with the increase in production volume, the drainage volume increased, leading to a shorter retention time in the tanks, which resulted in having to discharge water while it was still cloudy. After the implementation, the only tasks required for wastewater treatment were the addition of chemicals and the replacement of filter bags, creating an environment where wastewater treatment could be completed in a short time. [Case Overview (Partial)] ■ Challenges - The existing sedimentation equipment was insufficient for adequate solid-liquid separation. - Due to the limited space for equipment installation, a device that fits in that area was needed. - Running costs needed to be minimized as much as possible. ■ Results - By performing coagulation treatment, it became possible to discharge clear water.

• Water Treatment

We would like to introduce a case where the "Aqua Nature AL, AN-1000 model" was implemented at a cardboard manufacturing factory. Due to the aging of the wastewater treatment equipment, an upgrade was necessary, but we wanted to keep costs as low as possible while also making the installation space as compact as possible, and we aimed to reduce running costs as well. After implementation, the need for quicklime and dewatering materials was eliminated, resulting in a significant reduction in sludge volume and a decrease in waste disposal costs. 【Case Overview (Partial)】 ■Challenges - Update the wastewater treatment equipment due to aging while keeping costs down - Reduce the number of chemicals used to lessen the workload ■Results - The capital investment was about one-third of the cost when the existing equipment was installed - The number of chemicals used was reduced from five to one, lowering chemical costs and workload *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the introduction of "coagulants for fluorine treatment" in the metal processing industry. In the existing wastewater treatment system, fluorine treatment was performed using a single-stage coagulation process with lime, but the fluorine concentration in the treated water could not reach the target value, and it was diluted with well water before being discharged. After the introduction, by adjusting the inflow of concentrated and diluted wastewater, the concentration of the raw water became constant, allowing for consistently stable coagulation and fluorine treatment. [Case Overview (Partial)] ■ Issues - The existing wastewater treatment equipment could not reduce fluorine to the target value. - There was variability in the raw water concentration, leading to unstable wastewater treatment. ■ Results - The fluorine concentration was successfully reduced to the target value. - Due to the reduction effect of fluorine and stable treatment effectiveness, it became possible to discharge without dilution. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the introduction of "Aqua Nature HR, QCL-EB/1000 type" at a water-based paint manufacturing factory. We wanted to carry out wastewater treatment without much hassle, so we aimed for a simple treatment with a single agent and to minimize the effort required for wastewater treatment operations. After the introduction, we were able to treat the wastewater easily with just one type of chemical. 【Case Overview (Partial)】 ■Challenges - We wanted to perform treatment with a single agent and create a process that could be easily adjusted. - We did not want to use toxic substances. - We aimed to keep the initial costs down by using as inexpensive equipment as possible. ■Results - There was no use of toxic substances, and we were able to treat the wastewater safely. - We were able to introduce the wastewater treatment system while significantly reducing initial costs. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case where "Aqua Nature, OSD-50-M1S" was implemented in the civil engineering industry. Due to muddy water flowing from the mountains to the rivers during rainy weather, we wanted to carry out some treatment before it flowed into the river and release clear water into the river. After the implementation, we were able to release clear water into the river by performing coagulation treatment, and by using a product with extremely high safety, we were able to contribute to the conservation of the river ecosystem. 【Case Overview (Partial)】 ■Challenges - We wanted to treat muddy water that flows out during rainy weather and release clear water. - We wanted to use a coagulating agent that is highly safe for the environment. ■Results - We were able to release clear water into the river by performing coagulation treatment. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study on the introduction of "Aqua Nature TR/pH Adjuster" in the metal product coating industry. When using circulating water in the painting booth, the water would decay and produce unpleasant odors, leading to a poor working environment. Additionally, regularly disposing of all the circulating water as industrial waste incurred significant costs. After the introduction, water quality analysis of the circulating water showed that it met the sewer discharge standards, allowing us to discharge the supernatant into the sewer and reduce the disposal costs for industrial waste by more than half. [Case Overview] ■ Challenges - We want to suppress the occurrence of unpleasant odors. - We want to reduce the disposal costs for industrial waste. ■ Effects - Even after six months, the circulating water was able to maintain a very clean state. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case where "Aqua Nature SV filtration basket and reusable filtration bags" were implemented for grease trap cleaning. When using powdered coagulants, there was a concern about dust scattering when used in the grease traps within the building. After implementation, the ease of using the coagulants reduced the burden on workers, and filtering during transportation lowered the waste disposal costs. 【Case Overview (Partial)】 ■Challenges - We want to improve the water quality after cleaning the grease traps. - We want to reduce the waste disposal costs for the collected sludge. ■Results - The treated water is clean, so there is no need to dispose of it as waste. - The ease of using the coagulants means it does not burden the workers. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the introduction of "fluorine reduction agents" in the metal surface treatment industry. During measurements with a fluorine ion concentration meter, the levels were within the standard values, but when analyzed, it was found to exceed the standards, which was a problem. After the introduction, the fluorine concentration in the treated water was reduced from 9.5 mg/L to 2.0 mg/L, and the only additional equipment required was a tank with a stirrer and a dosing pump that were kept as spares. 【Case Overview (Partial)】 ■Challenges - Fluorine complexes are present in the wastewater. - We want to achieve the target standard values by reviewing chemicals and treatment flow without making capital investments. ■Proposal - By introducing fluorine treatment agents, we examined the reduction effect of fluorine. - The target for total fluorine (Total-F) was set to below 8 ppm instead of free fluorine (Free-F). *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case where the "Compact Wastewater Treatment Device, Aqua Nature Plus" was implemented in the industrial waste treatment industry. A significant issue was the discharge of wastewater containing a large amount of oil during the cleaning of the packer trucks used for collection and transportation. After implementation, we were able to complete one batch treatment within 30 minutes by combining natural filtration methods with reusable filter bags, and we can now process 8 to 10 batches a day using a coagulation and sedimentation treatment device with a capacity of 1m3 per batch. [Challenges (partial)] - The presence of oil causes a decrease in pH. - It is costly to remove existing treatment devices, so we wanted to introduce a treatment device that makes the most of the existing equipment. - A large volume of wastewater is discharged in a short time, so we wanted to process it as quickly as possible. - We wanted to keep the implementation costs as low as possible. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case where the "Small Wastewater Treatment Device, Aqua Nature Plus" was implemented in the metal processing industry. The wastewater discharged from barrel polishing was all treated as industrial waste, which incurred significant costs. After implementation, the cost of industrial waste disposal was reduced to below 50% by performing coagulation and sedimentation treatment. 【Case Overview (Partial)】 ■Challenges - Due to the busy schedule of the manufacturing staff, there was not much time available for wastewater treatment. - To ensure safe operations, there was a desire to avoid using hazardous substances. ■Proposal - To reduce the labor and time required for operations, a semi-automatic small wastewater treatment device was introduced. - To cut down on industrial waste disposal costs, coagulation and sedimentation treatment was adopted, disposing only of the separated sludge. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the introduction of a "filtration treatment system" in the paper processing industry. In coagulation treatment, the flow becomes complicated, and the equipment becomes quite heavy, which leads to unstable processing as a problem. After the introduction, even considering the running costs associated with wastewater treatment, the monthly costs were reduced to less than half. 【Case Overview (Partial)】 ■Challenges - The cost of industrial waste treatment for wastewater generated at 1,000 liters per day and 20,000 liters per month is high. - Workers cannot spend much time on wastewater treatment. ■Results - The amount of industrial waste treatment was reduced from 1,000 liters per day to 100 liters. - The investment effect was recovered in 1 year and 6 months. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the introduction of a "continuous wastewater treatment system and chelating agents" in the glass processing industry. The issue was that the existing treatment methods could not process all the contained elements due to the presence of multiple metals and non-metals with different treatment methods. After the introduction, by switching to lower concentration chemicals, operators were able to work more safely than before. 【Case Summary (Partial)】 ■Proposal - A flow was established to treat concentrated wastewater that had previously been processed as industrial waste by mixing it with a certain amount of raw water. - The treatment equipment was designed to operate automatically for all processes except for the dewatering machine's opening work and chemical replenishment. ■Results - The annual cost of wastewater treatment, which was 1 million yen, was eliminated. - All elements were reduced to below water quality standards. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the implementation of "Aqua Nature SV" in the well drilling industry. The issue was that turbid water generated during the well drilling was being discharged untreated, and there was no space available at the construction site for the installation of wastewater treatment equipment. After the implementation, we were able to increase the retention time by changing the injection point of the coagulant, which allowed us to shorten the reaction time required for coagulation treatment. 【Case Overview (Partial)】 ■Problem - Turbid water generated during well drilling is being discharged untreated. - There is no space for the installation of wastewater treatment equipment at the construction site. - Due to the large volume of discharge in a short time, rapid coagulation and sedimentation are necessary. ■Results - The water quality of the treated water improved dramatically through coagulation treatment. - By forming large flocs, sedimentation became possible in a short time. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case of implementing "Aqua Nature Plus (PLS-ST01)" in the construction industry. The issues were the desire to process as simply and quickly as possible, and the reluctance to incur high costs for equipment such as turbidity treatment systems. After implementation, all target water quality standards were met, and by using a powdered one-component coagulant, processing became possible in a very short time and in a simplified manner. [Challenges] - High pH of raw water due to the presence of concrete, leading to a high likelihood of requiring multiple chemical treatments. - Falling below the target water quality standards (SS: below 25 mg/L, pH 6–8.5). - Desire for processing to be as simple and quick as possible. - Reluctance to incur high costs for equipment such as turbidity treatment systems. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case of implementing the "Small Wastewater Treatment Device, Aqua Nature AL (AL-ST01)" in the paper processing industry. The wastewater treatment equipment had aged significantly and was corroded, necessitating an update, while there was a desire to minimize equipment costs as much as possible. After implementation, by changing to a single-agent chemical and a filtration method, the total running costs, including sludge disposal fees, were reduced. [Challenges] - The wastewater treatment equipment had aged significantly and was corroded, necessitating an update. - There was a desire to minimize equipment costs as much as possible. - There was a need for easy and quick processing. - There was a desire to reduce total running costs, including chemical costs, sludge disposal fees, and other consumables. *For more details, please refer to the related links or feel free to contact us.*

• Water Treatment

We would like to introduce a case study of the implementation of "Assist-CA Aqua Nature TR" in a painting booth. The issue was that we could not feel the effectiveness of the killer agent because multiple coatings were performed in one booth. After the implementation, the efficiency of sludge recovery significantly increased. Initially, we were testing with only one unit, but now all four units are using the chemicals. 【Case Overview】 ■Challenges - We could not feel the effectiveness of the killer agent because multiple coatings were performed in one booth. - Specific odor issues in the booth. ■Proposal - Proposal of know-how for odor prevention through pH management and the pH adjuster "Assist CA." - Proposal of the booth-specific coagulant "Aqua Nature TR." *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the introduction of "Aqua Nature Plus (PLS-ST01)" in the construction industry. We wanted to minimize costs for the treatment equipment and avoid the use of hazardous substances. After the introduction, the use of caustic soda (hazardous substance) became unnecessary, and with just a notch tank, submersible pump, and piping materials, we were able to set up the equipment, significantly reducing the initial costs. [Challenges] ■ There is almost no space for equipment installation ■ We want to avoid the use of hazardous substances ■ We want to process as simply and quickly as possible ■ We want to minimize costs for the treatment equipment *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the implementation of "Assist-CA Aqua Nature TR" in the construction machinery painting industry. The issue was that we were relying on different contractors for the chemicals used in the painting booth, cleaning services, and industrial waste collection, which made management cumbersome. After the implementation, the solidification and adhesion of the paint resin were prevented, making the collection of sludge easier, reducing odors on-site, and improving the working environment. 【Proposal】 - We took on all responsibilities for chemicals, cleaning, and industrial waste, consolidating the management of the painting booth into a single point of contact. - By using chemicals (coagulants) to prevent the solidification of paint resin, we made it easy to collect sludge with a vacuum truck, and since the supernatant water can be discharged into the sewer, we significantly reduced the amount of industrial waste. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

We would like to introduce a case study of the introduction of "Assist-CA Aqua Nature TR" in the sheet metal processing and plastic processing industries. There was a problem with unpleasant odors in the washing booth and the adhesion of paint resins, which made cleaning time-consuming. After the introduction, we managed to reduce odors through pH management and made paint resins non-stick, which alleviated the burden of cleaning tasks. The improvements in odor and the ease of collecting aggregates that had been a concern were also achieved, leading to a reduction in the cleaning workload. [Challenges] - The unpleasant odor problem in the washing booth and the adhesion of paint resins, which made cleaning time-consuming. - Since we were conducting our own cleaning, we wanted to improve the working environment. - We would like to try if these issues can be resolved with just chemicals. *For more details, please refer to the related links or feel free to contact us.

• Water Treatment

Our company is engaged in the "treatment of the foul odor and sludge from the paint residue pond." We can eliminate the odor from the paint residue pond, reduce the viscosity of the sludge, and achieve volume reduction. We guarantee the prevention of foul odor generation. Additionally, we offer free rental of a poly drum testing machine. Please feel free to contact us when you need assistance. 【Effects】 ■ Prolongs the life of the circulating water in the residue pond ■ Significantly reduces cleaning costs ■ Eliminates the viscosity of the sludge ■ Almost completely removes foul odors ■ Reduces blockages in the line piping *For more details, please refer to the PDF document or feel free to contact us.

• Turbid water and muddy water treatment machines
• Water treatment technology and systems

Our company provides "kitchen wastewater treatment." Without using activated sludge or pressure flotation, we can discharge wastewater using only high-performance aeration pipes, the "Aqua Blaster," for aeration and bio-drip. This method does not produce the unique putrid odor associated with wastewater, and there is almost no need for tank cleaning. Please feel free to contact us when you need our services. 【Features】 ■ Treatment is performed to below wastewater discharge standards simply by aeration with the Aqua Blaster and bio-drip. ■ Does not produce the unique putrid odor associated with wastewater. ■ Anyone can manage operations since it does not use pressure flotation or activated sludge. ■ There is almost no need for tank cleaning. *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment Plant
• Turbid water and muddy water treatment machines
• Water treatment technology and systems

This catalog is a collection of improvements for water and exhaust gas at painting sites. It introduces "Purification of sludge ponds (automotive painting line)" as well as "Purification of water washing and no-pump painting booths" and "Exhaust gas deodorization systems for painting drying ovens." It also includes records of delivered circulating water purification systems and exhaust gas treatment systems for drying ovens. Please take a moment to read through it. [Contents] ■ Purification of sludge ponds (automotive painting line) ■ Purification of sludge ponds (other painting lines) ■ Purification of water washing and no-pump painting booths ■ Exhaust gas deodorization systems for painting drying ovens ■ Records of delivered circulating water purification systems ■ Records of delivered exhaust gas treatment systems for drying ovens *For more details, please refer to the PDF document or feel free to contact us.

• Turbid water and muddy water treatment machines
• Waste treatment facility

This catalog is a collection of case studies on the improvement and new installation of wastewater treatment facilities. It includes topics such as "Wastewater Treatment in Hotel Kitchens," "Wastewater Treatment in Food Processing Plants," "Wastewater Treatment in Bread Factories," and "Wastewater Treatment for Plastic Recycling," among others. We clearly present the challenges, solutions, and results. We encourage you to read it. [Contents (partial)] ■ Wastewater Treatment in Hotel Kitchens ■ Wastewater Treatment in Food Processing Plants ■ Wastewater Treatment in Bread Factories ■ Wastewater Treatment for Plastic Recycling ■ Wastewater Treatment in Bento Factories *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Water Treatment Plant
• Water treatment technology and systems

The "Aqua Blaster" is a diffusion device that achieves both high oxygen dissolution efficiency and powerful convective mixing. By violently colliding air with internal projections, it generates fine bubbles that increase dissolved oxygen in high-load wastewater and circulating water, distributing oxygen throughout the tank to support the aerobic respiration of microorganisms. This maximizes metabolic and biodegradation capabilities. This product has over 10 years of proven performance, with more than 60 system implementations at major plant companies, large bread factories, and automobile manufacturers, actively contributing to a wide range of fields such as industrial wastewater treatment, purification and recycling of circulating water, and prevention of decay in building pits. 【Features】 - Energy-saving oxygen dissolution with intense water flow - High oxygen dissolution efficiency and powerful convective mixing - Supports aerobic respiration of microorganisms - Maximizes metabolic and biodegradation capabilities - Over 10 years of proven performance with more than 60 system implementations *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment
• Water Treatment Plant
• Water treatment technology and systems

The "Simple Filtration Device" is easy to carry and can be used in any location, allowing for the easy breakdown and filtration of wastewater on-site. When used in conjunction with the inorganic coagulant "AQUA-Nature" series and filtration filters, it demonstrates outstanding effectiveness. Additionally, the filtration filters are available in two types: sheet type and roll type. 【Features】 ■ Easy to carry ■ Usable in any location ■ Allows for easy breakdown and filtration of wastewater ■ Demonstrates outstanding effectiveness when used with the "AQUA-Nature" series and filtration filters *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment
• Water treatment technology and systems

The "AN Series" is a compact wastewater treatment device that can perform coagulation, solid-liquid separation, filtration, treated wastewater discharge, and sludge recovery all in one unit. The equipment features a compact and simple design, achieving space-saving and low cost. By using the dedicated single-agent coagulant "Aqua Nature Series," operators can safely and easily carry out wastewater treatment. 【Features】 ■ Compact design ■ Simple and economical ■ Easy operation ■ Adopts natural filtration method *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Turbid water and muddy water treatment machines
• Water treatment technology and systems

This document includes a comparison table of the characteristics of ink and adhesive-containing wastewater and products. We introduce the "basic composition of printing ink" of "Aqua Nature AL," as well as the "classification of flexo inks," "features of ink wastewater," and "improvements of Aqua Nature AL for ink wastewater compared to conventional products." A comparison table of products with the inorganic coagulant "Aqua Nature Plus" is also included. We encourage you to read it. 【Contents】 <Coagulant for ink wastewater: Aqua Nature AL> ■ Basic composition of printing ink ■ Classification of flexo inks ■ Features of ink wastewater ■ Improvements of Aqua Nature AL for ink wastewater compared to conventional products <Product comparison table for ink and adhesive-containing wastewater treatment coagulants> ■ Inorganic coagulant "Aqua Nature Plus" ■ Inorganic coagulant "Aqua Nature AL" for ink and adhesive-containing wastewater *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Water treatment technology and systems

This catalog is a collection of case studies on wastewater containing ink and adhesives that have introduced "Aqua Nature AL" and "Aqua Nature Plus." "We are unable to keep up with treatment due to poor sedimentation and increased wastewater volume." "We want to make it easy for anyone to handle due to the aging of the staff." "The use of quicklime has caused severe contamination within the treatment facility." These are some of the challenges we address. We think together with our customers about their troubles and work on improvements. Please take a moment to read it. [Contents] ■ Company A (Nagano Prefecture): Aqua Nature AL ■ Company B (Aichi Prefecture): Aqua Nature AL ■ Company C (Gifu Prefecture): Aqua Nature AL ■ Company D (Osaka Prefecture): Aqua Nature Plus ■ Company E (Osaka Prefecture): Aqua Nature AL *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Water treatment technology and systems

This catalog is a collection of case studies on wastewater treatment that have introduced the "Aqua Nature Series," "Earth Nature Series," "AQ-BP," and more. It includes examples such as "wastewater treatment in glass processing factories," "wastewater treatment in barrel polishing factories," "dredging work for ponds," and "treatment of circulating water in painting booths." We are pleased to present various implementation results. Please take a moment to read through it. 【Contents (partial)】 <Case Studies of Aqua Nature Series Implementation> ■ Wastewater treatment in glass processing factories ■ Wastewater treatment in barrel polishing factories ■ Wastewater treatment in building material manufacturing factories ■ Wastewater treatment in packaging paper manufacturing factories ■ Wastewater treatment in electrocoating factories *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment
• Water treatment technology and systems

"FLEXIS 1000" is a wastewater treatment device for resin suspensions such as flexo ink waste liquid. With its unique demulsification technology, it responds to fluctuations in raw water concentration (up to 25%). It reduces the volume of flexo wastewater with an average concentration of 2% to a filtration cake of 1/10, thereby reducing waste volume. It demonstrates effectiveness in addressing resin suspensions that could not be stably treated through coagulation and sedimentation. 【Features】 ■ Responds to fluctuations in raw water concentration (up to 25%) with unique demulsification technology ■ Reduces waste volume (equipment costs can be recovered in a short period) ■ Capable of treatment without releasing foul-smelling substances into the atmosphere ■ Also applicable to resin suspensions such as plate-making wastewater ■ Demonstrates effectiveness in addressing resin suspensions *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

"Aqua Nature TR" is a coagulant for circulating water in booths that, when added, makes paint sludge non-sticky and prevents the solidification of accumulated sludge. It can reduce the labor and time required for cleaning. It mitigates unpleasant odors and keeps the circulating water consistently clear. Additionally, the sludge flocculates and improves dewatering, allowing excess moisture to be removed, which reduces disposal weight by half. If the collected sludge is dried, it can be disposed of as waste plastic. 【Features】 ■ Prevents the solidification of accumulated sludge ■ Purifies circulating water and reduces putrid odors ■ Low cost with a small amount of addition ■ Reduces disposal costs *For more details, please refer to the PDF document or feel free to contact us.

• Mural
• Plastering and painting work

"Paint Master" is a chemical that solidifies water-based paint into granular or clump-like forms. By adding a small amount to unwanted paint and stirring for just a few minutes, the paint quickly solidifies. There is no sticking to containers or other surfaces. Additionally, by solidifying the paint, it can be disposed of as waste plastic, reducing disposal costs by half compared to disposing of it as waste paint. 【Features】 ■ Compatible with various types of water-based paint ■ Simple operation by directly adding and mixing ■ Fast solidification speed ■ Significant reduction in disposal costs *For more details, please refer to the PDF document or feel free to contact us.

• Anti-rot, anti-termite, anti-mold material
• paint
• Exterior coating materials

"Aqua Nature AL" is a coagulant for wastewater containing inks and adhesives that enables coagulation treatment without the use of multiple chemicals. The sedimentation time is very quick, allowing for a reduction in working time even in sites where small flocs previously took a long time to settle. There is no need for dissolution equipment such as quicklime or polymer coagulants. Additionally, even in continuous wastewater treatment systems, only one reaction tank is required, resulting in a very simple and compact wastewater treatment facility. 【Features】 ■ Treatment possible with just one agent ■ Space-saving treatment equipment ■ Reduction in working time ■ Lower running costs *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment Plant
• others

"Aqua Nature GM" is a product that can treat glass processing wastewater using only one type of coagulant. Since it uses only one chemical, it can coagulate with a small amount of addition, contributing to the reduction of total running costs, including chemical costs and sludge disposal costs. It also eliminates the hassle of transporting, adding, and adjusting chemicals, thereby reducing the workload. Additionally, even in continuous wastewater treatment systems, only one reaction tank is needed, achieving a very simple and compact wastewater treatment facility. 【Features】 ■ Treatment possible with only one agent ■ Space-saving treatment facilities ■ Reduced working time ■ Lower running costs *For more details, please refer to the PDF materials or feel free to contact us.

• Water Treatment

"Aqua Nature Six" is a coagulant that can treat wastewater containing hexavalent chromium with a single agent. With a small amount of addition, it forms coarse flocs. As a result, the sedimentation time is very quick, and the sludge after coagulation can be easily collected using sandbags or similar methods. Additionally, since only one reagent is used, it requires only one reaction tank, and there is no need for a reagent dissolution device. 【Features】 ■ Treatment possible with a single agent ■ Reduced working time ■ High adsorption capacity ■ Space-saving treatment equipment *For more details, please refer to the PDF document or feel free to contact us.

• Water Treatment

"Aqua Nature Light" is a product developed with our unique technology that allows sludge to float using only the chemical agent without the need for pressurized flotation devices or similar equipment. It achieves benefits such as reducing initial costs, changing wastewater treatment flows, saving space in equipment, and improving work efficiency solely through the flotation of sludge using the chemical agent. This product can perform coagulation treatment using only one chemical agent, eliminating the need for transporting, adding, and adjusting multiple chemicals, thereby reducing the workload. 【Features】 ■ Sludge floats using only the chemical agent ■ Treatment is possible with just one agent ■ Space-saving in treatment equipment ■ Reduces work burden *For more details, please refer to the PDF document or feel free to contact us.

• paint

"Aqua Nature Plus" uses domestically produced zeolite and excels in coagulation and versatility, making it effective in various wastewater treatment scenarios. It quickly coagulates with a small amount of addition, forming strong and coarse flocs. It also has excellent sedimentation properties. Additionally, it is a product developed by our company that meets various needs, such as reducing running costs, shortening work time, and saving space in wastewater treatment facilities. [Features] - Can be treated with only one agent - Excellent versatility - Reduction of running costs - Space-saving treatment facilities *For more details, please refer to the PDF document or feel free to contact us.

• Building Cleaning Equipment
• Water Treatment Plant
• Water quality/pH measuring device

"Aqua Nature" is a coagulant made from natural minerals, specifically diatomaceous earth from Noto, Hokuriku, which has an extremely low environmental impact and high safety. It can be used for coagulation treatment with just one agent. It is also excellent in workability, making it suitable for use at civil engineering construction sites. Furthermore, in fish toxicity tests using the Japanese rice fish (Hime-daka), even at an addition level of 10,000 ppm of the coagulant, the lethal dose was zero, making it an extremely safe product. 【Features】 ■ Extremely high safety ■ Treatment possible with just one agent ■ Forms coarse flocs ■ Rich lineup *For more details, please refer to the PDF document or feel free to contact us.

• Rainwater infiltration facilities