ボサード List of Products and Services

We conduct tests and measurements at the request of customers who require specific measurement values and data verification for screws, fastening components, and various metal processed products, either through our company or third-party organizations and manufacturers. We can also create reports tailored to your needs. This report will assist in making decisions based on sufficient knowledge. Quality testing and measurement services by experts provide quality assurance that matches your needs. High reliability and independence, along with compliance with standards, are fundamental to maintaining high-level product quality. Our quality control department supports the quality testing of your products and prototypes. Our specialized staff, equipped with a wide range of measuring instruments and extensive knowledge, will assist your parts and products in meeting technical and legal requirements. Our quality control room, equipped with a variety of inspection equipment including state-of-the-art devices, responds to your needs with high standards and the latest technology.

• Non-destructive testing

The limited variety of fasteners included in a single product can lead to cost reduction. By reviewing fasteners and streamlining the bill of materials (BOM), significant cost savings can be anticipated. Of the total cost associated with fasteners, the price of the fasteners themselves accounts for only 15 percent of the total. The remaining 85 percent consists of costs related to procurement, logistics, assembly preparation, and other activities. This fact indicates that the rationalization of C-parts is an important issue for the total cost of ownership of a product. Bosaard's C-parts analysis service helps review the selection of fasteners and provides clear rules for appropriate fastener types, materials, recesses, and more.

• others

This is a custom program related to engineering, applications, fasteners, and assembly, contributing to the enhancement of knowledge and skills. The key to safe and reliable products lies with engineers and designers. By acquiring deeper expertise in fastening technology, you can contribute to product improvement. Learning is available in various customized formats. In-person seminars allow for direct discussions with instructors, while online seminars enable easy learning from your own desk.

• others

The manufacturing industry is delivering amazing products to the world every day. Bostad's ATE (Assembly Technology Expert) service helps accelerate time to market and enhance your competitiveness by finding the optimal fastening solutions for each product. Engineers and designers are surrounded by challenges such as technological innovation, process optimization, and efficiency improvements that are crucial for enhancing competitiveness in the manufacturing sector. The ATE service provides smart solutions for all fastening-related challenges from the development stage of new products. Furthermore, as a company certified with ISO 9001 and ISO 14001, we prioritize quality and safety while considering the environment. The education experts of the ATE service hold seminars to help more customers increase their technical knowledge and use our services correctly. We strive to be not just a supplier, but the best partner that our customers can trust.

• others

【Features】 ■ Corrosion-resistant stainless steel 1.4305 / AISI303 (SUS303) ■ Extremely high durability, ideal for areas that need to be tightened multiple times without crushing the threads ■ Usable with lightweight metals, steel, and cast iron ■ Easy and efficient replacement parts for damaged threads on expensive components 【Benefits】 ■ Easy installation ■ High durability ■ Repair of damaged threads ■ Pre-assembled key lock

• others

The German company KKV (Kerb-Konus-Vertriebs-GmbH) offers various screw insert options under the Ensat brand, depending on the required fastening method. ■ Self-tapping screw inserts for metal, wood, and plastic ■ Screw inserts for cold embedding ■ Screw inserts for hot embedding or ultrasonic embedding ■ Screw inserts for female threads ■ Screw inserts for rivet joining

• others

Wire thread inserts contribute to cost reduction in manufacturing while maintaining the strength of the threads by using lightweight materials such as aluminum and magnesium. They are suitable not only for metal and plastic substrates but also for softer materials like aluminum, magnesium, and titanium.

• others

POP's original blind rivets are a leading brand that reliably and efficiently connect two or more steel, plastic, or various materials with different strengths and thicknesses. Depending on the application, you can choose from various types of blind rivets, including the types of rivet heads, rivet bodies, and mandrel heads.

• others

Disposable mandrels ensure the safety of the process as machine operators do not need to determine the appropriate mandrel or check for wear on the mandrel. 【Features】 ■ Quick processing (up to 70 rivets can be installed per minute) ■ Cost reduction, no break stems, no waste ■ Lightweight ■ Various materials

• others

FASTEK's standard blind rivets can be installed in stop holes, non-circular holes, or large tolerance holes. High-strength blind rivets are ideal for areas requiring high load capacity and high vibration resistance. Additionally, the break stem can mechanically lock to the rivet body during installation, making it effective in preventing detachment under high vibration conditions. This locking feature boasts very high shear strength and tensile strength. 【Features】 ■ Wide range of product selection ■ Quick and easy assembly ■ Permanent fixation possible

• others

This is an efficient solution for installing fastening bolts when access to the back of the panel is not possible. It can create elastic threads, especially in thin parts and hollow sections. 【Features】 ■ One-sided installation ■ Versatile applications: can be used as blind rivet nuts or blind rivet screws ■ High tensile strength due to rivet beading ■ Can be assembled onto surface-treated parts ■ Wide range of head shapes and materials ■ Can be inserted with a manual rivet gun or hydraulic pneumatic tools ■ Stable gripping force

• others

The ecosyn-BCT blind rivet nut does not require filling the hole in the base material to match the rivet, allowing for direct insertion, making it highly efficient and significantly reducing the stress on the base material compared to standard blind rivet nuts. 【Features】 ■ Bulge formation without the need for hole filling or stress induction ■ One-sided access only: extremely efficient setup ■ Independent applications from the base material in a wide range of fields

• others

**Features** ■ Push Rivet: A plastic rivet for attaching panels. ・Easy attachment and detachment: Pressing the pin (head) expands the legs for installation. To remove, push the pin further in to release the lock, allowing for easy removal once it is straightened. ・No special tools required: Can be attached and detached with just a single push by hand. ■ Aluminum Hand Rivet: A metal rivet that can be installed by pressing the pin (head) with your finger without using tools. ・Leads to reduced labor and increased work efficiency. ・Made of aluminum, it has excellent strength and corrosion resistance. ・Coloring is possible through anodizing treatment. ・Special tool: Can be used in narrow gaps, hard-to-apply force areas, or places where fastening with fingers is difficult. Also recommended for bulk fastening. ・The RH type aluminum hand rivet (simplified removal type) has a larger head on the rivet pin, making it easier to grip and remove. ■ Parker Nail: A rivet with a coarse spiral on the shaft that is fixed by drilling a specified pilot hole and hammering it in. It is also called a driven nail.

• others

It is a fast, clean, and highly reliable method for bonding fasteners to composite materials and metal substrates. Lean bonding accommodates both fully automated mass production and manual assembly for small-scale production. With a short cycle time of just 10 seconds, lean bonding will transform your production process.

• others

We provide the perfect solution to optimize your products. We accommodate standard and extended lineups as well as different original products. ■ Various sizes and configurations to maximize the potential of the product ■ Coating options to meet a wide range of needs ■ Features to integrate the manufacturing process and optimize assembly work ■ Products that fully meet specific applications and required performance

• others

In addition to the standard lineup, we offer a wide range of fix types and head options. You can choose products that cater to various applications and environments. * For more details, please contact us or view the PDF data available for download.

• others

This is the standard lineup of bigHead fasteners. The core lineup consists of simple bigHead fasteners for both embedded and surface bonding applications. The core lineup simplifies the selection of fasteners, allowing you to choose from small, medium, or large heads made of SC material or SUS316 for either male or female fixing parts. You can select the appropriate bigHead from the guides and technical data. In addition to the core lineup, there are also extended lineup products and custom products available. Custom products can be tailored to meet your specific needs. *For more details, please contact us or view the PDF data available for download.*

• others

The ultra-low head hex socket bolt (cap) has a head height of only 1.6 mm at most, which minimizes protrusion and eliminates the need for counterboring, making it suitable for thin materials. Additionally, it is adopted as a "user-friendly" barrier-free part in welfare equipment and large playground equipment. 【Features】 ■ Compact ■ Lightweight ■ Safe ■ Improved construction efficiency ■ High design quality ■ High versatility 【Product Lineup】 ■ Ultra-low head hex socket bolt ■ Low head hex socket bolt ■ 6-lobe ultra-low head cap ■ 6-lobe low head cap ■ Type A tapping ■ Lamix / Lamimate ■ Resin hex socket products

• others

"SEAL LOCK" is an effective sealing solution for bolt and nut fastening that completely addresses two challenges: sealing the lock nut attached to the adjustment screw of hydraulic components and transmission devices, and sealing the stud bolt nut attached to automotive engines where the stud bolt hole is used as an oil passage. It provides sealing between the internal threads and under the nut, and features a flange nut with an integrated sealing material, requiring no special assembly. 【Features】 - Strong sealing against leaks at the nut and internal threads - High-strength screw fastening with no loss of tensile strength - Repeated assembly For more details, please contact us or download the catalog.

• Joints between components

"RIPP LOCK" is a lock washer with radial ribs on both sides. The pitch angle of the ribs is designed to be larger than the screw pitch. When screws and nuts are assembled, the ribs bite into the bolt seating surface and the clamped part, locking them in place. This provides a high vibration resistance effect. 【Features】 - Easy assembly and disassembly - reusable - Contributes to the reduction of the number of parts - Suitable for all materials up to grade 12.9 - Ideal for applications with slot holes For more details, please contact us or download the catalog.

• Joints between components

In companies and factories, various parts and materials are handled. Managing and arranging such diverse inventory while considering factors like forecasted usage and lead time is a very labor-intensive and costly task. SmartBin Cloud, provided by Bosard, solves numerous problems in inventory management and realizes an optimal manufacturing environment. SmartBin Cloud enables automatic inventory measurement, automatic ordering, and delivery. By integrating with the ARIMS platform, it allows you to check product information, inventory quantities, and order status within the company from anywhere, and inventory checks can be completed in just one second. * For details, please contact us or view the PDF data from the download. * If you would like a demo, please contact us.

• Other interior and exterior systems and units