コバックス List of Products and Services

The "Super Tuck Garuda" achieves high durability through "sustained cutting power," "strength of the base material," and "resistance to clogging." 【Features】 ■POINT 1: There is no sudden decrease in cutting power when polishing steel plates and metal substrates. ■POINT 2: Even when polishing with edges, there is no occurrence of edge distortion, tearing, or grain loss. ■POINT 3: There is no clogging or tangling, and cutting performance is sustained. ■Does not tear! Does not distort! A robust base material is used. Even when polishing corners, protrusions, and edges, tearing or distortion of the edge is unlikely to occur. ■Outstanding cutting performance and durability! There is no sudden decrease in cutting performance even with hard materials like metal substrates and steel plates. ■Resistant to clogging and tangling! A clogging prevention treatment is applied, resulting in fewer clogs and tangles during polishing, allowing for sustained initial cutting power. ★If you would like a free sample, please feel free to contact us.

• others

The "KIDF-2065-100" is a state-of-the-art attachment exchangeable grinding device that applies tape grinding technology to accommodate a wide variety of workpiece shapes. Equipped with a rotating mechanism for the grinding head, it can perform grinding not only on the outer peripheral surfaces of cylindrical objects but also on corner R surfaces and tapered sections. Additionally, internal diameter grinding has become possible through attachment exchange. 【Features】 ■ The grinding head can be pressed against the workpiece at an angle suitable for the grinding surface. ■ By exchanging the front attachment, internal diameter grinding is possible for diameters from φ20 to 65mm and depths up to 100mm. ■ The grinding head can be swung up to 90°, allowing for grinding up to the edge. ■ Environmentally friendly grinding processes are possible. ■ Selection of grinding films suitable for the material of the workpiece can be made. ★ Test processing is always accepted! Please feel free to contact us if you are interested. * For more details, please refer to the PDF materials. Inquiries are also welcome.

• others

The "KFD Series" is a lightweight, compactly designed tape grinding unit that employs PLC control. By selecting the hardness of the contact roller and the grit of the grinding tape according to the work material, managing surface roughness becomes easy. It is capable of both dry and wet grinding, making it suitable for grinding automotive parts, OA equipment parts, precision shafts, and more. 【Features】 ■ Lightweight, compact design ■ Employs PLC control ■ Capable of dry and wet grinding ■ Easy replacement of grinding tape ■ Touch panel adopted for the control section *For more details, please refer to the PDF document or feel free to contact us.

• others

"Super Asilex Super Bufflex" is an abrasive material designed to pursue work efficiency. It excels in flexibility, fitting various shapes such as uneven surfaces, reverse R areas, and edges, allowing for effective polishing. With a soft touch, it can polish smoothly, enabling areas that were previously hand-polished to be efficiently polished with a sander. Additionally, it does not leave deep scratches and provides a uniform polishing pattern, ensuring that no polishing marks remain in subsequent processes such as finishing and painting. [Features] ■ Achieves excellent work efficiency ■ Ensures reliable polishing with no uneven finishes ■ Compatible with a wide range of industries and applications ■ Less clogging and tangling compared to conventional abrasive cloths ★ If you would like a free sample, please feel free to contact us.

• others

We would like to introduce the "Torecut Series" handled by Kobax. This film polishing material significantly improves the efficiency of removing dust, drips, and flows after painting through air polishing. We offer six types, including "Torecut Black K-3000" for removing small debris like dust, and "Torecut Orange K-1200" for polishing edges. 【Features】 ■ Allows for polishing while visually checking the removal condition through air polishing ■ Capable of removing debris, drips, and flows in reverse R areas that are difficult to remove with grinding stones ■ Six types available ■ Sheet size: 70×114mm ■ Quantity: 50 sheets per small box ★ If you would like a free sample, please feel free to contact us.

• others

"Lapika" is a high-precision, ultra-fine finishing polishing film. Thanks to a special coating of fine polishing particles that evenly disperses the abrasive material and precisely manages the thickness of the PET substrate film, it achieves a high-precision finish without deep scratches or polishing unevenness. It excels in water resistance, oil resistance, and durability, making it suitable for automated polishing and quality control. It is used for finishing and cleaning precision parts, various roll polishing, and polishing of optical fiber connector end faces. 【Features】 - High precision, ultra-fine finish - No deep scratches or polishing unevenness - Excellent water resistance, oil resistance, and durability - Suitable for automated polishing and quality control - Available in various shapes such as sheets, discs, and rolls. *For more details, please refer to the PDF document or feel free to contact us.

• others

We have developed a "work contour-following" film polishing device that utilizes conventional film polishing methods from various angles, allowing the contact roller to be pressed against not only the outer circumference of cylindrical objects but also at optimal angles on the workpiece's contour. 【Features】 ○ The polishing head can be pressed against the workpiece's polishing surface at an optimal angle. ○ By rotating two types of contact rollers, a wide range of polishing processes is possible. ○ The polishing head can swing up to 90°, allowing for polishing up to the edge. For more details, please contact us or download the catalog. 【Exhibition Name】The 36th Monozukuri World [Tokyo] 【Dates】June 19 (Wednesday) - 21 (Friday), 2024, 10:00 - 18:00 *Only on the last day until 17:00 【Venue】Tokyo Big Sight, Mechanical Elements Technology Exhibition, East Hall 3, E23-50

• others

"Mystofilm" is a precision grinding film with abrasive particles electrostatically coated onto its surface. By using a film as a substrate that is flatter and has a uniform thickness compared to paper or cloth, precise grinding becomes possible, resulting in a high-quality finish. Additionally, the use of rolls allows for a continuous supply of a new grinding surface, achieving uniform automatic grinding. 【Features】 ■ Excellent durability for both dry and wet grinding ■ Products with special treatments on the back to enhance grip are also available ■ Versatile applications including flat grinding of various substrates, grinding of various automotive shafts, roller grinding for office equipment, and grinding of coatings *For more details, please refer to the documentation. Feel free to contact us with any inquiries. ★ Free samples are currently available. If you are interested, please contact us.

• others