岩瀬生コン List of Products and Services

This is a concrete lattice base. If it falls over due to the wind, please bury this product 7 to 8 cm into the ground for installation. If the installation location is asphalt or concrete, you can drill a hole in the installation area with a hammer drill, pass an anchor bolt through the hole in the center of this product, and secure it. When aligning the lattice fence, please attach a dedicated fitting to the top to secure it (sold separately). If the lattice fence wobbles, please insert a thin board or similar object into the gap to stabilize it. It can also be used as a wooden deck or a platform for a futon. The size is 200 x 200 x 150. The weight is approximately 10 kg. It is registered as a utility model. For more details, please contact us or refer to the catalog.

• Wood deck (synthetic wood/resin)

Concrete products multi-purpose pin collar, this product has embedded insert fittings. In the center, there are drainage holes and mortise holes. You can insert a pin into the drainage hole to secure the multi-purpose pin collar. It is registered as a utility model. Since it contains an M12 insert, various fittings such as strut brackets, eye bolts, L brackets, and M12 bolts/pins can be used. - Multi-purpose pin collar (without fittings) - Multi-purpose pin collar (with eye bolt) For more details, please contact us or refer to the catalog.

• Drainage and water removal
• Concrete Machinery
• Imported houses and log houses

The U-shaped holder for single pipes is a product designed to facilitate the easy construction of flower beds, fences, and retaining walls. By setting the holder on a single pipe fixed to the ground and inserting boards into the U-shaped part, you can easily create fences or flower beds. The height of the fence can be freely adjusted by stacking the holders. There are three sizes available: 35 for lattice fences, 40 for 2x4s, and 55 for retaining boards and garden panels, allowing for the use of various sizes of boards. By using a round holder, you can create movable parts such as height adjustments and doors, enabling the construction of various structures depending on the combination. When fixing the single pipe to the ground, using a single pipe base will ensure a secure attachment.

• Gates, walls and fences

It is a concrete catch basin (Tame-masu) mainly used for side ditches and similar applications. The recess for the drainage pipe is located on three sides. The available sizes are as follows: - 150 (5 inches) - 180 (6 inches) - 240 (8 inches) - 300 (1 shaku) - 360 (1 shaku 2 inches) - 450 (1 shaku 5 inches) - 600 (2 shaku) We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Drainage and water removal
• Earthworks
• Pile and foundation work

It is mainly used for ditches and drainage in concrete U-shaped channels. The available sizes are as follows: - U-shaped channel 60 - U-shaped channel 90 - U-shaped channel 120 - U-shaped channel 150 - U-shaped channel 180 - U-shaped channel 240 - U-shaped channel 300B - U-shaped channel 360B We also accept production of other custom items (sizes, processing, etc.), so please feel free to consult with us.

• Gutters and U-shaped gutters

Concrete products, such as edge blocks, are mainly used for road-related applications. They can also be used as dividers for flower beds or as substitutes for parking blocks. The available sizes are as follows: - Edge Public Corporation: 100×100×600 - Edge Type A: 120×120×600 - Edge Type B: 120×150×600 - Edge Type C: 150×150×600 Processing options include one beveled side and no chamfering. We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Dam construction

This is a concrete well side used for well construction. The available sizes are as follows: - Well side 600 - Well side 750 - Well side 900 - Well side 1200 We also accept production of other custom items (sizes, processing, etc.), so please feel free to consult with us.

• Gutters and U-shaped gutters

This is a concrete lid for the well side that corresponds to the main body of the well. The available sizes are as follows: - For well side 600 - For well side 750 - For well side 900 - For well side 1200 We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Inspection hatches, manhole covers, and ditch covers

This is a concrete cover for a catch basin (drainage basin) corresponding to the main body of the catch basin. It has recesses on both sides for easy removal. Since there are no holes, it can prevent odor leakage. The available sizes are as follows: - For 150 (5 inches) - For 180 (6 inches) - For 240 (8 inches) - For 300 (1 foot) - For 360 (1 foot 2 inches) - For 450 (1 foot 5 inches) - For 600 (2 feet) We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Drainage and water removal
• Earthworks
• Pile and foundation work

This is a concrete improvement box. There is a half box that is half the height of a regular box, so please use it according to your needs. The available sizes are as follows: - 180 (6 sun) - 240 (8 sun) - 300 (1 shaku) - 360 (1 shaku 2 sun) - 450 (1 shaku 5 sun) - 600 (2 shaku) We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Drainage and water removal
• Earthworks
• Pile and foundation work

This is a type of frame that can be used in combination with drainage boxes to raise the height. The available sizes are as follows: - For 150 (5 sun) - For 180 (6 sun) - For 240 (8 sun) - For 300 (1 shaku) - For 360 (1 shaku 2 sun) - For 450 (1 shaku 5 sun) We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Drainage and water removal
• Earthworks
• Pile and foundation work

Concrete slide blocks are products used as bases for outdoor air conditioning units, boilers, signboards, and more. Since bolts can be attached to the rails, there is no need to drive in anchor bolts as with traditional methods, allowing for easy installation. The available sizes are as follows: - 100×100×400 - 100×100×500 - 120×120×600 We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Air conditioning
• Dam construction

This is a concrete cover for U-shaped gutters that corresponds to the main body of the U-shaped gutter. The available sizes are as follows: - For U-shaped gutter 60 - For U-shaped gutter 90 - For U-shaped gutter 120 - For U-shaped gutter 150 - For U-shaped gutter 180 - For U-shaped gutter 240 - For U-shaped gutter 300 - For U-shaped gutter 360 - For U-shaped gutter 180, Type 2 cover (for road use) - For U-shaped gutter 240, Type 2 cover (for road use) - For U-shaped gutter 300, Type 2 cover (for road use) We also accept production of other custom items (sizes, processing, etc.), so please feel free to consult with us.

• Gutters and U-shaped gutters

These are concrete flat slabs. They come in various sizes and can be used for a variety of purposes. The available sizes are as follows: - 200×200×50 - 250×250×60 - 300×300×40 - 300×300×60 - 300×295×100 - 300×450×60 - 300×600×60 - 450×600×60 - 450×700×50 We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Rock wool board

These are concrete fence blocks (foundation blocks). They can be used for various purposes such as fence construction and as foundations for mega solar projects. The common sizes are: - 180*180*250 - 180*180*450 - 180*180*600 - 200*200*450 - 200*200*600 - 250*250*250 - 250*250*300 However, since there are many sizes available, please refer to the size chart for fence blocks in the catalog. We also accept orders for custom products (sizes, processing, etc.), so feel free to consult with us.

• stone

These are concrete pin stones (bundled stones). They come in various sizes and can be used for a variety of purposes. The available sizes are as follows: 100×100×50 100×100×100 150×150×50 150×150×100 150×150×120 150×150×150 150×200×150 150×250×150 150×300×150 150×400×150 180×180×180 200×200×150 200×200×200 We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Concrete Retaining Wall

These are concrete boundary stakes. The available sizes are as follows: - 75×75×450 (+ -) - 90×90×600 (+ -) - 90×90×600 (/) - 90×90×600 (→) We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Concrete sheet piles and piles
• Piles, caissons, sheet piles
• Pile and foundation work

This is a concrete sidewalk ramp (step plate). The available sizes are as follows: - 330×600×100 - 390×600×150 - 330×600×100 (with fittings) - 390×600×150 (with fittings) We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Parking lot facility construction

This is a concrete hanetsuki board with a footstone. The available sizes are as follows: - 3.5 sun - 4 sun - 5 sun - 360 - 450 We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• stone

This is a concrete stepping stone. The available sizes are as follows: - 3 sun - 4 sun - 5 sun We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• stone

This is a concrete flagpole base. We have round (large) and trapezoidal sizes available. We also accept orders for custom products (sizes, processing, etc.), so please feel free to consult with us.

• Concrete Retaining Wall

This is a concrete high-pressure step platform. The available sizes are as follows: - Small: 360×400×145 - Large: 360×400×225 - Long: 330×600×160 If you have any questions, please feel free to contact us.

• stone

This is a concrete drying rack (with a concrete base). The size is 390×320×190. We also accept orders for other custom products (size, processing, etc.), so please feel free to consult with us.

• Concrete Retaining Wall