矢崎エナジーシステム List of Products and Services

"The Dust-Free Ace Mic SAS-R2" achieves a cleanliness class of 1,000 (FED standard FED-STD-209E) by adopting new materials and structures while eliminating the base fabric, making it suitable for use in clean rooms. Additionally, due to good conductivity between the top and bottom of the sheet, it allows for direct discharge (grounding), making it a versatile conductive sheet that can be used on floors, work tables, and shelves.

• Interior and exterior tiles
• Safety and consumables

"The Earth In 600V-CV" is a compact and lightweight 600V cross-linked polyethylene insulated vinyl sheath cable with a reduced size ground wire. It can be used for wiring in factory outlets, 200V wiring for residential air conditioners and induction heating, power wiring, storage heating wiring, and interconnections for solar panels.

• Water heater Cooker IH
• Air conditioning
• Water and sewerage pipe fittings

It is a LAN cable compatible with 10BASE-T to 1000BASE-T, and it uses REELEX (figure-eight winding), making it easy to pull out from the case.

• Unit and other construction

It complies with the "standards for heat-resistant wires" according to the Fire Service Act and is used in low-voltage circuits for devices such as fire hydrants, sprinkler activation systems, and alarm systems.

• Fire alarm device

It is widely used for telephone purposes. To improve leakage characteristics, a twisted structure is adopted, and a fine pitch is set. It can also be used for LAN as 10BASE-T.

• Call device

This is a vinyl insulated vinyl sheathed cable (VVR) widely used for branch lines from the main lines of control panels, and from substations in factories, etc.

• Other commercial buildings and service facilities

We offer "Ace Mic Binder," which has a conductive coating on both sides of the hard plastic, ensuring stable performance. Additionally, we also have "ESD Clear Holders" that can be used in processes where static electricity generation is a concern.

• Safety and consumables

It is a vinyl insulated wire used for low voltage overhead power lines, coated with weather-resistant black vinyl.

• Water and sewerage pipe fittings

It is a communication cable that is fully coded for use in internal communication lines, featuring an electrostatic shielding layer made of aluminum foil laminated plastic tape and drain wire.

• Information and communication equipment and infrastructure

This is a type of vinyl insulated electric wire for overhead service lines used as a low voltage overhead service drop.

• Water and sewerage pipe fittings

This is an alarm cable used in the detection circuits of automatic fire alarm systems and leakage fire alarm devices.

• Water and sewerage pipe fittings

The earth code is between the conductive sheet and the mat, as well as between the conductive sheet and the mat themselves. The grounding terminal allows for a one-touch connection via a snap terminal. It includes a 1MΩ resistor.

• Water and sewerage pipe fittings

This is a cross-linked polyethylene insulated vinyl sheath cable with excellent electrical and physical properties, designed for 6kV wiring circuits. We also offer a triplex type made of a single core and three strands combined. Additionally, we have the EE type, which features a three-layer structure of an internal semiconductive layer, an insulator, and an external semiconductive layer, all extruded simultaneously. The EE type is particularly resistant to water treeing.

• Water and sewerage pipe fittings

We offer "double-sided conductive tape" for connections between conductive flooring and other conductive materials, as well as for various applications such as grounding, and "copper foil tape" for connecting conductive flooring and table mats, or for use as EMI shielding material.

• Safety and consumables
• Water and sewerage pipe fittings

We have prepared a compact, portable digital display static electricity FMX004.

• Other measuring instruments

The "Shield Bag #8000" is designed to have effective shielding properties against static electricity, demonstrating over 96% static electricity shielding effectiveness.

• Safety and consumables

We use conductive plastic corners and conductive rubber casters, so we have "Angle Carry," which can be grounded simply by placing it on an electrostatic discharge floor, and "Container," which prevents static electricity buildup and the adhesion of dust and dirt. Both have a resistance value of 10^6Ω or less.

• Transport machinery

The aerostat has a built-in ion balance circuit and is available in a desktop type and a small lightweight type.

• Safety and consumables
• Unit and other construction

The conductive PVC sheet "Ace Mic SAS-R2" is a long sheet with excellent electrical performance and high cost performance.

• Exterior tiles
• Interior and exterior tiles
• Safety and consumables

The conductive PVC tile "Ace Mic SCT-R2" is a conductive tile that meets NFPA standards, featuring stable electrical performance and durability. We promise comprehensive electrostatic measures from acceptance to shipment.

• Exterior tiles
• Interior and exterior tiles
• Safety and consumables

We have prepared a rubber mat "conductive rubber mat" suitable for workbenches that use solder. The color is green.

• Safety and consumables

As part of our measures against static electricity, it can be used in computer rooms, offices, and more. We offer a wide variety of sizes. We promise to provide comprehensive solutions for static electricity control from receiving to shipping.

• Safety and consumables

This is a flat cable with vinyl insulation and vinyl sheath widely used for indoor low-voltage wiring in buildings. It is available with a G mark for grounding circuits, a 200 mark for 200V circuits, and color variations for wiring circuit identification.

• Water and sewerage pipe fittings

"EF Earth" is a structure that adheres the ground wire to the outside of the cable sheath, allowing for easy separation of the ground wire. It has significantly improved work efficiency (in terms of extracting the ground wire, threading, identification, etc.).

• Water and sewerage pipe fittings

The "Yazaki Branch" is an electrical wiring system developed for the purpose of labor-saving and high reliability in low-voltage wiring work for buildings, apartment complexes, factories, schools, etc. This system consists of cables that have pre-processed connections between the main cables and branch cables at the factory. It is an excellent prefabricated main cable that achieves labor-saving in on-site work, shortens construction periods, and ensures high reliability in low-voltage wiring work.

• Water and sewerage pipe fittings
• Prefab

The "Yazaki Unit" is an electrical wiring system developed to streamline indoor wiring work for single-family homes, multi-family residences, and condominiums, with a focus on high reliability. It is an excellent indoor unit cable that connects the necessary electrical wiring circuits in advance at the factory and molds the connection parts. While inheriting the high reliability and high-quality performance of conventional units, it has been further slimmed down and miniaturized. In particular, its shape allows for a variety of installation methods, significantly improving workability at construction sites.

• Water and sewerage pipe fittings
• Unit and other construction

"Sansoft cable" is a type of cable mainly used for the connection from utility poles to the eaves of houses. It is designed with weather resistance and flexibility of a 600V-CV insulation, combining the handling characteristics of VVR with the current capacity of CV cables. It has a higher allowable current than VVR, allowing for a reduction in conductor size by one to two sizes.

• Water and sewerage pipe fittings

"Soft EM wires and cables" have excellent handling properties due to their soft insulation and sheath. They also have great recyclability, which helps reduce waste. We offer a wide variety of types, including power and control cables, communication cables, and disaster prevention cables.

• Water and sewerage pipe fittings

The CV cable live line deterioration diagnosis device DISC-20-AS is designed to accurately detect harmful water trees, which account for the majority of insulation breakdown accidents in 6kV class CV cables, allowing for planned cable replacement work. Furthermore, this insulation diagnosis is performed while the line is live, eliminating the need for cumbersome tasks such as notifying of power outages on the line. Additionally, since the diagnosis is conducted for all three phases simultaneously, maintenance and inspection of the cables can be carried out efficiently. Moreover, the device can be safely operated by simply attaching it to the existing grounding wire. This device is a model upgrade that retains the basic characteristics and functions of the DISC-10G-AS while improving usability.

• Rock drills, demolition machines, and excavators
• Other measuring instruments
• Electrical Equipment Testing

Cutting in high places and narrow spaces is safe, and wiring inside panels can be done neatly in a short time. The "Soft Wire 600V・6kV Series" is softer than conventional products, making it easier to maintain the desired shape when bent. The deflection amount is 2 to 3 times that of other companies! (for 200mm²) Wiring work in tight spaces can be done safely and quickly, reducing various risks during cutting operations. The "Soft Wire Premium 600V-CVT Series" further enhances the workability of the "Soft Wire"! Particularly, workability at low temperatures (5°C) has significantly improved. 【Features】 ■ Easy to shape and maintain the bent form ■ Improved safety and peace of mind ■ Enhanced workability, reducing work time

• Water and sewerage pipe fittings