アメロイド List of Products and Services

The "FK-type cyclone" is a device that efficiently separates and collects sludge (foreign substances) by utilizing the centrifugal force generated by the flow of liquid. Since it does not use consumables like filters and has no moving parts, there is no concern about clogging or breakdowns, allowing for stable operation. With its simple structure, maintenance is also easy, enabling continuous collection of foreign substances with minimal troubles and low costs. *For more details, please feel free to contact us.*

• others

The "REX Filter" is a deep filtration system compatible with aqueous solutions and oils. The cartridge sizes range from small to large, and the filtration precision can be selected from 1μ to 100μ. The structure, which has a higher density from the outside to the inside of the filter cartridge, effectively captures debris not only on the surface but also internally, achieving high precision and long-lasting filtration. Additionally, it is equipped with a pressure sensor that alerts users to the optimal replacement timing of the element. This allows for stable management of liquid cleanliness, ensuring safe usage. *For more details, please download the catalog or feel free to contact us.*

• others

This is an oil filter that is ideal for overhauls and oil change operations. It uses a pleated surface filtration method with a filter element that reduces oil flow resistance, enabling high flow rate processing. It shortens the oil purification time and demonstrates stable oil purification performance even with large volume processing. *For more details, please feel free to contact us.*

• others

The "Floating Oil Recovery Device FU Type" is a floating oil recovery system composed of a float suction, pump, and oil-water separation tank. It efficiently sucks in floating oil in response to fluctuations in the liquid level, and the floating oil is continuously discharged from the oil outlet through a partition plate. The purified water is returned to the tank. With no moving parts, it has a low risk of failure, contributing to stable oil-water separation and reduced running costs. *For more details, please download the catalog or feel free to contact us.*

• others

The "CJC Filter" is a high-performance oil purification machine representing Ameloy, featuring a high-density element with an absolute filtration accuracy of 3μm. It maintains a cleanliness level equivalent to ISO 16/14/11, effectively removing fine foreign particles and moisture. Additionally, it is equipped with a pressure sensor that alerts users to the optimal replacement timing of the element, supporting improved oil cleanliness management and stable operation. By using an offline method that circulates oil within the tank, it helps maintain high overall oil cleanliness, contributing to a reduction in the frequency of line filter clogging. It maintains cleanliness levels comparable to new oil, reducing the risk of failure in hydraulic equipment such as servo valves and turbines, thereby helping to lower maintenance costs, reduce oil change frequency, and minimize waste oil. *For more details, please download the catalog or feel free to contact us.*

• others

The "PTU Filter" is a high-performance device that combines a CJC filter with an absolute filtration accuracy of 3μ and a coalescing oil-water separator. By filtering out fine contaminants mixed in the oil and efficiently separating moisture, it restores the clarity of cloudy oil to that of new oil. It is ideal for equipment such as hydraulic systems, turbine systems, and vacuum pumps, which are prone to contamination by water and foreign substances, contributing to stable operation, extended oil change intervals, and reduced waste oil. *For more details, please download the catalog or feel free to contact us.*

• others

The "ROT filter" is one of the representative filtration filters of Ameloid that employs a deep filtration method with filter elements. The filtration accuracy can be widely selected from absolute 5 to 75μ, and it is compatible with oils and aqueous solutions of low to high viscosity. It is equipped with a pressure sensor that has a function to notify the timing for element replacement, supporting the management of liquid cleanliness. Additionally, by circulating and filtering the liquid in the tank offline, it reduces the frequency of clogging in the line filter. By removing contaminants from the oil and maintaining high cleanliness, it helps reduce the failure rate of equipment such as rolling machines and vacuum pumps, lower maintenance costs, decrease the frequency of oil replacement, and reduce waste oil. *For more details, please download the catalog or feel free to contact us.

• others

The "Amyloid Separator AS Type" is a medium-speed (3,000 to 5,000 RPM) centrifuge developed through years of improvements, capable of handling water, oil, and all types of liquids. It separates and solidifies sludge from liquids with powerful centrifugal force. The automatic discharge makes processing easy. With a user-friendly touch panel control system, it is a tough and high-performance centrifuge that excels in ease of use on-site. By removing impurities from various liquids used in factory production lines, it contributes to increased productivity, improved quality, extended liquid lifespan, and reduced waste treatment costs. *For more details, please download the catalog or feel free to contact us.*

• others

The "MJ Type Centrifugal Drying Device" is a high-performance oil-water separator unique to Ameroid, unlike any other. It automatically discharges free water and continuously removes water mixed with oil. At the same time, it also removes fine impurities in the oil using centrifugal force, restoring the cloudy oil to a state similar to that of transparent, high-purity new oil. Even in environments where water continuously mixes in, its overwhelming dewatering performance proves effective, eliminating the need for daily water removal tasks. Additionally, it helps avoid sudden troubles caused by reduced lubricity due to water contamination, significantly reducing maintenance labor, lowering re-oiling costs and waste oil costs, and minimizing opportunity losses due to production downtime. *For more details, please download the catalog or feel free to contact us.*

• others

The "Centrifugal Oil Separator UB Type" is a dual-purpose centrifugal separator that performs oil-water separation and sludge removal for various aqueous solutions. The oil separated from the aqueous solution is continuously discharged from the oil outlet, while the collected sludge is solidified and periodically discharged from the sludge outlet. This reliable and tough oil-water separator is active in a wide range of fields, from purifying various aqueous solutions used in factory production lines to reducing the burden on wastewater treatment facilities. *For more details, please download the catalog or feel free to contact us.*

• others

The "WF-type centrifugal oil separator" is a high-speed centrifugal separator that removes oil from aqueous solutions such as coolant and cleaning liquids. With a powerful centrifugal force of 10,000G, it efficiently separates oil and water, restoring clarity to liquids that have become cloudy with oil. Additionally, it can simultaneously recover fine contaminants mixed in the liquid, keeping it clean. By continuously collecting oil and sludge from the coolant, it helps suppress bacterial growth and is effective in odor control. Its compact unit structure allows for space-saving installation. It accommodates a variety of liquid types and supports stable liquid management in production environments. *For more details, please download the catalog or feel free to contact us.*

• others

The "Super Dry SDA Type" is a core-less oil-water separator. It coarsens and separates fine water droplets dispersed in oil, restoring clarity to the cloudy oil. At the same time, it removes foreign substances larger than 10μm. It is effective in cases where a large amount of water is mixed into the oil, which cannot be handled by water-absorbing filters, contributing to the reuse of oil and equipment protection. *For more details, please download the catalog or feel free to contact us.

• others

The "Evaporator EVP type" is a device that distills wastewater for concentration and volume reduction. By adopting a heat pump cycle, it enables high-efficiency processing with minimal thermal energy. The heating section of the concentration tank uses a submerged coil, which also reduces maintenance load. By combining it with the "Centrifugal Oil Separator UB type" as a pretreatment, it achieves a higher concentration rate than typical distillation devices. Additionally, the distilled water can be reused as industrial water, and by incorporating post-treatment options such as the "Centrifugal Oil Separator WF type" or "UQ Filter," it can be directly discharged into the sewer. *For more details, please download the catalog or feel free to contact us.

• others

The "Dry Separator GR40" is a wastewater treatment device that combines a centrifuge and a drum dryer. It dries slurry into a powder form with a moisture content of 40% or less, achieving up to a 70% reduction in industrial waste volume compared to filter presses. It contributes to environmental improvement by reducing waste volume, lowering processing costs, and suppressing CO₂ emissions and odors. Its fully automatic operation without filter cloth also reduces the burden of work. The "Dry Separator GR40" has received numerous prestigious awards, including the Special Award at the Monozukuri Nippon Grand Award, as a new technology that replaces filter presses. ● Awarded the Special Award at the 6th Monozukuri Nippon Grand Award ● Awarded the Grand Prize at the 32nd Kanagawa Industrial Technology Development Award ● Awarded the Minister of Economy, Trade and Industry Award at the 41st Excellent Environmental Equipment Awards ● Awarded the Grand Prize in the Environment (Eco) category at the 5th Kanagawa Industry Navi Awards ● Awarded the Hyogo Prefecture Invention Award in 2017 *For more details, please download the catalog or feel free to contact us.

• others

The "KR5 Model Centrifugal Chip Dehydrator" is a device that efficiently separates and removes cutting oil adhered to chips discharged from machine tools using centrifugal force. By de-oiling the cutting oil attached to the chips, it resolves issues such as troubles in the chip recycling process and long drying times. Additionally, by combining it with the "UB Model Centrifugal Oil Separator" downstream, it enables the reuse of cutting oil, helping to reduce oil loss and consumption. It can handle both ferrous and non-ferrous materials and is suitable for both water-soluble and non-water-soluble cutting fluids. It is also capable of constructing a series of systems combined with peripheral equipment such as crushers, conveyors, and drum reversers. *For more details, please download the catalog or feel free to contact us.

• others

The "Coolant Vacuum Cleaner (Centrifugal Type) GH9V" is a coolant vacuum cleaner equipped with Ameloyd's centrifugal separation technology. It efficiently collects accumulated grinding powder and fine sludge from the coolant tank of machine tools by sucking it in with a handheld nozzle, utilizing powerful centrifugal force. Since it does not use disposable bags like non-woven fabric, there are no daily consumables required, and there is no decrease in suction power. Cleaning can be done without draining the coolant liquid, and its compact design allows for easy handling by one person and simple mobility. In addition to extending the coolant replacement cycle, it also enhances productivity and quality in cutting and grinding processes, and is effective in preventing coolant corrosion during the summer. *For more details, please download the catalog or feel free to contact us.*

• others

The "Coolant Vacuum Cleaner (Bucket Type) Model VC2" is an air-driven coolant vacuum cleaner equipped with a large bucket that has fine mesh. It sucks up metal shavings accumulated in the tank using a handheld nozzle and collects them in the bucket. The main body is made of transparent acrylic, allowing for easy visibility of the collected amount, and it is also easy to discharge. It does not use non-woven fabric bags, eliminating the need for everyday consumables. Cleaning can be done without draining the coolant, and its compact design makes it easy to handle by one person and easy to move. It effectively extends the coolant replacement cycle, improves quality and productivity, and provides corrosion prevention during the summer months. *For more details, please download the catalog or feel free to contact us.*

• others

The "CJC Filter EP Type" regenerates waste fuel extracted from fuel tanks during automobile dismantling into a state that can be safely reused. Simply filtering gasoline or diesel extracted from the fuel tank with a cloth is insufficient; it is essential to thoroughly remove debris from tank drilling, moisture, rust, and fine impurities. The "CJC Filter EP Type," with its high filtration precision, effectively captures and removes these impurities, allowing gasoline and diesel to be safely used as regenerated fuel. *For more details, please download the materials or feel free to contact us.*

• others

The "CJC Filter BG Type" maintains the lubricating oil in the gearbox at a level equivalent to new oil, bringing bearing-related troubles in wind turbines close to zero. Needless to say, wind turbines generate profits when they are operational. Conversely, downtime due to troubles means significant losses. It is said that as much as 80% of wind turbine issues are caused by lubricating oil, making oil management essential for the stable operation of wind power generators. The "CJC Filter BG Type" is a high-performance filter that astonishingly removes impurities, wear particles, and moisture generated within the gearbox, ensuring that the lubricating oil is always maintained at a level equivalent to new oil. It is standardly adopted in wind turbines worldwide, with over 80,000 units currently in operation. *For more details, please download the catalog or feel free to contact us.*

• others

The "AL Automatic Backwash Filter" is a filter for diesel engine lubricating oil that employs an automatic backwash method. It automatically backwashes the filter using an air cylinder drive, reversing the flow of oil to eliminate clogging. This keeps the lubricating oil in a constantly clean state, contributing to stable engine operation and reduced maintenance. The filter element features a highly durable structure with stainless steel wire wrapped around a core. It can be cleaned and reused, and the filtration precision can be selected according to the application. Additionally, its design allows for easy open inspection, making it a product with excellent maintenance characteristics. *For more details, please download the catalog or feel free to contact us.*

• others

"Magnetic horsepower" is a device that changes the properties of water through the action of powerful magnets, preventing the attachment of marine organisms. By installing it in seawater pipes, such as those before the engine's L.O. cooler, it helps suppress the attachment of shells, the formation of scale, and rust, thereby reducing maintenance costs during dock time. Furthermore, it is expected to improve engine fuel efficiency and operational efficiency. *For more details, please download the catalog or feel free to contact us.*

• others

The "Evaporator ES Type" is a device that distills waste liquid as much as possible to recover valuable materials from it. It adopts a heat pump cycle, allowing for energy-efficient processing with minimal heat input. The distilled water can be reused as industrial water, and by combining it with the "Centrifugal Oil Separator WF Type" or "UQ Filter" in the later stages, the water quality can be further improved, making it possible to discharge into sewage systems. *For more details, please download the catalog or feel free to contact us.

• others