FCR List of Products and Services

The "Ichikoro Partition" is a product that has been treated with antiviral and antibacterial processing. *It is not effective against all viruses and bacteria. The effect lasts for about one year. The panel size is 600mm wide × 600mm high × 120mm deep, with a thickness of 3mm. There is a 1cm gap at the bottom of the panel, allowing documents to pass through. Additionally, we offer a "Maintenance Kit" for those who wish to apply antiviral processing to acrylic partitions they have already installed, or for maintenance of the Ichikoro Partition after about one year. *For more details, please refer to the PDF document or feel free to contact us. 【Features】 ■ Since it has been treated with antiviral processing, viruses and bacteria are less likely to proliferate on the surface. ■ The effect lasts for about one year. ■ SIAA certification (antiviral and antibacterial) has been obtained. *1 - After 300 cleaning wipes, the active ingredients remained, so it is stated that even with cleaning every other day, the effect lasts for about one year.

• others

The "WB Seal" strongly adheres to wet concrete, mortar, steel plates, and more. It is divided into a main agent and a hardener, which are mixed in a weight ratio of 2:1 at the time of use. It can be used as a sealing material for wet concrete surfaces or as a sealing material for reinforcing steel plate adhesion in leaking tunnel lining concrete. 【Features】 ■ Strong adhesion to wet concrete, mortar, steel plates, etc. ■ Excellent durability and water resistance ■ Divided into a main agent and a hardener, mixed in a weight ratio of 2:1 at the time of use ■ Appearance characteristics - Main agent: white paste-like - Hardener: gray paste-like *For more details, please refer to the PDF document or feel free to contact us.

• glue

"WB Grout" hardens by replacing water underwater and strongly adheres to concrete, mortar, and steel materials. Due to its low viscosity, it can be injected into the fine details of damp cracks. It has excellent durability and water resistance, making it suitable for use as an injection adhesive in post-installed anchors when moisture or water accumulation in the drilled hole is unavoidable, as well as for injecting materials into cracks in concrete that are damp or have water accumulation. [Features] - Hardens by replacing water underwater - Strongly adheres to concrete, mortar, and steel materials - Excellent durability and water resistance - Composed of a main agent and a hardener that are mixed together at the time of use *For more details, please refer to the PDF document or feel free to contact us.

• glue

Silicone #70 is a two-component silicone-based sealing material with excellent weather resistance, equivalent to JISA 5758 durability category 10030. Compared to polyurethane and polysulfide sealing materials, its heat resistance, cold resistance, water resistance, and fatigue resistance are exceptionally stable. This product comes as a set of base agent, color master, and hardener, which are mixed together during use. The mixing ratio is 93 parts base agent, 7 parts color master, and 3 parts hardener by weight. 【Features】 ■ Extremely excellent weather resistance in a two-component form ■ Equivalent to JISA 5758 durability category 10030 ■ Exceptional stability in heat resistance, cold resistance, water resistance, and fatigue resistance ■ Appearance is a grease-like consistency in black or gray *For more details, please refer to the PDF document or feel free to contact us.

• Joint material

"Silicate Guard" is a silicate-based surface impregnation material that is simply applied or sprayed onto concrete surfaces. It reacts with the reaction accelerators and calcium hydroxide in the concrete to densify the concrete surface, prevent deterioration, and improve abrasion resistance. The standard application amount is 0.25 kg/m². Check the dryness of the surface at the application site and use a roller or sprayer for impregnation. 【Features】 ■ Simple application or spraying work ■ Densifies the concrete surface ■ Standard application amount is 0.25 kg/m² ■ Two-component mixed type *For more details, please refer to the PDF document or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material

The "News Pangard Series" is a one-component reactive silane-based surface impregnation material that can be applied simply with a brush or similar tool. It penetrates from the surface of the concrete to the interior, forming a protective layer of silicone polymer that prevents water permeability and absorption, thereby protecting the rebar. Additionally, the protective layer that penetrates into the concrete has long-term durability, with over 20 years of durability confirmed in actual structures. 【Features】 ■ Easy to work with ■ Forms a protective layer of silicone polymer ■ Prevents water permeability and absorption, protecting rebar ■ Prevents the intrusion of salts, protecting structures from salt damage ■ Has long-term durability *For more details, please refer to the PDF materials or feel free to contact us.

• Coating film waterproofing material/permeable waterproofing material

"Showbond Grout" is a two-component epoxy resin adhesive with strong bonding power, designed for civil engineering and construction injection applications. It is used for embedding and bonding rebar and anchor bolts, as well as preventing deterioration and spalling due to weathering seen in scenic rocks. Additionally, it has been used for many years as an injection adhesive in steel plate bonding methods for floor slab reinforcement and vertical girder addition reinforcement methods, and is well-regarded for its adhesive properties and integration with floor slabs. 【Features】 ■ Integrates structures due to the strong adhesive power unique to epoxy resin ■ No curing shrinkage and possesses moderate flexibility ■ Adapts to some external forces, impacts, and vibrations ■ Excellent durability with extremely stable conditions after curing *For more details, please refer to the PDF document or feel free to contact us.

• glue

"Showbond Anchor Lock" is an epoxy resin-based adhesive designed for post-installed anchor fixation on wet surfaces. It eliminates the need for sealing work for downward and horizontal post-installed anchor fixation. It adheres strongly even when the borehole is wet. Additionally, this product comes in two types: Winter (W) for use in conditions between 5°C and below 20°C, and Summer (S) for use above 15°C. 【Usage Instructions】 ■ The main agent and hardener are separated and must be mixed together before use. ■ The mixing ratio of the main agent to hardener is 7:3 by weight (for small amounts, always measure with a scale). ■ Use an electric stirrer to mix until there are no color variations, ensuring the main agent and hardener are completely combined. ■ Since it begins to harden gradually after mixing, check the usable time and use it within that timeframe. ■ Remove any resin that has adhered to tools or equipment before it hardens. *For more details, please refer to the PDF document or feel free to contact us.

• glue

The "Showbond #202 Series" is a solvent-free, two-component mixed epoxy resin adhesive that exhibits strong adhesion and waterproof properties. There are four types available, tailored to different types of concrete and effective pouring times. It has a wide range of applications, including jointing and raising of foundation concrete, raising of shoulders due to pavement improvements, widening of bridge abutments, embankments, tidal levees, spillways, and jointing and raising of dam aprons. 【Features】 ■ #202JT - For jointing and raising new and old concrete for ultra-rapid hardening concrete - Suitable for wet surfaces - Effective pouring time: within 60 minutes at 20°C (not usable if temperature exceeds 25°C) ■ #202 - Used for pouring Portland cement concrete and mortar - Effective pouring time: within 3 hours at 20°C *For more details, please refer to the PDF document or feel free to contact us.

• glue

"Showbond #101" is a two-component epoxy resin adhesive with excellent properties such as strong adhesion, abrasion resistance, and chemical resistance. It is specially formulated in a paste-like consistency and concrete color to be suitable for bonding, filling, and troweling that require thickness. It has a wide range of applications in civil engineering and construction, including the installation of boundary blocks, adhesion of drainage blocks, joining of flue pipes, and adhesion of exterior wall tiles. 【Features】 ■ Excellent properties such as strong adhesion, abrasion resistance, and chemical resistance ■ Two-component type ■ Formulated in a paste-like consistency and concrete color ■ Wide range of applications including joining of flue pipes and adhesion of exterior wall tiles *For more details, please refer to the PDF document or feel free to contact us.

• glue

The "Dust Control Pole for Construction Sites" is a device that allows you to easily attach a cover to smoke detectors at high locations with just one touch. It eliminates the need for ladders or scaffolding for dust control work up to approximately 5.3 meters high, making it safer and easier compared to traditional methods. The handle is a telescopic pole, and the product is compact (about 1.5 meters) for transportation. 【Features】 ■ Prevents false alarms from smoke detectors ■ No need for ladders or scaffolding for dust control work up to approximately 5.3 meters ■ The handle is a telescopic pole, compact (about 1.5 meters) for transportation ■ Easy one-touch attachment of a rubberized vinyl cover (Bellicover No. 3) ■ Simple and reliable * For more details, please refer to the related links or feel free to contact us. * You can view videos of "Construction Examples at JR Ryogoku Station," "Product Description," and "Usage Manual" from the related links.

• Work tools
• Work tools

The "Pole Dancer System" is a coating system for corrosion protection at the ground level and base that can be applied even on damp surfaces. It excels in corrosion resistance for both steel and concrete surfaces, and due to its high crack-following ability of 4.1mm (putty area) and 0.3mm (general area), it suppresses cracking of the coating film caused by vibrations of the coated objects. Furthermore, because the painting intervals are short, it allows for construction in as little as one day. 【Features】 ■ Can be applied on wet surfaces ■ Excellent corrosion resistance ■ Superior crack-following ability ■ Less affected by rain ■ Allows for regulation and shortening of construction periods *For more details, please refer to the related links or feel free to contact us.

• Subsidiary materials

"Mortar Moren" is a horizontal joint material used for seismic reinforcement of elevated bridge columns and similar structures, where reinforcing steel plates are divided horizontally for transportation and installation. It excels in safety and workability, while also achieving shortened construction periods and reduced costs. In addition to the "Mortar Moren" for steel plate thicknesses of 6 and 9 mm, we also offer the "Mortar Moren Wide" for 12, 14, and 16 mm. 【Specifications (partial)】 ■ Material: EPDM sponge ■ Steel plate thickness - Mortar Moren: for 6 and 9 mm - Mortar Moren Wide: for 12, 14, and 16 mm ■ Packaging: 5 rolls of 20m per box *For more details, please refer to the related links or feel free to contact us.

• Earthquake-proof and vibration-damping equipment

"Grass Den Soil" (hardened soil) is a weed prevention product made from cement and fine blast furnace slag as binding materials, with sand soil as the aggregate. By applying water, it achieves a compressive strength of about 5 N/mm². In other words, it is a low-strength mortar that prevents grass from growing, freeing you from the hassle of weeding. It is composed solely of inorganic materials that are born from the earth and return to the earth, making it an environmentally friendly material. 【Features】 ■ No grass growth ■ Excellent permeability ■ Effective in preventing heat islands ■ Easy to apply, just add water ■ Environmentally friendly quality *For more details, please refer to the related links or feel free to contact us.

• Paving Materials

The "SSI Method" is a salt damage prevention technique developed jointly by the Railway Technical Research Institute and the former Japan Highway Public Corporation's Testing Research Institute. By utilizing a "salt-adsorbing agent" that directly acts on the salt content in concrete, it fundamentally and long-term suppresses salt damage. It is composed of polymer-cement-based materials that are of the same quality as the structure, making it effective for macrocell corrosion prevention after partial cross-section repair, and achieving high durability. 【Features】 ■ Adsorbs salt present in the residual rust layer on the surface of rebar ■ Reduces salt content in the concrete structure surrounding the rebar surface ■ Composed of polymer-cement-based materials of the same quality as the structure ■ Effective for macrocell corrosion prevention after partial cross-section repair ■ Achieves high durability

• Civil Engineering Method

The "FCR IB-M Joint Method" is a joint repair method that prevents water leakage from the joints of open channels. A rubber sheet laminated with special fibers is installed at the joint to stop the water. It can accommodate differences in elevation and openings in the channel, and it follows the displacement of the open channel after construction, maintaining sufficient water-stopping performance. *For more details, please download the PDF or feel free to contact us.*

• others

The FCR waterway regeneration mortar lining method involves applying a highly durable polymer cement mortar to the surface of concrete waterways that have been worn or eroded, aiming to restore and enhance functions such as smoothness and water tightness. *For more details, please download the PDF or feel free to contact us.*

• others

The FCR Construction Method Association has prepared the "FCR Intermediate Pushing Method," which allows for pushing to the area of deformation without using the full line pushing method in cases where the deformation of the buried pipe is due to localized blockage. This method involves aligning the pushing steel pipe with the existing buried pipe and connecting them for repairs. *For more details, please download the PDF or feel free to contact us.*

• others

When conducting an investigation of railway drainage facilities (fukubi, fusebi, fukeburi), if there are significant deformations and a risk of subsidence, prompt FCR emergency measures will be taken. Water flow will be secured to prevent track bed subsidence. Due to the compact nature of the repair equipment, repairs can be made in any location. *For more details, please download the PDF or feel free to contact us.*

• Renovation and repair methods

The FCR IN joint method is an internal band method that repairs the opened sections of pipe joints from the inside due to aging changes. *For more details, please download the PDF or feel free to contact us.*

• others

The FCR liner method was aimed at drainage systems for railways (culverts, inverted siphons, and drainage ditches) up to Φ750, which account for 95% of such systems. However, there are some culverts and bridges on the Shinkansen and conventional lines with larger pipe diameters, and issues with these culverts and bridges could lead to major accidents. We have developed the "FCR liner method (large diameter compatible)" that can repair large diameter culverts and bridges. *For more details, please download the PDF or feel free to contact us.

• Renovation and repair methods

In cases where there is inflow, leakage, or deformation in the drainage pipes of sections that can only afford a few hours of track closure within urban station premises, it was difficult to complete repairs in a short time. We have developed the "FCR Liner Method (short curing type)" that allows for repairs to be completed quickly. *For more details, please download the PDF or feel free to contact us.

• Renovation and repair methods

The FCR Method Association uses the FCR Liner Method (standard type) for repairs of drainage facilities (flumes, flaps, and troughs) based on the conditions of camera inspections. The development of a dedicated repair method for flumes has resolved issues associated with traditional repairs that directly utilized methods designed for sewer systems. This allows for the repair of damaged flumes, stopping the inflow of soil and preventing the occurrence of subsidence accidents. *For more details, please download the PDF or feel free to contact us.*

• Renovation and repair methods

Due to the expansion of single-track lines to double-track lines and the construction of roads parallel to the railway, numerous railway drainage systems (such as inverted siphons and inverted pipes) with different diameters on the left and right sides have been installed. In conventional methods, the lining was adjusted to fit the smaller diameter, and mortar was injected into the gaps to complete the work. We have developed the "FCR Liner Method (for different diameters)" that allows for repairs of inverted siphons with different diameters without changing their original size. *For more details, please download the PDF or feel free to contact us.

• Renovation and repair methods

The FCR Construction Method Association conducts camera inspections of the narrowed-down drainage facilities (fusebi, fusebi, and fushibi) identified through the primary investigation of railway drainage systems, either after dredging or in their current state, using dedicated inspection equipment for fusebi. The development of the dedicated FCR mobile self-propelled cameras "PV-1560J, 2500J, 2100J" and push-type cameras "PV-730J, PV-1500J" has resolved the issues that arose from using sewer inspection cameras as they were. *For more details, please download the PDF or feel free to contact us.*

• others

If construction vehicles can approach within 300 meters of the railway drainage pipe facilities (including the inlet, outlet, and downspout) that need repair, it can be carried out using the FCR liner method (standard type). However, if they cannot approach within 300 meters, extensive preliminary preparations such as the installation of temporary roads must be made to carry out the work. We have developed the "FCR liner method (remote response, quick curing type)" that can be used for repairs even when construction vehicles cannot get within 300 meters. *For more details, please download the PDF or feel free to contact us.

• Renovation and repair methods

The FCR Construction Method Association conducts various projects related to pipeline and waterway systems, including repairs of drainage pipes within vehicle centers and vehicle factories, repairs of drainage pipes within station premises, repairs of drainage pipes in tunnels, detection of voids under railway tracks, dredging, investigation, and repair of center drains, repairs of water supply pipes, repairs of waterway bottom slabs, repairs of leaks in open channels, joint repairs, various pit dredging, and dredging, investigation, and repair of conduits for power supply, distribution, signaling, and communication cables. Here are some examples of our work. *For more details, please download the PDF or feel free to contact us.*

• Renovation and repair methods

The FCR3S segment method does not require large machinery and enables the repair of large-diameter buried pipes and bridges in small spaces. *For more details, please download the PDF or feel free to contact us.*

• Renovation and repair methods

If repairs are to be made to damaged linings based on the conditions of the camera survey, we will use the "FCR Glass Liner Method." The development of a specialized method for lining repairs has resolved issues associated with traditional repairs that directly utilized methods for sewer systems. We will repair the damaged linings, stop the inflow of soil, and prevent the occurrence of subsidence accidents. *For more details, please download the PDF or feel free to contact us.*

• Renovation and repair methods

The FCR Method Association has developed the "FCR Internal Pressure Liner Method," which allows for repairs corresponding to damage or deterioration when there is leakage or deformation in the internal pressure pipes of water supply pipes laid in railway facilities, power plants, snow melting equipment, etc., through pipeline investigations (corrosion investigations, leakage history investigations, etc.). *For more details, please download the PDF or feel free to contact us.*

• Renovation and repair methods

The FCR Method Association has established the "Fubi Course," where Grandpa Fubi teaches the basics of railway drainage systems (Fubi, Fusebi, Fubiki). He explains investigation and repair methods in an easy-to-understand manner. According to Grandpa Fubi, "I am the cross pipe laid under the tracks to carry agricultural water when the railway was constructed. In my younger days, I supported heavy vehicles and tracks from beneath, but as I aged, I started causing trouble by getting clogged or creating large holes beside the tracks. However, thanks to the FCR method, I have been able to rejuvenate remarkably." *For more details, please download the PDF or feel free to contact us.*

• Special Construction Method

The FCR construction method association uses the FCR thrust construction method for railway drainage facilities (such as buried drains, buried pipes, and buried gutters) that are severely damaged and cannot be repaired. The FCR thrust construction method has been improved from existing methods, fully considering the characteristics of buried drains, with the highest priority placed on safe construction. *For more details, please download the PDF or feel free to contact us.*

• Renovation and repair methods

In Nagai City, Yamagata Prefecture, which flourished as a port town for the Mogami River shipping during the Yonezawa Domain era, the tourist exchange center "Michi no Eki Kawa no Minato Nagai" opened in April 2017. We received a request for construction to ensure that customers can use the facilities with peace of mind. We conducted spot coating on high-frequency contact surfaces such as the ticket vending machines, tables, and chairs in the restaurant area, as well as the sales counters in the local specialty product area, the facilities in the 24-hour accessible restrooms, and vending machines. [Examples of areas treated] ■ Restaurant tables and chairs ■ 24-hour accessible areas ■ Washrooms ■ Toilet stalls ■ Multipurpose restrooms ■ Infant care rooms *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce a case of antiviral and antibacterial coating conducted at Aomori Akinohoshi Junior High and High School in Aomori City. This was implemented under the policy of wanting to provide peace of mind not only to current students but also to visitors due to entrance exams. The coating was applied to the school bus, as well as the health room and restrooms, and an A3 method inspection was conducted to check the cleanliness before and after the application. 【Areas of Application】 ■ School Bus ■ Health Room ■ Restroom Stalls *For more details, please refer to the PDF document or feel free to contact us.

• others

We would like to introduce a case study of antiviral and antibacterial coating carried out at the accommodation facilities of Suzuki Shokai. We received a request for the work to ensure that customers can visit and stay with peace of mind. After surveying all the relevant facilities, we determined the targets and the scope of the work. We also scheduled the work to avoid inconveniencing guests staying at the facility. 【Examples of Work (Excerpt)】 ■ Lobby ■ Outside & Inside of Elevators ■ Inside & Outside of Guest Room Door Knobs ■ Banquet Hall ■ Restaurant ■ Changing Room *For more details, please refer to the PDF document or feel free to contact us.

• others

The Kurin Kurin Box utilizes the sterilization effect of ultraviolet lamps, allowing for high-intensity and short-duration disinfection of items inside the box. Installation work such as wiring is unnecessary, and since it lights up inside the device, there is no exposure to ultraviolet light. It is equipped with a safety sensor that turns off the light when the door is opened. * The expected effects are applicable only to surfaces exposed to ultraviolet light. * It does not guarantee effectiveness against all viruses and bacteria. * This product is not a medical device and should not be used for sterilizing or disinfecting medical instruments or treatment tools. FCR Corporation offers a wide range of services including complete spray coating, complete painting, spot coating, spot glass coating, spot film application, and ultraviolet disinfection. * For more details, please download the PDF or feel free to contact us.

• others

FCR Corporation offers a wide range of services including complete coating, complete painting, spot coating, spot glass coating, spot film application, and ultraviolet sterilization. The Kurin Kurin Stand is a sterilization device that suppresses the growth of viruses and bacteria floating in the air through the sterilizing effect of ultraviolet lamps. *It is not effective against all viruses and bacteria. *For more details, please download the PDF or feel free to contact us.

• others

Rikeguard is an antiviral and antibacterial film that can reduce specific viruses on the film surface by 99.99%. Professional installation is possible through the prompt response of association members nationwide. Of course, customers can also apply it themselves. FCR Corporation offers a wide range of services including complete coating, complete painting, spot coating, spot glass coating, spot film application, and UV sterilization. *Note: - It is not effective against all viruses and bacteria. - These are test results from the Japan Quality Assurance Organization (Boken). - The effectiveness is expected to apply to the film surface. - The test results are based on ISO standards: 22196 and 21702. *For more details, please download the PDF or feel free to contact us.

• others

Ichikoro FG is an antiviral and antibacterial coating material that contains titanium dioxide and silver oxide. Titanium dioxide exhibits photocatalytic properties under sunlight or indoor lighting, allowing for rapid antiviral and antibacterial effects. In areas not exposed to light or illumination, silver oxide provides antiviral and antibacterial effects. With antiviral and antibacterial application, the virus count decreases by 99.99% within 4 hours*1. In comparison, while alcohol cleaning has short-term effects, the antiviral and antibacterial application of Ichikoro (F/FG) maintains a safe and secure state for a considerable period*2. Thanks to the prompt response from association members nationwide, professional application can be completed as soon as the day after your order. Additionally, you can choose to perform the application yourself with provided materials. *1 - It does not work against all viruses and bacteria. - The effectiveness varies by solution. - These are test results from Union Biotech Co., Ltd. - The expected effects are applicable to the surface of the coating. - The test results were conducted based on ASTM E1052-20 standards. *2 - This varies depending on each solution, frequency of contact, and cleaning methods.

• others

The "Marugoto Painting (COZY PACK Air)" is a construction method that directly applies an antiviral and antibacterial paint containing titanium dioxide, a photocatalyst, to the surface. Titanium dioxide exhibits photocatalytic properties under sunlight or indoor lighting, allowing for rapid antiviral and antibacterial effects. Professional construction is possible through the prompt response of association members nationwide. *Note that it is not effective against all viruses and bacteria. FCR Corporation offers a wide range of services including complete coating, complete painting, spot coating, spot glass coating, spot film application, and UV sterilization. *For more details, please download the PDF or feel free to contact us.

• others

Ichikoro F is an antiviral and antibacterial coating material developed jointly by FCR Corporation and Dai Nippon Toryo Co., Ltd., which combines titanium dioxide and silver. Titanium dioxide exhibits photocatalytic functions under sunlight or indoor lighting, allowing for rapid antiviral and antibacterial effects. In areas not exposed to light or illumination, silver ions provide antiviral and antibacterial effects. With antiviral and antibacterial application, the virus count decreases by 99.99% in 4 hours*1. In comparison, while the effects of alcohol cleaning are short-term, the antiviral and antibacterial application of Ichikoro F maintains a safe and secure state for about one year*2. *1 - It is not effective against all viruses and bacteria. - The effectiveness varies depending on each solution. - These are test results from the Japan Food Analysis Center. - The expected effectiveness is for the surface of the coating. - These results are based on tests conducted according to JIS R 1756 standards. *2 - It varies depending on each solution, frequency of contact, and cleaning method. - Even after 360 wipe cleanings, the active ingredients remained, suggesting that the effects last for about one year even with daily wipe cleaning.

• others

We facilitate investigations with a dedicated self-propelled camera and a push-type camera. We solve the problems that occurred with sewer inspection cameras, allowing for camera inspections to be conducted either after dredging or in their current state. *For more details, please download the PDF or feel free to contact us.

• others

We facilitate inspections with a dedicated self-propelled camera and a push-type camera. This resolves issues that occurred with sewer inspection cameras, allowing for camera inspections to be conducted either after dredging or in their current state. *For more details, please download the PDF or feel free to contact us.

• others

Silicone adhesive sheets shorten construction periods and ensure long-term reliability during the maintenance and repair of various infrastructures. "Shinetsu Patch Seal" and "Patch Seal Cloth" are suitable for corrosion and waterproofing in the construction and civil engineering fields. *For more details, please download the PDF or feel free to contact us.

• Subsidiary materials
• others

Railway maintenance work dedicated bolt marking spray "Line Marker" Can be used for marking derailment prevention guard fixing bolts, rail fastening hardware bolts, etc. *For more details, please download the PDF or feel free to contact us.

• others