フジモリ産業 List of Products and Services

"AGSR-FI" is a polyurethane foam that cures and expands quickly by mixing polyols and modified isocyanates. It reaches its final strength in a short time, allowing immediate use of the tunnel after construction, and it can cure and expand even underwater, making it usable in spring water environments. By utilizing it as a filling material for back cavities of existing tunnels, it helps restore the structural functions inherent to the tunnel and contributes to the extension of the lifespan of existing tunnels. 【Features】 - It reaches its final strength quickly, allowing immediate use of the tunnel after construction. - It can cure and expand underwater, making it usable in spring water environments. - The foam has independent bubbles, so high water-stopping properties are expected after curing. - Its low foam density means that the load on the lining concrete is minimized. - It complies with the "Guidelines for Safety Management of Polyurethane Injection Materials in Mountain Tunnel Construction." *For more details, please refer to the PDF document or feel free to contact us.

• Tunnel construction
• Tunnel Materials
• Other civil engineering works

The "AGF-Φ Method" is an expanded type of AGF that adopts a "Dedicated Guide Support" with a dedicated guide pipe installed to facilitate the placement of AGF steel pipes for pre-tensioning by drilling holes in the web section of H-shaped steel supports. By using the dedicated guide pipe, the placement of the steel pipes becomes more accurate, improving construction precision. As construction precision improves, it becomes possible to reliably form an arch crown at the tip of the steel pipes, and since the pipes are left in the ground without cutting, there is no industrial waste generated. 【Features】 ■ Improved construction precision ■ Tension reduction effect ■ Reduction of industrial waste ■ Reduced cycle time *For more details, please refer to the PDF materials or feel free to contact us.

• Tunnel construction
• Other civil engineering works
• Civil Engineering Method

"Fujiair Duct M" is a fire-resistant duct coated with special glass fibers on the outside. Despite its thickness of 20mm, it has fire resistance comparable to the commonly used 50mm rock wool insulation. In addition to this, Fujimori Industries also offers non-combustible ducts and sleeves. If you are struggling with selecting materials that comply with fire-related laws and regulations, please feel free to consult us. Furthermore, we have organized a web seminar for house manufacturers! The theme is "Building Disaster-Resistant Homes," which includes not only fire but also earthquakes (damping and seismic resistance) and typhoons, allowing you to efficiently gather information in one go. 【Lecture Content】 ■ Regulations regarding ventilation ducts related to fire ■ Effectiveness of damping and market trends ■ Building disaster-resistant homes with screws ■ Improving seismic resistance using narrow load-bearing walls *If you are interested in our products, please view the catalog available for PDF download. *For information regarding the web seminar, please refer to the materials available for PDF download or feel free to contact s.ishikawa@tanakanet.co.jp.

• Duct related equipment
• Other opening accessories (airtight materials around doors and windows, etc.)

The glass wool insulation material-equipped flexible duct "Fujirex" is a flexible duct with insulation performance. Additionally, it has obtained non-combustibility certification from the Ministry of Land, Infrastructure, Transport and Tourism and is composed of materials that are "not subject to regulations and outside the notification target." Furthermore, since it meets the following standards, it is very effective when the planned building is of "quasi-fire-resistant structure": - The exterior of the duct is covered with rock wool insulation, glass wool insulation, etc. - The exterior of the duct is covered with gypsum board or a steel frame. - The duct itself is made of non-combustible or quasi-non-combustible materials. 【Features】 ■ Insulation performance ■ Certified non-combustible product ■ Does not use any materials containing formaldehyde ■ Length can be set freely up to a standard length of 10m ■ Eliminates the need for cutting on-site, effectively reducing construction time and waste *For more details, please download the materials or feel free to contact us.

• Duct related equipment

Our company is capable of various metal processing. ■ Cutting, notching, and drilling of sheet materials - Thin materials such as sheet metal can be cut and marked using laser irradiation. ■ Cutting, notching, and drilling of square pipes / round pipes / shaped steel Cutting and marking can be done using laser irradiation. (Length up to 12m, round pipes up to Φ400mm, square pipes, and shaped steel up to 300mm x 300mm can be processed) ■ Bending of flat steel materials We can bend unfolded steel plates into the desired shape, including box bending, acute angle bending, and R bending. (Thickness from 0.27mm to 9.0mm, with a maximum length of 12m) We have various examples of patterns in our catalog, so please take a look. * Data from design software such as Illustrator or CAD can be used for input into the equipment. * For more details, please refer to the PDF materials or feel free to contact us.

• others

Fire-resistant and quasi-fire-resistant buildings, as well as sleeves for ventilation in quasi-fire-resistant specifications, require non-combustibility according to laws and related administrative regulations! The "Non-combustible Inclined Sleeve" is an outer penetrating sleeve made of highly corrosion-resistant galvanized steel plate, suitable for areas where non-combustibility is required. It can prevent the intrusion of fire into the wall structure. Additionally, it features a square flange, making installation and waterproofing treatment easy. Furthermore, by incorporating an incline in the main body, it prevents water from entering the indoor side. We also offer non-combustible certified products such as the insulated spiral duct "Fuji Air Duct M" and the flexible duct with glass wool insulation "Fuji Rex." For regulations related to sleeves, please contact us! 【Features】 ■ Can be used in areas requiring non-combustibility ■ Prevents the intrusion of fire into the wall structure ■ Made of highly corrosion-resistant galvanized steel plate ■ Excellent corrosion resistance ■ Accurate and easy waterproofing treatment during installation

• Duct related equipment
• Other opening accessories (airtight materials around doors and windows, etc.)

The "Sheet Gripper" is a non-penetrating rebar support fixture that does not penetrate waterproof sheets. By tightening the rebar, smooth and reliable construction is possible. We offer the "Sheet Grip" for waterproof sheets with a thickness of 0.8mm and the "WT Gripper" for those with a thickness of 2.0mm. 【Features】 ■ NETIS Registration Number: KT-190096-A ■ Non-penetrating, does not penetrate waterproof sheets ■ Smooth and reliable construction is possible by tightening the rebar *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof sheet
• Tunnel Materials
• Tunnel construction

We propose a simple and reliable repair method using a dedicated repair kit from the current "patch" method. The "Almeida Kit" is a waterproof sheet repair kit for tunnels that has low dependence on the skill level of the workers and minimal variation in repair accuracy. Since the repair material adheres fully, the risk of leakage is reduced, ensuring a reliable repair. 【Features】 ■ Low dependence on the skill level of workers ■ Minimal variation in repair accuracy ■ Full adhesion of the repair material ■ Reduced risk of leakage, ensuring reliable repairs *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof sheet
• Tunnel Materials
• Tunnel construction

The "fair-system" is a polyurethane injection machine designed for tunnel auxiliary construction methods that unravels the injection process and leads to improvements in quality and productivity. Using a laptop installed within the injection machine, it automatically generates reports based on the collected data. It assists in the quick and accurate creation of reports, which are output in a clear and easy-to-understand format. Additionally, a management PC is set up at the control station, allowing for the monitoring of injection conditions even outside the tunnel, and injection status can be shared using an internet connection. 【Features】 ■ Easy and effective injection management ■ Appropriate injection management for quality improvement ■ Labor-saving and enhanced construction safety *For more details, please refer to the PDF materials or feel free to contact us.

• Tunnel construction
• Construction and process management software

The "SG Sheet" is a waterproof sheet for tunnels with a composite color structure. The contrast of two colors reduces the risk of water leakage due to damage and contributes to the improvement of tunnel quality. Visibility of damaged areas in the waterproof layer at low-light sites is ensured, improving detection accuracy. 【Features】 ■ NETIS Registration Number: KT-150067-A ■ Composite color structure ■ Reduces the risk of water leakage due to damage ■ Contributes to the improvement of tunnel quality ■ Ensures visibility of damaged areas in the waterproof layer at low-light sites ■ Improves detection accuracy *For more details, please refer to the PDF document or feel free to contact us.

• Waterproof sheet
• Tunnel Materials
• Tunnel construction

The "Filter Sheet Tough" is a permeable formwork sheet that maintains the performance of filter sheets while improving breakage, wrinkles, and color unevenness. It increases breakage strength by 9 times, making it suitable for harsh pouring conditions. With a product width of 2 meters, it can be applied to large formworks. This product can be applied to "large structures" and areas with high pouring pressure, which were difficult to use with conventional materials. 【Features】 ■ NETIS registration number: KT-190066-A ■ Breakage strength increased by 9 times, suitable for harsh pouring conditions ■ Product width of 2 meters allows application to large formworks ■ Processed with special materials that have uniform permeability to suppress color unevenness ■ Applicable to "large structures" and areas with high pouring pressure *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials
• Safety and consumables

The "Non-combustible Inclined Sleeve" is an external through sleeve made of high corrosion-resistant galvanized steel plate, suitable for areas where non-combustibility is required. It can prevent the intrusion of fire into the wall structure. Additionally, it features a square flange, making installation and waterproofing treatment easy. Furthermore, by incorporating an incline in the main body, it prevents water from entering the indoor side. We also offer "Fujia Duct M" and "FADM Sleeve," which comply with fire prevention regulations for kitchen exhaust applications and are certified by fire safety evaluations. For regulations related to sleeves, please contact us! 【Features】 ■ Can be used in areas where non-combustibility is required ■ Prevents the intrusion of fire into the wall structure ■ Made of high corrosion-resistant galvanized steel plate ■ Excellent corrosion resistance ■ Accurate and easy waterproofing treatment during installation

• Duct related equipment
• Other opening accessories (airtight materials around doors and windows, etc.)

The "Non-combustible Inclined Sleeve" is an external through sleeve made of high corrosion-resistant galvanized steel plate. It has a square flange, making it easy to install and waterproof, and the inclination of the main body prevents water from entering the indoor side from inside the sleeve. Additionally, it can be used in areas where non-combustibility is required, an important performance requirement for buildings, preventing the spread of fire into the wall structure. We also offer the "Fuji Air Duct M," which is a "fire department approved product" that can be used without issues even in narrow attics. 【Features】 ■ Can be used in areas where non-combustibility is required ■ Prevents the spread of fire into the wall structure ■ Made of high corrosion-resistant galvanized steel plate ■ Excellent corrosion resistance ■ Accurate and easy waterproofing during installation *For more details, please refer to the PDF materials or feel free to contact us.

• Duct related equipment
• Other opening accessories (airtight materials around doors and windows, etc.)

The "Water Retention Pack Panel" simultaneously performs water retention curing and thermal insulation curing in concrete construction, effectively suppressing drying shrinkage and temperature cracking of concrete structures, making it suitable for constructing high-quality, long-lasting structures. By implementing water retention and thermal insulation at the same time, it is possible to shorten the traditionally separate processes into one. Additionally, the product can be directly adhered to the structure, making it adaptable to various construction surfaces such as vertical surfaces, back surfaces, and curved surfaces. 【Features】 ■ NETIS Number: KT-200018-A ■ High thermal insulation and moisture retention performance (integrated water retention and thermal insulation curing) ■ Can be adhered to the structure ■ Uses insulation material in the thermal insulation layer, making it suitable for regions with significant temperature differences ■ Eliminates the need for water supply and sprinkling processes, achieving labor-saving and unmanned curing ■ Reduces processes, CO2 emissions, and energy consumption *For more details, please refer to the PDF document or feel free to contact us.

• panel
• Waterproof tape, adhesive, drain, protective panel
• Concrete curing material

"F-TAQ" is a lightweight, high-insulation duct handled by Fujimori Sangyo Co., Ltd. It uses a lightweight and highly insulated board made with isocyanurate foam as the core material and resin-reinforced aluminum foil as the facing material. This board has received non-combustible material certification from the Minister of Land, Infrastructure, Transport and Tourism, and can be cut and assembled into square ducts. Additionally, since the board itself serves as insulation material, it simplifies the insulation process and excels in design. [Features] ■ Lightweight ■ Labor-saving ■ High insulation performance ■ Achieves moisture resistance *For more details, please refer to the PDF document or feel free to contact us.

• Duct related equipment
• Ventilation and smoke exhaust equipment
• Piping Equipment

The "F-ONE Turtle" is a round branch chamber that helps streamline ductwork for general air conditioning and shorten construction time. Thanks to its one-touch connection structure, duct connections are easy and require no tools. It adopts a unit construction method, allowing for a highly flexible layout. With its unique rectifying structure, it excels in airflow balance performance, minimizes pressure loss, and demonstrates outstanding air delivery efficiency. 【Features】 ■ Duct connections are easy for anyone with a one-touch system ■ Airflow balance within ±10% (Model: TCK6-1735) ■ Sufficient airtightness at the connection points ■ Can be supported with a three-point suspension *For more details, please refer to the documentation. Feel free to contact us with any inquiries.

• Duct related equipment
• Ventilation and smoke exhaust equipment
• Piping Equipment

Our company is engaged in the building materials business, civil engineering business, chemical products business, and international business. We offer a lineup of building and air conditioning materials with excellent functions such as insulation, lightweight, and ease of construction! Introducing our building materials products used in elderly care facilities! 【List of Featured Products】 ■ Spiral Duct ■ Fujiflex ■ Floor Heating Heat Plus ■ Opening Reinforcement (Floor) Selbon ■ Window Film *For more details, please refer to the PDF materials or feel free to contact us.

• Other civil engineering works
• Piping and insulation
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Our company is engaged in the building materials business, civil engineering business, chemical products business, and international business. Reducing construction time is a major challenge for the construction of large-scale logistics facilities, and we offer a lineup of structural products and air conditioning materials! Here are our building materials used in large projects such as logistics facilities! 【List of Featured Products】 ■ Spiral Duct ■ Column PCa ■ Waist Wall PCa ■ Shim Lock ■ Fujiflex ■ Top Light ■ Solar Master・Grid Green *For more details, please refer to the PDF materials or feel free to contact us.

• Other civil engineering works
• Piping and insulation
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Our company is engaged in the building materials business, civil engineering business, chemical products business, and international business. We provide construction and air conditioning materials with excellent functions such as thermal insulation, lightweight, and ease of installation. We offer a lineup of unsung heroes that support the creation of comfortable environments while keeping construction time and costs down! Here are our building material products used in rental apartments! 【List of Featured Products】 ■ Fuji Air Duct M Type ■ Fuji Flex ■ Rotating Flexible Duct ■ FADM Sleeve ■ Protective Materials ■ Floor Heating Heat Plus ■ Wooden Structure Damper ■ Spiral Duct *For more details, please refer to the PDF materials or feel free to contact us.

• Other civil engineering works
• Piping and insulation
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Our company is engaged in the building materials business, civil engineering business, chemical products business, and international business. We provide materials that contribute to short construction periods and low costs for air conditioning materials, structural materials, and temporary materials used in condominiums. Here are our building material products used in condominiums! 【List of Featured Products】 ■ Fuji Air Duct M Type ■ Fuji Flex ■ FL Poid Slab ■ Underfloor and Balcony PCa (Floor Attached) ■ Underfloor and Balcony PCa (Nose End) ■ Floor Heating Heat Plus ■ Opening Reinforcement (Floor) Cell Bon ■ Spiral Duct *For more details, please refer to the PDF document or feel free to contact us.

• Other civil engineering works
• Piping and insulation
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Our company is engaged in the building materials business, civil engineering business, chemical products business, and international business. We provide construction and air conditioning materials with excellent functions such as insulation, lightweight, and ease of installation. We offer a lineup of products that support the creation of comfortable environments while keeping construction periods and costs down! Here are our building material products used in single-family homes! 【List of Featured Products】 ■ Spiral Duct ■ Fuji Air Duct Type M ■ Fuji Flex ■ Rotating Flexible Duct ■ FADM Sleeve ■ Protective Materials ■ Floor Heating Heat Plus ■ Wooden Structure Dampers *For more details, please refer to the PDF materials or feel free to contact us.

• Other civil engineering works
• Piping and insulation
• Solar mounting brackets and fittings (solar fittings and protective sheets)

Our company is engaged in the building materials business, civil engineering business, chemical products business, and international business. We offer excellent air conditioning, structural, and temporary materials that contribute to short construction periods and low costs, focusing on insulation, lightweight, and ease of installation! Here are our building material products used in office buildings! 【List of Featured Products】 ■ High Stack Chimney ■ Snake Duct Method ■ Turtle Chamber Method ■ Fuji Tuned Duct ■ Non-Nen Fabric Duct ■ Gallery Chamber Box ■ Air Supply Box ■ Marcus Sliding Door ■ Spiral Duct ■ Fuji Flex *For more details, please refer to the PDF materials or feel free to contact us.

• Other civil engineering works
• Piping and insulation
• Solar mounting brackets and fittings (solar fittings and protective sheets)

"Sebirex" is a flexible duct with a special reinforcement treatment and a "fin" for hanging. It has minimal deflection after installation and suppresses pressure loss. Installation can be easily performed without the need for hanging bands. 【Features】 ■ Effective against deflection and deformation ■ Prevents local crushing of insulation covering ■ The fin comes with φ10 eyelets ■ Wire and crimping tools are also available *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Duct related equipment
• Ventilation and smoke exhaust equipment
• Piping Equipment

The "Turtle Chamber" is a round branching chamber box that excels in airflow balance performance due to its unique rectifying structure. It minimizes pressure loss and demonstrates outstanding air supply efficiency, while also adopting a unit construction method that allows for a highly flexible layout. 【Features】 ■ Uniform airflow due to unique structure ■ Excellent airflow balance performance even when the cap is closed ■ Airflow balance within ±10% (internal standard) ■ Can be supported by three hanging points *Pressure loss data is included in the product catalog. (Pressure loss data for each standard product is also available. Please feel free to inquire.)

• Duct related equipment
• Ventilation and smoke exhaust equipment
• Piping Equipment

The non-combustible sock duct for air conditioning, "Nonnen Fabric Duct," combines safety and design, allowing you to use it with confidence in various settings. It provides low airflow sensation and is suitable for any construction scale. It can be printed with colors, patterns, text, and images, making it usable as an advertising medium while softening the presence of the duct. The Nonnen Fabric Duct can be cleaned with a vacuum cleaner. 【Features】 ○ Low airflow sensation ○ Non-combustible certification obtained ○ Excellent design ○ Usable as an advertising medium For more details, please contact us or download the catalog.

• Ventilation and smoke exhaust equipment
• Prefab

This is a groundbreaking product developed to solve the conventional construction process of dam holes (formwork production, reinforcement, curing, and formwork removal) with a single component. The internal rebar slides, allowing for the necessary openings during work. By unitizing the slide reinforcement box (which provides reliable reinforcement without the need for internal reinforcement), we can reduce various work processes. 【Features】 - Environmental Measures: Conventional methods require the installation of formwork at temporary openings, which ultimately becomes waste. The Selbon incorporates a rebar mesh formwork, eliminating the need for disposal. - Simplification of Processes: Carpentry work (formwork creation, installation, and removal), rebar work (reinforcement around openings), and metalwork (reinforcement within openings) are unnecessary, significantly shortening construction time. - Total Cost Reduction: The elimination of formwork, rebar, and metalwork reduces costs. ■ For detailed inquiries, please contact ■ Fujimori Sangyo Co., Ltd. Housing Materials Division Phone number: 03-6840-3125

• Special function opening

As the demand for renewable energy expands, Fujimori Industries has quickly constructed solar power generation facilities in Kakegawa City, Shizuoka Prefecture. Here are the foundations and frames that are optimal for the construction of solar power generation facilities that have undergone demonstration experiments. ■ Foundations for solar panels (can be applied in locations where pile construction is difficult due to geological conditions and soil laws) - Precast concrete foundations: A simple assembly type that does not require crane work on-site. - Spiral foundations: A foundation that uses large-diameter spiral pipes as the base, allowing for concrete placement. It can be used as formwork material and does not require demolding, contributing to reduced construction time and costs. ■ Frames for solar panels (high corrosion-resistant galvanized steel for versatility and aluminum for salt damage measures/lightweight) - Steel frames: Customizable to allow planning without restrictions on regional conditions, dimensions, angles, or ground height. - Aluminum frames: The lightweight nature of the base material, combined with factory assembly of bolt fastening parts, makes on-site construction easy. ■ Other options Weed control sheets: High-performance weed control sheets with a rich lineup of various thicknesses and weights for both exposed and buried types. *For more details, please download the catalog or feel free to contact us.

• Other civil engineering works
• Piles, caissons, sheet piles
• Pile and foundation work

Fujimori Sangyo Co., Ltd. will expand its business with a focus on the sale of materials related to renewable energy-related projects. As the first step, we have implemented the construction of solar power generation facilities in cooperation with Fujimori Kogyo Co., Ltd. at the Kakegawa office. The "Fujimori Sangyo Kakegawa Management & Open Site" has been established with the aim of accurately providing customers with information regarding products, technology, and construction by building a power plant that combines demonstration tests and site visits ahead of material sales. The interconnection with Chubu Electric Power has also been completed, and sales of foundation and mounting products have begun. 【Site Overview】 ○ Power Plant Name: Fujimori Sangyo Kakegawa Management & Open Site ○ Equipment Capacity → Solar Cells: 4,710 Sharp NU-250KA panels, 1,177 kW → PSC Capacity: 2 units from Hitachi, (500/490) 990 kW → Equipment Utilization Rate: 15.4% ○ EPC: NTT Facilities Tokai Co., Ltd. ○ Estimated Annual Power Generation (First Year): 1,337,100 kWh/year ○ Power Generation Start: From July 1, interconnection with Chubu Electric Power begins For more details, please contact us or download the catalog.

• Harbor Construction
• Power generation facilities
• Other civil engineering works

The "Fuji Spiral" with ribs for solar battery foundations significantly improves construction speed as it eliminates the need for on-site concrete formwork assembly and removal. The spiral foundation formwork is cut to the specified length at the factory, so it only needs to be installed on-site. Additionally, if the rebar is modularized, on-site work can be further shortened. 【Features】 - Installation is very easy as there is no need for embedding or excavation. - The circular foundation enhances aesthetics regardless of the type of mounting frame. - Made of Galvalume steel, it has excellent weather resistance. For more details, please contact us or download the catalog.

• Harbor Construction
• Power generation facilities
• Other civil engineering works

Reduce electricity usage and generate electricity from renewable energy. Various initiatives aimed at considering the global environment are being advanced. Among them, Fujimori Sangyo Co., Ltd. has arrived at the choice of "not using electricity for daytime lighting." It cuts ultraviolet and infrared rays from the infinitely pouring sunlight and guides only its blessings indoors. The zero-energy solar lighting system "SolaMaster" is not only eco-friendly lighting but also a healthy lighting solution that is gentle on the human eye and helps maintain the body's balance. 【Features】 ○ Zero Energy → CO2 reduction, power outage measures, energy saving ○ UV and infrared cut → Health management, reduced air conditioning load, preservation management (prevention of deterioration) ○ Uniform light distribution → Safety, improved work efficiency For more details, please contact us or download the catalog.

• Special lighting

Features - Since it is securely crimped, there is almost no air leakage from the straight pipe itself, and because the pipe wall is thin and lightweight, transportation costs, installation material costs, and construction costs can be significantly reduced. - The standard length is 4 meters, but we can cut it to size according to your request. - Since the straight pipes and fittings are manufactured in the factory, they are of high quality and ensure reliable assembly during installation. - You can freely select the material according to your intended use.

• Ventilation and smoke exhaust equipment
• Water and sewerage pipe fittings
• Prefab

This is a duct silencer that can significantly reduce noise transmitted indoors through ducts from range hoods in multi-family housing located in areas with high external noise (such as railways and roads). It is effective across a wide frequency range from low to high frequencies. Despite having high sound reduction performance, it features a compact size structure, allowing for effective use of the available space within the ceiling. Additionally, it can minimize pressure loss to the utmost extent, ensuring the maintenance of range airflow.

• Duct related equipment

"Heat Plus" is an infrared film heating system that uses a surface heating element with a full carbon coating method. Because it heats up over the entire surface, it warms up quickly, allowing you to feel the warmth in about 10 minutes, with no temperature unevenness. Additionally, since it uses far infrared rays, the warmth lasts for a long time. 【Features of "Heat Plus"】 ■ Can be cut to fit the installation location, allowing for flexible installation ■ 10-year warranty! Strong against wrinkles and impacts, with excellent durability ■ Stable temperature distribution even in small areas due to full carbon coating ■ Quick heating with a full surface heating system, reducing electricity costs ■ Short installation time of about 2 hours for an area of 6 tatami mats ━━ Free sample of "Heat Plus" cut! ━━━━━━━━ If you would like a sample, please contact us using the "Contact" link below! * Limited to 100 companies, so please apply early. ━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━━ You can view installation examples and guidelines for free from the "Download" link below. Please be sure to use it along with the product catalog!

• Flooring materials compatible with underfloor heating

To enhance the strength of the spiral duct made of galvanized steel sheets, ribs have been added, achieving a very high strength against concrete pouring and underground burial while maintaining a slim profile. Additionally, the products will be cut to the specified dimensions at the factory, eliminating the need for cutting work on-site.

• Solar mounting brackets and fittings (solar fittings and protective sheets)
• Steel structure construction
• Foundation construction

We achieve the performance that could not be secured with sliding doors at openings of spaces requiring airtightness, sound insulation, and shielding through our unique sliding mechanism. The floor is free of rails and steps, accommodating barrier-free access. Automatic doors are also possible. We can accommodate large openings (25m², under 1000 kg). We ensure airtightness grade A-4 and sound insulation performance T-3.

• Steel Door
• Clean Room
• Sliding door

Grid Green is a solar power utilization system that optimizes lighting by harnessing sunlight to reduce electricity consumption, offering a quick return on investment. It continuously monitors the direction and intensity of sunlight and reflections to adjust indoor lighting. Since it communicates over existing power lines, no new wiring in the attic is required. This system utilizes the blessings of nature to achieve both visualization and energy conservation simultaneously. For more details, please contact us or refer to the catalog.

• Roof and gutter construction

- The void slab construction method reduces the weight of the structure and ensures a clean space without beams. Additionally, it provides excellent sound insulation performance due to its high rigidity. - The half PCa method "Silent Void Slab" addresses the shortage of skilled workers and shortens construction periods. Being an industrialized product, it ensures high quality. 【Features】 ■ Excellent weight and lightweight floor impact sound insulation performance ■ Obtained 2-hour fire resistance certification from the Ministry of Land, Infrastructure, Transport and Tourism ■ Extremely simple construction with a straightforward mechanism ■ Shortened construction period ■ Easy design of utility routes without beams ■ Can accommodate barrier-free design ■ Approved construction method *For more details, please refer to the materials. Feel free to contact us with any inquiries.

• Housing structure technology/long-term superior housing technology

The Fujimori company's square unit chimney, High Stack, is a zero-asbestos product primarily made of zonolite-type calcium silicate. Additionally, calcium silicate molded products are excellent chimney lining materials that are lightweight and easy to process.

• Incinerators and chimneys

The Fujimori company's steel unit chimney, High Stack, is a zero-asbestos product primarily composed of zonolite-type calcium silicate. Additionally, calcium silicate molded products are excellent chimney lining materials that are lightweight and easy to process.

• Incinerators and chimneys

Excess water and air near the concrete formwork are discharged outside the formwork through the filter sheet. There is a construction procedure manual on our company website.

• Concrete curing material
• Formwork material

In recent years, there has been an increase in building "earthquake-resistant reinforcement work," "conversion," and "equipment updates." While the structure is aging, the chimneys are also deteriorating, but it is often the case that chimney renovations are not considered. Additionally, even when chimney renovations do occur, it may be unclear where to seek advice. Our company, Fujimori Industries, believes that our experience with chimney renovations can be of assistance.

• Incinerators and chimneys

R Type 【NETIS Registration Number: CG-100007-V】 - It is possible to perform wet curing on the slopes and sides of structures. - The wet curing layer ensures an initial water retention of 800ml per square meter. - With a weight of approximately 800g/m2, it is lightweight, and even after water supply, it weighs about 1,600g/m2, making installation on the curing surface easy. S Type 【NETIS Registration Number: CG-090024-V】 - It is suitable for curing the top surface of structures, but since it has water-retaining materials, it can also be used on gentle slopes. - The wet curing layer ensures an initial water retention of 1,300ml per square meter. - With a weight of approximately 600g/m2, it is lightweight, and even after water supply, it weighs about 1,900g/m2, making installation on the curing surface easy.

• Concrete curing material

We are in a leading position in the tunnel waterproofing sheet industry and provide reliable consulting sales that match the needs of the field, ensuring safety and excellent cost-effectiveness in tunnel excavation support methods. We are not only focused on new construction projects but also seek new possibilities through innovative method proposals in tunnel renovation work. Through our unique research and development, we will accurately respond to the needs of the civil engineering sector.

• Waterproof sheet
• Coating film waterproofing material/permeable waterproofing material

The building materials business has three facets: engineering functions that propose solutions to customers based on years of accumulated technology and knowledge, production functions that manufacture products in-house, and facility functions. This allows us to respond promptly to diverse needs while leaving behind many achievements and trust. This is the result of continuously executing a "new form of consulting sales" that goes beyond mere product sales, consisting of a systematic product lineup and ongoing services with corresponding systematized information. Moving forward, we aim to create innovative products that open up new possibilities in the fields of architecture and facilities, engaging in research and development of cutting-edge products to accurately meet customer needs with more rational and reliable offerings.

• Incinerators and chimneys