小野測器 List of Products and Services

At Ono Instruments, we offer sensors and accelerometers from the 'NP-3000 series' that extract mechanical vibration amounts as electrical signals proportional to vibration acceleration. We have 17 types available, ranging from ultra-compact models to three-axis types that can simultaneously capture vibrations in the XYZ directions, as well as waterproof and high-sensitivity types. You can choose the appropriate detector based on your intended use, conditions, and application. Additionally, since the detector itself has a built-in preamplifier, it allows for relatively inexpensive construction of the sensor signal input section and can be directly connected to our FFT analyzers and other analysis equipment. (Note that it may not be possible to connect directly to older FFT analyzers and similar analysis equipment.) 【Features】 ■ As a size-modulated vibration detector, no reference point is needed for measurement. ■ Compact and lightweight, making it easy to attach to measurement targets and simple to handle. ■ Wide dynamic range, capable of measuring from very small accelerations. * A vibration meter consisting of mass (M), spring constant (K), and viscous resistance (C). * For more details, please refer to the PDF materials or feel free to contact us.

• Vibration and Sound Level Meter
• others

At Ono Instruments, we offer the accelerometer 'NP-2000 Series', which extracts mechanical vibration measurements as electrical signals proportional to vibration acceleration. We have seven types available, ranging from ultra-compact types to general-purpose and high-temperature compatible types, allowing you to select the appropriate detector based on your intended use, conditions, and application. As it is a charge output type, a charge amplifier is required; however, compared to built-in preamplifier types, it can generally be used at higher temperatures. 【Features】 - As a size-mode* vibration detector, no reference point is needed for measurement. - Compact and lightweight, making it easy to attach to measurement targets and handle. - Wide dynamic range, capable of measuring from small accelerations. - Strong mechanical strength, recommended for measuring large accelerations and shock accelerations. - Capable of measuring waveforms containing wide-band frequency components without distortion. - Usable at higher temperatures compared to built-in amplifier types. *Refers to a vibration meter consisting of mass (M), spring constant (K), and viscous resistance (C). *For more details, please refer to the PDF document or feel free to contact us.

• Vibration and Sound Level Meter
• others

The "TM-3100 Series" is a digital tachometer that can add functions according to applications to accommodate a diverse range of measurement targets. The standard model includes four basic functions for rotational measurement (rotational speed display, BCD output, analog output, comparator output), and by adding optional cards, it can be customized to meet customer needs. By adopting a fluorescent display tube instead of the conventional LED method, we have achieved enhanced durability and significantly improved visibility. 【Features】 ■ Customization according to application is possible with the addition of optional cards ■ High compatibility with computers and control devices ■ Diverse judgment outputs ■ All models comply with CE marking *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "HT-3200" is an easy-to-use, high-performance compact handheld contact digital tachometer. It has a wide measurement range from 0.5 r/min at low speeds to 10,000 r/min, and measurement results can be stored in internal memory as a history, allowing for up to 10 entries, which is convenient for post-measurement verification and recording. It can also be used as a peripheral speed meter by utilizing a peripheral speed ring. Additionally, we offer the non-contact "HT-4200" and the dual-purpose contact/non-contact "HT-5500" in our lineup. 【Features (HT-3200)】 ■ Contact type ■ Automatic repeated measurement with changing display values every second while the measurement switch is pressed ■ Memory function for convenient confirmation of measurement results ■ Ergonomically designed for a comfortable grip and ease of use ■ Can also be used as a peripheral speed meter with the use of a peripheral speed ring ■ Final measurement value held on display for approximately 30 seconds after measurement *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "LV-7000 Series" is a high-sensitivity, high-response laser surface velocity meter that detects the speed, speed variations, and travel distance/length of moving objects such as lines and rotating bodies without contact. Since it can detect without contact, it can be easily installed and measured in locations that were previously difficult to measure. Additionally, by using this product, it becomes possible to evaluate product characteristics that were previously hard to assess more accurately, allowing for better understanding of phenomena, selection of materials, improvement of component quality, and reduction of waste materials. 【Features】 ■ Complies with laser safety class 2 for high-sensitivity detection ■ Measurement possible without load and without contact ■ High functionality with simple operation *For more details, please refer to the PDF document or feel free to contact us.

• Other measuring instruments
• others

The "LV-1800" is a non-contact vibration meter that achieves over 10 times the sensitivity of conventional products due to a newly designed interference optical system, and it also allows for confirmation of the laser irradiation position with a built-in camera. In addition to quickly and easily detecting vibrations, when combined with a waveform analysis device (FFT analyzer), it can not only measure vibrations but also accurately capture, visualize, and analyze the state of the vibrations. 【Features】 ■ High-sensitivity camera integrated with the sensor ■ Significantly improved detection sensitivity ■ Wide range of measurement targets ■ Easy to grasp both the focal position and detection status at a glance *For more details, please refer to the PDF materials or feel free to contact us.

• Vibration and Sound Level Meter

The "VC-2200/3200 Series" is a high-performance signal processor that inputs signals from acceleration detectors, enabling the detection, measurement, and judgment of machine abnormalities, vibration level confirmation, and level determination based on vibration values. Equipped with features such as TEDS, it reduces setup time and prevents configuration errors. It enables high-functionality and high-precision vibration monitoring at low cost across various fields, including maintenance and continuous monitoring of production equipment. 【Features】 ■ TEDS function (effective when connected to an acceleration detector with TEDS functionality) ■ Logarithmic bar indicator (improves visibility during small vibration detection) ■ Headphone volume MUTE function (protects ears from impact sounds during sensor attachment) 【Use Cases】 ■ Determining product quality based on vibration ■ Detecting abnormal machine operation ■ Monitoring abnormalities in bearings, gears, etc., of production equipment ■ Detecting tool blade breakage and wear *For more details, please refer to the PDF document or feel free to contact us.

• Monitoring and Control Equipment
• Vibration and Sound Level Meter
• others

The "MI-5420" is a dedicated microphone probe that enables sound source visualization using our 4-channel beamforming software (BF-3100), even with a limited number of microphones, by employing a unique beamforming algorithm. By using probe heads for high and low frequencies, the visualizable frequency range has been expanded to 500 to 8000 Hz. Additionally, the microphone amplifier that was previously required for Ono Sokki's conventional systems is no longer necessary, achieving portability and reducing implementation costs. We offer two types, 60mm and 120mm, and the high-frequency and low-frequency probe heads can be swapped according to the application for measurement. 【Features】 ■ Ergonomic design suitable for handheld measurements ■ Enables measurements across a wide analysis frequency range ■ Sound source exploration possible with four microphones ■ Real-time monitoring of sound source conditions (5 times/second) ■ Supports transient sounds and single sounds *For more details, please refer to the PDF materials or feel free to contact us.

• Other measuring instruments
• others

The "LA-1411/1441/4441" is a high-cost-performance sound level meter packed with numerous features that emphasizes on-site measurement. With a wide linearity range of 100 dB, it simultaneously measures and displays seven noise indicators, including the time-averaged sound level, in response to a wide range of sound level fluctuations without needing to switch level ranges. Additionally, the microphone section of the sound level meter can be separated from the main unit, allowing for long-distance extension of the microphone section using a dedicated coaxial cable. The curved body shape minimizes the effects of sound reflection, and the easy-to-read, intuitive operation menu enhances usability, achieving a more user-friendly interface than ever before. 【Features】 ■ Simultaneous measurement and selectable display of seven noise indicators, including time-averaged sound level (Leq) ■ The microphone section can be separated from the main unit for long-distance extension using a dedicated coaxial cable ■ Easy data processing to PC (LA-1441/4441) *For more details, please refer to the PDF document or feel free to contact us.

• Vibration and Sound Level Meter

The "LA-7000 Series" is a noise meter that significantly improves operation through the adoption of a large color LCD touch panel, allowing for easy and intuitive operation to start measurements. In addition to measuring and calculating the original noise level, it is also possible to "measure while listening to the sound" during measurements. This enables safe and reliable measurements in environments where mistakes cannot be tolerated. With just one unit, it can perform noise measurement, sound recording, frequency analysis, and sound source exploration of abnormal noises, greatly enhancing the efficiency of measurement tasks. 【Features】 ■ Large, easy-to-read 4.3-inch color LCD (equivalent to a smartphone) ■ Start recording with just one tap ■ Equipped with listening function ■ Achieved a 35% reduction in size from the previous model ■ Comes with a hand strap ■ Intuitive operation via touch panel *For more details, please refer to the PDF document or feel free to contact us.

• Vibration and Sound Level Meter