ホッティーポリマー List of Products and Services

The "Trim Series" is a metal composite structure packing that protects edges and features a sealing part, combining airtightness, waterproofness, and dustproof functionality. It can be easily installed by simply sandwiching it between steel plates or resin boards. Since no adhesive is used, temporary fixing is unnecessary, simplifying the process. Additionally, because it uses resin and rubber materials, it can be selected based on the usage environment, and the use of metal in the framework provides high strength. 【Features】 ■ High strength due to the use of metal in the framework ■ No adhesives used at all ■ Removable for easy maintenance ■ Flexible for easy installation in corner areas ■ Resin materials can be colored (consultation required) *For more details, please refer to the PDF document or feel free to contact us.

• others

"Eco Trim" is an all-plastic trim with a revolutionary rigid resin framework. Since it only requires clamping and does not use solvent-based adhesives, it is an environmentally friendly product. It can be attached and detached multiple times, making it highly maintainable. Additionally, unlike conventional trims, the core material does not rust, and processes such as endless welding are also possible. 【Features】 ■ Lightweight due to the non-metal framework ■ The all-plastic design prevents the core material from rusting like standard trims ■ The surface material is an olefin-based elastomer, and the framework is polypropylene, allowing for recycling due to the compatibility of materials ■ Being made of resin, it can be colored ■ Welding processes such as endless welding are possible, including the framework *For more details, please refer to the PDF document or feel free to contact us.

• others

"HP Filament (Aroma Type)" is a 3D printer filament for FDM methods that incorporates aromatic components and enhances durability by gradually releasing these components. The effect lasts by slowly releasing the fragrance from the inside to the surface. Additionally, after being shaped by a 3D printer, it forms an ultra-thin film on the surface, preventing stickiness. Various household and commercial products that aim to maintain fragrance for as long as possible can now be produced using a 3D printer. 【Features】 ■ Superior durability compared to general fragrances ■ Available in seven colors: white, black, blue, yellow, red, green, and orange ■ Two types of scents: "Floral" and "Soap" *For more details, please refer to the PDF document or feel free to contact us.

• others

"Eco Flex Seal" is a soft resin product made from polylactic acid. By using a unique blend of polylactic acid and special elastomers, we have made it possible to produce an environmentally friendly product with very low hardness. Additionally, it has a unique property of being flexible while not stretching in the length direction. This characteristic allows us to give rigidity to gaskets that were difficult to install due to stretching during installation, while also enabling the production of flexible gaskets. 【Features】 ■ Excellent environmental performance ■ Possible to produce long lengths due to extrusion molding ■ Very good flexibility for a resin made from polylactic acid ■ Can be made rigid ■ Certified product by the Japan Bio-Plastics Association *Registration Numbers: No.188 for 3D, No.199 for sheets *For more details, please refer to the PDF materials or feel free to contact us.

• others

"HP Sponge" is a groundbreaking product made by foaming resin using our unique blending technology. It has excellent compression set under general environmental conditions, and since it is originally low in specific gravity, it can be further lightweight, making it possible to reduce the weight of the product. Additionally, its low volume resistivity makes it suitable for electrical insulation applications. Moreover, it allows for coloring, which is difficult with general industrial rubber, and can also be extruded into various shapes. 【Features】 ■ Excellent compression set at room temperature ■ Lower carbon dioxide emissions during manufacturing compared to rubber ■ Coloring possible due to being made of resin (upon consultation) ■ Potential for reduced production costs ■ Further lightweighting possible by foaming low specific gravity elastomers ■ Low water absorption, suitable for use as a waterproof packing *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

"Bug Tight" is a high-performance gasket that incorporates our unique technology "Sube Up" along with a special insect-repellent material from Nix Co., Ltd., providing a repellent effect. By using our "Sube Up" technology, we can limit the use of expensive chemicals to only the necessary areas, enabling the production of repellent products at a low cost. 【Features】 ■ High repellent effect ■ Uses Etofenprox, which is highly safe for humans ■ Enables the production of repellent products at a low cost ■ Long-lasting effect of about 5 years in indoor environments *For more details, please refer to the PDF document or feel free to contact us.

• others
• Pest and insect control products

"Shiri Kuroon" is a night-glow type silicone rubber extrusion product that uses a specially formulated phosphorescent pigment. It achieves approximately 10 times the brightness and glow duration compared to conventional phosphorescent pigments (such as zinc sulfide types). It absorbs light from sources like sunlight and fluorescent lamps, and emits light when it gets dark. By imparting phosphorescence to silicone rubber, which possesses excellent weather resistance, heat resistance, chemical resistance, and flexibility, it can be used in various fields. 【Features】 ■ Excellent phosphorescence ■ Excellent environmental performance ■ Excellent luminescence ■ Excellent weather resistance *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

HP Filament (Aroma Type) is a filament for FDM 3D printers. Generally, fragrances tend to evaporate easily, making it difficult to achieve long-lasting effects. This product maintains its effectiveness by gradually releasing the fragrance from within to the surface. Additionally, after being shaped by a 3D printer, it forms an extremely thin film on the surface, preventing stickiness. Various household and commercial products that aim to sustain fragrance can now be manufactured using a 3D printer. *For inquiries about creating original scents, please contact us separately.

• Spatial Design

PEEK resin is a super engineering plastic with exceptionally excellent properties. HP filament (PEEK type) is a filament made from PEEK resin, which has excellent heat resistance, chemical resistance, and thermal stability, designed for FDM 3D printers. Recommended settings for molding: Extruder (nozzle) temperature: 370–400°C

• Synthetic Resin Plywood

Our company has introduced 3D printers and primarily offers products related to extrusion molding from design to mass production. We received a request for airtight pieces for building components. Due to the small lot size, it was difficult to amortize the investment in molds, so we proposed a method of creating a simple mold using polylactic acid, filling it with room-temperature curing silicone rubber, and allowing it to cure. 【Case Study】 ■ Material: Silicone Rubber ■ Initial Investment Amount (Press Mold Cost): ¥150,000 ■ Product Cost: ¥1,000 (for a lot of 5) ↓ 《Creating a mold frame with a 3D printer and molding room-temperature curing silicone》 ↓ ↓ ■ Material: Mold: Polylactic Acid, Product: Silicone Rubber ■ Prototyping Cost: Mold: ¥15,000, Product: ¥1,000 (for a lot of 5) *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company has introduced 3D printers and primarily offers products related to extrusion molding from design to mass production. We received a request for machine parts. The instruction was for a gel gasket, but to check the fit, we created a rigid part approximately 20mm in length using polylactic acid and attached a separately made gel for prototyping. 【Case Study】 ■ Material 1: Gel gasket (PP + gel), 2: PP ■ Initial investment amount (extrusion mold cost): ¥530,000- ↓ 《Created the insertion part and fitting part with a 3D printer, and made the HOTTY gel separately to attach》 ↓ ↓ ■ Material 1: Polylactic acid + HOTTY gel, 2: Polylactic acid ■ Prototyping cost: ¥90,000- *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company has introduced 3D printers and primarily offers products related to extrusion molding from design to mass production. We received a request for a water-stopping material for bathroom components. We proposed a shape that is easy to extrude, created a mold using polylactic acid, and injected room-temperature curing silicone. We created an extrusion sample of approximately 150mm in length and proposed the corner conformity. [Case Study] ■ Material: EPDM Sponge ■ Initial investment (extrusion mold cost): ¥60,000 ↓ 《Created a mold with a 3D printer and formed room-temperature curing silicone》 ↓ ↓ ■ Material: Polylactic Acid + Silicone Rubber ■ Prototype cost: ¥10,000 *For more details, please refer to the PDF document or feel free to contact us.

• others
• Waterproofing Agent

Our company has introduced 3D printers and primarily offers products related to extrusion molding from design to mass production. For products that we have received orders for in mass production, we propose inspection jigs to improve inspection efficiency and standardize the inspection level between both companies. We have received very positive feedback for the ease of inspection, and we are currently utilizing this approach. We created blocks using a 3D printer and assembled them to enhance usability. [Case Study] ■ Material: Polylactic Acid ■ Proposal for inspection jigs ■ Blocks created with a 3D printer *For more details, please refer to the PDF document or feel free to contact us.

• others

Our company has introduced 3D printers and primarily offers products related to extrusion molding from design to mass production. We received a project for setup materials for bathroom components. We proposed a shape that is easy to extrude, created a rigid part, and after applying our gel and confirming its suitability as a "gel gasket," we suggested proceeding with the mold creation, which was adopted. [Case Study] ■ Material: PP + HOTTY Gel (Gel Gasket) ■ Initial investment amount (extrusion mold cost): ¥450,000 ↓ 《Created rigid part with 3D printer and applied gel》 ↓ ↓ ■ Material: Polylactic Acid + HOTTY Gel ■ Prototype cost: ¥75,000 *For more details, please refer to the PDF document or feel free to contact us.

• Hardware Doors, Handles and Locks
• others

Our company has introduced 3D printers and primarily offers products related to extrusion molding from design to mass production. We received a project for corner covers for door parts. Traditionally, this would involve creating an extrusion mold, testing it, and then making modifications or creating a new mold based on the results. By creating prototypes with a 3D printer before making the extrusion mold and evaluating them, we were able to reduce costs through trial and error. 【Case Study】 ■ Material: PVC ■ Initial investment (extrusion mold cost): ¥650,000 ↓ 《Prototype created with 3D printer》 ↓ ↓ ■ Material: Polylactic acid ■ Prototype cost: ¥10,000 *For more details, please refer to the PDF document or feel free to contact us.

• Hardware Doors, Handles and Locks
• others

In the production of three-dimensional products using PEEK (polyether ether ketone), injection molding is the mainstream method for large lots, while machining is predominant for small lots. For three-dimensional products made of PEEK, we have started contract processing using FDM (Fused Deposition Modeling) 3D printers with PEEK filaments manufactured by our company. This significantly reduces waste and allows for cost reduction. Additionally, with 3D printing, it is possible to create hollow or honeycomb structures internally, enabling material cost reduction and weight savings compared to machining, which can only produce solid forms. 【Features】 - Weight Reduction: It is possible to achieve weight savings by creating hollow or honeycomb structures! - Cost Efficiency: There is no material waste from machining, making it cost-effective! - Precision: Production is possible at the intermediate level of JISB0405! (Consultation required) - Innovation: Production using the FDM method allows for shapes that cannot be achieved through machining! *Please inquire as there may be limitations based on the shape. *If we are unable to produce after receiving an order, we will not charge for the costs incurred. For more details, please download the catalog or contact us directly.

• Subsidiary materials
• others

"Polybutadiene tube" is a thermoplastic elastomer tube that possesses the properties of both plastic and rubber. It is lightweight, rubber-like, and has non-slip properties, with good gas permeability, transparency, and excellent flexibility. Due to its crystalline resin, it can reduce the adhesion of infusions to the inside of the tube compared to PVC tubes when used for infusion. Additionally, since it does not contain plasticizers, it is suitable for use in products for infants and pregnant women, and it is appropriate for medical use as it does not absorb APIs (active pharmaceutical ingredients). 【Features】 ■ Excellent environmental properties ■ Good transparency ■ Compatibility for medical use ■ Flexibility *For more details, please refer to the catalog or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

"Hottiesofura" is a cellular rubber that has been given resilience with ultra-low rebound and low hardness. It is effective as a sealing material, insulation material, and protector. Being a product made from foamed EPDM with continuous bubbles, it is very soft, low-compression load material of high quality. Additionally, it is produced using a continuous extrusion vulcanization line, so there are no length restrictions, and it offers excellent cost performance. Its applications are wide-ranging and diverse. We can accommodate requests regarding color and hardness, so please feel free to consult with us. 【Features】 ■ Ultra-low rebound ■ Ultra-low hardness ■ Excellent weather resistance ■ Resilience ■ Low water absorption *For more details, please refer to the catalog or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

The "Silicone Trim" is a packing primarily used in medical devices, testing equipment, and inspection instruments. This product, which protects edges and has a sealing part, combines airtightness, waterproofness, and dustproof functions. Additionally, it achieves the creation of a trim with high heat resistance, high chemical resistance, and long lifespan due to the properties of silicone rubber. Although silicone rubber has lower adhesive properties compared to other synthetic rubbers, its core structure allows for easy installation without the use of adhesives, making it easy to remove as well, thus providing excellent maintainability. It can be widely used according to the intended purpose. 【Features】 ■ Chemical resistance ■ Easy installation ■ Good maintenance ■ Colorability *For more details, please refer to the catalog or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

The "Gergasket" is a sealing material that combines the vibration-damping function of gel and the water-tight function of elastomer, molded simultaneously. Its primary purpose is to improve usability, and since it is an extruded product, there are no length restrictions. The material is an environmentally friendly elastomer, making it recyclable, and it is safe to use as it does not contain any chemical substances. 【Features】 ■ Excellent vibration-damping properties ■ Easy installation ■ Recyclable ■ Low cost ■ Temperature characteristics *For more details, please refer to the catalog or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

The "HOTTY TPX Mandrel" is a mandrel (round rod) extruded from TPX (poly(methyl pentene): PMP). TPX (poly(methyl pentene)) is a resin with excellent transparency, heat resistance, and chemical resistance. As a mandrel, it has a low surface tension of 24 dyne/cm, which contributes to its excellent moldability and resistance to contamination. In addition, it has distinctive thermal properties, excelling in heat aging resistance and steam (boiling water) resistance. Utilizing these characteristics allows for a reduction in the rubber vulcanization process time and processing costs during the production of rubber hoses, and due to its low water absorption rate, the dimensional accuracy of the mandrel is high, enabling excellent inner diameter precision of the rubber hoses. 【Features】 ■ Excellent moldability ■ Steam resistance ■ Chemical resistance ■ Excellent cost-effectiveness ■ Improved productivity *For more details, please refer to the catalog or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials

"Polybutadiene tube" is a lightweight, rubber-like tube that has non-slip properties. It has good gas permeability and transparency, and is an excellent flexible product. Due to its crystalline resin, it can reduce the adhesion of infusions to the inside of the tube compared to PVC tubes when used for infusion. Additionally, because it does not contain plasticizers, it is suitable for use in products for infants and pregnant women, and it is appropriate for medical use as it does not absorb APIs (active pharmaceutical ingredients). Furthermore, it complies with Ministry of Health, Labour and Welfare Notification No. 20 for food packaging applications. In terms of environmental impact, there are no harmful gases such as chlorine gas or nitrogen compounds generated when incinerated. *For more details, please refer to the PDF materials or feel free to contact us.*

• Subsidiary materials
• Reinforcement and repair materials
• others

LM-ETFE (ethylene-tetrafluoroethylene copolymer) resin is a thermoplastic fluoropolymer that possesses characteristics not found in conventional ETFE, such as low melting point and transparency. It has higher heat resistance than ETFE and can be used over a wide temperature range from -200 to 180°C. Additionally, compared to conventional ETFE, it excels in flexibility and mechanical strength, has high transparency from the visible to ultraviolet range, and features high surface smoothness, low wear, non-stick properties, and water and oil repellency, further enhancing its surface characteristics and reducing fluid resistance. It also exhibits excellent chemical resistance, electrical properties, and flame retardancy, allowing for the addition of characteristics that enhance the performance of conventional ETFE. *For more details, please refer to the PDF document or feel free to contact us.*

• Subsidiary materials
• Reinforcement and repair materials
• others

"Polycarbonate extrusions" are covers formed by extrusion molding using polycarbonate resin, which excels in transparency and heat resistance. Polycarbonate resin is a material that boasts excellent transparency, heat resistance, and impact resistance. Additionally, as a transparent rigid resin with self-extinguishing properties, it is suitable for use as a cover material for lighting fixtures. Our company is capable of molding this polycarbonate from ultra-fine tubes to advanced custom extrusions. Please feel free to contact us. 【Features】 ■ Very high visible light transmittance, demonstrating performance equivalent to acrylic ■ Self-extinguishing properties allow for use in areas with fire hazards ■ Continuous use possible from -40 to 120°C ■ Excellent impact resistance that maintains performance even at -40°C ■ Small molding shrinkage allows for more precise molding *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

"TPX (polymethylpentene)" is a resin that excels in transparency, heat resistance, and chemical resistance. As a mandrel, it has a low surface tension of 24 dyne/cm, which contributes to excellent moldability and contamination resistance. Additionally, it possesses distinctive thermal properties, demonstrating outstanding heat aging resistance and steam (boiling water) resistance. Leveraging these characteristics, it enables a reduction in the rubber vulcanization process time and processing costs during the manufacturing of rubber hoses. Its low water absorption rate also ensures good dimensional accuracy of the mandrel, allowing for excellent inner diameter precision in rubber hoses. Moreover, in recent years, it has gained attention as a mandrel for carbon products such as C-FRP, utilizing the aforementioned properties. While voids often occur with conventional equipment, our company has made it possible to minimize void formation using specialized production equipment. Please consult us separately regarding the sizes that can be manufactured. *For more details, please refer to the PDF materials or feel free to contact us.*

• Subsidiary materials
• Reinforcement and repair materials
• others

The "Ultra-Fine Polyimide Tube" is a tube extruded from polyimide resin (TPI) that has excellent heat resistance. Thermoplastic polyimide (TPI) excels in heat resistance, sliding properties, and environmental characteristics, with a glass transition temperature of approximately 250°C, which provides superior properties compared to other thermoplastic super engineering plastics. 【Features】 ■ Heat Resistance: Usable up to 240°C ■ Sliding Properties: Low dynamic friction coefficient and excellent wear resistance ■ Environmental Characteristics: Lower outgassing and metal impurities compared to other super engineering plastics, making it suitable for clean applications ■ Stability: Excellent plasma resistance, radiation resistance, and electrical properties *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

PEEK (Polyether Ether Ketone) resin is a super engineering plastic with very excellent properties, but special techniques are required to mold stable tubes through extrusion. We sell standard sizes, but we can also accommodate custom requests. 【Features】 ■ Heat resistance: Continuous use is possible in a temperature environment of 260°C ■ Wear resistance: Exhibits outstanding wear resistance with a very low friction coefficient ■ Chemical resistance: Shows excellent resistance to various chemicals ■ Hydrolysis resistance: Demonstrates resistance to water and steam under high temperature and high pressure ■ Impact resistance: Exhibits high strength even in harsh environments ■ Flame retardancy: Has UL V-0 flame retardancy *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

Water-absorbent rubber (nonbee) is a blend of water-absorbent resin that expands by absorbing 100 to 1000 times its own weight in water, mixed into vulcanized rubber. This water-absorbent resin is safe and hygienic, and is also used in products like baby diapers.

• Subsidiary materials
• Reinforcement and repair materials
• others

It is a colored rubber molded by continuous extrusion vulcanization, with EPDM as the main material. The properties are solid rubber and foam rubber.

• Subsidiary materials
• Reinforcement and repair materials
• others

The "Sube Up Coat" is a cost-effective product that prevents sticking and reduces sliding resistance by simultaneously coating continuous extruded rubber products. With a low friction coefficient of 0.3, it offers excellent sliding properties. It is resistant to dust and dirt, and its smooth surface prevents the material from wrinkling. It has a wide range of applications, including construction parts, automotive parts, electronic device components, and leisure goods. 【Features】 ■ Low friction coefficient of 0.3, providing excellent sliding properties ■ For foamed rubber, a fluorine-impregnated coating film that follows elastic deformation ■ Resistant to dust and dirt, and its smooth surface prevents the material from wrinkling ■ Effective in preventing sticking, squeaking sounds, and reducing sliding resistance ■ Very effective even when oils and greases cannot be used *For more details, please refer to the PDF materials or feel free to contact us.

• others
• Subsidiary materials

"Super View Up" is a transparent extrusion product developed with a new concept using polyolefin materials. It can be used as a substitute for PVC tubes, for devices that require transparency and design, as well as for packings, gaskets, sealing materials, and protectors in buildings. It is also possible to mold irregularly shaped extrusion products. Please feel free to contact us for more details. 【Features】 - Excellent weather resistance, impact resistance, and scratch resistance, with low odor - Free from plasticizers and halogens - Superior flexibility and heat resistance, exhibiting excellent rubber elasticity without cross-linking - Shows very strong resistance to acids, alkalis, and alcohols - Irregularly shaped extrusion products can also be molded *For more details, please refer to the PDF materials or feel free to contact us.

• Piping materials (plastic pipes)
• others

It can be easily installed just by sandwiching it between a metal plate or a resin plate. Also, since no adhesive is used, temporary fixing is not necessary, allowing for simplification.

• Subsidiary materials
• Reinforcement and repair materials
• others

The "Silicone Trim" protects edges and features a sealing part, providing airtightness, waterproofing, and dustproof capabilities. Additionally, it enables the creation of trims with the characteristics of silicone rubber, such as high heat resistance, high chemical resistance, and long lifespan. Moreover, it is available in seven colors and a silicone (glow-in-the-dark) type, and since it is made from silicone rubber, it can be made conductive upon request. 【Features】 ■ Excellent heat and chemical resistance ■ Easy to install as it can simply be sandwiched between metal or resin plates ■ Does not use any adhesives, preventing contamination ■ Can be removed for easy maintenance ■ Color customization is possible upon request (consultation required) *For more details, please refer to the PDF document or feel free to contact us.

• Reinforcement and repair materials
• Subsidiary materials
• others

The "Sube Up Tube" is a polyolefin-based extruded tube that has a specially formulated low-friction resin molded on its inner surface. 【Features】 ■ The smooth inner surface allows for easy wire threading. ■ Extruded products with special low-friction resin processing on both the inner and outer surfaces are also possible. ■ Excellent wear resistance, weather resistance, scratch resistance, dirt resistance, and low odor. ■ Environmentally friendly as it does not use plasticizers or halogens. ■ Chemical resistance shows strong resistance to acids, alkalis, and alcohols. ■ The special low-friction resin adheres as a thin film, providing excellent cost performance. *For more details, please refer to the PDF document or feel free to contact us.

• Piping materials (plastic pipes)
• others

"HOTTY Gel" is a sticky type and non-sticky type extruded product with a very soft jelly-like consistency. 【Features】 ■ Continuous molding process allows for long lengths ■ Ultra-low hardness product provides excellent vibration absorption ■ Helps reduce noise ■ Available in both sticky and non-sticky types ■ Stickiness can be restored by washing with neutral detergent and drying ■ Can be produced in both transparent and colored products ■ Does not fall under Rohs regulations or PRTR designated chemicals ■ Hardness and stickiness remain unchanged even at -30°C *For more details, please refer to the PDF document or feel free to contact us.

• others
• Subsidiary materials

"Plant-derived polyamide tubes" are nylon tubes made from castor oil, which is contained in the seeds of the castor plant. They have superior properties compared to nylon 6 and 6,6. [Features] ■ Usable from -40 degrees to 130 degrees ■ Density of 1.03g/cm3, enabling lightweight products ■ Excellent flexibility ■ Excellent chemical resistance ■ Allows continuous use at approximately 90 to 100 degrees ■ Excellent impact resistance *For more details, please refer to the PDF materials or feel free to contact us.

• Piping materials (plastic pipes)
• others

"HOTTY Statle" is a suitable product for areas that require static electricity measures and dust and contamination prevention. Not only does the surface have conductive properties, but the material itself also possesses these characteristics, enabling coloring that was impossible with carbon, as well as improving durability that was difficult with surfactants and antistatic agents. Additionally, due to minimal outgassing, it can maintain static electricity performance semi-permanently. Furthermore, it is possible to impart these properties to materials ranging from vinyl chloride to high-performance resins. 【Features】 ■ Static electricity performance is exhibited throughout the entire product, not just on the surface through coating or vapor deposition. ■ As an extruded product, it allows for long lengths. ■ Tubes and custom shapes can also be produced. ■ Low-contamination product that does not produce bleed or missing materials. ■ Excellent durability against repeated wiping and washing. *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• others

"Eco Nennen" is an extruded flexible sealing material that is environmentally friendly and achieves a V-0 rating in the UL flammability test, with unprecedented hardness resistance. It can be molded into various shapes, comparable to general polyolefin-based elastomers. It is suitable for sealing materials, gaskets, and packing in electronics-related applications. 【Features】 - Achieved V-0 in UL flammability test standards - Does not use RoHS regulated substances - Very low smoke and carbon monoxide emissions - Good colorability due to being a resin - Capable of producing low hardness products *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials
• others

The "Silicone Rubber Coated PEEK Tube" is a revolutionary composite extrusion product made from silicone rubber and PEEK resin. *In addition to silicone rubber, tubes coated with elastomers can also be produced. 【Features】 ■ Excellent sealing performance due to the silicone rubber or elastomer coating ■ Capable of providing excellent interference performance ■ Even when high-temperature liquids flow through the PEEK tube, heat is less likely to transfer outside ■ Design aesthetics can be added ■ Excellent flexibility ■ Thin-walled design of PEEK resin allows for superior cost performance *For more details, please refer to the PDF document or feel free to contact us.

• Piping materials (plastic pipes)
• others

The material of the "Sube Up Decorative Long Waterproof Cover" can be selected from olefin-based elastomers and styrene-based elastomers. Super View Up, which is an olefin-based elastomer, has high transparency and excellent weather resistance, but there are limitations to the freedom of shape design. 【Features】 ■ Suitable for outdoor decorations due to its long length and soft material ■ Significant cost reduction possible with a substantial reduction in assembly time ■ Unlike silicone rubber, it has good adhesion with double-sided tape and is resistant to tearing ■ The ends can be treated with welding, eliminating the need for waterproof caps unlike silicone rubber ■ Recyclable and does not produce dioxins when burned *For more details, please refer to the PDF document or feel free to contact us.

• Subsidiary materials
• Reinforcement and repair materials

The "HP Filament (High Strength Type)" is an FDM 3D printer filament that incorporates Tochuu Elastomer into PLA (polylactic acid) filament to enhance impact resistance. By blending Tochuu Elastomer with PLA, the impact strength is improved by approximately 30%. *Tochuu Elastomer is a registered trademark of Hitachi Zosen Corporation. 【Features】 ■ Impact Resistance: Improved by approximately 30% compared to standard polylactic acid. ■ Excellent Environmental Properties: Both polylactic acid and Tochuu Elastomer are plant-based, allowing for the production of environmentally friendly products. ■ Release Properties: Easy to release from the printed product. *For more details, please refer to the PDF document or feel free to contact us.

• Architectural Models

"HP Sponge" is a revolutionary product made by foaming resin using our unique formulation technology. It has excellent compression set characteristics under general environmental conditions. Additionally, since the elastomer is inherently low in specific gravity, it can be further lightweight, making it possible to reduce the weight of the product. Its low volume resistivity makes it suitable for electrical insulation applications. Moreover, it allows for coloring, which is difficult with general industrial rubber, and it can also be extruded into various shapes. Our special lubricating resin, "Sube Up," enhances sliding properties, anti-sticking properties, and resistance to contamination. Please feel free to contact us. 【Features】 ■ High resilience: Excellent compression set at room temperature, demonstrating performance comparable to EP. ■ Environmental friendliness: Emits less carbon dioxide during manufacturing compared to rubber, making it environmentally friendly. ■ Colorability: Unlike rubber, which is difficult to color, it can be colored due to being made of resin (subject to consultation). ■ Cost-effectiveness: Different manufacturing methods from rubber sponge allow for reduced production costs. ■ Lightweight: Further weight reduction is possible by foaming low specific gravity elastomers. ■ Low water absorption: Low water absorption makes it suitable for use as a waterproof packing. *For more details, please feel free to contact us.

• others

The "HP Filament (Super Flexible Type)" is a soft filament created from a unique blend of polylactic acid and elastomer. While it is soft, it has a core that is close to that of a hard filament, and it does not stretch like typical soft materials, making it suitable as a filament for FDM 3D printers. 【Features】 ■ Flexibility: Capable of creating highly flexible objects ■ Stability: Allows for stable and high-precision modeling ■ Functionality: Can be used as support material, etc., depending on the settings ■ Colorability: Can be colored *For more details, please refer to the PDF document or feel free to contact us.

• others

"Hottiesofura" is an ultra-low hardness continuous extrusion foamed product that is effective as a sealing material, insulation material, and protector. It is a product made from foamed EPDM with continuous bubbles, making it very soft and a low-compression load material. Applications include gaskets, packing, sealing materials, sound-absorbing materials, and insulation materials for automobiles, civil engineering, construction, and various precision instruments. The range of applications is broad and diverse. We can discuss colors and hardness, so please feel free to contact us. 【Features】 - Very soft and low-compression load material - So soft and high-quality that it cannot be measured even with a hardness tester for foamed materials - Minimal degradation from ultraviolet rays and ozone, and excellent heat resistance - Manufactured using a continuous extrusion vulcanization line, so there are no length restrictions - Excellent cost performance *For more details, please refer to the PDF materials or feel free to contact us.

• others

The "Gergasket" is a composite extrusion damping material designed to improve usability by simultaneously molding the damping and waterproofing functions of gel with elastomers. 【Features】 ■ Enhances the damping and sealing properties of functional components in addition to the characteristics of Hottigeel ■ Allows for easy installation by combining mounting parts ■ Compatible with double-sided tape ■ Recyclable ■ Excellent cost performance ■ Free from RoHS regulated and PRTR designated chemicals ■ Hardness and adhesiveness remain unchanged *For more details, please refer to the PDF materials or feel free to contact us.

• others